IOS 6 wifi connectivity problem with iPhone 4s

After recently updating both my iPad 3 and iPhone 4S to iOS 6, I began to have problems with my wifi connection on my iPhone. When trying to connect to my home wifi, the iPhone seems to connect but then brings up the "Log In" screen with an Apple website loaded saying the page cannot be found. However my iPad, again also recently updated to iOS 6, has no problem connecting to wifi. Has anyone else experienced this conflict and is Apple working to correct this? My router is a standard U-Verse "2 wire" device. I have performed all the quick fixes I could think of such as restarting the router, restarting my phone etc. please help!

I have a similar fault with my Lexus ct200h fsport, updated to ios 8.1.1 on my iphone4s 64, and the bluetooth sometimes disconnects during calls then re-connects again (by this time the person on the end has hung up)  .but bluetooth audio works fine. very frustrating!!

Similar Messages

  • Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

    Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
    I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
    All worked OK with ISO 6.

    Hello CraigNicholson
    You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    Regards,
    -Norm G.

  • Any wifi connection problems with new Macbook Pro 13" models?

    I currently use a 15" Macbook Pro (about 3.5 years old) that has intermittent WiFi connection issues (intermittently loses signal). This seems to have been a very common problem with this laptop model. My kids, who use Macbooks, have no connection problems. In any case, I'd love to buy one of the new model 13-inch Macbook Pro's but hesitate because of my many issues with WiFi connectivity on my older Macbook Pro. Just wondering if anyone is experiencing connectivity problems with the new model?

    I've never had Wifi connection problems with a Macbook and now with the 13" MacBook Pro I was flabergasted when I took my MacBook down the street to a coffee house with free WiFi. I went to connect to their WiFi and found my own WiFi connection listed. I thought this odd even though I was on the same block as my apartment, my apartment is six stories up. I connected to the Coffee Shop WiFi but it was really slow so I wondered if I could connect to my own home connection. I switched it over and lo-and behold I did connect! It was a good 300 feet away! I NEVER saw this with previously owned MacBooks including the black MacBook and the MacBook offered just before they moved the MacBook up to the Pro series.
    So I'd say they have improved the WiFi nicely.

  • Wifi connection problem with my iphone 4S

    please help me with my iphone 4S wi fi connection problem:
    before I can easily use the wifi conection with the available wifi networks but 2 days ago suddenly it doesnt connect to the previous wifi i am using, please help me what i will do.
    thanks and best regards

    For Others who may attempt to help here... See this Discussion.
    https://discussions.apple.com/message/19252190#19252190

  • Gmail connection problems with iPhone 5C

    I cannot connect to Gmail with a new iPhone 5c (8GB, iOS 8.1.2, carrier is Verizon).  Have had no problems connecting to Gmail with previous iPhone 4 for last two years; have had this new problem with two different 5c phones in the last week since I upgraded the phone.  Verizon supplied a 2nd 5c phone when they could not resolve the problem with the first one, but the results have been the same.
    The specific message I get when entering my Gmail password is "cannot connect to imap.gmail.com".
    Gmail access is fine when using my Windows computer, and my iPad.  I have signed out of my Gmail account on my computer and signed in with the same password, with no problems.
    Verizon has tried the following troubleshooting, with no success:
    - Gmail account was listed in settings/mail,contacts,calendars/Gmail on phone when I initially restored new phone after activation (email address and password were both listed) but still got "cannot connect ...." message when tried to access email and password was requested.
    - changed IMAP to POP
    - deleted email account on phone, powered off phone, then added account back
    - initial problem was with as-supplied software 8.1.1; tried after upgrade to 8.1.2
    Gmail can be accessed using the Gmail app for iPhone, but cannot be accessed using the email icon on the phone; to activate the Gmail app, I have entered my email and password, and it was accpted without a problem. 
    Calendar function has mixed results when connecting to my Gmail-based calendar; it did not work for a while but now has worked for a while.

    With the Gmail app or with Gmail open in Safari or using the native iPhone mail app?

  • Why won't Apple fix the wifi connectivity problem with the iMac and new OS instead of just havin us go through hours of useless mock fixes!

    I have spent hours with apple care about this problem with wifi connectivity.  According to all the posts I'm not alone.  I love my new IMAC
    but i'll be glad to go back to my PC just so I can get my email without all the headaches.  It seems that Apple has lost interest in
    the IMAC and all of the problems associated with the new OS. 

    Keep in mind that ASC is where people go to get help, so yes, you are seeing reports of people who are having WiFi connection issues. But while it might seem like there are lots of people having trouble, given the sheer number of iMacs in use, it is a very small number. Also keep in mind that WiFi isn't totally under Apple's control. There are dozens of WiFi routers. Even worse, the manufacturers of WiFi routers often release firmware upgrades to fix flaws without ever informing the consumer. And just to add to the confusion, while WiFi 801.2 n routers have been sold for several years, for most of that time there was no agreed upon standard!
    So if you'd like help, first, what router do you have and have you checked the vendor site to see that it has the latest firmware?

  • WiFi connection problem with WRT120N

    Hello,
    I'm trying to configure the WiFi on a WRT120N (firmware 1.0.05), but I encountered several problems.
    The Internet routing is OK => no problem to have a RJ45 connection.
    But when I configured the WiFi, the problems begun...
    1) With a laptop Dell XP SP3 (about 6 years old, and working fine with other WiFi networks b/g WPA/WPA2), I can see the SSID, but it is not possible to connect (without security, or with WEP, WPA or WPA2).
    2) With 2 different desktops (XP SP3 and Vista SP1) and an USB adapter Linksys Wireless-G, I cannot see the SSID (but I can see other SSID in the neighbourhood).
    3) With an Alienware, no problem, I can immediately connect and surf (with or without encryption).
    Could you please help me to solve this problem ?
    Thanks in advance.

    Connect the computer to the router with the Ethernet cable.
    Open the setup page of the router. Create a new wireless network.
    Click on the wireless tab and set the configuration view to manual.
    Keep the network mode on Mixed, change the SSID, standard channel to 11. Save the settings.
    Click on wireless security sub tab. Change the security mode to WPA personal and enter the password for the wireless network. Save the settings.
    Click on Wireless MAC filter sub tab and make sure that it is disabled.
    Click on Advanced wireless settings sub tab. Change the beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.
    Now try to connect to the wireless network. See if that works.
    if you are not able to see the SSID then try changing the wireless channel on the router.
    If that doesn't work then re-flash the firmware on your router. Download the latest firmware from Linksys website and save it on your computer. open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and re-flash it on your router.
    After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 10 seconds. Power cycle the router and reconfigure it.

  • Connecting problems with iphone after a closed connection with a Mac

    Hi!
    I have set up 4 ssl vpn  with different shared keys. The connection with each Mac via Securitas is working fine. Additinaly I have set up a ssl vpn for an iPhone iOS4. If the SA 540 is rebooted I can connect to the SA with the iphone without any problems, one tine, two times...
    But after I had closed a vpn-Mac-connection it is not possible to connect with the iphone again: the shared key is not correct. In this case the iphone tried to connect with its own shared key - a different one to the Mac connection.
    So I set all shared keys to the same. After reboot of the SA the connection of the iphone works well. After a running or closed Mac connection the iphone could not connect to the SA: Error: communication with VPN-Server failed.
    So it is not possible to connect with an iphone and an ssl client at the same time. The iphone can only make a connection after a long time again.
    Has anybody a solution for that issue?
    The latest firmware is installed.
    Thanks a lot!
    Jens

    This is a normal behavior when NAT-T is not enabled. Without NAT-T, the firewall cannot PAT ESP packets because there is no port (UDP or TCP) in the packet. Hence, every packet leaving the WAN interface has the same source address and no source port by which the return traffic can be identified and translated back to the inside address. With NAT-T enabled, the packet is encapsulated in UDP before being translated by NAT; therefore, each IPSec host on the inside of the firewall gets a unique PAT'ed source UDP port after the PAT is peformed and before the packet is sent out of the WAN interface; hence, when the return traffic arrives in the WAN interface, the firewall knows which PAT rule to use to send the return traffic back to the host on the inside of the firewall that originated the IPSec VPN connection.
    Therefore, with NAT-T disabled, only one host behind a PAT firewall/router can establish an IPSec VPN tunnel to a host on the Internet at one time.
    Besides the requirement of having NAT-T enabled for multiple hosts to be able to establish an IPSec VPN tunnel from behind a PAT firewall/router, you should also make sure that there's a firewall rule applied inbound on the WAN interface that allows UDP 4500; otherwise, NAT-T will not work. NAT-T uses UDP 4500 for IKE negotiations. Without NAT-T, IKE uses UDP 500.

  • Wifi connection problem with two iphone 4s

    Just installed a new Linksys E-1200 wireless-N300 router.  We can not connect two iphone 4s at the same time.
    If one gets an IP address, the other can not.  If we switch off the wifi on the one connected then we can get the
    second iphone 4 connected but not both at the same time.  We have DSL with ATT.  Any suggestions?

    For Others who may attempt to help here... See this Discussion.
    https://discussions.apple.com/message/19252190#19252190

  • Wifi connection problems for iphone 4S. Help please!

    I just got the iphone 4S the other day and was able to connect to my wifi and now 3 days later it won't let me connect to it? It asks me to put in the password and I KNOW I'm putting in the correct password. Any idea what could be causing me to not be connected now. It is frustrating because it won't let me get on itunes, download apps or do facetime which is what I really wanted to try to do.

        Hi jenjenjab19
    The problems you have described are very frustrating. I would be glad to look into this with you.
    Have you tried resetting your home Wifi? Please try a soft reset on the iPhone and retest. Here's how to reset the device: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=47670
    Please let me know if this helps.
    Thank you
    JoeL_VZW
    Please follow us on twitter @vzwsupport

  • IOS 8 battery problem with iphone 4s

    I installed IOS 8 over the weekend on my iphone 4S.  My phone is completely dead because of the battery drain to fast.   for example it was 100% fully charged, left alone for 20 min later (without using it), the power went down to 72% .  or went to bed power at 85%, the phone went dead next morning.  another occasion: left the house at 65% power,  it went dead after 2 hrs WITHOUT A SINGLE USE.  I went to the Setting so many times to see anything that unusual, I turned of: Background App Refresh,  Turned off Location Services (each App too), etc..  I done everything I can, still the battery draining too fast.   Apple what have you done, this is causing so much grief !!!!  I need help !!!!    another problem,  when I am in an App ( i.e.  CNN)  to see the news with video.   I see the video, but no VOLUME.  looks like the volume button is disabled nothing there.     

    This sounds as if an app keeps running in the background although you don't use it or allowed it to use it in the background.
    Did you already check Battery usage to see which app you didn't use much (or not at all) causes a major use in battery. See also this article and this one on iMore.
    I've seen others who had background process off for e.g. Google Hangout and Skype but still had major battery usage since iOS8.
    Please look also into the apps who are allowed to use 'Background refresh' and 'Push Notifications'.
    I've had similar issues with another Dutch app called Scoupy after 6>iOS7 upgrade. I deleted the app and it resolved the battery drain. The app released an update (months later) which resolved the drain finally. It was however very hard in the previous versions to find out the app which caused the drain. In iOS8 that is much easier now.

  • 3G connection problems with iPhone 5 (connection disappears when I call)

    I have an iPhone 5, the 3G signal works perfectly until I receive a call and I have to speak with the phone close to my ear. When I start speaking the 3G signal disappears and takes a while to get back on. Is there a way to solve this problem?

    It's helpful to let us know what you've already tried. Anything else?

  • Connecting Problems with iPhone and iTunes. Help please?

    When I connect my iPhone 4 to my laptop (Toshiba), I have a huge issue with connecting and syncing my phone on iTunes. During the time it is plugged and attached to my laptop, I can charge it and sync photos that are on my device to the compter, but I can not get it to sync with iTunes. Also, I do not know what my iTunes is fuctioning at (6.1- 7.1- 8.etc), but I did updated it about a month ago. Does anyone have any information and /or/ helpful advice on this topic?
    Thank you!

    Hi CookiCat,
    Follow the troubleshooting steps in the link below:
    http://support.apple.com/kb/TS1538
    Cheers,
    GB

  • Connection problem with iPhone & MacBook Air

    Why can't I get them to pair?
    I click the bluetooth icon in the menu bar, click My iphone, connect to network- I get an alert which says 'make sure network is enabled'.
    I believe it is.   How do I know this, exactly?
    Then I go to bluetooth preferences, I see my iphone & click it- it doesn't connect.
    My phone asks me to see if the puter is on & in range- it is.
    I'm confused. Anyone want to walk me through this?

    Hi bwesposito!
    I have two articles here for you that will help you troubleshoot this Bluetooth connection issue:
    Bluetooth Quick Assist
    http://support.apple.com/kb/ht1153
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • Wifi connection problem with my nokia X7

    i have nokia X7 for almost 3 weeks at first i can connect to wifi and can brows to internet but now after a week i can still connect to wifi but when im trying to brows or open internet i cant connect?
    and when i check status connect it says (inactive) i do restore the factory setting but still the same problem can someone from nokia can help me to solve this problem?

    hi ajaydavidson,
    thank you for ur Assistance, i follow ur instructions
    settings>connectivity>settings>destinations in that you will find the Wifi access point in might be in the internet option tap the Wifi access point then options>advanced settings>ipv4 settings in that make sure that the number is present.
    in IPv4
    Phone IP address
        Automatic
    DNS address
        Automatic
    when i open/tap IPv4 i only see 0.0.0.0 and i dont know what to do next, help pls?
    looking forward to hear from you soon
    thank you
    leajas

Maybe you are looking for