IOS 7 PROBLEM OF BLUETOOTH OUTPUT..

The time I update my iphone 5 to ios 7 my output audio of my bluetooth got problem..is there any solution to adjust the volume? i tried the volume of the unit and the iphone, it did not work...

There are 2 new things & one old thing that might be causing this issue. Of the new things, one is on the phone itself under Settings > Music: scroll down you'll find a new option to "show all music." If this is on, all of your "cloud" music will appear (which, if you're like me and don't really use the cloud, means music purchased in the iTunes store). So turn that sucker off & those tracks should go away.
Next thing to check is that when you sync your iphone (this setting is on your Mac), go to Music, then look at Playlists and you'll see a new Purchased playlist above all the other ones. It may be checked by default, which would (again) result in all your iTunes Store purchases showing up when you don't necessarily want them to. Uncheck that.
Now for the old thing, when you purchase a track from iTunes Store and then sync your iPhone, the ALBUM will be checked and will sync and keep syncing until you find it and uncheck it. You can find this by highlighting your phone while connected to iTunes (setting is on your computer again), going to Music, then to Albums and scrolling down to find the offending items (they'll be listed under Albums even if you only bought a single). Also wouldn't hurt to take a trip through Arists, Playlists and Genres to make sure nothing is ticked there that shouldn't be.
It's all new to me too, so apologies if none of this works but it should be a start, at least.
Message was edited by: Jackal

Similar Messages

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Tell Apple about it: http://www.apple.com/feedback/iphone.html
Be sure to give as much detail as possible.
I would also check LG's site.

Since updating to iOS 5, my bluetooth and signal have been destroyed. Before the update, the phone worked perfectly, connecting to my bluetooth in car for both calls and music. Reception was also perfect. Now, my bluetooth doesnt work, and I cant be heard

Since I updated my iphone 4 software from 4.3.3/4.3.5 - bought brand new only 2 weeks before the update came out - to iOS 5, my bluetooth no longer works in me ford fiesta and when I ring people, they literally can not hear a word I say. It has nothing to do with poor signal areas as they are the same areas I was in with the same phone before the software update! i have even sent for a replacement phone and received a reconditioned phone (after paying excess charge - JOKE!) and the same problem occured when I updated again. I cannot believe there is no downgrade as this iOS 5 is a shambles and to be honest, I see very little difference in terms of apps and photos so i have no idea why apple are recommending this upgrade!
Is there anything I can do to improve the fact that nobody can hear me on the phone when I speak?!! Or are apple going to insist I keep a phone that is of no use to me if I can't actually use it as a PHONE!
Please please help!

Hi,
Thanks! I forgot to add, I have debonded and rebonded the bluetooth in car and phone and have carried out 3 restores on the phone in my ITunes. All to no avail. I have also jsut spent £40 on a lead from Ford that has made no difference too! I went to them today to request a software upgrade on my car as I though perhaps the lack of connectivity in the car was down to the car being behind the iOS5 software but was informed there was no need for an upgrade and this problem is purely an apple problem! Is there any way around the downgrade? Or are apple gong to resolve this problem at all??

After ios 5 update, bluetooth on ipod touch not funcioning-keynote app no longer pairing with ipad

Since the ios 5 update--bluetooth longer funcioning on ipod touch. iPad no longer syncing with keynote remote app on ipod touch. My iPad no longer sees the iPod touch. The Bluetooth indicator does not come on or flash on the ipod touch.
any help or suggestions?

alex.g wrote:
I've got a fix, even for those who don't have hotspot (like me) who want to get the ipad and iphone talking over bluetooth again.
First, I should say that I said when I got my 4s, the problem was solved. It was not. I was just connecting via wifi, but I wanted bluetooth back.
Here is how I got it back without hotspot.
1. Launch keynote on one device and the remote on the other as you normall would.
2. Find another app that bluetooth links ipad and iphone (I used 'pictransfer light'). Install on both devices and launch on both devices. Follow the promt to get a bluetooth sync.
3. Double push the home button both devices to pull up the multi-tasking and open keynote and keynote remote on the relevant devices.
4. In keynote, go to settings; advances; remote. You should now be able to get the remote to link (you may, on the device running the remote, need to hit settings and then 'new keynote link'.
Once I launched pictransfer, the bluetooth logo was blue on both devices the whole time I ran through the other steps. I suspect that that was also the point of using the hotspot service.
Also noteworthy: I am yet to try this 'in the field'. For all I know, this won't keep a connection for as long as one might need. I'll find out on Thursday when I rely on the remote for 90min. On the positive side, I was able to keep the connection even when I double clicked home and closed pictransfer while leaving keynote and keynote remote open...
This work-around worked -- I found that as long as I launched the "Pictransfer for iPad Lite" app just before the presentation that it seemed to work fine. However, if Bluetooth gets turned off or you disconnect I think you will have to repeat the work-around -- nice find.
Apple really needs to fix this. They even have a posted document describing how to link two devices by Bluetooth and the truth is that it just does not work as they say. They need to add whatever code into the Keynote & Keynote Remote apps to initiate bluetooth to connect the devices. It's fine if it prefers WiFi, but it should give you the bluetooth option as well.

IOS 8.3 bluetooth bug...ugh!!!

So, Apple has done it again with iOS 8.3. I am an aircraft pilot. EVERYTHING I do is on my iPad. I just recently updated to iOS 8.3. Well, I went to take a flight yesterday, and my bluetooth GPS antenna would not connect. (yes, I have paper charts...but it's no fun trying to fly that way.) After 3 reboots, several forget device/connect to device...I got nowhere. Well, I didn't fly that day. However I managed to waste a lot of time going out to the airport, preflighting the airplane, and driving back home that day. I know this sounds like "new world problems". But aren't apple products supposed to "just work"?
Well, I got back home last night and found warnings posted all over every aviation webpage/blog/forum about this bug. It has been confirmed by several companies techies and they have ALL stated that this is an Apple error. Apple has also confirmed this.
sources...
https://seattleavionics.wordpress.com/2015/04/14/ios-8-3-problem-with-bluetooth- gps-and-ads-b-receivers/
http://bad-elf.com/blogs/bad-elf/18013536-alert-compatibility-issue-with-apple-i os-8-3-and-external-gps-receivers
I am now looking for solutions.... Some have downgraded their iPads back to 8.2. I really don't want to have to do this. But many people have blogged that the iOS 8.4 Beta does not fix the issue either. Thanks Apple....
I have all Apple products, and have been an ALL Apple consumer for the past 10 years. But this is unacceptable. Oh , by the way, all the pilots with Android devices are still flying without issue. I never thought I would EVER say this... But if this issue is not fixed VERY soon, I will be shopping for a new android device. I do NOT relish this thought, but every day with the iOS 8.3 bluetooth bug, is a day that I CAN'T FLY WITH GPS!!!!
I am sure other venues besides aviation are affected by this.... Any other solutions or rumors from the community are greatly appreciated.
Frustrated pilot.

Philly_Phan wrote:
firemediclex wrote:
...this is an Apple error. Apple has also confirmed this.
Where was that confirmation?
By the way, my BT is working just fine with 8.3
Last sentence of the second paragraph of this link...
https://seattleavionics.wordpress.com/2015/04/14/ios-8-3-problem-with-bluetooth- gps-and-ads-b-receivers/
"Apple has noted that they’re aware of the problem and have put a high priority on fixing it but have not announced a specific timeframe."

IOS 8 & Bose Bluetooth

I have an iPhone 5s & Bose Bluetooth headset. Before upgrading to iOS 8 & 8.0.2, I could answer a call on my headset by turning it on and the call would be routed to the headset. Now, in iOS 8.0.2, when I turn my headset on to answer, the call is answered, but routed to my phone. I actually have to go to the phone and choose the Bose headset. Once the headset is chosen, everything acts as expected. If I were to leave the headset on and take the call via the device, it also acts as expected.
This is obviously a bug. Any ideas if this is being addressed in the updates?

Same problem for me (using headset Jabra BT2050 with iPhone6 iOS 8) ... still present with iOS 8.1.3
It's not a bluetooth pairing issue and the only workaround I found is this below
- Setting/General/Accessibility/Call Audio Routing (set Headset, instead of Automatic)
but in this way it uses headset (if connected) even if you answer sliding the iPhone
That's quite incredible from Apple, while using the state of the art for device and iOS (the best iOS and iPhone ever)
I've reported the same issue here
iOS 8 and bluetooth headset call answer issue

Anyone else still having iOS 8.1 Bluetooth Connection issues.

Hi there just wanted to see if anyone is still having the Vehicle "Hands Free" Connection issues via Bluetooth on the iPhone 6? I drive a 2009 Acura TL and I am still having the connection issue. Oddly enough before the 8.1 update I was running 8.0.2 and it worked fine. Now when I get in my car and the phone connects it cripples the entire system. It won't allow me to change to the USB mode for my connected iPod and when I try to place a call via the "Hands Free" system it beeps as if it is activating and then does nothing.
I have tried everything that I can think of with no results. I was hoping there was someone out there with the same car or similar having the same problem that might have found a fix. Chime in and let me know.

I am having similar problems with Bluetooth connectivity but not with a car. I use a Planatronics Legend. Everytime that a call comes in, my Legend announces the call then immediately disconnects from my iPhone. All of this started after upgrading to ios 8.1.
Apple should not advertise fixes to problems without truly confirming the repairs.

Serious problem with bluetooth after upgrade to iOS6.1

After upgrading to iOS 6.1 I have found serious problems with bluetooth, now I can not see the other iphone and vice versa.
Someone has the same problem?
Why Apple continues to restrict bluetooth functions?

Hi,
Thanks for your answer. Yes I've checked parameters modification and SPICBOOKING is "well" launched but it produces no results, so I guess there are some other changes in dimension customizing of AccountL or Datasrc....by the moment I'm testing but with no luck. This happens when you are about to go live and decide to upgrade your system....

I Have A Problem with Bluetooth connection between my I-Phone and Bluetooth in my auto

I have a problem with bluetooth conection between my auto (2013 Buick) And I-phone 5. I can call out but am unable to recieve incomming calls.When I attempt to answer ,Everthing disconnects and the phone call goes to mail automatically.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IOS 7 GM Bluetooth say connected but does not play.

I've been using iOS 7 and bluetooth stereo on my iPhone says connected to my Pioneer stereo, but nothing plays, The stereo also says not connected. Has anyone had this bug? I hope apple fixes this before official release because my Nexus 4 connects perfectly. It's an iOS issue.

Had the same problem connecteing with USB to my stereo.
it was suggested I do this by user lllaass
<Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.>
And it worked for me.

I have problem with Bluetooth on my Qosmio G20

Hi
I have problem with Bluetooth.
I cannot use it because it is always off.
(Why Bluetooth Settings reports "Bluetooth is not Ready.")
I gone to Pro.Center in our area and he side (you delete your .. Definition of the Bluetooth!
But how!!!
whatever
How I get a new Definition of the Bluetooth?
Is that possible?
Please help me ... and learn me about all the Bluetooth things...
My pc is (TOSHIBA Qosmio G20)
I am waiting...

You should have a look at:
http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html

Problem with Excel output format

Hi Guys,
I am creating a report in XML Publisher (not standalone). I am facing some problems could anyone please help me to figure out the issues.
Is it possible to have all three output format (PDF, HTML & EXCEL) exact (same aligned) only by creating a single RTF Template? I am facing the problem with Excel output format the output format of excel is taking excels cell formatting.
Example Numeric fields --> Right Aligned, text fields --> Left Aligned
One more issue with excel is -ve(negative) values are getting displayed in red and in brackets like ($13) (with red color).
Our client want excel output on priority.
Is there any limitation for excel output format of reports?
It is very urgent for us please help.
Any help would be highly appreciated.
Thanks,
Pragati
Edited by: user11237443 on Aug 27, 2009 1:22 AM

Hi Mahi,
Thanks for your response. But i could not understand how can we write wrapper program could you please give some light on this or provide some link it would be helpful for me:-)
I have read that blog for excel limitations but i have more question?
1) What about the negative values?
if any field is displaying negative amount then excel not displaying right value for that:(
2)How can we align header or data?
Do XMLP with EBS provide any solution for formatting in excel?
3) If for the alignment of numeric value we concatenate them with any special character then how can we perform calculation that field?
Here are so many formatting issues do we need to write any code in xml for that?
Please help.
Many Thanks,
Pragati

Some of my songs in iPad Mini with RD disappeared all the sudden and I need to redownload it again. Same thing happen to my iPod touch 5 too. What's wrong with it? Is it the iOS problem?

Some of my songs in iPad Mini with RD disappeared all the sudden and I need to redownload it again. Same thing happen to my iPod touch 5 too. What's wrong with it? Is it the iOS problem?

Delete the music in your iTunes library, then go to iTunes store, Quick Link, 'Purchased' to redownload again.

Problem with RTPExport output video files

Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

Trubka wrote:
When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

Nokia n80 problem with bluetooth

hello all
i have an n80 which i have given to my mother.
there seems to be a problem with bluetooth. i can connect it to my laptop by bluetooth and use the connection to browse the phone and transfer files but for some reason when i try to sync with outlook the connection always fails, all the time, no matter what.
can anyone think of any reason for this?
i have tried looking for firmware updates as i havent used the handset for 18mths but i cant find the pc cable so it wont identify the phone when i run a search.
any suggestions (apart from find the cable!) will be appreciated

Not being technically qualified enough on specifications of Bluetooth 3 all I can say is that Bluetooth SDP = Service Discovery Protocol seems to be absent fron N8, whereas it is present on say 5800XM and N97 Mini which appear to behave faultlessly with Toyota Bluetooth unit if this sheds any light.
Happy to have helped forum with a Support Ratio = 42.5

IOS 7 PROBLEM OF BLUETOOTH OUTPUT..

Similar Messages

Maybe you are looking for