IOS 7 & Bluetooth Streaming Issues (CD Skipping Effect)

Ever since IOS & came out, my iphone 4 has a CD skipping sound to it when I stream music from my music library or any audio app. At first I thought it was my Kenwood radio but I updated it and it was still there. Next I tried to stream on my friend Parrot Bluetooth hands free device. Same thing.
Whenever a text comes through or I unlock the phone and even navigate through the phone it will do it. If the phone is locked then it wont do it. I have to turn off the phone and reboot it and then all is well for the next day or 2 before it comes back.
I tried searching everywhere and no results. It is a really annoying thing that needs to get fixed. I was hoping in each update that the problem would go away. IOS 6 never had this problem.
Any Suggestions?

Seriously...no one else has this same issue?
Does this mean I really have to upgrade to a new phone because Apple just cant leave well enough alone?
I really wish they would not have allowed iPhone 4's to be upgraded to iOS 7. iOS 6 was the best for these phones as far as I am concerned.

Similar Messages

IS07 Car Music Bluetooth Streaming Issue - Help Needed

I drive an Audi A1 which I have owned from new 11 months ago. I updated my iPhone 5 to the IS 7.0.4 around 1 month ago and since doing that I now have streaming issues in my car. The connection is via bluetooth, and the music is streamed from my iPhone, however since the update the music cuts out, skips and pauses............
I took the car to a service centre today where it was confirmed a known issue within the Audi network.
So how do we go around this? What do I need in order to stream music without the interference? I am pretty sure Apple wouldn't want to pay my car invoice for the added extras that I purchased in order for me to enjoy my music so surely there must be a way around this?
Any advice is greatly appreciated.
Thanks,

This is not about law, it's about software/hardware. But since you're bringing it up, when Siri was introduced for the iPhone 4s, there was a man in a car using siri with his apple earplugs. I searched for law about this in my country (Netherlands) and it's not forbidden.
Now back to my issue: I want to use a headphone to listen to music and I want to make a call through bluetooth. Iphone doesn't remember I was listening to the music through the headphone. Issue, right?

Bluetooth streaming issues iOS 8.1.2

I have been seeing issues with Bluetooth audio streaming on my iPhone 5c, when connected to Harman/Kardon Soundsticks III BT.
Initially I thought it was an issue with the speakers, but changed my mind when my friend's Nexus 4 was able to stream audio properly.
I do not face any issues with pairing or connection. But the audio playback will stop suddenly, even though I can see the progress bar and timer on my iPhone.
And sometimes, I hear a continuous buzzing sound from the speakers, after audio playback stopped.
Today I also saw issues with connecting to my Nokia BH-104 headset. I can see Bluetooth got connected, but music simply does not stream to the headset. When I try playing, music is played over phone speakers, not the headset. I tried using the headset with my Lenovo laptop, and its working fine.
Tried resetting phone, even restored as new when i upgraded to iOS 8.1.2, but nothing has yet worked for me.
Anyone facing similar issues?
Device details -
iPhone 5c (16GB), 8.17 GB free
iOS 8.1.2

Hi What type of devices are you trying to connect? Cheers Brian

MacBook Pro bluetooth streaming issues

Hi There,
I recently purchased an Aluratek iStream, it is a device that turns a normal pair of speakers into bluetooth audio streaming capable ones. I connected my Late-2011 MBP to it and tried playing music and I quickly noticed that the audio quality significantly dropped and the line had a lot of static on it. So I tried pairing it with my iPhone 4S and played the same exact song and there was no static at all. Then I tried pairing it with my older MacBook (running Lion) and I had no static issues either. Also, I tried rebooting my MBP and the issue persisted.
Anyway, has anyone else had the same issue?
Jonathan

Same issue except there isnt crackling. Instead, the audio volume is about 50% lower when played from my macbook pro
Works fine on my HTC thunderbolt, Even works fine on my brothers Mac (same year and OS build).
My audio used to work fine through my bluetooth adapters but now the audio is way lower than it should be. This is a recent problem, it worked fine before. I believe an update may have cuased this, then again my brothers mac is working just fine even after the update. I even tried switching the bluetooth adapter and it still has the problem so I know its my Mac.
Please fix this issue...
Me and my brother Both have 2011 Macbook Pros, running 10.7.4 and the adapters are Blackberry adapters used to receive the audio from my mac and play through my home entertainment system via aux jack from the bluetooth adapter.

IOS Photo Streaming Issue

I have had photo stream set up between my phone and computer although since updating to the iOS 7 my photos no longer stream to my computer but are located in the album on my phone. Can anyone explain how to fix this?I

Thanks for the reply Tom
I'm on 4.4.
Interestingly, whilst leaving it running I just encountered a new problem, the screensaver was running perfectly, it then went over to a black screen with the music still running, hopefully that was a one-off.
I've been pointing Itunes to my 2011, 2010 and 2009 photo directories, one at a time, each has around 1000 photos. The problem was replicated every time, many of the photo's in those directories are 4 MBish JPEGs.
I'm going to point it to my 2005 directory which has 1.5MBish photos taken with my previous digital camera. I'll let you know how I get on.

Bluetooth Stereo Issues

I have tried the Sony Ericsson HBHDS980 and HBHDS205 both have drop call issues. Music works flawlessly, but whenever I receive a call or try to call someone, the connection always drop after a while. I have had the drop call issue with the HBHDS980 on other Win Mobile phones. I am just wondering if others have issues with stereo bluetooth head set. I have a blueant V1 which works flawlessly for calls but it's not stereo.

How do you mean car update? The head unit is aftermarket not built-in so the car itself does not have Bluetooth. It's worth noting (I forget whether I already did or not) that the Bluetooth streaming works perfectly with my iPhone 5 just not with the Sony. I'm now on my second Xperia Z2 as the first one's call quality was abysmal. While this one seems a **bleep** of a lot better this Bluetooth streaming issue is actually doing my head in and making me want to change phones completely.

Multiple Bluetooth Usage issues

I'm finding Stereo Bluetooth very unreliable and at some points rather irritating. My issues are related to playing music using iTunes to my car stereo.
Connection: (A) When I stop my car, iTunes does not detect that the Bluetooth link dropped. It keeps playing. (B) Whether I pause music before or after turning off the car, it never remembers where it left off. I always have to navigate back to the song. (C) Some of the time when I turn the car back on, it will not connect and begins playing music out of the built in speakers of the iPhone at the volume level remembered when I last had the 1/8" jack plugged in. (D) When it fails to connect there is no way to easily start a re-connection. My only discovered method thus far to force a reconnect is to turn off my car and turn it back on. Very annoying.
Streaming: I seem to have to power cycle the iPhone every time I want to use stereo Bluetooth. If I have run other applications, it seems like there are processes running that interrupt the bluetooth streaming causing the music to break up. It's like the Bluetooth process is at too low of a priority over other processes to work reliably.
I hope this is helpful information for the improvement of the Bluetooth stereo streaming function.
Jeff

Hi and Welcome to the Forums!
Regarding your item 2 (sorry, I've no idea about the other items), see this KB:
KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones
Substitute, in the KB, the appropriate instructions for your other device in place of the KB section for the sending device. Do not skip the "Receive Using BT" step on the receiving BB...nothing will transfer if you do.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Bluetooth connection issues after update

Is anyone experiencing bluetooth connection issues after upgrading to iOS 8.1.3? I upgraded to iOS 8.1.3 and now it won't connect to my car bluetooth and my bluetooth speaker will sound like it has static from time to time.

Hi, joshzik.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing issues with various Bluetooth devices and your iPhone. Sometimes pairing the devices again can resolve the issue. However, here are a couple articles that have some helpful troubleshooting steps regarding Bluetooth connectivity and an iOS device.
Get help using your iPhone, iPad, or iPod touch with your car stereo
http://support.apple.com/en-us/HT203412
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
-Jason H.

Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..

Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..

Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).
iPhone 4S, iOS 5.1.1, VW bluetooth

Hearing aid that does not need a separate bluetooth streaming device

hearing aid that does not need a separate bluetooth streaming device

I believe any "Made For iPhone" hearing aid. More information: http://www.apple.com/accessibility/ios/hearing-aids/
The bottom of that link has a list of "Compatible Devices"
Following is one:
http://www.starkey.com/hearing-aids/technologies/halo-wireless-hearing-aids

Serious resolution issues with After Effects CC (2014) on Windows 8.1 Pro on Dell Precision M3800 laptop??

My new company installed Adobe Creative Cloud (There was some annoying Proxy issues at first, because of the seriously tight I.T policies) but we are having some serious resolution issues with After Effects CC 2014 (also have this resolution problem with Adobe Premiere, Media Encoder, Muse) on Windows 8.1 Pro on a Dell Precision M3800 laptop with icons and interface looking too small and hard to see, is there a fix, an update or a work around, can anyone help?
Any help will be appreciated!
k.regards
Ramon

Hi Todd is there a time-frame for this fix, there is a lot of pressure on me, because I convinced my company to get the Creative Cloud and quite a lot of the CC software is not compatible with the latest Windows 8.1 OS.
Is there at least a work around, until this big fix comes along?
k.regards
Ramon

Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now. Any ideas at all how to fix it?

Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now. Any ideas at all how to fix it?

So, don't use youtube.
http://www.the-top-tens.com/lists/best-alternatives-youtube.asp
http://www.youtubealternative.com/

Zen Style M300 Bluetooth Streaming Problems

+~Hi
I've got a new 8gb Zen Style M300 player which I've upgraded with the latest .00.6e firmware.
I have been able to pair to a blueTooth headset (Nokia BH24 http://europe.nokia.com/find-product...s#Connectivity?) and it will connect every time.
However the streaming is choppy (something like 0 pulses per second) so the BT is unuseable - I've turned off my wifi etc in the house in case this was interfering, but that didn't help
Has anyone managed successfull BT streaming...
This headset supports the following standards:
Bluetooth version:
2. with enhanced data rate (EDR)
Bluetooth profiles:
Handsfree profile (HFP) .5
Headset profile (HSP) .
Advanced Audio Distribution Profile (A2DP) .2
Audio/Video Remote Control Profile (AVRCP) .0.

/Re: Zen Style M300 Bluetooth Streaming ProblemsIHi KokChoy
Proximity & different headphones don't seem to help, and the included audio-book shows the same problem...
However some good news : the M300 streams OK to a friend's Jawbone Jambox speakers so it'slooks like the BT on the M300 does meet some of the BT standards.
My Samsung Q330 Laptop streams OK to the Nokia BH24 headset, which shows that this device?is not faulty.
It just looks like that the BT streaming from the M300 somehow?doesn't match the BT of the BH24
Specs for the jambox are these, which appear to be the same as the BH24 on my st post - strange
http://www.jawbone.com/speakers/jambox/specs
Bluetooth
Wireless Range: at least 33 feet<
Bluetoothv2. compliant<
Supports Enhanced Data Rate (EDR)<
Profiles Supported: Advanced Audio Distribution Profile (A2DP) .2, Hands-Free Profile (HFP) .5, Headset Profile (HSP) .<
<

ITunes 10.6/Quicktime 7 1080p playback issue/frame skipping

I have a playback issue with the 1080p videos on the recent version of iTunes - 10.6. I also tried playing the same videos on Quicktime where I was able to find that the videos were playing at around 20fps as opposed to their normal rate - 24fps~25fps.
I seem to barely meet the 1080p playback requirements on iTunes, but I know that I'm able to watch 1080p videos on Window Media Player(WMP) 12 without any issues. Aside from WMP, I'm able to watch 1080p videos on Youtube whenever hardware acceleration is enabled. I assume that WMP utilizes hardware acceleration as well.
The playback issue/frame skipping is probably caused by iTunes 10.6 not using hardware acceleration.
Windows Hardware
PC with a 1GHz Intel or AMD processor and 512MB of RAM
To play Standard Definition video from the iTunes Store, an Intel Pentium D or faster processor, 512MB of RAM, and a DirectX 9.0-compatible video card is required
To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor, 1GB of RAM, and an Intel GMA X3000, ATI Radeon X1300, or NVIDIA GeForce 6150 or better is required
To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor, 2GB of RAM, and an Intel GMA X4500HD; ATI Radeon HD 2400; Nvidia GeForce 8300 GS or better is required
Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
16-bit sound card and speakers
Broadband Internet connection to use the iTunes Store
iTunes-compatible CD or DVD recorder to create audio CDs, MP3 CDs, or back-up CDs or DVDs
My PC specs:
Pentium Dual Core 2.3 Ghz
2GB DDR3
Intel GMA X4500MHD

Bump! Sounds the same as my problem, but maybe no one but us are having the issue since no one will answer any of my posts

I have an issue using Lighting Effects in Adobe Photoshop CC 2014

Hello everyone,
I am having issues using Lighting Effects in Adobe Photoshop CC 2014. I created a duplicate layer that I want to do the effects on, converted it to a smart object and on that same layer went to Filter>Render>Lighting Effects to get to the Lighting Effects screen. When adjusting the parameters (drag/reshape the lights) for either the spotlight or point light, I don't see any changes. Can someone tell me what could be the issue or if I'm doing the steps wrong to apply the effects?
Here are my specs:
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Processor: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz (8 CPUs), ~2.8GHz
Memory: 8192MB RAM
Available OS Memory: 8174MB RAM
Card name: AMD Radeon HD 6570
Manufacturer: ATI Technologies Inc.
Display Memory: 743 MB
Dedicated Memory: 1008 MB
Shared Memory: 3831 MB

I am experiencing flickering issues as well. However my issues are with the Fast Color Corrector and the Three Way Color Corrector. It seems as if the color correction tools are causing intermittent flickering on some people's systems.
Additionally when I converted some old PPCC 7.2.2 projects which had the Three Way Color Corrector applied, some clips in sequences would come up as a green screen in the program monitor. If I turned the TWCC off the footage would display correctly in the program window. If I turn the TWCC back on it would display the green screen again.
I haven't found a solution to the flickering but to solve the green screen issue I have to remove the effect, then re apply it. I guess for whatever reason, the 2014 version of PP has issues with 7.2.2 projects where the TWCC was applied.
I'm hoping Adobe will address this soon with an update for the various bugs that have been reported.
PPCC 2014 8.0.1
Win 7 Pro

IOS 7 & Bluetooth Streaming Issues (CD Skipping Effect)

Similar Messages

Maybe you are looking for