IOS 6 update, problems with connecting to MacBook

After installing the ios 6 update for my iphone 4 i tried syncing my phone with my macbook. I learned that i needed the newest itunes (10.7) to do so. I tried downloading the new itunes but learn that i need the new Mountain lion software for my macbook as well to do so, not that big of a deal for me but i'm not sure if I can even install Mountain Lion on my macbook because of its age (bought in early 2008). I am currently running OSX 10.5.8.
So really two questions...
Can I even install Mountain Lion on my macbook?
If I can't install the new macbook software can i revert my iphone 4 back to its original software, or another version, so it will still work with my current version of itunes (10.5)? I could stand loosing the updates i got with the IOS 6 software if it meant being able to connect my phone to my computer again.

If you hold down the option key and, under the Apple menu, select "System Information"->"Network">"Wi-Fi" do you see that an AirPort card is installed? If not, your card may be dead or it may have been jostled loose.
Call back,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Similar Messages

Can anyone tell me why I can not connect my Blackberry or my iPhone to my new Macbook pro? I had no problem with my old Macbook.

Can anyone tell me why I can not connect my Blackberry or my iPhone to my new Macbook pro? I had no problem with my old Macbook.

What type of headphones were you using? I have a set of Microssft headsets, with the built-in mic and connected via USB, and have no problems.
Clinton

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

New problem with display on Macbook Pro retina (Samsung panel)

Hello All,
I am a very new people on your forum but a few weeks ago i bought a new macbook pro retina with samsung panel.
I haven't ghosting effect on my macbook but i have a new and really bad problem.
I try to found a some information on Russians forums but nobody can help me with it.
I can see an artifacts in the form of flashing pixels on all display.
It occurs in 20-30 minutes after the start of work.
Today i try to test it on game Dirt 2 and i can see defects after 2 minutes after start. So i think it can be reason with Geforce 650 but when i back to desktop and use HD 4000 i still see a problem.
This is best seen on a black screen with high backlight.
When i try to connect TV via HDMI i can't see any problem in my TV.
So i really don't know what could be the reason.
I attached the video with issue to video hosting
http://vimple.ru/579f880e8b7045e09f8fc5bc097c5e2b
Also i have a many software problem like Crashing safari and iTunes. It can be a few times per day.
I really disappointed with my new Macbook.
I haven't any problem with old 2009 Macbook pro with Snow Leopard but Mountain Lion is not working well.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Problem with connecting ipad 2 with crestron cp2e...help plss its urgent... I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while t

problem with connecting ipad 2 with crestron cp2e...help plss its urgent...
I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while the device was in auto -lock(sleep)press connect to reconnect) when i pressed again its connected with cp2e. i am using netgear wireless access point . i also has been changed access point as well as updated ipad firmware bt problem is as it is .. pls help.

Hi have you solved the issue ?
Cause I have the same problem.
Tnx

Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

Hello NiiTeye,
I'm sorry to hear you are having these issues with your iPhone. If you are having issues connecting to your car stereo via Bluetooth, you may find the troubleshooting steps outlined in the following articles helpful:
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
iOS: Troubleshooting Bluetooth connections - Apple Support
Sincerely,
- Brenden

Contribute 3: Problem with Connection Key

Hi,
I'm having a problem with connecting Contribute 3 to our web
site.
I have Contribute running on two PC's, one running XP Pro
Service Pack 1 and the other Service Pack 2, the one with SP 1 is
at home and connects fine. I used this one to generate a connection
key for my office computer (the one with SP2). Everything should be
fine, but it isn't.
The office PC refused to connect to the site: After double
clicking on the connection key and selecting Open, it presents a
dialog box with the name: Import Connection Key, and I enter a new
username, email and the password for the connection key.
When I click OK, it presents the following message: "Unknown
host. Contribute could not find the server "ftp.myhost.com". Please
check your connection information or contact your administrator."
When I click OK on this dialog box, it presents the following
dialog box: "Contribute could not verify your connection key. A
network connection to the server could not be established. Please
contact your administrator for assistance." Damn,I'm the
adminstrator and I have run out of ideas!
I can connect to the site with WS_FTP without any problems,
but I cannot do so with Contribute, neither with the connection key
containing all the FTP details, nor bypassing the connection key
and simply manually entering the FTP details.
What is going on

which windows version do you have?
connect your phone to your PC > disable your firewall and antivirus > your PC should download the drivers also you might want to try SUS
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Problem with MacMail on MacBook Air - mail with 32MB attachment appearing in "recovered messages" folder every 12 seconds

Problem with MacMail on MacBook Air
3 days ago I failed to send a mail with a large (32MB) attachment - and it is no longer in my outbox, draft mails or sent file.
BUT a copy of this same mail now appears every about 15 seconds in my "recovered messages" folder
I noticed when I received a system error saying I had a disk almost full issue - there were over 580 copies of the mail with 32MB attachment in the "recovered messages file"
I deleted them all, and deleted the Trash
BUT the message still keeps re-appearing every 15 seconds or so. So I keep deleting them.
Since then I have not been able to receive mail (altho' I am able to send) and Mail is VERY slow
I am running MAC OS X 10.6.8
I am running Mail version 4.6 (1085)

Also here's the log before it happened. As you can see there is no activity from 9:48 to 10:00 am when the sound occurred.
23/02/2014 9:48:12.792 am ntpd[52]: FREQ state ignoring -0.145411 s
23/02/2014 9:48:15.258 am WindowServer[96]: _CGXHWCaptureWindowList: No capable active display found.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000280
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319378: AirPort_Brcm43xx::powerChange: System Sleep
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319390: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
23/02/2014 10:00:04.000 am bootlog[0]: BOOT_TIME 1393167604 0
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK. Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

I am having a problem with my 2009 Macbook Pro

Hello Everyone,
I am having a problem with my 2009 Macbook Pro . A few weeks ago I plugged it into the charger after running it down to reserve battery power. It appeared to be charging, but then all of a sudden my clock and calender reset to year 2000 and then my computer blacked out and went dead. I tried to boot it up but nothing happened (literally nothing). I have tried 3 different chargers on it, but all I get is a faint green light and even after hours it still won't boot up. I have tried replacing the battery, but still nothing happens.
Any Ideas? I am pretty desperate to get my computer back up and running before school finals.

You may have to see if an authorized Apple service specialist can check over
the charging system (magsafe dc-in board, power adapter, and MacBook/Pro)
and test or run a diagnostic on it, to be sure there is no damage or failed parts.
When you attached the adapter to charge the computer, after it said it was going
to reserve power, did you shut down open applications and stop using the MB/Pro?
That would've been the thing to do, since the margin of run-time near the bottom
of the power cycle can be wrong by the gauge estimate, it can just quit.
While I have not researched your year/model/series in detail, I do know some
models of Apple portable computers have a small battery or capacitor on the
logic board, separate from the main power battery; it may need replacement.
A service provider w/ Apple training & parts would be a likely resource to fix it.
Good luck & happy computing!

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

Problem with connecting to DB2 from ADFBC

I have a problem with connection to DB2 data using ADF BC components. Everything looks fine till I run the page(JSF) to see the data of a db2 table. I created a read only view object. This view is registered in the AM and from AM the view is returning the rows without any problem. But when I am running the page which has the view as a table these errors are thrown. Please help me to fix this.
JBO-30003: The application pool (od.mft.views.MFTServiceLocal) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:336)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
## Detail 0 ##
oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:220
## Detail 0 ##
java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getConnection(DriverManager.java:545)
Thanks
Gangs

Steve, the tester works good as expected and its retreiving the rows. As I said earlier the problem is with the JSF page when I ran the page on Embeded Oc4j of Jdev the page showing the above. The exception does not show on the console.
Please let me know if you need any more details.
thanks
Gangs

IOS 6 update, problems with connecting to MacBook

Similar Messages

Maybe you are looking for