IOS 7.04 install causing sync error message

I phone 5 won't sync since installing ios7.04 any suggestions

Thanks Rahul,
Yes I tried 7.03 and 7.02, both of which resulted int he error 3194. I even tired to trick itunes by putting the 7.02 ISPW into the roaming directory, but renaming it as the 7.04 ISPW, but Itunes recognises that the file is not the most up to date and moves to update the IOS.
I have the latest version of itunes, so Im not getting error 23 which would suggest that some software was out of date, just the error (1) for which the advice is try to restore twice more, and if that fails, take the device for service.
I even took the phone to the local Apple fanchise and they are as stuck as I am, same error message and an age to attempt a restore. They did the last restore for me for IOS 7.03 in store, and although it took a very long time to complete ( about an hour and a half) it did eventually restore... but still with some issues. Like if the phone powered down or was switched off, then it would fail to reboot properly afterwards.
I'm due to take the phone to a bigger Apple store with a genius bar, but the appoinment is some time away still. Of course that will just br having the phone assessed to find out what is wrong with it. But in the meantime, I will keep trying to see if there is anything that I can do myself... though I'm pretty much out of idea's and think I may have to admit defeat tbh.
Thanks for your input though Rahul, I do appreciate it.

Similar Messages

TS1702 i have the original ipad it is running iOS 5.1.1 - i tried to install Procreate and error message said this application needed iOS 6 - went back to itunes and downloaded iOs 6 and installed it on computer then resynced the ipad - but doesent update

i have the original ipad it is running iOS 5.1.1 - i tried to install Procreate and error message said this application needed iOS 6 - went back to itunes and downloaded iOs 6 and installed it on computer then resynced the ipad - but doesent update to 6 - anyone have a suggestion???

I contacted apple and they checked and yes the originsl ipad cant support ios 6 - so cant use procreate have also checked the procreate website and it appears they advised itunes of this - ideally there should end up being two versions of procreate - one for ios 5 and one for ios 6 -
dont want to sell the current ipad and get another - at this stage - for the amount of usage it gets not worth the expense
thanks

IPad 1 syncing error message

For some reason, my iPad 1 stopped syncing Instapaper, so I uninstalled the app and went to reinstall and found that it still wouldn't work. So I did a clean install from a back up and now after every sync I get an error message saying (user name)> (user name) file can't be found and can't be synced, but after unplugging the iPad is normal. What is causing this error message and how can I get rid of the message?

OK, here's how I fixed my sync problem. First, when starting up iPhoto, press and hold down the cmd & alt buttons on your keyboard and this will bring up a dialog box, select all check boxes and hit rebuild. This will take some time so have a coffee or go and do something else, then when you come back, try syncing again in iTunes and the error message should be gone!

Cannot download apps to iPad since iOS 5.1 update. Get error message "An unexpected error has occurred"

cannot download apps to iPad since iOS 5.1 update. Get error message "An unexpected error has occurred"

Hi mike,
Seems like a frustrating problem! Try restarting your device, and trying again. If that doesn't work, in settings, under store, tap your apple id at the bottom of the page, and then sign out. Sign back in again, and try again.
Also, check you have enough remaining space on your iPad for the app you want to download, you can do this in settings, then general, then usage.
I also reccomend buying the app in iTunes on your computer, and then syncing it to your device.
Let me know how you get on, and I'll get back to you with further help if needed,
Nathan

Cannot install itunes, getting error message 8.0.50727.6195

cannot install itunes, getting error message 8.0.50727.6195. Any ideas?

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Cannot install itunes. get error message program RSVCR80 not installed. windows error 126.

cannot update or install itunes. ger error message RSVCR80 not installed. windows error 126.

Hey sndlot,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so arearticularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Regards,
Delgadoh

HT201210 When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid

When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid?

Temporarily disable any security software on the computer and try again.

I am trying to update my 3GS to the IOS 5 i keeping getting an error message while updating and it tells me i will lose eveything on my phone please help

I am trying to update my 3GS to the IOS 5 i keeping getting an error message(-50) while updating and it tells me i will lose eveything on my phone please help. my phone is IOS 4.3.5.

See if this Helps
Delete Photo Cache
http://support.apple.com/kb/TS1314
If on a Mac...
Goto Home > Pictures > iPhoto Library...
Right Click and choose Show Package Contents...
Find the Folder called iPod Photo Cache and drag it to the Trash...
Close the Finder Window..

Need help installing keep getting error message when i install program

i download the beta version on my android epic phone by sprint and when i go to install the program it shows a screen installing then an error message pops up almost immediately and say that application was not installed how do i fix this i have tried to re-download it and install it again but it gives the same error message every time now i have also allowed outside markets apps to download on my phone and i still get this error message or what do i need to do to get it installed on my phone?

Firefox might not be able to run on your mobile . See [https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements System requirements for Android mobile] and [https://wiki.mozilla.org/Mobile/Platforms/Android#Known_Issues Known issues for mobiles]

Sync Error message reprocessing in MI server

In MI 2.5 server, all sync error messages with staus I-Error need to be resolved manually and then reprocessed.
Errors are generally data issues(Equipment type mismatch etc).
In MI 7.1 , there are better data monitoring and administration capabilities. Is there a better automated way in MI 7.1 where by some of the I-Error status messages could be corrected and reprocessed based on some defined logic and rules.
Thanks & Regards,
Amandeep Aggarwal

Hi,
custom services plugged-in in the message flow can be used to correct the fields of the message during the processing.
Since your requirement is to modify the message only incase of errors and during re-processing, the custom service has to be a little more intelligent than just modifying the data ..like reading from DOE monitoring data to figure out whether that message failed and is being re-started which is possible as far as i think.
In tcode sdoe_wb on selection of your SCV.,expand the data object and inturn the flow definition tree. Choose the flow where you wish to add a custom service. Press create button in right panel. Give FM or class method. Save it and generate your data object.The message body and the message header is available as parameters in the custom service , there are some specific places where a write service could to be placed and so on..
You can also refer the sample custom service SDOE_SAMPLE_CUSTOMSERVICE class shipped by SAP.
To know more about custom services, check out this link : [custom services|http://help.sap.com/saphelp_nwmobile71/helpdata/en/6d/bf104d163849d1af313c492655e0f7/content.htm]
Regards,
Liji

Hi, trying to watch Sky TV on laptop - installed Silverlight but error message says unable to watch Sky while in a private browser. Can I come out of this thru Firefox?

Hi, trying to watch Sky TV on laptop - installed Silverlight but error message says unable to watch Sky while in a private browser. Can I come out of this thru Firefox?

There has been a change in where Firefox searches for plugins and the plugins folder in the Firefox program folder is no longer scanned for plugins, so Firefox won't find them anymore if they are installed in the plugins folder instead of the "browser\plugins" folder that Firefox now scans.
You can set the plugins.load_appdir_plugins pref to true on the about:config page to make Firefox scan the "<install>/plugins/" directory for plugins like the WMP plugin (np-mswmp.dll).
You can alternatively move plugins from "<install directory>\plugins\" to "<install directory>\browser\plugins\" (create this folder when missing) to make Firefox find them again.
*http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
*http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/
*https://support.mozilla.org/kb/windows-media-or-other-plugins-stopped-working
*[http://www.flatplanet.tv/שידור-חי/ערוץ-1]

My iTunes update install failed. Error message says MSVCR80.dll is missing from my comuputer. What is that and where do I get it?

My iTunes update install failed. Error message says MSVCR80.dll is missing from my comuputer. What is that and where do I get it?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Problem installing i tunes Error message in Dialoque Box

Problem installing i tunes Error message in a Error Box "Installation source for this product not available, verify source exisits , - The feature you are trying to use is on a network resourse that is unavaialble
Also message reads Installation source for this product is not available, verify source exists
I have tried to unistall I tunes using Revo Uninstaller, and get the same message box as when I'mtrying to install I tunes
I have downloaded the latest version, but cannot install it, I have tried to re -install from my computer an old version, but a message come back stating a newer version is already installed, have selected the two boxes in the Dialoque box and the same message comes back
Please help

"Installation source for this product not available, verify source exisits , - The feature you are trying to use is on a network resourse that is unavaialble
Which particular .msi file (or files) does the message (or messages) go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

When installing is get error message "an error has occurred when attempting to change modules'

When installing is get error message "an error has occurred when attempting to change modules' it then locks up

Start with the troubleshooting steps described here.

When downloading ios 5 to my itunes an error message saying "the network connection has timed out" keeps popping up. how do i fix this?

when downloading ios 5 to my itunes an error message saying "the network connection has timed out" keeps popping up. how do i fix this?

Temporarily dip ****.
And excluding the extremely high network traffic due to the many millions of users downloading the update a day or two after is was released, this is a problem with that swiss cheese for security garbage OS that is Windows only, which is the joke. An update that is now running on 1 in 3 compatible iDevices which is in the 10's of milllions is vaporware Einstein?
If I were your rep, I would tell you to **** off. Go get Windoze mobile devices.

IOS 7.04 install causing sync error message

Similar Messages

Maybe you are looking for