IOS 7.1.2 apps will not install on the iPhone - error message "not compatible with this iPhone"???

I am using a 4s with ios 7.1.2 and recently any app I am trying to use or load will not work and I get error message the app is not compatible with my iPhone; however, the requirements in every case indicate they are compatible with 4s and ios 6 and greater. Honestly, seems like I have one problem after the other with the iPhone

Thanks, unfortunately that is another problem that is occurring, when I go to Update Software I get the message that software is up to date, with version being 7.1.2, I have tried to update through itunes, wifi, etc, and it indicates the software is up to date.

Similar Messages

  • Upgrade would not install (3.6.8) error message Licence file for this version could not be found

    The latest upgrade 3.6.8 downloaded but would not install. Error message read "the licence file for this version could not be found.". Visit Firefox homepage for more info
    == I tried to install the latest Firefox upgrade. Have tried about 6 times

    It can also help if you delete the Firefox program folder (C:\Program Files\Mozilla Firefox) before installing a new full Firefox copy.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that are locked in any way.
    You can skip the step to create a new profile, that is not necessary for this issue.

  • I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
    Final Cut Studio 2 (Including Final Cut Pro 6)
    • A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
    • 1GB of RAM
    • An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    • A display with 1024-by-768 resolution or higher
    • Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
    • QuickTime 7.1.6 or later
    Additional Recommendations
    • 2GB of RAM when working with compressed HD and uncompressed SD sources
    • 4GB of RAM when working with uncompressed HD sources
    • A display with 1280 x 1024 resolution or higher
    Additional Requirements for Motion
    • A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
    • A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
    • For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
    Additional Requirements for Color
    • The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
    • ATI Mobility Radeon X1600
    • ATI Radeon X1600
    • NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
    • For 32-bit rendering: a graphics card with at least 256MB of VRAM.
    • A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
    • A three-button mouse for full functionality
    Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535

  • I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours.

    I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours. Don't have the lion disk... Drivers seem impossible to get. Please help!

    lan drivers*

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • Windows 8 I have. The same error message not identifying I pod nano properly....I stuck, tried everything.

    Windows 8 I have. The same error message not identifying I pod nano properly....I stuck, tried everything.

    Hello btallai,
    If you are having issues with a "not identified properly" error message when connecting your iPod nano to your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
    iPod nano: Error message saying that iPod could not be identified properly - Apple Support
    Sincerely,
    - Brenden

  • ITunes will not install, I get an error message: Could not open key:HKEY_LOCAL_MACHINE_software_classes_CLSID

    I tried to reinstall iTunes 10.5 on an older PC using Windows XP. iTunes will not install. Tthis is the full error message. Could not open key: HKEY_LOCAL_MACHINE\software\classes\CLSID\{063D34A4-BF84-488D-B699-E8CA04DDE}
    Please Help

    I was able to solve this problem using the utility explained in this post:
    http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
    Thanks!
    Dell Windows XP

  • Itunes 11 has downloaded but will not install on my pc, error message below

    no idea how to fix this....
    have downloaded i tunes 11 successfully but it won't install. it comes up with....
    the cabinet file 'iTunes.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package."
    anyone have any helpful tips?

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?)

  • I attempted to download ITunes up date 11.1.4 and it would not install. Got two error messages, error 7 windows error 126 an "privileges. Also meesage that msvcr80.dll was missing. Would like help.

    I attempted to download itunes up date 11.1.4 and it would not install. Received the following error messages: error 7 windows error 126 and "privileges. Did uninstall itunes , but could not ger new download. What do you suggest?

    Hello, Jack. 
    You will find this article helpful in troubleshooting the error that you are receiving.
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/ts3074
    Regards,
    Jason H.

  • What app will allow me to find my friends/family on androids with my iphone

    what app will allow me to find my friends/family on androids with my iphone

    I haven't used it myself but here is one you may want to evaluate: https://itunes.apple.com/us/app/gps-tracker-follow-other-phones/id466429552?mt=8

  • Itunes will not install on windows vista (error message)

    I just got an ipod and am new to this kind of device. I tried to download the itunes from the apple ipod start page. The itunes download ok except for the itunes application, in which it says it can't install the itunes application then it ends with "error 50". I would have to attempt to download again to re-read the error message to be exact. Any suggestion will help thanks.

    Praise God - I found the solution after hours of work: (1) Uninstall all Apple programs (itunes, Quicktime, Bonjour, .....); (2) Go to "Common Files" and delete all Apple files - this might be difficult for some are locked from you - you may have to change the "Owner" of the file in order to delete it - if that doesn't work "Rename the Apple Follder to something like Apple Old - that's like deleting it.  Then download 10.5 from Apple and away you go - yippee.

  • Software updates will not install...  error message

    Software updates refuse to install for several weeks/months... backed up to six or more updates... cannot get any help from apple unless i pay them 75 dollars but i am sure it is something simple... when i attempt to update, i put in my pass code, they download and when they go to install the error message says "none of the checked updates can be installed, sorry an unexpected error has occurred" vague enough for you? Can anyone help me out, it would be greatly appreciated. Thanks in advance.

    What happens when you run Software Update?
    Get MacJanitor and run the Maintenance scripts. When it's finished quit MacJanitor and restart your Mac.
    Have you checked the hard disk for errors?
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 15% free disk space. Not enough disk space can cause directory corruption.
    If you cannot boot from your install disk, try booting in Safe Mode
    Carolyn

  • Itunes will not install.  I get error message about Mobile Device

    Same error message all the time.  MSVCR80.dll...I have uninstalled and reinstalled Itunes 7 times now, and I get the same error message

    Hello pam0743,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    it may be necessary to remove all traces of iTunes and related software components from your computer before reinstalling iTunes.
    1. Remove iTunes and related components from the Control Panel
    2. Verify iTunes and related components are completely uninstalled
    3. Reinstall iTunes and related components
    Best of luck,
    Mario

  • I installed Office:mac 2011 on my new iMac running 10.8.3 and discovoed my file transfer from my old macbook installed Office:mac 2088. Now I have both installed and none of the office apps work - I keep getting the same error message

    I recently purchased an iMac to replace my 2008 macbook.
    I used migration assitant to transfer all of my macbook files to the iMac. I noticed that I had the old 2008 version of Office:mac 2008 on the iMac and decided to install Office:mac 2011 which installed successfully.
    However, now I can't open excel or word or powwerpoint now using either 2008 or 2011.... I just get an error message saying there was an error and the app had to close. It offers to send a report to Microsoft.
    I tried moving Office:mac 2008 to trash but this didn't resolve the issue.
    Can anyone help (I am not a really sohpisticated user so be gentle)
    Thanks Dave

    Hello Dave,
    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • When trying to install nwds tool , showing error message not properly insta

    hi ,
    when i am trying to install nwds in system, it showing error message at the end stage.
    The following program files could not be registered:
    *     c:\windows\sapwksta\setup\splash.dll*
    *     c:\program files\common files\sap shared\wdadobecontrol.dll*
    *     c:\windows\system32\librfc32.dll*
    *     c:\program files\common files\sap shared\sapchart.ocx*
    The installed applications may not function correctly until all program files are successfully installed.
    what is the problem. when i am click on nwds icon on desktop, it showing error message
    c:\program files\sap\ide\ide7.0\eclipse\sapide.exe is not valid wid 32 applicaiton.
    i installed java and gave environment variables settings . it is not a problem.
    please give reply

    Hi Sujana,
    I am also faced the same issue when I install the NWDS softward.
    Reason: Maybe you have install higher version NWDS.Beside that SAPGUI will also use librfc32.dll.
    Solution: Please delete librfc32.dll in c:\windows\system32 and install again
    I have did the same thing, itsh installed successfully.
    Hope it shold works fine.
    Regards,
    Venkata Ramireddy

Maybe you are looking for

  • Upgrade OS 10.5.8 to Snow Leopard - any problems?

    My computer info: Model Name: iMac Model Identifier: iMac8,1 Mac OS X Version 10.5.8 Processor: 2.8 GHz Intel Core 2 Duo Memory: 2 GB 800 MHz DDR2 SDRAM Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 6 MB Memory: 2 GB Bus Speed: 1.07 GHz

  • [ Solved ] Issue with Partitioning (setting the boot flag)

    I've tried to install Arch a few times. I always seem to run into this issue which affects me later on. fdisk (fdisk /dev/sda) doesn't provide me with the ability to set the boot flag on any of the partitions. Therefore I have issues when I get to th

  • Oracel Database 11g Release 2 Connection with  Forms Builder 10g

    I installed Oracle Database 11g at Microsoft window 32-bit , Now I want to connect it with my forms buider 10g developersuit. Please tell me ho do I connect it.

  • Image quality with ATV 3rd gen

    Hi.  I have a 2nd gen ATV and am very happy with it.  I use it to stream movies from my iTunes library on my Mac, and occasionally from Netflix.  I recently  bought the 3rd gen ATV.  Over the weekend I used the 3rd gen ATV to stream portions of some

  • Many problems with new iPod nano

    I had an iPod Mini for a year, and never had any problems with it. Last month, I bought a Nano (4 GB), and I've already had several problems. Has anyone else experienced these issues? 1. When I jog with it (which is very often), it often skips. 2. Se