IOS 7.1 Problem with People Hearing Me

I purchsed my IPhone 5S in December 2013 and never had a problem with people hearing me talk when I called them until I downloaded IOS 7.1.  My voice was very faint or you could not hear me at all.  I found out through another discussion group that the update may have turned my noise cancellation to off.  I checked it out and swtiched it back on and the problem went away and people coud hear me talk again.

Hello All again,
I have found a fix for others that may experience the same issue.  The root of my problem appeared to be caused by Bookmarks that were created from Dropped Pins.  I use Dropped Pins to Bookmark mostly everything here in Korea because the addresses here are a bit confusing.  It appears Apple has updated some Map Data (I could be wrong), and my Bookmarks from Dropped Pins had incorrect addresses.  This of course is just my best guess.  Bellow is what I did to fix my problem:
I went through each of my Bookmarks one at a time and clicked on them.  Instead of clicking on the Car Symbol for directions, I dropped a new Pin right next to the old Bookmark.  I then created a new Bookmark from the Dropped Pin and labeled it the same, but with the number 2 so I could determine old from new.  After clearing Maps and selecting the new Bookmark, I could then click on the Car Symbol and it would route the directions just fine.  After verifying the new Bookmark worked properly, I deleted the old Bookmark.  Rinse and repeat for all of my Bookmarks, re-ordered them and now its as if I never had a problem in the first place.  Tedious work, but managed to solve my problem.  I hope this helps for anyone else that may have the same problem.
Have a good day.

Similar Messages

  • Problems with people hearing me on GE 31591 cordle...

    Hello,
    We have been using the GE 31591 cordless telephone to make all our Skype calls but over the last few months, the quality of the calls has got worse.  People on the receiving end are finding it hard to hear us.  Sometimes the lines is crackley and sometimes it fads in and out.  
    Today after trying to talk to Skype on a number of occasions (I was transferred to the wrong department 4 times) without checking anything they told me rather abrutly to check with the manufacture directly.
    I wasn't sure if the problem is with the line or with the handset.  Does anyone have any advice?  If not I will have to buy a new cheap phone to test the system.
    Kind regards
    Kathie

    Hi, Kathie,
    I referred your enquiry to Skype's partner vendor for assistance.
    Best regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Problem with people hearing me

    Been having this problem, but I am on an iPhone 6.
    [Branched from an earlier discussion]

    Explain?  What is happening (or not happening)?

  • Problem with People Picker field in sharepoint 2013 list

    hi friends
    i have a problem with people picker
    default newitem.aspx
      custom NewItem.aspx
    why the selection option of the people piker is changing
    how can i get the default functionality in custom page
    please help me

    Hello malli.share,
    try to copy source code from newitem.aspx to custom_newitem.aspx (in SPD you can edit custom_newitem.aspx in advanced mode and paste the code).
    Regards,
    Alexander

  • Problem with people opening my PDF Form

    Hi,
    I have people who can't open my Form PDF file - they get an error message. Some of them have version 5, 6 or 7 of Acrobat.
    Any suggestions? I have enabled Usage Rights in Acrobat and Saved.

    Hi,
    you can inform your clients with a message when opening your form with an (too) old pdf reader version, to avoid problems with using the form.
    put following script into the initialize event of the first page of your form!
    if (typeof(app.viewerVersion) != "undefined")
    if (app.viewerVersion < 8.0)
    app.alert({cMsg:"ATTENTION:\rThis file requires Adobe Reader 8.0 or newer!",cTitle: "ATTENTION:", nIcon: 1, nType: 0} )

  • A lot of bug in ios 7 and problem with the iphone

    There is a problem with ios 7 when I delete history with my iphone 4s ...and only one month after that I've buy my iphone appared a problem with the wi-fi!!!!!!

    Try https://discussions.apple.com/message/23175298#23175298
    Allan

  • IOS 5.0 - Problems with the feature "Mail"

    Gentleman,
    I installed the new iOS 5.0 and suddenly two problems appeared in my "mail" featured. I have a google mail count in my iPhone:
    - Appeared 2 Inboxs for the same mail, and both inbosx received the same messages. I could not delete this second mail box.
    - The messages in my Inbox does not show "from", just "to" and I can not put the message to "unread" or change anything. The most strange that the messages that I received become messages that I can send to others.
    I tried to restart the mail in the configuration, I tried to restart all the iPhone to return to factory configuration and the software return to iOS 5.0 and with the same problem.
    Anyone have the same problem? Any toughts?
    Thanks for your kindly attention
    Gabriel Aleixo

    Im having the same issue. It didnt happen right after the update. I updated at 1pm and it happened at 9pm. My memory is still there for them when i plug it into iTunes but the memory is now under "other" instead of apps.

  • Connection and SMS Problem with Peoples/China Moblie (HK) using  iPhone4s

    I just signed up with Peoples/China Mobile (HK) service provider for apparently 2.5G service.
    I face the following problems which the technical support of the service provider is unable to resolve and providing me any proper feedback:
    1) SMS / messaging not working.
    - Outgoing SMS all failed.
    - Incoming SMS no issue.
    2) Unstable and bad connection.
    - No service in MTR.
    - Upon coming out from the MTR station or location with no reception/elevator, the search for network is slow and service unattainable. The "No Service" sign on the top left screen remain as it is. You have to either restart the phone and force network search again. Very irritating and fustrating.
    - Network search subsequent to above incidents are very long (5 minutes at least)
    3) Regular service failure for basic phone calls
    - Very unstable throughout the days.
    Even the basic phone calls and SMS is  far worse than my previous service plan. I cant even make/receive proper phone calls. SMS/messaging not working at all!!!!
    So what is the root cause?
    Iphone 4s glitch or bug? Should I send back to Apple?
    or
    Problem lies with the Service provider's connection (peoples/china mobile) ? Incompatible phone set versus 2,5G service provider?
    Ah Huat
    Fustrated customer!!

    Your issue is more than likely bandwidth related although there is a lot of variables that can cause issues. You can use the free Speed Test app to test your network speed using your iPhone when the problem arises. This could tell you which end the issue is at. It may be anything from older slower wifi routers, slow Internet connection, which your provider may throttle for certain uses, or network congestion in  your area especially if you use cable Internet.

  • IOS 5.1 Problem with docking.

    I've recently upgraded to ios 5.1, and have generally been happy with it. i haven't encountered the battery problems a lot of people have complained about but i have had one HUGE problem. I have an alarm clock docking station i use to charge my Iphone 4 with, i can dock my iphone and play music through the speakers no problem, it works the same as it always has, i can control all aspects using the remote control and everything but volume using my device. When docked and playing music the volume slider disappears from the music app, this is fine as it always has done this. The problem however is that once i remove the device from the docking station and try and play music through headphones or the device's speakers the volume slider has not reappeared and although the device thinks it is playing a track no sound is made. Can anyone help?

    I have the exact same issue, also with 4S when I updated to 5.1. The only workaround (not a solution) is to turn off 3G. Make sure to check the setting again after you restart your phone as it turns back on by default.

  • Is anyone having trouble with people hearing them when they answer the 4s?

    When I answer my 4s the other person has a hard time hearing me. Just wondering if there is something wrong with my phone or if others are having the same problem.

    I had this happen to me a few times. I assume it was some kind of software glitch, since restoring the phone fixed it for me.

  • IOS 6.1 problem with the phone not ringing

    Anyone having a problem after updating to IOS 6.1 on their iPhone 4s. The phone no longer rings when a call comes in. I tried restarting the phone which I have seen on a few post on the Internet but that did not correct the issues. My wife and I both have an iPhone 4s 32gb with Verizon and we both ran the update last night. My phone was a little slow so I restarted the phone and that seemed to resolve the issue. However on my wife's phone it will not ring. You call the number and you can see the call coming in but the phone will not ring. We have tried restarting the phone with no success. Has anyone else had this issue and what did you do to resolve.
    PS: I am also one of the Administrators for the Messaging team and I have had several of my users with iPhones call me regarding the same issue. Looking for a solution for myself and others.

        ironbulance,
    We definitely need to get to the bottom of this. Receiving calls, and being aware of them is totally important. Is it with every call? Did you check Alert Settings to ensure you have it set to Ring?
    There is a Setting called Interruptions; this may interfere with all notifications when an App is open. It's in Sound and Notification.
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • IOS 8 battery problem with iphone 4s

    I installed IOS 8 over the weekend on my iphone 4S.  My phone is completely dead because of the battery drain to fast.   for example it was 100% fully charged, left alone for 20 min later (without using it), the power went down to 72% .  or went to bed power at 85%, the phone went dead next morning.  another occasion: left the house at 65% power,  it went dead after 2 hrs WITHOUT A SINGLE USE.  I went to the Setting so many times to see anything that unusual, I turned of: Background App Refresh,  Turned off Location Services (each App too), etc..  I done everything I can, still the battery draining too fast.   Apple what have you done, this is causing so much grief !!!!  I need help !!!!    another problem,  when I am in an App ( i.e.  CNN)  to see the news with video.   I see the video, but no VOLUME.  looks like the volume button is disabled nothing there.     

    This sounds as if an app keeps running in the background although you don't use it or allowed it to use it in the background.
    Did you already check Battery usage to see which app you didn't use much (or not at all) causes a major use in battery. See also this article and this one on iMore.
    I've seen others who had background process off for e.g. Google Hangout and Skype but still had major battery usage since iOS8.
    Please look also into the apps who are allowed to use 'Background refresh' and 'Push Notifications'.
    I've had similar issues with another Dutch app called Scoupy after 6>iOS7 upgrade. I deleted the app and it resolved the battery drain. The app released an update (months later) which resolved the drain finally. It was however very hard in the previous versions to find out the app which caused the drain. In iOS8 that is much easier now.

  • Problem with People/Person in Photoshop Organizer 11

    I had this tag yesterday - now the places, events, other categories show, but the People one now has a little house tag - not the colored tag that the others do, and my persons are gone (they are still with the pictures, but I can't add or change them).

    Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop Elements forum, where you'll get more specialized help.

  • Problems with People Recognition in PSE 9 that were not in PSE 8.

    Hello, I recently downloaded PSE 9 Trial Version and imported a PSE 8 Backup into PSE 9.  It took quiet some time but it eventually converted the library to suit PSE 9.  I have noticed a couple of small things that I find very irritating and that seem to be a step backwards.  Firstly, when I am in people recognition mode, not all of the names auto complete when I type in the first 3 or 4 letters of the name like they used to in PSE 8, even though the people are in my people list.  This might not seem like a huge problem, but I have 100's of people in my catalog and if I do not spell the name exactly as I typed it before, I will create a second instance of the same person.  Secondly, when a bunch of faces come up in the "Name these people" Screen, I used to be able to hold down Shift or Ctrl key and select multiple people to name at once, PSE 9 wont let me do this, I have to name them one by one, even if they are the same person.  I'm sure this is just a small issue that Adobe will get around to, but it is a huge turn off from PSE 9.

    So it sounds like PsE is installed correctly if new people tags work correctly.
    I have seen another issue that might be related.  You can manually create a people tag by adding it to the people category.  As long as this tag exist in the 'root' people category, people recognition seems to work correctly.  You can also have people recognition create a tag during the people recognition process.  These are two different tag types if you look inside the database.  And they behave differently.  For example, you can merge tags which have been manually created whereas this functionaliy is not possible for tags created through people recongition.  (By the way, I would not recommend merging the manual tags because you will run into issues when PsE finds a face on a merged and deleted tag).
    Once a face has been tagged to a manual people tag, the tag can be moved into a sub-category.
    I don't know if tags created in PsE 8 are considered to be manual or not in PsE 9 but this may explain some things
    Have you tried to move the people tags to the root people category and see if the functionaly works as expected?
    I can't help you beyond this -- you have exhausted my people recognition skills.

  • IOS 6 update, problems with connecting to MacBook

    After installing the ios 6 update for my iphone 4 i tried syncing my phone with my macbook. I learned that i needed the newest itunes (10.7) to do so. I tried downloading the new itunes but learn that i need the new Mountain lion software for my macbook as well to do so, not that big of a deal for me but i'm not sure if I can even install Mountain Lion on my macbook because of its age (bought in early 2008). I am currently running OSX 10.5.8.
    So really two questions...
    Can I even install Mountain Lion on my macbook?
    If I can't install the new macbook software can i revert my iphone 4 back to its original software, or another version, so it will still work with my current version of itunes (10.5)? I could stand loosing the updates i got with the IOS 6 software if it meant being able to connect my phone to my computer again.

    If you hold down the option key and, under the Apple menu, select "System Information"->"Network">"Wi-Fi" do you see that an AirPort card is installed? If not, your card may be dead or it may have been jostled loose.
    Call back,
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Maybe you are looking for

  • SAX Parser

    I am using the sax parser provided by the package javax.xml.parsers to parse an XML file. It works fine as long as I have an XML file which has English characters. When I use it for parsing a file which has Korean characters in it, the parser fails t

  • External DB [SecurID.dll]: Failed to load 'aceclnt.dll'

    Hi all, ACS refuse to start, possibly after windows 2000 upgrade. The error message in the csauth log is : ADMN 05/05/2006 08:42:11 E 0360 1824 External DB [SecurID.dll]: Failed to load 'aceclnt.dll' ADMN 05/05/2006 08:42:11 E 0547 1824 AuthenLoadLib

  • Lync 2013 Client install failure

    Hi We're having trouble installing the Lync 2013 standalone client via SCCM on a couple of PCs.  It is installing with no problem on most PCs.   However, on some PCs, it installs and when you launch it you get the message... "Microsoft Lync has stopp

  • Deadline Monitoring for N-Level Approval Workflow WS14000033

    Hi, We want to setup Deadline Monitoring i.e. emails to be sent to approvers (when Shopping Carts remain unapproved in their Inbox past 2 days or so). Does anyone have any configuration/procedure document on how to do this? Regards, Ashwani

  • Why do I get message that Flash player is in use and can't be installed even though I have uninstalled it?

    Using Windows7, attempting to install Flash Player version 17.0.0.134 I download the installer, specifically from the site for Firefox, and uninstall previous version and yet I get this message. Have tried several times to update and now to do new in