IOS 7.0.6 Update Failure!?!?!?!?!?

OK so, my iphone stated that it had a software update iOS 7.0.6. I went to the settings and clicked it. Its started updating fine. Then suddenly it stopped! I restarted it, put it on charge, and went to bed. 12 hours later, it's still stuck! What do I do???

i have same issue on iphone4.  the home/power doesnt work - phone hangs in reboot with the bar " 1/3 of the way across. i think the update has bricked the phone....any ideas?

Similar Messages

  • IOS 7.1.2 update failure on - No Sim

    After I updated my iOS my iphone 4s can't read my SIM.

    I'm hoping they figure out a fix for this soon, it's too much to just be a coincidence in my opinion. I hadnt bothered with the update until last week I figured why not update, it'll get rid of the irritating notification badge I had for so long. Sure enough that evening I had my first of probably 2-3 dozen SIM card failures in a week or so. Doing a hard restart will usually temporarily fix the issue but I'm sure I'm not the only person who realizes that this kind of bug could cause serious risks. For anyone trusting a reliable network connection in a life or death situation this is actually a very big problem. I never know when or where my phone will fail on me next. It's about a year and a half old and I haven't had a single issue with network until hours after this latest update. I will be doing my research from now on before updating. This post is more so for someone within Apple, and to support the legitimacy of the others, you should really take these network failure concerns seriously.

  • Iphone iOS 7.1.2 update failure

    The phone dowloaded the update & started the installation.
    The phone restarted & then restarted the installation process a second time & has now halted.
    Is my phone now broken?
    Can I now demand a new phone from Apple, because they supply useless products made in China?
    Can I now get my $1200 back from Apple, because their update has now broken my phone?

    Well, you are really getting rather hysterical about nothing. Reset your device (nothing will be lost): Hold down the Home and Power buttons and continue to hold them down until the Apple appears. Once the reset is complete, the Home screen will redisplay. Go to Settings>About and check to see if your device is running the updated iOS. If it is not, try the update again.
    People all over the world are slamming the servers right now. Nothing bad has happened....
    Cheers,
    GB

  • IOS 5 update failure on 3 Devices

    For the past year or more, I haven't been able to install updates from iTunes to my iPad, and IPod Touch 3G and 4G.  I keep getting the network connection time-out issue.  However, I've been able to successfully update all 3 devices by directly downloading the updates to my computer, and installing from there.
    That worked fine, until now.  When iOS5 came out, I directly downloaded the update files like before, and tried to update manually.  The updates all failed with the same error message - "The iPod/Pad could not be updated.  An unknown error occured (3002)."  I'm aware of the server overload issue in the immediate wake of the iOS5 release, and took the advice to wait awhile to retry the update process.  But it's now almost a week later, and after literally dozens of attempts to install this latest iOS release, they keep failing with the same error message.  For what it's worth, I have the latest iTunes release (installed and re-installed), and have IOS 4.3.5 on the iPad and iPods.  iTunes and Windows Vista diagnostics says everything is fine with my network connections and settings. I have tried disabling firewalls and antivirus security during the updates, and it makes no difference.
    Does Apple have any real solutions to this mess (lots of other users are still having similar problems I see), or are some users devices permanently relegated to running older operating systems?

    Sigh.  Yes, thank you, I have the correct updates for each device, downloaded directly from Apple.  I know how to install them directly from my computer, that's what I've had to do for the past year or so.  As I said, it always worked, until now.  My question is, why doesn't it work anymore, and what is Apple doing to address this, and the multiple other update failure issues that users are having with iOS5?

  • My daughter has not used her ipod touch for 16 months and has forgotten her passcode.  restore factory settings keeps failing due to a software update failure!

    my daughter has not used her ipod touch for 16 months and has forgotten her passcode.  restore factory settings keeps failing due to a software update failure!
    how can i get this ipod reset.  She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my account

    That has nothing to do with an update server. Do the following:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
      If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes

  • "Software Update Failure - an error occurred installing i0S6."

    I tried to update my iphone 4 through my settings and got the error "Software Update Failure - an error occurred installing i0S6." This is not the first time that happens. I got the same error in the last 3 ios updates. The only way that I found to solve was to update by itunes, but as we have the option to update through iphone, I want to do that.
    Any suggestions on how to solve this problem will be most appreciated.

    In the last 3 ios updates I had to use itunes because through the settings I always get the same error message. The point is that I don't want to use the itunes. I want apple to fix the problem (as I can see I'm not the only one having problem). I have 2 friends that did the update in the same time that I was trying to do, and for both them it worked.

  • IPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers?

    iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open.  So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.

    Maybe. See:
    Reverting to previous version of Numbers

  • After ios 8 update has anyones ipad started randomly selecting everything? Even after ios 8.0.1 update it has still continued to do the same thing.

    After ios 8 update has anyones ipad started randomly selecting everything? Even after ios 8.0.1 update it has still continued to do the same thing making it immpossible to use ipad anymore. Has anyone had the same problem and/or knows how to fix this?

    Try a Reboot pess & hold power button & menu button hold both down until you see Apple Logo you will not lose any data This may help but the ipad 2 is a bit under powered for iOS 8 If you can a very good buy now is the iPad Air 32G Since they brought the new one out the price for this model Has come down by £120.00 That's the one I am using and it works great on iOS 8.1 Bsydd uk

  • Does anyone know how to solve: "Firmware update failure. Disk write error"?

    Hi all,
    Here is the list of all what went wrong and where I am now:
    1. My Ipod worked well
    2. I wanted to update it, you know, the normal thing with Itunes
    3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
    4. I took my external drive (where my music is) at work and tried again: same result.
    5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
    6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
    7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
    8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
    9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
    I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
    Thank a lot for your answer

    Hi Cyrille,
    Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • I am trying to get ios 4.3 softeware update for iPad1. When I plug in my iPad to my PC, mu PC tinks that it is a digital Still Camera and will not go any further.

    I am trying to get ios 4.3 software update for my iPad 1. Have downlosded Itunes and apple softwareupdates to my PC, but when I plug in my iPad the computer thinks it is a digital still camera.  how do I get my PC to reconize that it is an iPad

    Must point out that this is the first time I have ever tryed to update my iPad, other than when I got it started at the store where I abought it. 
    This is what is happening to me.  the PC is on and I have3 the Itunes on the screen but as soon as I plug in my iPad my PC seems to think that it is a digital still camera and emediatly starts suting down as it seems to think the iPad(digital camera) is going to harm my PC.  PC will not go anyfurther than a warning screen and I have to then shut it down  unplug the iPad and start again.  HELP please

  • RMMR1MRS-When run in background cause update failure errors looking

    hi,
          RMMR1MRS report when run in background cause update failure errors .
    There are few  below reason for the error log.
    1.  for the PO invoice already generated -  (its right if already invoice generated. should not happen again)
    2.  In  MIGO,  entire  quantity has been reversed  and also invoice generated with zero value - ( its right , should not happen invoice again )
    3. Particular PO line item deleted -  (its right if the PO line item deleted. ERS settlement not require)
    For the all above reason, the update error occurs.  But the mean time  the program  "RMMR1MRS"  should not through the update error log. 
    Note: The job was not terminated due to this update error and also no harm because of the error log
    can you please help on this update failure why it occurs.

    Have you found a solution already? If so, please, share it with the community and close this thread.

  • Headphone remote not working after iOS 8.1.2 update on iPhone 5

    Following iOS 8.1.2 update my iPhone 5 no longer responds to the inline remote on my headphones.  Remote still works fine with my laptop so the problem is specific to the updated iPhone.  I am using SkullCandy Earbuds.  Any ideas?  Thanks!

    Hello Nathan,
    After reviewing your post, I have located an article that can help with your iPhone's camera. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping  (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Internet not connecting after ios 7.0.2 update on iphone 5

    Internet not connecting after ios 7.0.2 update on iphone 5

    Hi there PompasJr,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Camera isn't functioning
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    -Griff W.

  • IPhone5 rear-facing camera and flashlight not working after iOs 7.0.3 update

    This is my first time posting here so do forgive me if I leave anything out.
    Problem 1
    I updated my iPhone 5 to iOs 7.0.3 (on 10/22 when it released). Since then, my rear-facing camera has stopped working. When I open up the camera, it's just a black screen and I cannot take a picture or video, but the other elements on the screen are still functional: changing flash from auto/on/off, turning HDR on/off, switching from video/photo/square/pano, but still the screen remains black. When I switch to the front-facing camera though, it works fine. I can take pictures and video through that view.
    Problem 2
    The second problem that's happened as well is the flashlight in the control center is greyed out, can't click it at all.
    Attempt to Fix
    I brought my iPhone 5 to a Genius Bar. Guy took it to the back to open it up and check if there were any physical problems with the phone and camera. He came back, found nothing. Unfortunately my phone was no longer under the one-year warranty, so in order to fully replace the phone with a new or refurbished one, I would've had to dish out $200 something and I wasn't trying to do that just yet. So we decided to just wipe it clean and restore. After we did that, everything was working, the rear-facing camera, the flashlight, things were perfect. I left the Apple store, got on the train to head home. I opened up the camera to take a picture and long behold, it stopped working again. I got home and did the exact same thing the guy did, wiped my phone and restored. Everything was working again. I held my breath though... 1/2 hour later, same problems with the rear-facing camera and flashlight came back.
    Just as a note, not sure if it helps, when I use third-party camera apps/photo editors, when I try to use the camera within those apps, it freezes and closes.
    I don't know what else to do. It seems the only fix is restoring my phone and having the camera and flashlight work for a few minutes only to go back to the same problems. The Genius Bar didn't help. I'm not trying to give up $200 something when this is something that happened clearly because of the iOs 7.0.3 update. It was working perfectly fine before that.
    Any help is appreciated! Thanks!

    WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

  • Updating my iPad to iOS 6.1.2 now that iOS 6.1.3 update is out

    How can I update my iPad to iOS 6.1.2 now that iOS 6.1.3 update is out

    You can't. THe time to update to 6.1.2 was before 6.1.3 came out. All you can access is the latest update.

Maybe you are looking for