Ios 7.1 Update Issue. Camera Video not capturing Audio

Hello Every One, I have Updated ios 7.1 after the Update the Camera Video is not capturing the audio.Please help me with the SolutionIo

Hi Aniruuthan,
Thanks for visiting Apple Support Communities.
If your iPhone is not recording sound along with video, I recommend these troubleshooting steps:
Make sure nothing is plugged in to the jack connector.
Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
Make sure none of the microphones is obstructed by dirt or debris.
Turn the iPhone off and then on.
If necessary, find general iPhone hardware troubleshooting suggestions.
For further assistance, contact Apple Support.
You can find the article with these steps here:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Best Regards,
Jeremy

Similar Messages

Flash Media Live Encoder not capture audio device

Welcome, i have the problem with not capture audio device in Windows 8 32bit, i used the virtual audio cable
this is problem with registry?

if you dont like to turn off firewall settings, add 1935, 80 and 443 under exception. For this Choose firewire settings from Control Panel.

HT4623 After the iOS 7 update my camera does not operate correctly. It will take about 5 photos then it becomes very sensitive, moving between "video & square". I turn it off & back on, it work for a second or two & lockout again.

After updating my iPad my camera does not operate correctly. It will take about 5 photos then lockup. It also becomes very sensitive when I try to zoom in, it changes to "video or square". I have to turn off for awhile then it repeats the same malfunction, just lockup again.

After updating my iPad my camera does not operate correctly. It will take about 5 photos then lockup. It also becomes very sensitive when I try to zoom in, it changes to "video or square". I have to turn off for awhile then it repeats the same malfunction, just lockup again.

Can't contact software update server (iOS 5.1 update issue)

For some reason, I'm unable to update my IOS devices at home but able to do it somewhere else (Starbucks, McDonald's, friends' house). Is anyone else having this problem or knowswhat the issue is?

Could be a DNS problem. The DNS you use at homemight not have the Apple server entered correctly. See:
iOS 5 update issues "Network...: Apple Support Communities

IOS 5 Software Update Issue

After Iphone 3Gs update my Iphone asked me to activate , but Itunes can´t find simcard. Is it an issue you having after update?. Im concidering in sending Iphone to repair , even so I have not garanti time left , i feel so frustrated . But Apple should be now finding a solution. Dissapointed!!
Fix it now Apple!

Could be a DNS problem. The DNS you use at homemight not have the Apple server entered correctly. See:
iOS 5 update issues "Network...: Apple Support Communities

I have an iPhone 4S with iOS 7.0.2 rear camera does not work

My rear camera has not been working ever since I have updated. Should I visit the apple store or wait for 7.0.3?

WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

After updating Mavericks camera functions not working. Help!

HI! i just installed OS X Mavericks and now my camera is not working, neither in Skype neither in photo booth and so on... what can i do? thank you

After tesing in a new account, if the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
iSight - Troubleshoot

Telepresence client 4.8, No incoming video / Not receiving audio on a Mac - Windows is OK

Hi, I'm using the Jabber Telepresence client v4.8.8.18390 on a Mac - Yosemite 10.10.2
It used to work fine, but something has changed and now I can't receive video or audio. The call seems to initiate, local camera is in use, but then get the messages "no incoming video" and "not receiving audio", as shown in the attachment.
It works fine on my windows client, v4.8, so I know my account is fine, and i'm using the same settings to connect to the server - so this seems to be a local issue.
If i downgrade to v 4.4 then I can receive audio, but still no video, and 4.6 or 4.8 are both broken in the same way.
I think this may be something along the lines of conflicting / bad codecs installed on the mac - but can't find a way of tracking that down.
Any help would be hugely appreciated.
Thanks
Sam

Does your camera/audio/mic work with other software such as Skype or YouTube, etc? Are you sure this is a Jabber issue versus a PC problem?
Have you tried the newer 4.7 client?
I see Windows 8 is supported;
http://www.cisco.com/c/en/us/td/docs/telepresence/endpoint/Jabber_Video/4_7/CJAB_BK_C7A5C618_00_cisco-jabber-video-for-telepresence/CJAB_BK_C7A5C618_00_cisco-jabber-video-for-telepresence_chapter_01001.html

Known issue: Cortana does not play audio through the default playback device (Windows 10 Insider Preview SDK and tools, April 2015 release)

When getting audio feedback from Cortana on a device with multiple playback endpoints (e.g., a device with a headset and an internal speaker), the playback may occur on the incorrect device. For example, Cortana may not send audio to the default device
after the default has been changed in the control panel.

There is no workaround for this issue.

Adobe Premiere Pro cc not captured Audio but throgh BMD Card out to external Monitor

Windows 7 Ultimate and Blackmajic Studeo 2 card Adobe Premier Pro cc7.2 my Video capture (Analog) through card but Audio not captured but also external out video and audio perfectly Through Blackmajic Decklink studeo card with desktop video 9.8 software.pl.assit me. Thanks.

Hi,
we have the same problem!
It is not possible to play audio with the AVC-Intra100 Codec fluently.
Can anybody help?
Thanks,
Anja

Help, I can not capture Audio Pinnacle to a flash media player encoder 2.5

Help Please ...... As you can do to capture in Adobe Flash
Media Encoder 2.5 audio moviebox A Pinnacle Studio Plus, since only
TE Tom THE video, but does not capture the audio, and therefore I
have a delay in the video against Audi. Do I configure Encoder
2.5.

Here is the fix:
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=29191

IOS 8.2 update issues with camera on iPhone 5s

Hi everyone, after updating my iPhone 5s to IOS 8.2 i have issues with camera. When i open it everything seems fine, but then when i take a picture, i can not access my gallery for the lower left corner nor i can find any picture saved in my gallery. I have to say that i have enough available storage space. But for some reason not even one photo is there since i have updated my phone.
thanks in advance for any suggestions on how to solve this problem.
ivy

Dolphster wrote:
How about this.... now that I've update to iOS 8.2, I can not log into the itunes store on my iphone/ipad and also macbook pro. urgh.
As your problem is completely different than the original post, it would be both more effective and more polite to start your own thread with a properly descriptive subject line.
Best of luck.

IOS 5.1 Update Issue: Contacts exist, but do not appear with incoming call or text

Alrighty; I just purchased the iPhone 4s and last night was prompted to upgrade to IOS 5.1. After doing so, I noticed today any incoming calls from one of my contacts would not display the name (the number was displayed as if it was an unknown call). However, text messages displayed contact information. I was playing around with it and based on suggestions elsewhere I added a '1' before some numbers. Upon doing this, an incoming call would display the name of the caller but incoming texts would not. A call to support directed me to call Verizon (my carrier) for 'some sort of three digit code' which would correct the issue; alas, Verizon had no clue. I'm at a loss and any help or suggestions would be greatly appreciated!

Is this forum only for the US? Maybe I'm intruding here by posting this?
Not only the Verizon version unfortunately. We have the same problem here in some parts of the Middle East. I have heard reports from Kuwait and Bahrain, and I'm located in Oman and the problem exists here as well. And no solution except downgrading the phone back to iOS 4.3.5.

IOS 7.1 update issue with Touch ID sensor

After updating to iOS 7.1, Touch ID not working. When i try to enroll new finger, the scan wizard appears but thereafter nothing happens.
Tried Resetting iPhone. No FIX.

Hi Aniruuthan,
Thanks for visiting Apple Support Communities.
If your iPhone is not recording sound along with video, I recommend these troubleshooting steps:
Make sure nothing is plugged in to the jack connector.
Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
Make sure none of the microphones is obstructed by dirt or debris.
Turn the iPhone off and then on.
If necessary, find general iPhone hardware troubleshooting suggestions.
For further assistance, contact Apple Support.
You can find the article with these steps here:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Best Regards,
Jeremy

IOS 8 Stuck photo in camera thumbnail not in Recently added

Since iOS 8.0, sometimes a photo gets stuck in the thumbnail square at the lower left corner of the camera window. If I touch that photo, I get a message saying that there are no photos or videos. The photo does not get into the Recently Added album.
If I take more pictures, they are shown in the square. But if I delete them all until the Recently Added album is empty, the original stuck photo appears again in the square. This thumbnail should be a gray square when the Recently Added album is empty.
The only way that I've found to fix it is to browse the phone with iExplorer, delete the folder PhotoData and DCIM and resync with iTunes.
But the problem may arise again at any time. It seems that it appears when taking several photos in a row, mainly without flash.
It didn't happen under any iteration of iOS 7, but it's been there under 8.0 and 8.0.2.

I Had this problem as well and the photo it was displaying was an inappropriate one I wouldn't want anyone to see so it was a big deal for me to fix this. I didn't have this photo in my camera roll or in any of my folders but I DID find it in my collections screen under the Photo app. Once I deleted it from collections it disappeared and displayed the most recent photo that is in my camera roll. If you want to keep you picture share it someone private and delete the old copy and save the new one and see if it lets you keep the photo without having the thumbnail issue.
hope this works for you.

Ios 7.1 Update Issue. Camera Video not capturing Audio

Similar Messages

Maybe you are looking for