Ios 7.0.2 problem with many iphones
I work in Mobile Work Shop and i received soo many problems about iPhone 4s and iPhone 5 after the customers do update via itunes, the problems are :
1- Durring call : can't speak and hear the caller
2- Battery drain and won't charge successfully
3- Wi-Fi won't turn ON ,always OFF
4- Bluetooth is disable
those customers has those problems because the upgrade and update from iOS 6 to iOS 7.0, 7.0.1 or 7.0.2 .
would you please give me the solutions or at least upload a new version without these problems.
Regards.
this is a user helping user forum not a channel to apple
if you wish apples ear you should use the feedback channel
http://www.apple.com/feedback/
Similar Messages
-
I have problem with my iPhone 4s, the problem is i can't turn on wifi, though i have wifi address in my iPhone setting when i go to the general then about option, i tryed many options like turning of iPhone in airplan mode, reset options, but still the same, its gray button of wifi, please help me.
Hello Pllumb,
It sounds like you are unable to turn on Wi-Fi because the option is grayed out in Settings. Use these steps from the following article named:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Problems with Syncing iPhone 3G (4.2.1. iOS). What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up. I noticed that my name has been replaced to "untitled playlist". Whats wrong
Welcome to Apple Discussions!
Maybe a long shot, but WD is not known for the quality of some of their enclosures, although I do like the drives themselves. It may be worth mounting this drive in a different enclosure, something like one of OWC's FireWire enclosures with the highly reliable Oxford chip sets. I wouldn't be inclined to trust a WD enclosure, especially if it already seemed to be acting in a flakey manner.
Here's an example of what I mean:
http://eshop.macsales.com/item/Other%20World%20Computing/MEP924FW8E2O/
I have 3 of these and I really like them.
From what I understand, if the drive spins up, it is often possible to recover data from it. To be absolutely certain to destroy the data, you just about have to take a hammer to the disk. Hopefully, there will be a way to get your data back.
Good luck! -
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1
I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated. -
Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or accessory is not certified and may not work reliably with this phone".
How is this possible? I then phoned the shop and told them my problem. When I gave them the details I also found out that the imei No. in the iPhone is the same as on the original box. But the the Serial numbers are different. I already try the support centre but I’m over the 90 days.And there is no Apple Store in Namibia. I hope someone can help me here. Thanks, RalfarYou are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3
Try a new SIM from your carrier. If that doesn't work, make a Genius Bar appointment and get your phone evaluated.
-
I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found
You have to go to autherized iPhone agent.
-
Iphone 4s ios 6.1.2 problems with 3G
iphone 4s ios 6.1.2 problems with 3G
3G network is going to shutdown after voice call.Bad news guys.
My stuff doesn't work anymore.
No WIFI and i don't for Bluetooth.
I've reinstaledl the 6.1.2 using iTunes with the 4S as new but that was not a good idea ... Maps of my coPilot can't be downloaded because no wifi.
Apple take a quick action to solve this issue ... iPhone is one of my professional tools ... If no solution by the end of next week ... Bye bye iOS and welcome Android ...
PS: no problem with 6.1.2 on my iPad 2 WIFI. -
Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank youDid you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM -
HT4623 I have a big problem with my IPhone 4 since I've updated to IOS 6.0.1.
I've got a problem with my IPhone 4 since I've updated to IOS 6.0.1. After the call I'd like to end the call but the picture on the screen becomes magnified
so that you cannot see anything and the screen is not reacting. I need to restart the phone. But 7 or 8 times daily to restart the phone is not really convenient.
Has got anybody the same problem? How can I go back to IOS 5 ? Before the update I was a happy user of IPhone.
Thanks for help.Downgrading your ios is unsupported by apple. Go to settings, general, accesibility, zoom off..?
-
Hi I have a problem with my iPhone 4S I have no sound from my speaker , keyboard, notifications. or volume controls, I have reset my iphone many times and still the same, any advise will be greatful
ThanksI don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck! -
Can anyone, help me please?
I have a problem with my iphone 4 Facetime, that since the new ios 7 system has been installed, I cannot use the FACETime? I don't know where to turn? I have contacted a retailer here in Isreal, and I've contacted the Cell come company and I've contacted the repair shop... each one pushes me off on someone else.
I cannot make any FACETIME calls.... anywhere................ helpHmm, I see from the Apple Support webpage it seems you cannot call them directly from Israel, that's not good.
Okay, so FaceTime stopped working once you upgraded to iOS 7 is that the situation? It doesn't work over either cellular or WiFi networks? I assume you have checked the Settings>FaceTime>FaceTime switch is on and that you have your correct Apple ID in there as well?
What happens when you launch the FaceTime app and attempt to make a FaceTime call, what message(s) do you get? -
Hi there! I have a problem with my iphone 4! i can't share my contacts because its not showing the share contact bar at all-it only shows "send message"!! i have the ios 6.1.3
Try restarting your phone while you hold down the power AND the sleep button at the same time.
This defenitly is a software bug and normally there should be this button. -
I'm stuck on the activation screen. I can only select language and country, then it tells me to connect to itunes. In itunes I get the "there is a problem with your iPhone" message. Also, my iPhone keep "searching" for my carrier (Telenor in Norway), but never finds it.
ThanksNo, it wasn't jailbroken on iOS 5.1.1.
Maybe you are looking for
-
Dynadock w. DVI, phase 2
Hello, looking through the dynadock manual (available online for download on the Toshiba homepage) I could not quite figure out whether Dynadock will be able to transmit the resolution of 1400 x 1050 (SXGA+) to an external monitor. Our Notebook would
-
Basic Questions about JSF, Login and Session
Hi, I try to implement a login/logout function on my jsf-website. I create one <form> with Login and Pass to enter. My AuthenticBean(sessionbean) checks login and pass. If Login is "ok" the login and pass will set in the authenticBean (min. value of
-
Hi all, When I am displaying the data in the ALV it is populating the whole table. I have few fields which i have selected in the context node. but it is displaying all the fields, Please let me know how I can write the code when i want to display on
-
Opening files automaticaly at launch
Hey I've recently upgraded from Indesign CS6 to CC, and there is one option I can't seem to find in the new version... On CS6, when I would launch the application, Indesign would automaticaly re-open the files that were open when I had quit Indesign.
-
Need help with outer join filter.
Need a little help filtering a resultset and I cant seem to find a proper way to do this. /*table*/ create table invoice( farinvc_invh_code varchar2(100), farinvc_item varchar2(100), farinvc