Ios 7.1 no service after upgrade

I upgraded 2 Verizon 5s phones to IOS 7.1 using iTunes (from 2 different computers). Both phones seemed to complete normally but after upgrade neither phone was able to connect to the cellular network. I tried resetting network, then all settings, then cleared and reset all and still can't get a signal.
I know that some sprint users are also reporting issues.
Any ideas how widespread the issue is?
Thanks for any ideas

You probably need to do a soft reset.
Reset iPhone
Note: This will not delete any data.
To reset iPhone, hold down both the Home button and the Lock button until you the screen goes dark and the Apple logo appears.
This should solve your problem.
 Austin

Similar Messages

HT5012 Why my smart sim is no service after upgrade ios7 from iphone4

Why my smart and globe sim is no service after upgrade ios7 from ios 6?

Hi Kenshaine,
I am in the same situation and my 4s is facing the same issue..It seems APPLE cant help us!! ***!

HT4061 Hello my iPhoneOS entered icloud ios 7.0.4 mode after upgrade

Hello my iPhoneOS entered icloud ios 7.0.4 mode after upgrade .How to solve?

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

My iPad Mini Retina LTE got No Service after upgrade to IOS 8.1

After upgrading to IOS 8.1 my iPad Mini Retina lost GSM signal and No Service indication appears in top left screen.
Tried to reset, switch off without positive results.
With manual carrier search, my carrier is still in the options but no results.
Please help

I upgraded ipad mini 2 with LTE from 7.1.2 straight to 8.1.2 hoping all the bugs are ironed out by now.... nope!
Got the free 200MB/mo Tmobile sim and 4G works. LTE network connection seems fine. I get an LTE next to Tmobile on the status bar. But I get a message saying "Could not activate cellular data network. You are not subscribed to a cellular data service." as soon as I try to use a browser.
With AT&T sim, 4G works just like Tmobile, but as soon as I switch on LTE, there is no network connection at all with "No Service" on the status bar and falls back to 4G after a while. So seems like something broke LTE even on 8.1.2.

What happened to our web services after upgrading to 701?

Hi,
We started using web services on a 700 server. Looks something like this.
SAP_ABA     700     0018     SAPKA70018     Cross-Application Component
SAP_BASIS     700     0018     SAPKB70018     SAP Basis Component
PI_BASIS     2005_1_700     0018     SAPKIPYJ7I     PI_BASIS 2005_1_700
We could create a proxy in vb.net and call our SAP web services like this:
        Dim ws As New sapserver.webservice1
        Dim input As New sapserver.ZGetuname
        Dim output As New sapserver.ZGetunameResponse
        out2 = ws.ZGetuname(input)
After upgrading to nw ep 7.1, which looks like this.
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0007     SAPKB70107     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
We no longer get the same input and ouput classes generated for us when consuming the service. It looks like it is now expected to be called like a function    ws.ZGetuname( param 1, param 2).
We would like to be able to generate the proxy the same way as before. Any ideas?
Thanks.

What happened to the file numbers after switching to Photos. It would be nice to still have the file numbers show.
You mean, the filename with the number on the card?
Photos does not use the filenames as a title, when displaying the thumbnails. The filename will only show in the Info panel.
Copy the filenames to the title field in the Info panel and then enable "Metadata" in the View menu.
I wrote a script to copy the filenames automatically to the title field, see:
Photos for Mac: Batch Changing the Titles to the Filename

No service after upgrade to ios5

My phone keeps losing the signal of my carrier and keeps on searching for service. Is there a fix?

Same problem here (Argentina). I have a factory unlocked iphone 5 GSM but after upgrade (without SIM CARD) when I put the sim it es searching for network and then NO SERVICE. Any help??

IOS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this.

OS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this help.

I attempted to uninstall QT and reinstall- the QT 7.4 installer failed to install (it said a more up to date version was present, even though I'd trashed the old one). I downloaded and reinstalled 7.5 but itunes still did not work.
While my solution wasn't ideal
1) It was what Apple told me to do!
2) It seemed preferable to A) A complete system reinstall, B) removing 264 .plist files one at a time, rebooting, and seeing which one was causing the problem.
I still have the old .plist files in another folder, and can replace them in my preferences folder if I decide I need them. Most apps will create a new .plist file on start-up if there is not one present, so unless it is a program where I have gone to great lengths to change preferences from default, I'm guessing I will not notice much difference (and if I do, I can always go to my archive of .plists, or on Time Machine for that matter...)

IPad 2 lost cellular service after upgrade to iOS 8.1

Device: iPad 2 Model A1397 16GB
My cellular service worked fine prior to the upgrade to iOS 8.1. After completing the upgrade, my cellular connection always says "Searching..." and never finds service. I have tried restoring iOS 8.1 through iTunes, but end up with the same results. I'm new to upgrading apple devices, so I didn't create a backup of my OS prior to upgrading. With Apple not signing iOS 7.1.2 anymore for my device, I'm in a bit of a pickle and cannot revert back. Any suggestions?

Make sure ringer is on and volume is up.

Celullar Data Lost or "No Service" after Upgrade iOS 8.1

Hello all member,
I've been using iPad4 for about 8 months.
This problem happened after I upgrade to iOS 8.0.2, after I upgraded to ios 8.0.2 my phone signal started "no service".
FirstIy, I think there is a problem with my sim card, and then I've replaced with some other sim card. But the problem still not solved.
Second opinion, i tried to Reset >> Network Setting. But the problem still there.
Last option, i tried to Full Reset but still find my celullar is "No Service"
For about 3 weeks, I get notification for iOS 8.1 and I upgraded it last night.
But the problem still exist, my cellular data connection still "No Service".
Is there anyone here who can help me?
Thanks for all advice.

I upgraded ipad mini 2 with LTE from 7.1.2 straight to 8.1.2 hoping all the bugs are ironed out by now.... nope!
Got the free 200MB/mo Tmobile sim and 4G works. LTE network connection seems fine. I get an LTE next to Tmobile on the status bar. But I get a message saying "Could not activate cellular data network. You are not subscribed to a cellular data service." as soon as I try to use a browser.
With AT&T sim, 4G works just like Tmobile, but as soon as I switch on LTE, there is no network connection at all with "No Service" on the status bar and falls back to 4G after a while. So seems like something broke LTE even on 8.1.2.

Ipad 2 shows No Service after upgrade to IOS 8.0.2

Hi I have upgraded to latest IOS 8 on my Ipad 2 but know i keep getting "No Service". I have reset networks, did a back up etc etc.tuned it on and off
works fine for a short time and them goes back to No service
Please help

Which iCloud update do you mean? iCloud drive?
I've tried this as well but all of the "workarounds" explained here in the forum are solving the "no service" issue only temporarily... Unfortunately also the one I described above. Sometimes the network lasts the whole day long, sometimes it breaks within a few hours.
This is annoying me so much, that if Apple doesn't provide a solution soon, this will be the last Apple device I've bought! My pleasure has gone during the last years, last but not least cause of the increased screen size of iP6. But this is another topic...

No service after upgrade ios 613

My name is fauzan, I use iphone 3gs in Inonesia,
3 years ago I bought an iphone 3gs using operator Softbank of Japan, then 2 years later I was brought back to Indonesia and now I live in Indonesia.
I use in Japan 1 year, 2 years in Indonesia.
, yesterday I upgrade early ios 313 to 613, in Indonesia for 2 years I used ios 313 without any problem, because they yesterday I upgrade iphone 3gs ios 613 now belongs to me can not be used (no service).
please its support to solve this problem my iphone 3gs.
thank you.
My email: [email protected]

You probably need to do a soft reset.
Reset iPhone
Note: This will not delete any data.
To reset iPhone, hold down both the Home button and the Lock button until you the screen goes dark and the Apple logo appears.
This should solve your problem.
 Austin

Problem in self service after upgrade to 10G

Hi all,
My customer has upgraded recently to 10G database and running on 11.5.10.2 application.
I have procedure in the custom package in the database accessed through the mod_plsql. After some time it's working, the server start replying with web page cannot be found, but the procedure in the package exists and its valid!
Tried to Enable Logging for the PL/SQL Gateway according to "Metalink Note:116715.1". I got the following error messages:
"SIGNATURE (parameter names) MISMATCH VARIABLES IN FORM NOT IN PROCEDURE:"
Any solution?
Thanks,
Kumar

First of all, it is wrong queue for APPS related query , you would have post this question to "e-Business Suite" -> "Applications Technology" -> "Application Maintenance" , you would have got lots of reply till now.
Have you applied interoperability patch after 10g upgrade ?
Cheer,
Virag

Run Time Error of PDK dotnet service after upgrading to SP17

Hi All,
I upgraded the portal from SP15 to SP17.
Now, all my PDK.NET applications don't run.
I get the following error:
<i>
iView cannot display.
Could not connect to the .NET runtime server.
Contact your administrator if the problem persists.
Possible reasons:
1. The Portal Runtime for .NET service is not running or installed.
2. The .NET Runtime Servers Configuration property of 'iViewProcessorService' service is not correct. Check the syntax of server nodes, hosts and ports settings.
</i>
The service (ver. 2) is running in the server.
The configuration hasn't been changed.
The 2 sda (services):
com.sap.portal.dotnet.framework.sda & com.sap.portal.dotnet.services.systems.sda were upgraded to SP17.
The .NET runtime service's version is 2.0.
Do I need to upgrade it to 2.5?
how do I check that the Portal Runtime for .NET component and the two portal services version are the same?
Thanks,
Omri

Hi Rima,
Will the following configuration work?
New SDA files (SP17)
DOT NET runtime service 2.5
<b>Visual Studio Add-in 2003</b>
I don't use VS2005 but I don't want to 'clean' new sda files and install old ones because I'll have to do it on each SP installation.
Omri

Weak Signal or No Service after upgrading firmware 1.1.2

I live in Los Angeles, Hollywood area, and for the past 2 months have had nothing but headaches with weak signal strength, no signal, dropped calls and slow data service. Sometimes the phone will have 5 bars then go down to zero bars or no signal without even moving! I think it must be the iphone/at&t service/software, since my friends on standard phones with AT&T seem to not have these issues.. I have seen on other message boards that other iPhone users around the country are experiencing similar issues...
No one seems to answer my question, "Could this problem be related to the Edge/3G combination have anything to do with this problem? The first 5 months of using the Iphone, I only noticed slight weak signal problems, generally related to having the wifi radio on. But this problem is occurring with wifi off. I have Reset the Phone, restored the phone, re-seated the SIM card, check to ensure SIM show no physical damage, all to no avail. You folks need to give me some real answers, and not just the standard we don't know. Now I must add there are some places like 6700 Hollywood Bl. where the signal is great both Voice and Data, but a 1700 N. Las Palmas the signal drops off to one bar, and at 1737 N. Las Palmas Av. it goes to No Service. Please help Please help!

You folks need to give me some real answers, and not just the standard we don't know.
Firstly, "we" folks here are iPhone users, just like yourself, not Apple employees (though there are a few who sometimes post here of their own volition, and not because they have to). So your problem will be answered or advised on depending on our own experiences with the iPhone. To that point, I am in the UK, and am one of those people who have suffered from exactly the same problem as you: my iPhone gets very poor reception in areas where other 02 (UK network) phones get near perfect reception. There is a rather long thread on this topic, and another similar one which was started when the original was locked by the mods. I'm afraid that after much troubleshooting, we are still no closer to finding the source of the problem. What seems pretty clear is that the iPhone antenna probably isn't as sensitive as those of other phones. Also, it's on the bottom of the phone, so can be covered with your hand causing a drop in signal strength. It may also be that in an attempt to conserve battery life, the iPhone doesn't boost the signal as much as it should. But there are all speculations at the moment.
You best best is to communicate your feedback directly to Apple at:
http://www.apple.com/feedback/iphone.html
I'm sorry not to be of more help. If you'd like to look at the other UK threads, they are at:
http://discussions.apple.com/thread.jspa?messageID=5943821&#5943821
and
http://discussions.apple.com/thread.jspa?messageID=6306981&#6306981
Message was edited by: jia10

Error deploying Web Service after upgrading from WL 7.0 No Service Pack to SP5

Hello
I have problem using HttpServletResposneWrapper with a ServletFilter in WLW
7.0 SP5. When I apply the filter to JWS file in Development Mode, following
Exception is thrown when I access a JWS.
===================================================================
java.lang.ClassCastException: servlet.MyServletResponse
at weblogic.knex.dispatcher.HttpRequest.getRequestURL(HttpRequest.java:233)
at weblogic.knex.dispatcher.HttpRequest.(HttpRequest.java:51)
at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:291)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1094)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:437)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at servlet.MyFilter.doFilter(MyFilter.java:25)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5632)
at
weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:685)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3213)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2555)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:251)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:219)
===================================================================
I have looked at "weblogic.knex.dispatcher.HttpRequest" class. It seems like
this class tries to cast the response object to "ServletResponseImpl" class,
so ClassCastException is thrown.
Is there any workaround for this issue, since my code is compliance with
J2EE standard. Thank you very much in advanced.
Regards,
Tinnapat C.
PS. These are my codes.
=====================================================================
package servlet;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpServletResponseWrapper;
public class MyServletResponse extends HttpServletResponseWrapper {
public MyServletResponse(HttpServletResponse response) {
super(response);
=====================================================================
package servlet;
import java.io.IOException;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.http.HttpServletResponse;
public class MyFilter implements Filter {
private FilterConfig config;
public void init(FilterConfig config) {
System.out.println("Filter.init");
this.config = config;
public void doFilter(ServletRequest request, ServletResponse response,
FilterChain chain) throws ServletException, IOException {
System.out.println("Filter.doFilter");
ServletResponse wrappedResponse = new
MyServletResponse((HttpServletResponse)response);
chain.doFilter(request, wrappedResponse);
public void destroy() {
System.out.println("Filter.destroy");
=====================================================================
<filter>
<filter-name>MyFilter</filter-name>
<filter-class>servlet.MyFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>MyFilter</filter-name>
<url-pattern>*.jws</url-pattern>
</filter-mapping>
=====================================================================

Hello
I have problem using HttpServletResposneWrapper with a ServletFilter in WLW
7.0 SP5. When I apply the filter to JWS file in Development Mode, following
Exception is thrown when I access a JWS.
===================================================================
java.lang.ClassCastException: servlet.MyServletResponse
at weblogic.knex.dispatcher.HttpRequest.getRequestURL(HttpRequest.java:233)
at weblogic.knex.dispatcher.HttpRequest.(HttpRequest.java:51)
at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:291)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1094)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:437)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at servlet.MyFilter.doFilter(MyFilter.java:25)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5632)
at
weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:685)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3213)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2555)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:251)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:219)
===================================================================
I have looked at "weblogic.knex.dispatcher.HttpRequest" class. It seems like
this class tries to cast the response object to "ServletResponseImpl" class,
so ClassCastException is thrown.
Is there any workaround for this issue, since my code is compliance with
J2EE standard. Thank you very much in advanced.
Regards,
Tinnapat C.
PS. These are my codes.
=====================================================================
package servlet;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpServletResponseWrapper;
public class MyServletResponse extends HttpServletResponseWrapper {
public MyServletResponse(HttpServletResponse response) {
super(response);
=====================================================================
package servlet;
import java.io.IOException;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.http.HttpServletResponse;
public class MyFilter implements Filter {
private FilterConfig config;
public void init(FilterConfig config) {
System.out.println("Filter.init");
this.config = config;
public void doFilter(ServletRequest request, ServletResponse response,
FilterChain chain) throws ServletException, IOException {
System.out.println("Filter.doFilter");
ServletResponse wrappedResponse = new
MyServletResponse((HttpServletResponse)response);
chain.doFilter(request, wrappedResponse);
public void destroy() {
System.out.println("Filter.destroy");
=====================================================================
<filter>
<filter-name>MyFilter</filter-name>
<filter-class>servlet.MyFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>MyFilter</filter-name>
<url-pattern>*.jws</url-pattern>
</filter-mapping>
=====================================================================

Ios 7.1 no service after upgrade

Similar Messages

Maybe you are looking for