IOS 7.1 Header info (clock batt. etc) is dim in Videos App.

iPad Air Videos App. the header info is dim.

I went to the mall and checked out the store iPad Air with iOS 7.1.  It has the same problem with mine, the music videos sound is louder than movies or tv shows media.

Similar Messages

  • IPad 16GB iOS 8.1.1 upgrade and now cannot open Music and Videos apps

    My iPad 16GB installediOS 8.1.1 upgrade and now cannot open Music and Videos apps...HELP?

    Since yesterday morning about 11:00 I have been having TERRIBLE email problems on this iPad 3G. Email comes in (I hear the sound) but nothing displays -- no folders, no content, no nothing in e-mail. The blank email screen shows up and then disappears after about 10 seconds, taking me back to the Home Screen.
    Right now, the only way I can see email on this device is to log onto AOL via the AOL app.
    I have been doing a lot of online reading about the problem. It has to do with iOS 8.1.3 and it affects older iPads and iPhones. I'm having no problems on my iPod touch, which -- fortunately -- is so old it cannot update its iOS 6.
    I waited to update the iOS on this iPad until iOS 8 was "mature." That was about 2 weeks ago.
    Anybody know know if Apple is aware? working on a solution?

  • I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and paste and doing the header separately from the text.

    I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and pasting   the header separately from the text. I know there is a way besides a screen shot but I've spend hours trying to find it.

    Smurfslayer wrote:
    For the particularly persnickety types you might want to expose the full headers in the email message as well.  It's easy enough to do, from mail's 'menu' select "view"; then "message"; then all headers.
    Another option you could use is a screen capture using Grab.
    Activate Grab, then shift + command + w (for a window screen shot).  Then confirm the window selection and click the mail message. 
    Dave
    Why are you addressing this to me...?
    I am not the OP...

  • Upgraded to 8.3, now auto fill is not working. I have checked, rechecked my info, saved passwords, etc. to no avail. Is this bug in 8.3. Never did this until I upgraded.

    Upgraded IPad to to 8.3, now auto fill is not working. I have checked, rechecked "my info", "saved passwords", etc. to no avail. Is this bug in 8.3. Never did this until I upgraded. Wife is not happy I upgraded!

    Auto fill works for me in iOS 8.3.
    Try the standard troubleshooting steps in this order:
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
    Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
    See here for more details on restore: https://support.apple.com/en-us/HT201252
    If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

  • HT4623 i have an ipad2 and cannot find how to upgrade to ios 6, despite visiting apple site, itunes etc. Apple is normally intuitive but this is a real labarynth?

    i have an ipad2 and cannot find how to upgrade to ios 6, despite visiting apple site, itunes etc. Apple is normally intuitive but this is a real labarynth?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Unable to get Http Header info in webservice Handler

    Hi,
    I have been trying to get the Header info in my custom Handler unsuccessfully
    for the past few days.
    Upon web search, I am constantly redirected to use a Servlet filter to get the
    headers. I have to use the Weblogic Native SOAP engine and not any Servlet Filters.
    In Axis, I can do a (HttpServletRequest)messageContext.getProperty(HTTPConstants.MC_HTTP_SERVLETREQUEST)
    which returns the HttpServletRequest and then I can get the headers off that.
    I can't find something similar in WebLogic. Any ideas?
    Any help in helping me track this problem down would be much appreciated.
    Thanks,
    Sridhar.

    Yes, you are correct that you are taking a risk by using the "__BEA_PRIVATE_BINDING_PROP"
    property, on the MessageContext object. The mechanism I provided is the recommended
    (and supported) way to get the HTTP headers, as it only uses "documented" class.
    Some developers think you are trying to "hide" something with undocumented classes,
    but I don't think this is the case with BEA. There are good reasons and the point
    you made about the likelihood of an unannouced future change breaking your code,
    is probably pretty high on the list :-)
    Getting the REMOTE_ADDR (or REMOTE_HOST) would most likely require the "undocumented"
    approach you've taken. You could get the HttpServletRequest from this same HttpServerBinding
    object, and call the getRemoteAddr() method on it. However, I really, really,
    really think you should consult our "fantabulous" BEA support department, to see
    if doing this will be supported.
    Regards,
    Mike Wooten
    "Sridhar" <[email protected]> wrote:
    >
    Michael,
    Thanks a bunch for your reply. I have been going crazy over this and
    your reply
    made my day.
    I still have a slight problem with this though. This does not seem to
    give me
    the Client IP etc. Any ideas to get that?
    Thanks again for the code. It was a great help.
    Sridhar.
    PS BTW, I found another way of getting the same info:
    HttpServerBinding httpBinding = (HttpServerBinding) messageContext.getProperty("__BEA_PRIVATE_BINDING_PROP");
    Enumeration headerEnum = httpBinding.getRequest().getHeaderNames();
    while (headerEnum.hasMoreElements()) {
    String header = (String) headerEnum.nextElement();
    System.out.println("header = " + header);
    System.out.println("header Value = " + httpBinding.getRequest().getHeader(header));
    But, I am guessing BEA doesn't want me to go this route as they might
    change the
    implementation and my code will immediately break.
    "Michael Wooten" <[email protected]> wrote:
    Hi Sridhar,
    You should be able to get at the HTTP Headers that were sent by theconsumer
    of
    your web service, by using the following code in your JAX-RPC handler:
    import java.util.Iterator;
    import javax.xml.rpc.handler.MessageContext;
    import javax.xml.rpc.handler.soap.SOAPMessageContext;
    import javax.xml.rpc.JAXRPCException;
    import javax.xml.soap.MimeHeaders;
    import javax.xml.soap.MimeHeader;
    import javax.xml.soap.SOAPMessage;
    public boolean handleRequest(MessageContext mc)
    SOAPMessageContext messageContext = (SOAPMessageContext) mc;
    try
    SOAPMessage original = messageContext.getMessage();
    MimeHeaders mimeheaders = original.getMimeHeaders();
    MimeHeader mimeheader = null;
    Iterator iter = mimeheaders.getAllHeaders();
    for (; iter.hasNext();)
    mimeheader = (MimeHeader) iter.next();
    System.out.println("name=" + mimeheader.getName() + ", value="
    + mimeheader.getValue());
    catch (Exception e)
    e.printStackTrace();
    throw new JAXRPCException(e);
    Here's the output from the System.out.println():
    name=Content-Type, value=text/xml
    name=SOAPAction, value=""
    name=User-Agent, value=Java1.4.1_05
    name=Host, value=localhost:7001
    name=Accept, value=text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
    name=Connection, value=Keep-Alive
    name=Content-Length, value=505
    Regards,
    Mike Wooten
    "Sridhar" <[email protected]> wrote:
    Hi,
    I have been trying to get the Header info in my custom Handler unsuccessfully
    for the past few days.
    Upon web search, I am constantly redirected to use a Servlet filterto
    get the
    headers. I have to use the Weblogic Native SOAP engine and not any
    Servlet
    Filters.
    In Axis, I can do a (HttpServletRequest)messageContext.getProperty(HTTPConstants.MC_HTTP_SERVLETREQUEST)
    which returns the HttpServletRequest and then I can get the headersoff
    that.
    I can't find something similar in WebLogic. Any ideas?
    Any help in helping me track this problem down would be much appreciated.
    Thanks,
    Sridhar.

  • Mac Mail header info gone

    How do you put the header info back? Sender, Subject, Attachment save option etc are suddenly missing from incoming email.
    The email just displays the letter portion only.

    Open up the Mail preferences. Go to the "Viewing" section. There is a dropdown listbox for Header Details. You can set that back to default.

  • How To Copy and Print Multiple Message Basic Header Info

    Is there a way to highlight multiple messages and then copy, print or export ONLY the basic header info such as From/To/ Subject/Date/Time, etc?
    I've tried several things but always get the entire message when I select and try to copy or print a list from the Inbox or other mail boxes.
    I looked at this article that seemed promising:
    http://email.about.com/cs/macosxmailtips/qt/et071803.htm
    . . . but can find no such "print selected summaries" dialogue or option to do so.
    Any suggestions?
    This would be for a printed list of email headers such as one's secretary might give one or email to one as a "heads-up" of what's on tap.
    JoeL
    PowerMac 1.25 DP, 1TB HDs, 1.75GB RAM, Superdrive   Mac OS X (10.4.6)  

    What I was hoping was that the features had been moved but were still available. Apparently now you can only copy and paste or print the entire message except if it's HTML in which case, that text cannot be coped from a header list.
    Thanks!
    JoeL

  • Sync performed on new iphone 4, and all my new info (contacts, pics, etc.) GONE!  It went back to my old iphone info....  how do I get my iphone 4 info back!!??

    sync performed on new iPhone 4, and ALL my new info (contacts, pics, etc)  GONE!!  It went back to my old iPhone info... how do I get my iPhone 4 info back??  The look and everything about the phone is like I have the older version!!!  I'm sure the data was backed up... but where, and how do I retrieve!!???

    If you don't have the prior computer backup files, you may want to look at this to get your information from the phone:
    http://www.wideanglesoftware.com/touchcopy/index.php

  • How to Include "all" header info when you Reply and ReplyAll

    Using Mail 3.5, when I Reply or ReplyAll I need to have "all" header info included automatically (From, To, CC, Subject, Date) which does occur when Forwarding but not when Replying to one or all. A REAL issue in the corporate world. Is there any way to accomplish this???
    Thanks,

    Did you ever get a reply to this question or did you manage to solve the issue in any way or shape? I am experiencing the same so eager to hear a solution.
    Thanks!

  • Java Mail header info displayed in email results

    I am having problems with the output generated by the send() method in javamail. The out contains unwanted email header info within the email. Please review code and email output. The Cc: thru Content-Transfer-Encoding should not display
    -Thanks....
    Greg
    Code :
    +++++
    Session session2 = null;
    Properties props = new Properties();
    if (ConfigInfo.getBatchJob() == false) {                       
         InitialContext ic = new InitialContext();
         Session session = (Session) ic.lookup("myMailSession");
         props.put("mail.from", fromAddress);
         session2 = Session.getInstance(props);
    } else // email from batch job
         props.put("mail.store.protocol", "pop3");
         props.put("mail.transport.protocol", "smtp");
         props.put("mail.host", ConfigInfo.getMailHost());
         props.put("mail.smtp.host", ConfigInfo.getMailHost());
         props.put("mail.from", fromAddress);
         session2 = Session.getInstance(props);
    Message msg = new MimeMessage(session2);
    msg.setFrom();
    msg.setRecipients(Message.RecipientType.TO, InternetAddress
              .parse(toEmailAddress, false));
    msg.setRecipients(Message.RecipientType.CC, InternetAddress
              .parse(copyEmail, false));
    msg.setRecipient(Message.RecipientType.CC, new InternetAddress(
              copyEmail));
    msg.setSubject(subject);
    msg.setSentDate(sentDate);
    msg.setContent(content, "text/plain");
    Transport.send(msg);
    Output:
    +++++
    ....... Unwanted email header info <<<<<<<<<<
    Cc: [email protected]
    Mime-Vesrion 1.0
    Content-Type: text/plain
    Content-Transfer-Encoding: 7bit
    ----

    Hi,
    Thanks for the info.
    The Extra Text is not to be seen now. That’s good. But I have another issue now. The email skips new lines.
    If I have a new line in between the two blocks , the email skips the new line.
    e.g. If I had to sent the following data:
    "Line1
    Line2"
    It appears as "Line1 Line2" in the end. The new line is skippeed.
    Appreciate if someone can tell me the reason/solution.
    Regards,
    ParagJ

  • How to output header info. by using DMEE?

    Hi,
    When I am using DMEE to output payment file, I need to put a header info. before the itemlized transactions. For bank like Citibank, only need each transaction lines, so no header need to put. But some bank, need a header info. in front of the itemlized transactions. So could you guide if how I could set a header?
    I tried to use level and change the repetition, but did not succeed.
    Thank you very much!

    I've find out the solution. Just create another segment as the header, and set this segment as level 1, the same level as the father segment group. And this will just only output once.
    > Hi,
    >
    > When I am using DMEE to output payment file, I need
    > to put a header info. before the itemlized
    > transactions. For bank like Citibank, only need each
    > transaction lines, so no header need to put. But some
    > bank, need a header info. in front of the itemlized
    > transactions. So could you guide if how I could set a
    > header?
    >
    > I tried to use level and change the repetition, but
    > did not succeed.
    >
    > Thank you very much!

  • Gethttprequestdata() not returning all header info. with CF10, should it?

    Our Single SignOn agent (SiteMinder) places a custom variable, HTTP_EMPLOYEEID in the header.  Using ASP, I can dump the header info and see that variable/value. But, with a similar CF script, some info, including HTTP_EMPLOYEEID is not there.  Any ideas?

    Thanks for the help. Unfortunately it didn't work.  I'm working with my IT people, who installed and configured SiteMinder(user authentication agent) so I haven't dug into that, but they insist the problem lies with CF10.  Using the following ASP script I can read the custom header variable EMPLOYEEID:   <%= Request.ServerVariables("HTTP_EMPLOYEEID") %>  But, with my CF script there doesn't appear to be a header variable by that name.      I tried:
    GetHttpRequestData().headers.employeeid, then 
    GetPageContext().getRequest().getHeader("HTTP_EMPLOYEEID"),
    and
    CGI.HTTP_EMPLOYEEID
    Is there any reason why CF10 would not read the entire header content?  When I cfdump the header I see other variables, but not EMPLOYEEID. Strange.

  • Not able to Pass header info to Microsoft MapPoint WebService using WLS10

    We are passing some Header info to the MapPoint Web Service from our client Web Service which is hosted in Weblogic 10, however we are not sure if the info is getting passed.
    The actual soap header which we are trying to postis as below:
    <env:Header xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
    <m:CustomerInfoFindHeader xmlns:m="http://s.mappoint.net/mappoint-30/">
    <m:CustomLogEntry>2</m:CustomLogEntry>
    </m:CustomerInfoFindHeader>
    </env:Header>
    We are using the below code snippet for setting the header:
    Document doc = null;
    try
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    factory.setNamespaceAware(true);
    doc = factory.newDocumentBuilder().newDocument();
    catch(ParserConfigurationException pce)
    System.out.println("ERROR -> " + pce.getMessage());
    Element header = doc.createElementNS("http://schemas.xmlsoap.org/soap/envelope/", "SOAP-ENV:Header");
    Element headerContent = doc.createElementNS("http://s.mappoint.net/mappoint-30/","m:CustomerInfoFindHeader");
    Element headerChildContent = doc.createElementNS("http://s.mappoint.net/mappoint-30/", "m:CustomLogEntry");
    headerChildContent.appendChild(doc.createTextNode("2"));
    headerContent.appendChild(headerChildContent);
    header.appendChild(headerContent);
    Attr nsAttr = doc.createAttributeNS("http://www.w3.org/2000/xmlns/","xmlns:m");
    nsAttr.setValue("http://s.mappoint.net/mappoint-30/");
    headerContent.setAttributeNodeNS(nsAttr);
    findServiceControl.setOutputHeaders(new Element[] {header});
    Here findServiceControl is the Service Control object.
    Even if the code is not throwing any error/exception I am not able to see the header portion which invoking the Mappoint Web Service (using the weblogic test client for testing the webservice).
    Is there any other methodology for setting the header.
    Regards
    Sanjeev Singh

    If you're not sure the header is being created properly, you should switch to using a javax.xml.transform.stream.StreamSource and javax.xml.transform.dom.DOMResult. For instance:
    import java.io.ByteArrayInputStream;
    import javax.xml.transform.TransformerFactory;
    import javax.xml.transform.Transformer;
    import javax.xml.transform.dom.DOMResult;
    import javax.xml.transform.stream.StreamSource;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    StringBuffer xml = new StringBuffer()
    .append("<env:Header ")
    .append("xmlns:env=\"http://schemas.xmlsoap.org/soap/envelope/\">")
    .append("<m:CustomerInfoFindHeader xmlns:m=\"http://s.mappoint.net/mappoint-30/\">")
    .append("<m:CustomLogEntry>2</m:CustomLogEntry>")
    .append("</m:CustomerInfoFindHeader>")
    .append("</env:Header>);
    TransformerFactory xformFactory = TransformerFactory.newInstance();
    Transformer transformer = xformFactory.newTransformer();
    ByteArrayInputStream bais = new ByteArrayInputStream(xml.toString().getBytes());
    DOMResult result = new DOMResult();
    transformer.transform(new StreamSource(bais), result);
    Document document = (Document)result.getNode();
    findServiceControl.setOutputHeaders(new Element[] {document.getDocumentElement()});
    If you want to see the SOAP request being sent to the Mappoint Web Service, add the following to the JAVA_OPTIONS environment variable (in the startWebLogic.cmd file), and bounce it:
    -Dweblogic.wsee.verbose=*
    -Dweblogic.log.RedirectStdoutToServerLogEnabled=true
    This will write the SOAP request (and SOAP response) to the server log of the WebLogic Server instance, which the service control is running in.

  • I have updated my iPad to IOS 8.1.2. And now I cant watch any videos anymore. Not on Facebook, YouTube, etc. How can I fix this?

    I have updated my iPad to IOS 8.1.2. And now I cant watch any videos anymore. Not on Facebook, YouTube, etc. How can I fix this?

        We also want your phone to work the way it should be working for you.
    How long does a charge last since the update?
    Have you reset the network settings? Settings>General>Reset>reset Network Settings>Enter 4 digit passcode>Reset Network Settings
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for