IOS 6 upgrade results in empty iPhoto thumbnails on iPad

After upgrading to iOS 6, many of the thumbnails from iPhoto for Events and Faces were blank. After restoring twice without good results I finally erased everything and setup the iPad as a new iPad. Of course this meant redownloading and organizing everything. It improved the iPhoto results...the Events seem to be okay, but some of the Faces are still missing and some are blank. This is a significant loss since I use Faces a lot to share with family and friends. What else can I do?

Same issue. But my iPhone 4 does it as well. Only thing is with my iPhone it maintains a persistent 3G connection so at least I'm getting my messages as they arrive. But if I relied solely on WiFi and my device was in sleep mode, I wouldn't get any notifications.
On my iPad 2 I've tried forgetting the network, renew lease, rebooted, airplane mode etc. Nothing works.
It's not crippling my device but it's really annoying and it's not the way it should behave.

Similar Messages

Lion upgrade resulted in my iphoto library to be deleted! HELP PLZ!

So I Installed OSX lion 2 days ago. And when i went to go edit pictures in iphoto my ENTIRE library is missing.
I can find some photos in finder but only about 1/5th of the entire library.
When i go to open IPhoto, and i have to choose which library to use, my main 5,000 picture library entitle "iphoto library" isnt the original thumbnail with the colourful pictures, but instead it is a white blank page thumbnail. I click to use the library and there is NOTHING in it.
Im freaking out, and im very confused to why this has happened. If someone can help me recover the library that would be fantastic. Ive tried almost everything i can find online, and nothing has worked
How can an entire library go missing, but my other one with 30 pictures stay intact.
PLEASE HELP!
thank you
Nicole

it does not look like that Thats why im confused! because my other library is still like that but this one looks like this
but my other library looks like the picture you showed. ahhhhh. Why is this happening?
should i try calling apple care tomorrow? to exhaust any hope i have left
bu

When I upgraded my iPhoto thumbnails, my photos disappeared. How can I recover them? I have iPhoto '08.

When I upgraded my iPhoto thumbnails, my photos disappeared. How do I recover them?

There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Cellular data (APN) being emptied even without iOS upgrade

I regularly face an issue where I notice that my 3G doesn't work anymore.
I then go to Settings > General > Cellular Network, and I notice that the "APN" field is empty.
I fill it in, and a few days ago, field gets emptied again without any intervention.
I know this can happen after an iOS upgrade, but I confirm I face the problem also without any software upgrade!
Could you explain what can cause this and how to prevent the field from being reset all the time?
Thanks

This guide should solve your problem.

After upgrade to 9.2 my thumbnails don't show up

After upgrade to 9.2, my thumbnails don't show up. I know the photo is there because I can click on the space where the outline is and get a picture. Anyone??

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take three or four goes.
Regards
TD

Can't sync iPad after iOS upgrade to7.0.2 - repeated authorisation prompt - using admin profile, file SC info does not exist

Hello,
After I upgraded to iOS 7.0.2 I can't sync iPad mini with PC (on Windows XP). I keep getting the folowing message: "The iPad could not be synced because this computer is no longer authorized for purchase items on this iPad". I tried everything:
1) De-authorizing and rebooting (about 100 times);
2) De-installing and reinstalling itunes;
3) Deactivating the firewall;
4) Run Diagnostics (result - all works fine including sync);
5) Tried to look for the "SC info" directory or file everyone is referring to in the Computer (Hidden files) of the iTunes directory - nothing;
6) Ticking and unticking the |Sync over Wi-Fi" option;
7) Changing backup from iCloud to this Computer and back.
I am using the admin account on my PC - doesn't help.
I cannot sync anything at all.
BTW - on the PC and on the iPad - everything that is there plays OK. I can get stuff from iStore both from iPad and from the PC - but I can't sync the two.
It looks like an iOS 7 bug to me - any ideas or advice?
Thanks.
D.

No I have tried multiple connections, at home, at work, and even at my church but to no avail. For example I have recently purchased a CD from Itunes using my computer, but my ipad will only play it from the cloud. I've tried to download straight from my Ipad and that too does not work. When ever I try to plug the Ipad into the computer a window pops up and says that the sync has failed. If I try to drag the file to the Ipad it will say it's loading than just quit before it transfers. hmmm. I hope they get this bug fixed some. would really like to have that CD to isten to on the go. Another issue I am no having is the apps are having trouble updating. I have tried to turn off auto update and do it manually and that too is failing.

IOS upgrade does it again. It trashes my old calendar entries

I have come to rely on the feature in the iOS upgrade that it will trash my old calendar entries. Upgrading to iOS 4 was no exception. It changed start and end times, repeat information, adds entries,combined multiple repeating entries into 1 even though they had different start and end dates and information in the entry and does a whole lot of other nifty stuff. I have reported this with every upgrade and now I realize that Apple does not care what happens to someone's calendar. This IPhone is being synch'd with a Mac so its an apples to apples (sorry for the pun) process.
I have a whole lot of issues with the calendar program on the IPhone. This is the one of the most annoying. The other is if you have parents in the 80's and you set birthdays. They do not show up on your IPhone. They show fine on the Mac but I guess the IPhone does not think your parent's birthday's are important enough to display. I am slowly getting to the point of regretting that I converted to the IPhone. For all of the bells and whistles, when a device cannot do the simplest tasks it becomes an annoyance. Oh yes this is a 3G and not a new phone. I do not intend to spend money until I see that Apple starts to take their customers seriously. They are slowly becoming Microsoft and that is the attitude that I thought I was getting away from.

You have options in the Organizer Tab for Calendar by clicking on Configure. From there, there you can choose to sync ALL calendar entries. This should be a resolution. Additionally, there are options to further control what syncs by clicking on the advanced button.
If you want to control how much calendar data remains on your mobile consider...
I have had problems with Blackberry's handling of appts in the past where - when an appt is deemed to be removed from the mobile device - it removed it also from Outlook! This should NEVER be - but WAS. As a result it is a better 'policy' to simply have your BB sync ALL appts and control how much will remain on your phone by using Outlook's archiving feature. When the calendar items do move to your archive, then you will see appts to be deleted from your phone but they will just be "older" appts according to what you have setup.
And regardless - before you do any new sync or major changes that may react unexpectedly...
Make a backup of your Outlook file just in case!!
Hope this helps.

IPhoto stalls attempting to empty iPhoto trash

iPhoto 9.3.2, OSX 10.7.4 on Mac Pro with 4x2TB internal drives RAID0.
In attempting to empty the iPhoto trash containing 3,493 photos, the "Emptying iPhoto Trash..." progress bar rapidly proceeds to 1% of the end, then stalls. No activity for hours. Forced Quit and repeated attempt with same result. There is plenty of empty space on disks. Total of over 30,000 photos in this iPhoto library. I can't find a work-around to empty the trash.

iPhoto will not empty a trash with that many images in it, and attempting to do so may damage the database.
Experienced users suggest trashing in batches of about 100 or so.
Regards
TD

Wlc 5508 ios upgrade in ha mode

I am having 2 wlc 5508 in HA mode, and want to upgrade ios from 7.5 to 7.6
Current IOS file status in primary and secondary.
Primary WLC IOS : AIR-CT5500-K9-7-5-102-0.aes
Standby WLC IOS : AIR-CT5500-LDPE-K9-7-5-102-0.aes
HA WLC ios upgrade procedure is when we upgrade ios in primary wlc it will push to standby wlc and if earlier ios version match it will accept it.
ISSUE : If you check in wlc status detail I have given upper both has same ios version but IOS file are different and currently in HA mode and working.
Now I am trying to upgrade IOS it is not allow me to upgrade it.
Giving below error :
TFTP receive complete... extracting components.
Checking Version Built.
Image version check passed.
Informing the standby to start the transfer download process
Waiting for the Transfer & Validation result from Standby.
Standby - Standby receive complete... extracting components.
Standby - Checking Version Built.
Standby - Image version check passed.
Standby - Transfer failure : Upgrade from non LDPE to LDPE software is not allowed.
Please download AIR-CT5500-K9-x-x-x-x.aes image instead.
Transfer & Validation on Standby failed.
Transfer download failed both on Active & Standby, Please retry download
(Cisco Controller) >
Please suggest how I can upgrade IOS in HA mode.

Primary WLC IOS : AIR-CT5500-K9-7-5-102-0.aes
Standby WLC IOS : AIR-CT5500-LDPE-K9-7-5-102-0.aes
This won't work and you'll see from the error message. Your standby WLC has a particular firmware loaded with LDPE enabled. So first, you need to answer if you need LDPE or not.
Both firmwares has to match, including LDPE. If you need LDPE, the your primary has to be loaded with LDPE before you can proceed. If you don't need LDPE, then you need to downgrade the secondary to non-LDPE version before you can proceed.

Iphoto thumbnails

iphoto thumbnails all the same...click on thumbnail...see a photo not same image as thumb...and upside down. I want to delete every picture and restart...how?

Better to just fix the thumbnails, no?
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

WS-X6816-GBIC became PwrDown when IOS upgrade to 12.2(18)SXD7

When IOS upgraded from 12.1(13)E8 to 12.2(18)SXD7, one of WS-X6816-GBIC module (in slot5) become PwrDown in show module output but another one (in slot 4) is ok. The only difference I can find is DFC hardware version. Is there any limitation about this ?
IOS 12.2(18)SXD7
------------------ show module ------------------
Mod Ports Card Type Model Serial No.
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE SAL0752RJBZ
4 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAD05050HGC
5 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAL08186B80
6 0 Switching Fabric Module-136 (Active) WS-X6500-SFM2 SAL0708DF8W
8 0 2 port adapter FlexWAN WS-X6182-2PA SAD073900JL
Mod MAC addresses Hw Fw Sw Status
1 0009.1246.eba8 to 0009.1246.eba9 5.0 7.1(1) 12.2(18)SXD7 Ok
4 0030.f271.1972 to 0030.f271.1981 1.7 12.1(11r)E2 12.2(18)SXD7 Ok
5 000f.f780.2420 to 000f.f780.242f 1.7 Unknown Unknown PwrDown
6 0001.0002.0003 to 0001.0002.0003 1.4 6.1(3) 8.3(0.156)RO Ok
8 000d.650a.15c0 to 000d.650a.15ff 1.6 12.2(18)SXD7 12.2(18)SXD7 Ok
Mod Sub-Module Model Serial Hw Status
1 Policy Feature Card 2 WS-F6K-PFC2 SAL0752RKWF 3.4 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL0752RB28 2.6 Ok
4 Distributed Forwarding Card WS-F6K-DFC SAL08249SUD 2.5 Ok
5 Distributed Forwarding Card WS-F6K-DFC SAL081971W0 2.7 PwrDown
Mod Online Diag Status
1 Pass
4 Pass
5 Unknown
6 Pass
8 Pass
The early show module output;
IOS 12.1(13)E8
TANET_PTC_R6K#sh module
Mod Ports Card Type Model Serial No.
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE SAL0752RJBZ
4 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAD05050HGC
5 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAL08186B80
6 0 Switching Fabric Module-136 (Active) WS-X6500-SFM2 SAL0708DF8W
8 0 2 port adapter FlexWAN WS-X6182-2PA SAD073900JL
Mod MAC addresses Hw Fw Sw Status
1 0009.1246.eba8 to 0009.1246.eba9 5.0 6.1(3) 7.5(0.6)HUB1 Ok
4 0030.f271.1972 to 0030.f271.1981 1.7 12.1(11r)E2 12.1(13)E8, Ok
5 000f.f780.2420 to 000f.f780.242f 1.7 12.1(11r)E2 12.1(13)E8, Ok
6 0001.0002.0003 to 0001.0002.0003 1.4 6.1(3) 7.5(0.6)HUB1 Ok
8 000d.650a.15c0 to 000d.650a.15ff 1.6 12.1(13)E8 12.1(13)E8 Other
Mod Sub-Module Model Serial Hw Status
1 Policy Feature Card 2 WS-F6K-PFC2 SAL0752RKWF 3.4 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL0752RB28 2.6 Ok
4 Distributed Forwarding Card WS-F6K-DFC SAL08249SUD 2.5 Ok
5 Distributed Forwarding Card WS-F6K-DFC SAL081971W0 2.7 Ok

Watch the logs as it boots up , my guess there is a problem with the board . We had a brand new card for a 6500 with a problem and the box will power it off if it see's a problem. Ended up RMA'ing the card . Does it show anything when you do a "show diagnostic result all" command ?

The iOS Upgrade TSHOOT Flowchart v1.0! :-)

I am not a jailbreak user, and yet was always bugged by the various unknown error messages when upgrading iOS.
Originally were some point-form notes for my own usages only, but feel that it would be useful for the community after seeing so many people facing various types of error messages on iOS 5 release today.
The paths for iPad is quite solid (cuz I am managing 4 iPads), just need to spend somemore time to QA the iPhone paths tomorrow.
Last but not least, this is inspired by Cisco Press - Troubleshooting IP Routing Protocols
http://www.itcertnotes.com/2011/10/ios-upgrade-tshoot-flowchart.html

Self-repaired! It was appear that the quality of reception of the ATV is problem because it cannot hold a connection long enough to download the software. I took an 11n airport express which extends my airport network and plugged the ATV to in by Ethernet. Result. ATV showed up on iTunes. Upgrade to 2.2 downloaded. And since I only stream, the system seems faster and more solid, so far. Amazing.

Why do I need iOS 5 to buy the iPhoto app???

I have an iPhone 4 and when I try to buy the iPhoto app, it tells me I need iOS 5.1. Why? And how do I upgrade???

You need iOS 5.1 because that is the latest iOS and Apple developed the iPhoto for iOS app to use this most recent version.
If you already have iOS 5.0 or 5.0.1 you can update on your iPhone by going to
Settings > General > Software Update
If you have an earlier version of iOS then you'll have to connect your iPhone to your computer and start iTunes. Select your iPhone in the left column and select General in the right column. Look down the screen to learn about updating the iOS.
The update is free but, especially if you have iOS version 4 something you may also have to update some of your apps. Pages for instance requires a free update to work under iOS 5.1.

How to fix flaws created by latest IOS upgrade?

Since yesterday's IOS upgrade, ipad2 stutters on starting. No more , the smooth if lengthy wait for it to open.
also, some frequently used apps will no loNiger open.
Any solutions?
THank you

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Sources of Interference
Wifi Diagnostic Software (for Mac users)

When i upgraded to the new iPhoto !! how i could restore them ??

All my photos on the old iPhoto disappeared when i upgraded to the new iPhoto !! how i could restore them ?? also i can see the size of the photos on the Hard disk which mean my photos are there but i dont know how to find them . i had to use Command + option when i startup iphoto but nothing happened

Simple solution: restore from the back up you made prior to upgrading.
Other than that:
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

IOS 6 upgrade results in empty iPhoto thumbnails on iPad

Similar Messages

Maybe you are looking for