IOS 6 on my 4S won't connect with my 2009 Acura TSX

After upgrading  to IOS 6 on my 4S, suddenly my ipod connection with my 2009 Acura TSX will not connect.  It says "unsupported."  Please help me Apple.

When I connect the Mac directly to the modem it will connect. My other devices will not connect to the Mac when it's wired to the modem.
When the airport is connected to the modem all devices and the Mac will connect to it.
At some point, the airport will drop the internet connection, but the green ligjht on the airport stays lit. Diagnostics show it's not connected to the internet. iOS will connect to the network at that time, so will Mac, but none can acheive internet connection.
My ISP is xplornet as I am rural Canada. Spoke to them yesterday and thier end shows I have a connection, so they asked me to power cycle the airport and it connected no issues. They also said if it happens again, as in drops during the night, that it's likely my router that is the issue. My signal is great, the waether is sunny and clear and nothing is blocking my reciever on the roof...and I am sad becasue I lubs the internets.

Similar Messages

  • IPod won't play in my 2009 Acura TSX since last update

    I have the 120GB ipod with about 2900 songs in it. Since downloading the last update I can no longer play the songs in the car. I get "unsupported version" or "no bluetooth audio". Anyone know a cure for this. I don't want to be limited to mp3's.

    I do not know what Kneil31 is saying. When you restore via iTunes the iOS firmware on the iPod gets erased and reinstalled.
    To resolve the error see:
    See:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore
    Have you went to Sony's support site? Sometimes an iOS update will break compatibility. In that case you have to wait for either an update to the firmware on the dock or an update to the firmware on the iPod. I doubt there will b e anymore update for a 4G iPod

  • Tried to update to newest version. I got error because i didn't have this recovery program disc that was supposed to come with the purchase but it didn't and now my ipod touch 8gb won't connect with itunes and is stuck on a connection with itunes screen

    I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.

    oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-

  • After lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

    after lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

    I've had a similar problem.  On my first boot up after installing 10.7.4,  Firefox would not open.  Crashed every time.  Safari was not affected.  I have no idea if it was related to the flash plugin, but I did install a the latest version of that a couple of weeks ago. 
    Here's what fixed it: a second boot up.

  • Deskjet Advantage 3540 (Envy 4500): Computer won't connect with printer during software installation

    I just bought this printer and I am trying to install it by using the HP installation CD but I am running into difficulties to complete the process. The problem is that the computer won't connect with the printer (but my printer connects fine with my Wi-Fi network) and installation does not complete.
    The HP software installation process appears to go  normally (at least no error messages are shown) but when it gets to the part where it asks me how I would like to connect to the printer (Wireless or USB cable) I get an error message when I select Wireless Mode. My printer appears listed but as soon as I select it, a dialog is shown stating that "network installation could not be performed".
    Below are the dialogs and what happens (text is in portuguese but you get the idea)
    Dialog 1: selecting wireless connection mode
    Dialog 2: printer appears in list and I select it
    Dialog 3: Error message is shown, no further details
    Here are some more facts:
    (1) Printer connect fines with my Wi-Fi network: the connection details are correctly shown in its display (Wi-Fi SSID and IP 192.168.0.6) ;
    (2) If I go to a web browser in my computer and type in the IP address, I can access the printer's webpage fine;
    (3) I've tried uninstalling and reinstalling HP software;
    (4) I've resetted my router;
    (5) I've executed "HP Print and Scan Doctor" utility and it states my software hasn't been installed (which I don't understand) and it tries to download HP software and install one more time and I get to the error.
    (6) If I go to "Start" menu, I can see the HP group is empty (installation only creates icons on my desktop). See picture below:
    My OS is Windows 7 64 bit Ultimate (Service Pack 1)
    EDIT: I've just discovered the inkjet Advantage 3540 and Envy 4500 appear to be the same printer, each target to a different market.
    Help is much appreciated as I tried a lot of things to make this printer work wirelessly with my computer but without success.
    Thank you,
    Joao Pedro

    Hi JoaoPedro,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Sorry to hear that you are having installation issues.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thank you for your time
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network.

    I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network." I seem to need to enter a security key/passphrase to connect to the PC. Where do I find them?
    Thanks for your help.

    I assume that you have Wireless Security enabled on your AirPort's wireless network. The issue maybe that the PC is unable to use the WPA password itself and will require using the Equivalent Network Password instead.
    To get this password, you will use the AirPort Utility from the MacBook:
    Start the AirPort Utility > Select the AirPort base station > Manual Setup
    Now, before doing anything else, go up to the utility's menu bar at the top of the screen, and then, choose "Base Station," and then, Equivalent Network Password from the drop-down menu. You will see two items: 1) WPA Password, which should look familiar to you, and 2) WPA Pre-Shared Key. It should be a long hexidecimal set of numbers and letters. Jot down this second item.
    You will want to use the value you just jotted down when entering the password from the Windows Visa PC.

  • Microsoft Exchange won't connect with my iPhone (it's saying the password is incorrect, but it shouldn't be), now I can't delete that inbox on the phone.  Help??

    Microsoft Exchange won't connect with my iPhone (it's saying the password is incorrect, but it shouldn't be), now I can't delete that inbox on the phone.  Help??

    Turn off wifi.  Use wireless signal. reenter password at settings.  This should work.  Turn wifi back on if you wish.  Wait for next occurrence within hours or days.  Have not found a permanent preventive solution.  Thinking of replacing my four year old wireless router.

  • My iPhone won't connect with my computer or charge. How can I fix this?

    My iPhone won't connect with my computer. It also will not charge. I changed the white charging cord, but I have the same problem. I connected other devices to the USB and they work. It's strictly the iPhone.
    How can I correct this?

    I forgot to mention, the iPhone does charge via wall plug.

  • Since updating to iOs 7.0.4 facebook will not connect with candy crush saga.

    After updating my Ipad 2 to iOs 7.0.4 while on Facebook it won't connect to Candy Crush Saga. I can connect to that game while NOT on FB but it takes me to previous levels and I don't want to go backward! Please help!

    You may want to try this:
    1. Backup iPad
    2. Setup iPad as new (Settings>General>Reset>Erase all content and settings)
    3. Test iPad thoroughly
    4. If everything is fine, restore backup to iPad

  • What to do when your Game Center won't connect with the game?

    My game center won't connect to the game I'm trying to play and what is happing is the game would come one. But when its loading it will stop right in the middle of it and won't do anything. I don't know if its the game or game center. I believe its the game center because it doesn't open the apps inside of it on the first page. What should i do?

    Hey GarretTAT!
    Here is an article that will help you troubleshoot this issue with Game Center:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/ts3970
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Tablet won't connect with static LAN IP address

    Today I updated my Xperia tablet (model SGP311) to Android 4.4.2 (kernel version 3.4.0-perf-g32ce454).
    My tablet no longer connects to my home wi-fi network if I assign it a static LAN IP address. It connects fine if I use DHCP. But I prefer to assign my devices static IP addresses when possible.
    I have tried forgetting and re-connecting to my LAN several times without success. The static IP address worked fine until today's update.
    Any ideas?

    sunnhausl wrote:
    I tried that already, too! New development...I have the same problem in my office now. So, clearly, it is a problem with my iTouch. It recognizes the networks, won't connect, and when I go into look at the network, there is not data (IP address, etc.) It's just blank. HELP!
    You could try restoring the S/W on your iPod Touch. If that doesn't work you may need to talk to Apple about repair.

  • 3110 Classic won't connect with my PC

    I'm having problems with my 3110. Whenever I plug it in under USB mode, it gets detected by my PC an I can store files into it. But when I use Nokia Mode so that I can use the PC suite, my PC can not detect it. I'm using a USB data cable for both but it can only be detected as a USB drive and not as a phone under Nokia mode. I'm using the latest PC suite version.
    Can anyone help me out? I got a 2gb card and I can't fill it up with songs and videos coz it wont synch with the PC.
    Help will be much appreciated.
    Thanks!

    Thanks to everyone who replied. It's been awhile since I viewed this forum.
    Scoobyman: Yeah, it was a clean install and still it won't connect. I was really bummed out that Nokia would release a product with connectivity issues. But still, at least I could use it as a USB drive to do some stuff. Although, it won't upload videos... Only mp3s and other documents.
    Gleno: Yeah, that's what I did... I think I filled it up with 1.5gb already. At least that worked. Now I have music on my phone!
    Miksu: Sorry man, I have that version and it won't work... Thanks for the help though.
    Europlus: Man, you are lucky! I am using a 2gb memory card and maybe that's the problem? Although it plays my mp3's fine with no skip or lag and all of my files appear intact when I use it as a USB drive.
    Ddeian: I think you're having a worse time than I am... Hopefully someone can have a fix for this.
    Thanks guys! As for Nokia, I hope they have a fix for this. It's a good, cheap, and hardy phone. I don't want it to waste it's sturdy hardware only to fall short on the software support. Still, I love the phone and would probably be using it for quite some time.

  • MacBook Air won't connect with TimeCapsule

    I recently bought the new Time Capsule and for a while it was happily backing up both my and my wife's MacBook Airs. Then it stopped backing up my wife's computer. On investigation I find my wife's MacBook Air won't connect to the Time Capsule. When I try to select the Time Capsule as the back-up disk an error message appears: "There was a problem connecting to the server "John's AirPort Time Capsule"". I can see the Time Capsule in Finder on my wife's computer but when I click on "Connect As" I get the same error message. On my computer the Time Capsule appears in Finder as Connected, but disconnecting it doesn't make any difference to my wife's computer.
    Any help gratefully received.
    J

    First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
    From the menu bar, select
     ▹ System Preferences ▹ Network
    Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
    Try again to back up.
    If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

  • 3rd gen ipod won't connect with firewire.

    3rd gen ipod won't connect to itunes with firewire. USB connects rarely but drains battery quickly. I've rebooted the ipod and computer and updated itunes. No effect. Any remedies besides buying a new ipod.

    Answer to Question 1: - I connected the iPod with the USB, went to Disk Utility and erased the iPod. Now the iPod works with USB.
    Question 2 is still unanswered. Ideas?

  • My ipod got very low battery and now won't connect with itunes?

    My ipod got an extremely low battery and now it won't connect to itunes or charge when connected with the usb. I had not trouble connecting before this

    Let it charge for awhile. 
    Does the iPod show that it is charging?
    After charging for at least an hour try resetting the iPod.  Also see:
    iPod touch: Hardware troubleshooting

Maybe you are looking for