Ios 7 crashing problem

I just updated my ipad min from ios 6.1.3 to 7.0 to 7.1.0. Im so upset that my ipad keeps crashing everytime I open my apps, or even when Im on the home screen.
I use my ipad daily at work, so upsetting that I cant even use it now, because it's so frustrating seeing it crash everytime i use it.
Is Apple doing anything with this problem? An ios update for this problem? It's just so upsetting...

Try a Restart. 
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
 Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
Here is a link to their contacts with most of the information below. 
http://www.apple.com/contact/

Similar Messages

  • Safari Crash - Problem with doodle (planer) app  -  doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings!

    Safari Crash - Problem with doodle (planer) app  -  doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings! Works fine with an older Safari Version. Web link, call doodle app.  You could see the website in the backround working but safari crashes after clicking on the error window.   Any suggestions?

    Turn off Private Browsing.
    Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

  • Crash Problem with Adobe Photoshop CS3

    I have been using photoshop and getting the same problem many times. Many times the software gets off during the work. I alwats used to save my work in the end but due to the crash problem my dats gets lost. I am trying to get it recoverbut i think its not posibble to get your lost data back.
    If somebody have any best solution to this issue please let us know. Adobe must take care of this issue seriously.
    Thanks
    Team
    Bizz Duniya

    This is the InDesign forum. Photoshop is down the hall on the left.
    Bob

  • How do I fix a FINDER crash problem in 10.6.8

    I recently, in the last 10 days, started having a FINDER crash problem with my iMac 24" (iMac9,1) Intel Core 2 Duo 3.06 GHz computer.
    I have 4 GB of ram installed, no external hard disks installed.
    It seems to crash when I have five or more applications open, but it is not consistant.
    When it freezes or crashes, I get the spinning ball. I open the Force Quit Window with comand, option, escape and it show Finder not responding.
    I click on Finder and tell it to relaunch. It does nothing. At that point I cannot even go to the APPLE icon on the dock and do a shutdown or restart.
    From that point on, I have to press and hold the START button to shut the computer down.
    I have checked the hard disk integrity with Disk Utility after starting on the Snow Leopard 1.6 install disk. everything shows good.
    I have repaired permissions using the same application. I then restart the computer and log back in.
    I have used Onyx for Snow Leopard version 2.3.1 to do some maintenance routines.
    I have checked the S.M.A.R.T. status of the hard drive and it passes.
    I have verified that the Daily, Weekly, Monthly routines have been run. They have.
    I have executed the Cleaning tab to include the following cache files:
    System: Boot
                   International Preferences
                   QuickTime Components
                   Audio Components
                   Other Components
    User Cache: Applications
                             Prefernces of System Panels
                             Java & Applets Java
                             Desktop Background
                             International Preferences
                             Dock Icons
                             ColorSync
                             QuickLook
                             Temporary Items
    Internet Cache: Browser Cache
                                Download Cache
                                Browser History
                                Recent Searches
                                Web Page Previews
    Fonts Cache:  System and User
    Logs Cache: Log Files
                            System Archive Logs
                            User Diagnostic Reports
                            System Diagnostic Reports
                            Mobile Devices CrashReporter
    Misc. Cache: Recent Items
                            Recent conversion of Calculator
                            Obsolete Items
                            QuickTime Content Guide
    Under Maintenance Items:
    Rebuild:
                   LaunchServices
                   dyld's shared cache
    Short of taking this computer, packing it up, and hauling it down to the Apple Store for the 'Genius' to poke around in it, I am at a brick
    wall as to what to do next. (I am useing this same computer to enter this message).
    Here's hoping someone on the forum will have an answer.
    Douglas J. Parker
    P.S. Does APPLE Technicians ever read these discussion questions and interject their 'Expert' knowledge?

    /Library/Preferences is where you will find that file.
    #2 - yes

  • Another crash problem with Adobe Premiere Elements 4

    another crash question!  burned a dvd of project, saw something i needed to change as i watched the dvd, tried to get back into project, but crashed time and time again.  have tried any and all suggestions in the forum for other crash problems, but cannot fix.  can anyone help?  below is error message and my equipment.  using Windows Vista.  I want to go back to Windows XP, never had a problem.  thanks to anyone who has an idea.
    Problem event name:                   APPCRASH
    Application name:                       Adobe Premiere Elements.exe
    Application version:                     4.0.0.0
    DEll XPS 420
    Intel (R) core (TM)2
    Quad CPU Q9450 @ 2.66GHz
    4.0 GB
    32 bit
    Driver software:  ACPIx86 based PC
    Adapter ATI Radeon HD 3650

    I'm not sure what's up at this point, if doing a Save As and deleting your render files doesn't fix your glitch (and assuming you've got adequate, freshly defragmented room on your drives for the program to work).
    You can also try working through Adobe's troubleshooting steps:
    http://kb2.adobe.com/cps/514/cpsid_51427.html
    Renaming the presets folder can help. (The program will automatically make a new one when you next launch it):
    Windows XP:
    Documents and Settings/[username]/Application Data/ Adobe/Premiere Elements/8.0/MediaIO/Presets/OTHERS
    Documents and Settings/[username]/Application Data/ Adobe/Premiere Elements/8.0/Settings/Custom
        Windows Vista:
    Users/[Username]/AppData/Roaming/Adobe/Premiere Elements/8.0/SC/Presets

  • I created a new profile to fix a crashing problem and now I can't get my bookmarks.

    Creating the new profile has fixed my crashing problem and I copied the recommended files and folders from my old profile to my new one but I still can't get my bookmarks. What am I doing wrong?

    These can't get your data back, but will help in the future.
    These add-ons can be a great help by backing up and restoring Firefox
    '''[https://addons.mozilla.org/en-US/firefox/addon/febe/ FEBE (Firefox Environment Backup Extension)]''' {web link}
    FEBE allows you to quickly and easily backup your
    Firefox extensions, history, passwords, and more.
    In fact, it goes beyond just backing up -- It will actually rebuild
    your saved files individually into installable .xpi files.
    It will also make backup of files that you choose.
    '''[https://addons.mozilla.org/en-US/firefox/addon/opie/ OPIE]''' {web link}
    Import/Export extension preferences

  • I have an error msg:  Warning!! iOS Crash Report

    I just got this error msg.
    Warning!!  iOS Crash Report.   Due to a third party application in your phone, iOS is crashed.  Contact Support for an Immediate Fix.
    There is a 1-800 number noted.  Is this legit or this this a virus?  We have tried shutting down the ipad and re-setting but nothing seems to work.  This error message keeps popping up.  Anyone got any ideas?

    Please tell me that it has NEVER been jailbroke.  If it has never been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Premiere Elements 4.0, Crash problems when add trasition features

    Operate a VAIO VGN-AW11XU,which was purchased in Dec. 2008 and was loaded with Premiere Elements 4.0
    This is the most powerful multimedia VAIo, with all features installed like 4GB memory,Intel Centrino 2 processor T9600 (2.8 GHz),VISTA Ultimate, NVDIA 9600GT and dedicated GDDR3 Video Memory of 512 Mb.
    I keep on getting CRASH problems especially when I try to add transition to my video clips. The problem message details are :
    Problem Event Name: APPCRASH
    Application Name: Adobe Premiere Elements.exe
    Application Version: 4.0.0.0
    Application Timestamp: 46f98f81
    Fault Module Name: StackHash_06a9
    Fault Module Version: 6.0.6001.18000
    Fault Module Timestamp: 4791a7a6
    Exception Code: c0000374
    Exception Offset: 000b015d
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 1032
    Additional Information 1: 06a9
    Additional Information 2: bc3df167e4e07c2f973b80c7de9b1a5b
    Additional Information 3: a44f
    Additional Information 4: 2a1b05c4d7cdba5c95e750c734db17fa
    I have the latest QuickTime installed.
    The camcorder is the SONY Handycam HDR-SR12E which records on a 120GB hard disc.
    The video clips which were recorded with above camcorder, are ( SD )MPEG-2PS
    Your help will be highly appreciated.
    Thank you
    Ilias

    Μακάρι να μπορούσα να μιλήσω πολύ πράσινο, Ηλία! Αλλά θα χρησιμοποιείται μόνο το Google μεταφραστή! Εάν λειτουργεί, όμως, θα σας στείλουμε μια απάντηση στα αγγλικά και στα ελληνικά.
    I do not know about the SD recording format with that camcorder. I am sorry. But, if your Premiere Elements project is set up for AVCHD, you should be able to edit AVCHD with that computer.
    I do recommend optimizing Vista, however, so that you will get the best performance. Here's how to do it:
    Δεν ξέρω για την SD μορφή εγγραφής που με βιντεοκάμερα. Λυπάμαι. Αλλά, αν σας Premiere Elements έργο που έχει συσταθεί για AVCHD, θα πρέπει να μπορείτε να επεξεργαστείτε AVCHD με αυτό τον υπολογιστή.
    Εγώ συνιστούμε να βελτιστοποιήσετε Vista, όμως, έτσι ώστε θα έχετε την καλύτερη απόδοση. Να πώς να το κάνουμε:
    http://www.adobeforums.com/webx/.3bc448a7
    Also, make sure your Vista is updated to Service Pack 1.
    Επίσης, βεβαιωθείτε ότι η ενημέρωση να είναι Vista Service Pack 1.

  • How to solve crash problem of firefox?

    How to solve crash problem of firefox?

    Hi Jamalzoal,
    Dose your computer have the most recent iTunes on it? When you connect the iPad 2 to your computer what happens? dose iTunes tell you the iPad need to be restored?
    p.s. you post this question in the Apple Remote Desktop community. You would probable have gotten more an fast responses if you posted this in the iPad community.

  • Anyone else having crash problems with mountain lion and parallels 8.0?

    Anyone else having crash problems running Mountain Lion and Parallels 8.0 ?

    Works OK so far for me. Take you issues to their forums for more direct help. These forums do not provide suport for Parallels.

  • 9.1.1 - OS 10.6.3 crash problems

    Joined: 18 May 2009
    Posts: 1
    Posted: Sun May 02, 2010 6:23 pm Post subject: 9.1.1 - OS 10.6.3 crash problems
    I've been experiencing crashing in 9.1.1 when I create a new instrument or audio track in an empty project (no 3rd party plugs) or when I try to click on any plugin preset browser in an existing project. Any ideas what might be happening - things were going smoothly until this started happening
    here is a crash report -
    Thread 0 Crashed: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x965da132 __kill + 10
    1 libSystem.B.dylib 0x965da124 kill$UNIX2003 + 32
    2 libSystem.B.dylib 0x9666c8e5 raise + 26
    3 libSystem.B.dylib 0x96682931 __abort + 124
    4 libSystem.B.dylib 0x966829ad abortreportnp + 0
    5 com.apple.logic.pro 0x00405649 std::ostream& TraceOutContainer<CEvs>(std::ostream&, CEvs, char const*, int) + 3974297
    6 libSystem.B.dylib 0x965df42b _sigtramp + 43
    7 ??? 0x0000000b 0 + 11
    8 MAAssetSharing 0x00eea4a7 MADSManagerDumpToConsole + 1559
    9 MAAssetSharing 0x00eeb5b3 MADSManagerGetManagerForIdentifier + 35
    10 com.apple.logic.pro 0x0070d38d std::ostream& TraceOutContainer<CEvs>(std::ostream&, CEvs, char const*, int) + 7152093
    11 com.apple.logic.pro 0x000aa235 std::ostream& TraceOutContainer<CEvs>(std::ostream&, CEvs, char const*, int) + 454789
    12 com.apple.logic.pro 0x0070648c std::ostream& TraceOutContainer<CEvs>(std::ostream&, CEvs, char const*, int) + 7123676
    13 com.apple.logic.pro 0x007070fe std::ostream& TraceOutContainer<CEvs>(std::ostream&, CEvs, char const*, int) + 7126862
    14 com.apple.Foundation 0x9078f970 __NSFireTimer + 141
    15 com.apple.CoreFoundation 0x9423976b __CFRunLoopRun + 8059
    16 com.apple.CoreFoundation 0x942370f4 CFRunLoopRunSpecific + 452
    17 com.apple.CoreFoundation 0x94236f21 CFRunLoopRunInMode + 97
    18 com.apple.HIToolbox 0x97fa20fc RunCurrentEventLoopInMode + 392
    19 com.apple.HIToolbox 0x97fa1eb1 ReceiveNextEventCommon + 354
    20 com.apple.HIToolbox 0x97fa1d36 BlockUntilNextEventMatchingListInMode + 81
    21 com.apple.AppKit 0x96b39135 _DPSNextEvent + 847
    22 com.apple.AppKit 0x96b38976 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
    23 com.apple.AppKit 0x96afabef -[NSApplication run] + 821
    24 com.apple.prokit 0x00fcaab1 NSProApplicationMain + 326
    25 com.apple.logic.pro 0x0002aa55 DummyConnection::DummyConnection() + 193
    Thread 1: Dispatch queue: com.apple.libdispatch-manager
    0 libSystem.B.dylib 0x9659fb42 kevent + 10
    1 libSystem.B.dylib 0x965a025c dispatch_mgrinvoke + 215
    2 libSystem.B.dylib 0x9659f719 dispatch_queueinvoke + 163
    3 libSystem.B.dylib 0x9659f4be dispatch_workerthread2 + 240
    4 libSystem.B.dylib 0x9659ef41 pthreadwqthread + 390
    5 libSystem.B.dylib 0x9659ed86 start_wqthread + 30
    Thread 2:
    0 libSystem.B.dylib 0x96598286 select$DARWIN_EXTSN + 10
    1 com.apple.CoreFoundation 0x9427782d __CFSocketManager + 1085
    2 libSystem.B.dylib 0x965a6a19 pthreadstart + 345
    3 libSystem.B.dylib 0x965a689e thread_start + 34
    Thread 3:
    0 libSystem.B.dylib 0x9659ebd2 _workqkernreturn + 10
    1 libSystem.B.dylib 0x9659f168 pthreadwqthread + 941
    2 libSystem.B.dylib 0x9659ed86 start_wqthread + 30
    Thread 4:
    0 libSystem.B.dylib 0x965a7262 _semwaitsignal + 10
    1 libSystem.B.dylib 0x965a700d pthread_condwait + 1430
    2 libSystem.B.dylib 0x965a8bb8 pthreadcondwait$UNIX2003 + 73
    3 ...le.music.apps.MAAudioEngine 0x02bba437 GetCurrentCoreAudioDeviceNameFromUserDefaults(signed char) + 18439
    4 libSystem.B.dylib 0x965a6a19 pthreadstart + 345
    5 libSystem.B.dylib 0x965a689e thread_start + 34
    Thread 5:
    0 libSystem.B.dylib 0x965792fa machmsgtrap + 10
    1 libSystem.B.dylib 0x96579a67 mach_msg + 68
    2 com.apple.audio.midi.CoreMIDI 0x012e0f31 XServerMachPort::ReceiveMessage(int&, void*, int&) + 155
    3 com.apple.audio.midi.CoreMIDI 0x012ff8fe MIDIProcess::RunMIDIInThread() + 150
    4 com.apple.audio.midi.CoreMIDI 0x012e2149 XThread::RunHelper(void*) + 17
    5 com.apple.audio.midi.CoreMIDI 0x012e1b16 CAPThread::Entry(CAPThread*) + 96
    6 libSystem.B.dylib 0x965a6a19 pthreadstart + 345
    7 libSystem.B.dylib 0x965a689e thread_start + 34
    Thread 6:
    0 libSystem.B.dylib 0x9657935a semaphoretimedwait_signaltrap + 10
    1 libSystem.B.dylib 0x965a6ea1 pthread_condwait + 1066
    2 libSystem.B.dylib 0x965d5a28 pthreadcond_timedwait_relativenp + 47
    3 ...ple.CoreServices.CarbonCore 0x93a44465 TSWaitOnConditionTimedRelative + 242
    4 ...ple.CoreServices.CarbonCore 0x93a441a3 TSWaitOnSemaphoreCommon + 511
    5 ...ple.CoreServices.CarbonCore 0x93a683eb TimerThread + 97
    6 libSystem.B.dylib 0x965a6a19 pthreadstart + 345
    7 libSystem.B.dylib 0x965a689e thread_start + 34
    Thread 7:
    0 libSystem.B.dylib 0x9659ebd2 _workqkernreturn + 10
    1 libSystem.B.dylib 0x9659f168 pthreadwqthread + 941
    2 libSystem.B.dylib 0x9659ed86 start_wqthread + 30
    Thread 8:
    0 libSystem.B.dylib 0x9659ebd2 _workqkernreturn + 10
    1 libSystem.B.dylib 0x9659f168 pthreadwqthread + 941
    2 libSystem.B.dylib 0x9659ed86 start_wqthread + 30
    Thread 9:
    0 libSystem.B.dylib 0x965a7262 _semwaitsignal + 10
    1 libSystem.B.dylib 0x965d2e44 nanosleep$UNIX2003 + 188
    2 libSystem.B.dylib 0x965d2d82 usleep$UNIX2003 + 61
    3 com.apple.AppKit 0x96ca2885 -[NSUIHeartBeat _heartBeatThread:] + 2039
    4 com.apple.Foundation 0x907618dc -[NSThread main] + 45
    5 com.apple.Foundation 0x9076188c _NSThread__main_ + 1499
    6 libSystem.B.dylib 0x965a6a19 pthreadstart + 345
    7 libSystem.B.dylib 0x965a689e thread_start + 34
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0x00000000 ebx: 0x966828c1 ecx: 0xbfffd65c edx: 0x965da132
    edi: 0x00ccb3bc esi: 0x49081840 ebp: 0xbfffd678 esp: 0xbfffd65c
    ss: 0x0000001f efl: 0x00000286 eip: 0x965da132 cs: 0x00000007
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    cr2: 0x70da76c0

    roweski wrote:
    Removing the old preference file was the first thing I tried with no luck.
    I just fixed the problem by removing the 'application support/logic' folder. Logic behaved normally.
    You mean the one in your user library? So you the culprit was one of your custom presets (that you have now lost)?
    The strange thing is that I then dragged the old folder contents back into the newly created logic folder
    Are you talking a project folder or the user appsupport folder?
    and overwrote all the files so that the content was EXACTLY the same as before. Logic still works fine - bizarre...
    Well, if deleting your user application support folder solved the problem, the 'faulty' file was in there. Too bad you now cannot narrow it down further by deleting perhaps subfolders or even individual files from that folder until it was resolved; that way you would have had one or a few specific files that were the cause. Now you won't know until it happens again and try it like this, I guess.
    But, if it works it works.

  • CS4 Crashing Problems - Questions

    Just curious in regards to all of these "CS4 Crashing" problems.
    1) Before updating to Snow leopard, did you people do due diligence by at the very least checking the S.M.A.R.T. status of your drives and do a Permission Repair first BEFORE updating?
    2) Did you make a clone of your working perfectly Leopard disk, or at least do a current (minutes before) Time machine backup?
    3) Did you check first which 3rd party extensions such as those by Unsanity (FontCard), YouControl(Font), Growl, etc. that will NOT play nice with Snow Leopard yet until they are updated (if ever?)... and pre-update delete them?
    4) Did you check to make sure that all of your fonts have been disabled and those that are NOT specifically from Apple, are removed from the User Font folders... and NOT set to load at startup?
    Now after all of that... did ya still "freely" and without a gun to your head, update to Snow Leopard... a brand spankin' new (dot.zero) OS release and expect absolutely NO bugs: small, large or just inconvenient for the time being?
    And now your whining here?... and complaining to Apple?
    Have any of you considered reverting to your clone of Leo 10.5.8 until certain issues (yours) have been fail-safely fixed?
    For the record, I did a straight-up SL update on a 2.16 CoreDuo MBP, and a 2008 8-core MacPro with NO problems! Everything working fine in 32-bit and 64-bit (MacPro), including even FreeHand under Rosetta.
    NOTE: check your fonts!!! Whenever something crashes here or at any of my clients unexpectedly, font and/or font cache corruption has been the main culprit, now for over 20 years(!)

    DocPixel-BMW wrote:
    Well on one hand, I was guilty of letting out a rant against all of the whiners... on the other I was trying to be a bit helpful.
    Maybe it will cause someone to think before starting another "Adobe or Apple must die or fix this" thread. It grates on the nerves... considering most should "fix" their expectations, upgrade habits, and most of all, the area between their ears first... BEFORE posting.
    Welcome to the common sense club. A club with very few members.

  • Touch persistently crashing - problems with USB/iTunes/Windows 7?

    Hi!
    I received a 64gb Touch for Christmas and have a persistent crashing problem. The Touch appears to be randomly crashing across any app or even just playing music - there seems to be no common link. This could be once in a few hours or repeatedly 4/5 times in succession.
    It's possible I have a faulty unit but wonder also if I may have an issue with updating/syncing as any sync that takes a reasonable amount of time disconnects and reconnects several times. I had this on my 1st gen Shuffle also - it's almost as though something is disconnecting the USB port and then reconnecting it. I'll mention at this point that I have no other USB related issues - I can run a backup of several hours to a USB harddisk and have no issues and no other USB device has had any sort of problem. If there is a USB issue, it's only happening with iTunes and my iPod(s).
    My theory then is that the initial upgrade of the Touch to 3.1.2 on first sync is being corrupted in some way because of the disconnecting issue and that then is causing the crashing as the os is unstable. The Touch has been reinstalled 3 times since purchase and each time having the disconnection issue appear and the resulting persistent crashing.
    Hopefully someone can tell me I'm wrong/right in my theory and maybe suggest a way I can fix the disconnection problem so I can at least try a clean reinstall of the Touch and see if that solves the crashing problem before I send the unit back.
    Cheers!

    I bought my iPod Touch 32gb last week and as soon as I plugged it in iTunes told me to update to v3.1.2 (came with v3.1.1 installed.) I accepted to install v3.1.2 and it finished installing then restarted. It flashed up in iTunes then disconnected and the ipod went blank, then came up with the apple log for about 1 or 2 minutes, then flashed up again in itunes. It then kept restarting and dissapearing. I left it doing this for about 15 minutes then unplugged the usb lead. It then restarted and all seemed fine.
    I had put a couple of albums on. Then I sorted out some more music and done another sync & the **** thing got stuck in the restart loop again.
    This was on my laptop which has Windows vista.
    I then thought maybe the update to v3.1.2 had gone wrong so i reinstalled it on my main pc. It didn't get stuck in the restarting loop so I thought I had solved the problem. I put my music on my main pc (Windows 7) and done a resync and the blasted thing got stuck in restart loop again.
    My son bought his 8GB touch this week and his came with v3.1.2 allready installed and he hasn't had a single problem with it. I hadn't downloaded any apps for mine but he has loads of them and it hasn't crashed once.
    I am taking mine back to the shop tomorrow as i have had it less than 10 days.
    Am not sure what it is but it is very annoying. I hope the replacement i get works properly.

  • IOS crash report - mediaserverd: RPCTimeout message received to terminate

    I see some strange crash reports which I couldn't understand much what it is. I believe it is something related to audio service in iOS. I am working on a audio app where each record is played in FIFO order. Is the crash log is something to do with my app? Here is the snippet of the crash report
    Incident Identifier: 56987C0E-3207-43E2-A30F-CA62DACA341B
    CrashReporter Key:   39cfbba1b55bae50131e2b43a44f512635ffdedc
    Hardware Model:      iPod5,1
    OS Version:          iPhone OS 6.1.3 (10B329)
    Kernel version:      Darwin Kernel Version 13.0.0: Wed Feb 13 21:37:47 PST 2013; root:xnu-2107.7.55.2.2~1/RELEASE_ARM_S5L8942X
    Date:                2013-09-20 19:48:08 +0530
    Exception Code:      0xbe18d1ee
    Reason:              mediaserverd: RPCTimeout message received to terminate [4773] with reason 'fig rpc timeout -- playerremote_CopyProperty [ NowPlayingAppPID ]'
    Thermal Level:       0
    Thermal Sensors:    3284 3517 3539 3165 3594
    Frontmost process PID:    68
    Jetsam Level:              0
    Free Pages:            21115
    Active Pages:          22813
    Inactive Pages:        14162
    Purgeable Pages:        1390
    Wired Pages:           21867
    Speculative Pages:       765
    Throttled Pages:       47808
    Busy Buffer Count:         0
    Pages Wanted:              0
    Pages Reclaimed:           0
    Process 0 info:
        resident memory bytes:  70152192
        page faults:              10157
        page-ins:                     0
        copy-on-write faults:         0
        user   time in task: 201946.766630 seconds
        system time in task:     0.000000 seconds
    Process 0 kernel_task threads:
    thread 0x1 TH_WAIT|TH_UNINT 0x803262e0
        thread priority:          92
        thread sched flags:     none
        kernel cont 800622ed
        user   time in thread:     1.240739 seconds
        system time in thread:     0.000000 seconds
    thread 0x2 TH_RUN|TH_IDLE 0
        thread priority:           0
        thread sched flags:     none
        kernel cont 800256c9
        user   time in thread: 98035.929317 seconds
        system time in thread:     0.000000 seconds
    thread 0x3 TH_WAIT|TH_UNINT 0x80022059
        thread priority:          95
        thread sched flags:     none
        kernel cont 80022059
        user   time in thread:    20.278736 seconds
        system time in thread:     0.000000 seconds
    thread 0x4 TH_WAIT|TH_UNINT 0x80300c20
        thread priority:          80
        thread sched flags:     none
        kernel cont 8002cf39
        user   time in thread:     6.273227 seconds
        system time in thread:     0.000000 seconds
    thread 0x5 TH_WAIT|TH_UNINT 0x80300c28
        thread priority:          93
        thread sched flags:     none
        kernel cont 8002d135
        user   time in thread:     0.005678 seconds
        system time in thread:     0.000000 seconds
    thread 0x6 TH_WAIT|TH_UNINT 0
        thread priority:          94
        thread sched flags:     none
        kernel cont 8002fc65
        user   time in thread:     0.202646 seconds
        system time in thread:     0.000000 seconds
    thread 0x7 TH_WAIT|TH_UNINT 0xcbaea45c
        thread priority:          95
        thread sched flags:     none
        kernel 0x80024cab 0x800244d9 0x80033173 0x8008655c
        user   time in thread:     0.000296 seconds
        system time in thread:     0.000000 seconds
    thread 0x8 TH_WAIT|TH_UNINT 0x8ccda544
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000012 seconds
        system time in thread:     0.000000 seconds
    thread 0xb TH_WAIT|TH_UNINT 0x8cd7ee04
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:   426.026233 seconds
        system time in thread:     0.000000 seconds
    thread 0x1b TH_WAIT|TH_UNINT 0x8cd2e33c
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000021 seconds
        system time in thread:     0.000000 seconds
    thread 0x20 TH_WAIT|TH_UNINT 0x803187fc
        thread priority:          81
        thread sched flags:     none
        kernel cont 801e1c79
        user   time in thread:     0.000019 seconds
        system time in thread:     0.000000 seconds
    thread 0x21 TH_WAIT|TH_UNINT 0x8cd8c01c
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.038029 seconds
        system time in thread:     0.000000 seconds
    thread 0x22 TH_WAIT|TH_UNINT 0x8ce2cea4
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000011 seconds
        system time in thread:     0.000000 seconds
    thread 0x2a TH_WAIT|TH_UNINT 0x8ce2c6ac
        thread priority:          81
        thread sched flags:     none
        kernel 0x80024cab 0x800244d9 0x80256b19 0x8008655c
        user   time in thread:     0.000019 seconds
        system time in thread:     0.000000 seconds
    thread 0x2e TH_WAIT|TH_UNINT 0x8ce3f134
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000019 seconds
        system time in thread:     0.000000 seconds
    thread 0x62 TH_WAIT|TH_UNINT 0x8cdf6044
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     8.861949 seconds
        system time in thread:     0.000000 seconds
    thread 0x64 TH_WAIT|TH_UNINT 0x8ce8f724
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000018 seconds
        system time in thread:     0.000000 seconds
    thread 0x65 TH_WAIT|TH_UNINT 0x8ce8f6d4
        thread priority:          81
        thread sched flags:     none
        kernel 0x80024cab 0x800244d9 0x80256b19 0x8008655c
        user   time in thread:    10.040660 seconds
        system time in thread:     0.000000 seconds
    thread 0x66 TH_WAIT|TH_UNINT 0x8ce8f47c
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     2.540202 seconds
        system time in thread:     0.000000 seconds
    thread 0x67 TH_WAIT|TH_UNINT 0x8ce8f2c4
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.250538 seconds
        system time in thread:     0.000000 seconds
    thread 0x68 TH_WAIT|TH_UNINT 0x8cf46ea4
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000010 seconds
        system time in thread:     0.000000 seconds
    thread 0x69 TH_WAIT|TH_UNINT 0x8cf46d64
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000009 seconds
        system time in thread:     0.000000 seconds
    thread 0x6a TH_WAIT|TH_UNINT 0x8cf46c4c
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.048119 seconds
        system time in thread:     0.000000 seconds
    thread 0x6b TH_WAIT|TH_UNINT 0x8cf46abc
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000009 seconds
        system time in thread:     0.000000 seconds
    thread 0x6c TH_WAIT|TH_UNINT 0x8cf468dc
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000009 seconds
        system time in thread:     0.000000 seconds
    thread 0x6e TH_WAIT|TH_UNINT 0x8cf46634
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:    36.630748 seconds
        system time in thread:     0.000000 seconds
    thread 0x6f TH_WAIT|TH_UNINT 0x8cf46404
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:    36.139442 seconds
        system time in thread:     0.000000 seconds
    thread 0x71 TH_WAIT|TH_UNINT 0x8cf4610c
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000021 seconds
        system time in thread:     0.000000 seconds
    thread 0x73 TH_WAIT|TH_UNINT 0x8cef5b84
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.106043 seconds
        system time in thread:     0.000000 seconds
    thread 0x74 TH_WAIT|TH_UNINT 0x8ceb9cec
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000012 seconds
        system time in thread:     0.000000 seconds
    thread 0x75 TH_WAIT|TH_UNINT 0x8ceb992c
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000010 seconds
        system time in thread:     0.000000 seconds
    thread 0x76 TH_WAIT|TH_UNINT 0x8ceb9454
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000010 seconds
        system time in thread:     0.000000 seconds
    thread 0x78 TH_WAIT|TH_UNINT 0x8ced3ef4
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000020 seconds
        system time in thread:     0.000000 seconds
    thread 0x79 TH_WAIT|TH_UNINT 0x8ced3c4c
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000013 seconds
        system time in thread:     0.000000 seconds
    thread 0x7a TH_WAIT|TH_UNINT 0x8ced39a4
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     6.925023 seconds
        system time in thread:     0.000000 seconds
    thread 0x7b TH_WAIT|TH_UNINT 0x8ced36fc
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.000009 seconds
        system time in thread:     0.000000 seconds
    thread 0x7c TH_WAIT|TH_UNINT 0x8ced3134
        thread priority:          81
        thread sched flags:     none
        kernel cont 80256add
        user   time in thread:     0.009044 seconds
        system time in thread:     0.000000 seconds
    Thanks,
    Shashank

    I just had the same "scam" this evening.  I got the Safari message: "http://supportcallnow.com 'warning!! iOS Crash Report' "  Due to a third party application in your phone, iOS crashed.  Contact Support for an immediate fix - 1-800-480-4170.  I too called the phone # to see what was going on.  It went straight on hold when I called (didn't ring) and then when someone came on the line, it was a woman who I could barely hear due to the noise in the background.  She stated that my ios crashed and was no longer something on my iPhone5S and that a 3rd party was at that time taking all my info. off my phone (nice "scare tactic" eh?).  She then said for $80 though she could reinstall ios and just needed my credit card # (yeah, ooooookkkay).  So I said that was ridiculous as I had been using apps and my phone the whole time I was talking to her on speaker and said I would call Apple Support directly.  She told me they would say the same thing about having to pay to have ios reinstalled on my phone.  I said I highly doubt it and told her I wouldn't pay the money and that she was essentially full of crap.  She then said (prob after realizing I wasn't buying any of it) "OK ma'am" and hung up on me.
    Adamfrombessemer's advice works if you're surfing sites and get a "ios Crash Report" message in Safari on your iPhone like I did!
    1.  Place the phone in Airplane mode.
    2.  Go to Settings > Safari > And Clear History and website Data
    3.  Reopen safari and all will be gone. Turn off Airplane mode.
    Definite scam!

  • HT204204 got message Warning IOS Crash Report Due to a thirdp party application in your phone IOS is crashed...call for immediate support 16473604777  no i cannot get into Safari. Please help

    Hi,
    I was working on my New Ipad Mini in Safari when I received error Message Warning IOS Crash Report Due to a third party application in your phone. IOS crashed contact Support for immediate FIX 16473604447.  What do I do i called that number and wasn't goint to pay someone other than applie to fix this error.  I bought insurance, these people said Apple would not be able to help me.
    please i need this ipad for a trip im taking in a couple of days.
    I can't get into Safari the above error message keeps on popping up blocking me from getting in.

    Double tap the Home button, then swipe upwards on the Safari preview.
    Go to Settings - Safari - Clear History
    Restart Safari.
    And nd never, ever call any number presented.

  • Crash Problems

    I have been having crash problems on a regular basis since upgrading to Yosemite.  It seems that if a site (URL) has not fully loaded, or if I am just opening Safari, and I try to move quickly to another site, the thing crashes.  This has been persistent, and is very annoying.  Every time it happens I send in the crash report, but nothing seems to be getting corrected.  You need to work on this.  I am really close to moving to FireFox.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Maybe you are looking for

  • Cannot install DBD::Oracle perl module with Oracle 11.2.0.3 client

    Hi I have been trying to install DBD::Oracle perl module on a Centos 5.7 server which is running Oracle client version 11.2.0.3. I have installed all dependencies prior to attempting installing the same and I am running into the following error - /us

  • Writing a class using random generator in bluej

    Hello Im trying to write a class for a deck of cards. Im using a random generator but I dont know how to write the instance variable. I have to make 4 suits heart, club, spade, dimonds. and 13 for face value. I know how to random generate numbers. Li

  • Unable to start subflow in SXMB_MONI_BPE

    Hi, Due to a basis problem all interfaces are stopped during six hours. After that  when service is restarted i've tryed to reprocess stopped bmp's in SXMB_MONI_BPE transaction. But most of them continue in error and message "Unable to start subflow"

  • ADF BC/Struts/JSP

    I'm hoping some of you out there can just confirm some of my observations and maybe answer a few high level questions. I have been playing around with Jdev 9052 for a few days, I've read Steve Muench's Data Binding primer and have even created a few

  • List Component

    Ridiculously simple, but doing my head in - how do I add links into a list compnent - I'm really new to this actionscripting stuff and I ain't got a clue. I just want each item in a lst of 7 items to link to a particular keyframe in the movie. So sim