IOS 7 not working with car radio

After updating iPhone 5 with iOS 7, it wont connect to my car radio - I simply get the message "USB ERROR"
Any fixes?

I wish I could find a solution my car radio is doing the same I have a clarion cz702 CD player. It doesn't even try to charge my phone it's like my phone locks the CD player from communication with my cd player

Similar Messages

  • Ios 8 not working with chevy link

    I upgraded my ipad 3 and iPhone 4S to IOS 8.  After the upgrade neither device works correctly in my Chevrolet vehicle via Chevy Link. Both devices worked perfectly with Chevy Link when I was using IOS7.
    When I plug in my ipad or Iphone it will connect and play songs but as soon as I select a playlist it displays an error message in my vehicle information screen.  When you click "OK" to clear the message the device is immediately disconnected from Chevy link and the radio goes back to XM.
    Any suggestions how to remedy the situation?  As I said before, all of my Apple devices worked perfectly under IOS7.

    After having the same problem with my 2013 Chevy Equinox, I did a factory reset of my iPhone 5s and re-installed IOS 8 from scratch.
    I used my iTunes backup to restore my apps, contacts, photo ..etc
    Since I did that, I was able to connect my phone via bluetooth to my Chevy Equinox, make phone calls, listen to music ..etc
    So far so good. I made about 10 calls, stopped the car, restarted the car and reconnected the phone and it worked.
    I wonder if the upgrade from IOS 7 to IOS 8 is not working properly and causing problems with Bluetooth. It seems that a full install after a factory reset fixed my problem.
    Hopefully, it is the end of the nightmare. Good luck.

  • Bluetooth on iPhone 6 does not work with car stereo

    I have used iPhone 4, 4S, 5 and 5S on my car - my own and my families phones. They all work as intended with regard to music and most importantly telephony. My car (FORD S-MAX) has buttons etc. for phone navigation. My daughters and wifes 5S's still work.
    When I paired my new iPhone 6, the pairing itself was successful, but it does not work at all.
    1) Incoming calls show my own telephone number, regardless of who calls
    2) I cannot use the car buttons for anything, neither pickup, hangup or anything else
    3) Regardless of what I do, the Podcast starts playing, if I choose Bluetooth as sound input on car. If I click pause on Podcast, it resumes after a while, sometimes immediately.
    4) If I use the phone to dial a number, the sound is not in the car, even if sound source is Bluetooth/Car. If I select something else and back to car, the sound is in the car.
    Hopefully this is soon to be solved! Or is there already a solution out there?
    Best regards
    Matt, Denmark

    My iPhone 6 pairs just fine with my 07 Z4 ,no idrive etc just the basic B/T install  on a Business standard radio set up with e snap in connector for the iPhone
    but not yet an iPhone 6 snap in
    You may need to ensure you clear all ol pairings from Beemer they have a limited number of pairings that can be stored at one time
    To dispel all the bad press my 6 also happily paired with my '13 X1 without any issues and with the correct snap in also  plays audio
    The issue is usually with iDrive which BMW do have some issues with

  • E51 will not pair with car radio hands free

    With the radio switched on I do a search and the phone finds the hands free (KCA-BT200) Kenwood headset.
    I have tried to pair the phone with the hands free and comes back with a message Unable to pair with KCA-BT200.
    This was not a problem with my previous phone HTC touch Pro.
    How do I get the devices to pair?
    An observation that may be significant is that the search shows the hands free device name and a speaker with a music note attached.

    Hi
    Check to see if the e51 is working with other devices.  If it is then it will be that the Kenwood device thats causing the issue.
    It may be that the Kenwood device is full of pairings, if it is, it will not allow you add anymore devices.  Perform a full factory reset and see if this does the trick.
    Hope this helps
    Nokia Accredited Car Kit Engineer
    e:[email protected]
    www.inekar.com Please Kudos me if you think I help!

  • IPhone 3G does not work with car integration after 2.2 update

    I just upgraded my iPhone 3G with the new 2.2 software update and now it doesn't work with my car integration. Very frustrating... I have a 2009 Honda Civic that has a USB interface. Before the update I was able to charge and play music through the USB interface. In addition, I could also control the music through the stereo. After the update, it says not compatible and it doesn't even charge the phone anymore. Doesn't anyone have the same problem or know how to fix it? Street view is cool but i will definitely revert back to 2.1 if I can't fix this...

    I am having the same problem here After updating to 2.2 the iPhone has stopped working in the car. The stereo just simply refuses to see it. The car in question is a brand new 2009 VW Polo Match, which I know is not as fault as tried it with a iPod nano and worked fine.
    Is reinstalling the firmware only solution to this? Do we know the cause yet?

  • IOS 8 not working with bluetooth controls in BMW

    Just upgraded to IOS 8 and now most of the interface functions with BMW iDrive stopped working.  I am able to manually make and receive calls via the car and manually play bluetooth audio, but no other controls work.  I cannot dial the phone, select playlists, access contacts.  I have already reset all system settings on the phone, re-paired the phone with the car in every conceivable combination, etc. and still no luck.  Do I have to revert back to IOS 7 which worked fine and wait for Apple to fix this problem?  I called BMW and they said it is was an Apple problem.  This is the response I expected from them but I believe they are correct because IOS 8 seems to be causing similar problems in other vehicles as well (I have seen Audi and Ford and a few others).  Anyone found a solution to this.  Apple, are you listening??

    I confirm the issue, in my case I cannot make and receive calls thru the idrive since I've upgraded to IOS, I had hopes in the newest upgrade IOS 8.0.2 but the problem remains. Really disappointing. Please Apple take action soonest.
    iPhone 5s, iOS 8.0.2

  • Bluetooth will not work with car stereo after IOS6

    I upgraded to ios6 and lost a number of Bluetooth  functions with Alpine car stereo  1. Can no longer control playback from head unit. 2. Track info no longer displayed on head unit. 3.  When head unit finds iPhone it no longer begins to play automatically.

    If this is an after market car radio, you can go to the manufacures website, and they should have an update available for your head unit.  Some manufactures dont have it available and you may need to replace and update your head unit.  If this is factory installed, go to your local dealership, and they can do the update for you.

  • Bluetooth not working with car audio and macbook pro ret

    I use Iphone 5 and macbook pro ret with 10.8.2. but I cant pair it via Bluetooth with any other item (Mercedes Comand). Not even with the Mac.  very unhelpfull with a new phone and new apple macbook. what can help

    iPhones have NEVER paired with laptops except for the sole purpose of tethering.  Have you read your Mercedes operating manual and made sure the Command is in pairing mode?

  • IPhone 5 not working with car USB after iOS8.2 update

    Hi,
    After upgrading my iPhone 5 (32GB, 8.9GB free, model MD299PP/A) to iOS 8.2 (12D508), it doesn't work as usual when connecting to my car's USB port. Before upgrade, I can still see the track names or podcast info in my car stereo display, and can use the navigation controls to select songs. Now, my car stereo display says "iPod NO MUSIC" or "iPod ERROR READING", and can't use the nav controls, although the sound is still coming out of the car speakers.
    The above error is seen on my Toyota Corolla Altis 1.6G, so I tried it in my Ford Fiesta 1.5 Sports. Same problem, the dashboard says that "ERROR READING FILE".
    I then connected my iPad Air (iOS 8.1.3), and it works well with both cars.

    Howdy emoy81,
    It sounds like you upated your iOS device to 8.2 and now you are unable to listen to your iPhone through your car due to this error message. I would recommend usin these troubleshooting steps from the following article:
    Get help using your iPhone, iPad, or iPod touch with your car stereo
    Troubleshooting tips
    Try these troubleshooting tips.
    Beginning playback and controlling music
    Some car stereos might require that playback be started or controlled from either the device or the stereo. Ensure that your car stereo is set to the proper input for your device. If it is and you cannot hear sound from your car speakers, try switching to your radio and then back to the proper input.
    When using adapters to connect to your car stereo, you might notice variations in audio quality. When possible, use a shorter connection to the car stereo or try a different cable or adapter.Disconnect and restart
    If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.Isolate the issue
    Try to reproduce the issue with an identical or similar accessory, if one is available, or test with a second device.
    For example, if you hear static coming from the left audio channel, try connecting a different device or try connecting to a different stereo or accessory that connects over the same interface (30-pin or Lightning connector, Bluetooth, or headphone jack).Restore iPhone, iPad, or iPod touch
    If you have isolated an issue to the device, restore iPhone, iPad, or iPod touch to its factory condition. You should rarely need to use this step with an accessory issue. If the issue affects only a third-party accessory, contact the accessory manufacturer before restoring your iOS device.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Iphone not working with car headunit

    I have a JVC KW-NX7000 installed in my 2004 Subaru WRX wagon. I must say the head unit is amazing, i love it! I just recently bought a Iphone 3g. I read all the info about both the head unit and phone and then bought a JVC KS-U30 audio/video cable.
    I can not get the head unit to see the phone. Just keeps telling me no USB device but will charge the iphone. Thought it might be the cable or head unit so tryed a friends ipod touch. That worked perfict. Tryed another friends iphone 3g also with no luck. I have the AV setting on the head unit set to Ipod, is there another setting i am missing-maby one on the phone? Any help would be much appriciated.

    I have a simmilar problem, i have a JVC KD-R606 head unit and seem to have connection issues first thing in the morning or when it's a bit cold it just will not connect, also when i do get it to connect the audio switches over to the Stereo bluetooth connection from the dock connector after about 20 seconds and then have to manually go through the iphone to change the output source to the dock connector, it still works ok when a phone call comes in it switches to the bluetooth automatically and back to the dock connector again, it's getting a bit annoying when it's connecting for the first time and keeps switching speaker source.

  • IOS 15 not working with my TACACS server

    Hi All,
    I recently made some changes to the way my Tacacs server (ACS4.2) handled groups etc..
    This all works fine and when I log onto my devices I get prompted for my credentials, which authenticate against AD. However, since I made these changes none of the devices on IOS 15 now authenticate. I am immediately prompted for a local password rather than a username and password..
    I understand that the commands for Tacacs changeda bit in IOS15 but from what I have read and changed I'm still having trouble. Config below from once of the routers I'm having trouble with...
    Am I missing something?
    aaa new-model
    aaa group server tacacs+ ACS1
    server name AUTH
    aaa authentication login ACS-List group ACS1 local
    aaa authorization exec ACS-List group ACS1 local
    aaa accounting commands 15 ACS-List
    action-type start-stop
    group ACS1
    aaa session-id common
    acacs-server directed-request
    tacacs server AUTH
    address ipv4 172.x.x.x
    key 7 xxxxxxxx
    and on my VTY Lines...
    privilege level 15
    password 7 151619050826222A2F
    authorization exec ACS-List
    accounting commands 15 ACS-List
    accounting exec ACS-List
    login authentication ACS-List
    length 0
    transport input telnet ssh

    I ran those debugs, then tried to login on another telnet session -
    Jul  2 15:01:57.278: TPLUS: Queuing AAA Accounting request 1781 for processing
    Jul  2 15:01:57.278: TPLUS: processing accounting request id 1781
    Jul  2 15:01:57.278: TPLUS: Sending AV task_id=1997
    Jul  2 15:01:57.278: TPLUS: Sending AV timezone=SIN
    Jul  2 15:01:57.278: TPLUS: Sending AV service=shell
    Jul  2 15:01:57.278: TPLUS: Sending AV start_time=1372777317
    Jul  2 15:01:57.278: TPLUS: Sending AV priv-lvl=15
    Jul  2 15:01:57.278: TPLUS: Sending AV cmd=terminal monitor
    Jul  2 15:01:57.278: TPLUS: Accounting request created for 1781(admin)
    Jul  2 15:01:57.278: TPLUS: using previously set server 172.x.x.x from group ACS1
    Jul  2 15:01:57.278: TPLUS(000006F5)/0/NB_WAIT/3120C74C: Started 5 sec timeout
    Jul  2 15:01:57.630: TPLUS(000006F5)/0/NB_WAIT: socket event 2
    Jul  2 15:01:57.630: TPLUS(000006F5)/0/NB_WAIT: wrote entire 144 bytes request
    Jul  2 15:01:57.630: TPLUS(000006F5)/0/READ: socket event 1
    Jul  2 15:01:57.630: TPLUS(000006F5)/0/READ: Would block while reading
    Jul  2 15:01:57.990: TPLUS(000006F5)/0/READ: socket event 1
    Jul  2 15:01:57.990: TPLUS(000006F5)/0/READ: read 0 bytes
    Jul  2 15:01:57.990: TPLUS(000006F5)/0/READ: socket event 1
    Jul  2 15:01:57.990: TPLUS(000006F5)/0/READ: errno 254
    Jul  2 15:01:57.990: TPLUS(000006F5)/0/3120C74C: Processing the reply packet
    Jul  2 15:02:11.658: AAA/BIND(000006F9): Bind i/f
    Jul  2 15:02:11.658: AAA/AUTHEN/LOGIN (000006F9): Pick method list 'ACS-List'
    Jul  2 15:02:11.658: TPLUS: Queuing AAA Authentication request 1785 for processing
    Jul  2 15:02:11.658: TPLUS: processing authentication start request id 1785
    Jul  2 15:02:11.662: TPLUS: Authentication start packet created for 1785()
    Jul  2 15:02:11.662: TPLUS: Using server 172.x.x.x
    Jul  2 15:02:11.662: TPLUS(000006F9)/0/NB_WAIT/3120C74C: Started 5 sec timeout
    Jul  2 15:02:12.014: TPLUS(000006F9)/0/NB_WAIT: socket event 2
    Jul  2 15:02:12.014: TPLUS(000006F9)/0/NB_WAIT: wrote entire 38 bytes request
    Jul  2 15:02:12.014: TPLUS(000006F9)/0/READ: socket event 1
    Jul  2 15:02:12.014: TPLUS(000006F9)/0/READ: Would block while reading
    Jul  2 15:02:12.366: TPLUS(000006F9)/0/READ: socket event 1
    Jul  2 15:02:12.366: TPLUS(000006F9)/0/READ: errno 254
    Jul  2 15:02:12.366: TPLUS(000006F9)/0/3120C74C: Processing the reply packet
    Jul  2 15:02:24.474: AAA/AUTHEN/LOGIN (000006F9): Pick method list 'ACS-List'
    Jul  2 15:02:24.474: TPLUS: Queuing AAA Authentication request 1785 for processing
    Jul  2 15:02:24.474: TPLUS: processing authentication start request id 1785
    Jul  2 15:02:24.474: TPLUS: Authentication start packet created for 1785()
    Jul  2 15:02:24.474: TPLUS: Using server 172.x.x.x
    Jul  2 15:02:24.474: TPLUS(000006F9)/0/NB_WAIT/3120C74C: Started 5 sec timeout
    Jul  2 15:02:24.826: TPLUS(000006F9)/0/NB_WAIT: socket event 2
    Jul  2 15:02:24.826: TPLUS(000006F9)/0/NB_WAIT: wrote entire 38 bytes request
    Jul  2 15:02:24.826: TPLUS(000006F9)/0/READ: socket event 1
    Jul  2 15:02:24.826: TPLUS(000006F9)/0/READ: Would block while reading
    Jul  2 15:02:25.178: TPLUS(000006F9)/0/READ: socket event 1
    Jul  2 15:02:25.178: TPLUS(000006F9)/0/READ: errno 254
    Jul  2 15:02:25.178: TPLUS(000006F9)/0/3120C74C: Processing the reply packet

  • IOS 5 not working with BOSE soundock

    After upgrading my ipod touch to IOS 5 my Bose soundock can not recognize it anymore.
    Has anyone solved this problem?
    Has anyone talked to Apple support about this problem?

    Yes, it seems to be a problem.  See the previous discussions on the right side of this page under the heading "More Like This".

  • IOS 7 not working with Smart Cover

    I have 3ipad minis and a iPad 2 and we have updated to iOS 7 on the three iPad minis and none of them now auto switch off when you use a Smart Cover however on the iPad 2 with the Smart Cover it turns off after two sec is there a problem with the new ios7

    Just need to change the setting
    Open Settings > General > Lock/Unlock
    Change the switch to on (as noted in small print below switch)

  • My ipod touch 3g with ios 5.0.1 does not work with the player's car

    ios 5.0.1 update from my ipod touch 3g does not work with various audio players Car pionerr with previous updates had not had problems like I can solve this problem???
    thanks

    I have tried everything and nothing that happened when you upgrade to ios 5.0.1, I want to know if anyone else has had this problem

  • Voice Memo is not working with iOS 8.2

    Voice Memo Records is not working with iOS 8.2. how to fix it?

    Voice Memo Records is not working with iOS 8.2. how to fix it?

Maybe you are looking for