IOS 7.0.4 Messages not working, unable to disable iMessage

After upgrading to IOS 7.0.4, I am unable to send Messages from my iPad2. I have the same issue on my iPhone 5s but I was able to disable iMessages in Settings and it works in SMS mode. I tried to disable iMessage in Settings on my iPad 2 but each time I do it then prompts me for my Apple ID password everytime I launch Messages. When I enter my password it accepts it but it enables iMessage, which will not send a text, I get the "not delivered". Since I'm unable to disable iMessage as described above, I'm completely unable to send any text messages from my iPad. Luckily I do not get the same results on my 5s, it allows me to disable iMessage and does NOT prompt me for my Apple ID/password and therefore does NOT reenable iMessage.
I've tried closing Messages and power cycling my iPad2 but the same issue occurs.
Both devices are runing IOS 7.0.4.

Thanks for the replies from all. The first issue was that I don't have a cellular iPad (I forget) so of course I could not turn off iMessage as I did on my 5s.
The real issue was that when my Wife's 5s was upgraded from IOS 7.0.3 iMessage was disabled. This did not happen on my 5s or my Daughter's 5s so I didn't expect it.
So, check to make sure that iMessage is enabled after upgrading from 7.0.3 to 7.0.4.
Thanks again!

Similar Messages

  • IOS Group Messaging not working when Android phones are involved

    Group Messaging not working for me when there are both Iphones and Androids involved. iPhones still using iOS 7 don't seem to be having problems leading me to believe this is an iOS 8 problem. Is there a workaround for this yet, or is this a legitimate bug fix that Apple will have to address?

    Hey geoff_zen,
    Thanks for the question. After reviewing your post, it sounds like you arr having trouble with group messages. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting Messages
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I have a 3gen iPod message not working any solutions

    I have a 3 gen iPod messages not working any solution

    Start here:
    iOS: Not responding or does not turn on
    You are not really giving ups much information to provide more detailed advice.

  • Since I have updated IOS 6 my mail does not work, it keeps telling me my user name and password is incorrect.

    Since I have updated my iPad to iOS 6 my mail will not work, so I deleted my account and added a
    New, now it says my username and password is incorrect.  But my username and password are correct.
    Does anybody have a solution?

    May be something here.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • [svn:bz-trunk] 16395: Bug: #2621264 [Regression] Small messages not working with NIO-HTTP endpoints in LCSD/trunk.

    Revision: 16395
    Revision: 16395
    Author:   [email protected]
    Date:     2010-06-02 05:00:56 -0700 (Wed, 02 Jun 2010)
    Log Message:
    Bug: #2621264 Small messages not working with NIO-HTTP endpoints in LCSD/trunk.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: This is the BlazeDS side of the fix. This wasn't a regression, it probably never worked correctly. So, in the scenario where there's a Producer and a Consumer, and Producer sends a message for the Consumer, there are 2 messages from the server. The ACK message for Producer's send, and the actual message Consumer receives. I found that the ACK message was in small form, but the actual message was not in streaming messages. This was because we never really tried to convert streamed messages into small messages before.
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java
        blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingAMFEndpoint.java
        blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingHTTPEndpoint.java

  • HT5012 Update my iPad to ios7.1 and messaging not working  .......suggestions?

    Updated my iPad Air to ios7.1. Messaging not working. Suggestions????

    What happens when you try? Getting an error message?
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

    My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Anyone's I Message not working this morning?

    Is your I Message not working this morning?

    I've been using mine all morning.
    https://www.apple.com/support/systemstatus/

  • My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!

    My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!
    Can anyone help me?

    Hi there Cinthia88,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W.

  • Iphone 4s Running Ios(7.1) Camera Focus Not Working Like Text On book It Showed Blurey Text & My Friend Also Same Modle His Camera Focus Perfectly..Is Is Possible To Fix It...Thnx Every 1

    Iphone 4s Running Ios(7.1) Camera Focus Not Working Like Text On book It Showed Blurey Text & My Friend Also Same Modle His Camera Focus Perfectly..Is Is Possible To Fix It...Thnx Every 1

    Hello SajidChaudhary,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Have a nice day,
    Mario

  • I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

    I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

    No Japanese carrier provides unlocking services. Therefore, your phone must have been hacked to unlock it. That hack was removed when you updated the software. You need to be a legitimately unlocked phone.
    Best of luck.

  • E7 Nokia Messaging not working after anna update

    hi
    nokia messaging not working after anna update. when i
    -choose provider (hotmail/gmail/yahoo...etc)
    -enter username & password
    -click OK to T&C
    -get error message: "cannot enable this service on the device"
    any ideas?

    I'm having a similar issue. It appears to only impact Hotmail accounts. For me though, this happened without updating the OS. The email client is simply failing to connect to the Hotmail interface. Only two possibilities, either Microsoft changed something on the email gateway or Nokia changed something on their end. Either way, it's not working and has been out of commission for the past week. If this is how corporate friends get along, I'd hate to see what happens in a adversarial relationship.

  • I upgraded my new ipad with iOS 6 but siri is not working?

    I upgraded my new ipad with iOS 6 but siri is not working?

    Enable Siri
    http://www.todaysiphone.com/2012/09/ios-6-overview-siri-for-ipad-3/

  • HT4623 TRying to update iphone 4@ to ios 7. Get message in itunes "unable to load data class information from Sync services. Reconnect or try again later." That has not worked.

    Corporate issued iphone 4S. Trying to update to ios 7.  I tunes not recongnising the phone, and I get this message:
    "itunes unable to load data class information from Sync Services. Reconnect ot try again later."
    I have disconnected from itunes several times. The phone is dead, as if it was brand new.
    I get "slide to setup" and then connect to wifi, which works, but nothing after that, just above message.

    Hello there, scott_arrow.
    The following Knowledge Base article offers up some great information for your particular message:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I message not working on ios 7

    I have upgarded to ios 7 and my i message isnt working, when i go to turn it on it asks me to log in to apple acc, which i do and it wont accept my details, i have tried logging into my apple acc via app store and it works fine, i have also logged out of my acc and logged back in fine so i know that the details are correct.
    anyone know what else i can try please. 
    Thanks

    I have just read this a second ago so I will advice you the same, you could maybe think about going to get an appointment at your closest Apple store because I am not sure many people know how to fix this, they will probobly swap your iphone in for a new Iphone 5

Maybe you are looking for

  • I can not uninstall Office 2013 from command line

    Hi, I have been stuck for a while trying to uninstall Office 2013 via command line. Installation file was downloaded from Volume Licensing Service Center, Uninstall.xml file for silent uninstallation looks like this: <Configuration Product="ProPlus">

  • Premiere Pro keeps shutting down and I can't get rid of video clip from timeline

    Lately, Premiere Pro keeps bringing up a message when I'm working on my project that says "serious error, Adobe Premier Pro needs to shut down". It's happened four times now. I've tried restarting the computer, uninstalling some programs I wasn't usi

  • The app store showed me that I had 3 apps to update, Drudge Report, iBooks

    The app store app, showed that I had 3 apps to update, one of them being iBooks.  Anyway I keep getting a message that they cannot be updated at this time however I have been able to update other apps. I can't find any troubleshooting advise.  I have

  • How do I save changes made to a sub vi automatically

    Hello Fellow Engineers! I have a doubt and welcome useful suggestions from all of you. I have the following problem: I am programming a vi that asks a user for his/her username and password. The user has an option of changing the password . When he/s

  • Hide Accounting Tab in CProjects

    Hi All, I want to hide the "Accounting" Tab in CProjects, depending on user authorizations. I tried to realize it with BADI "DPR_DETAIL_TAB_CTRL". Unfortunately in this BADI I can only hide tabs on detail level e.g. tabs for tasks, phase etc. But how