Ios 7 selection area instead of swipe

HI Everyone,
Somehow my iPhone 5, running iOS7, now has a selection bar showing up instead of simply swiping or tapping an area. I haven't a clue how this was envoked, nor have I found a way to turn this off. I've tried rebooting the phone, but no lock.
I'm assumiing this is some sort of accessability function. I can work my way to settings, but cannot get the phone to scroll down to other areas in the screen.
Any suggestions?
~Q

You can't go back. Why do you want to go back? 7.1 is much more stable then 7.0.6.
It's only very important since 7.0.6 and 7.1 that you are not giving every app access to GPS only the ones you trust and need (e.g Maps). Some bad apps (e.g. because of a bug which i had with an app called 'Scoupy') could still run in the background and could drain you battery although the app is closed. Also e.g. resetting you iPhone then doesn't help.

Similar Messages

  • How to capture a selected area on iphone 5s instead of a full screen capture?

    Just wonder, does anyone know how to screenshot of a selected area instead of a full screenshot on iphone?
    Thanks.

    you can use the iphones default photo app.open photos app in you phone, go to the picture and click edit on the top right corner, the options are listed below

  • CS6 Photoshop fails to print selected area

    PS fails to Print Selected Area, instead it prints an area smaller than the one selected, and it does not center the image on the paper. How can I fix this? The details: image size is 20x24 in. and my selected area is 10x12 in. I am printing to a 13x19 sheet of paper. The image size as printed is 6-5/16 x 9-1/8 in. instead of 10x12, and my selected area is cropped -- unless I check Scale to Fit Print Media but even then the printed image is still the wrong 6-5/16 size. Finally, the visualization is accurate: what is shown in Print dialog is what printed and instead of centering it as requested, the image is printed in the location as displayed. See attached screen shots.

    Ask in the PS forum, but as far as I can tell this is a specific Mac-only genuine bug. That being so, duplicate the image and do a "hard" crop for printing.
    Mylenium

  • Selection Area in an OpenGL GLAnimCanvas

    Hi,
    I need to make an selection area by clicking and draging with the mouse. I have an GLAnimCanvas (Open GL canvas object) that is inherited from java.awt.Canvas.
    I have an addMouseMotionListener() and an addMouseListener() that detects correctly the events on the GLAnimCanvas... But I don't know how to display the rectangle of the selection area dragging with the mouse...
    I tried with the example I found on the sun site (http://java.sun.com/docs/books/tutorial/uiswing/painting/overview.html#repaint)
    but it seems that there is a problem with the paintComponent(Graphics g) method...
    Is there anybody who has an idea ??
    Thank you in advance
    Mat

    You may want to use openGL calls instead of
    java.awt.Graphics otherwise you would lose hardware
    acceleration for drawing the box. These calls would
    be made within gl4java's GLAnimCanvas display()
    method. Basically, if your GLAnimCanvas implements
    MouseListener and MouseMotionListener you can change
    the box coordinates within the appropriate method
    (e.g. mouseDragged, mousePressed) and have the box
    rendering code within display()Not necessarily. Java2D is accelerated in version 1.4

  • HT5052 how to download ios 5.0.1 instead of ios 5.1?

    how to download ios 5.0.1 instead of ios 5.1?

    If you are past 5.1, there's a good chance you can't go back.
    If you're on 5.0 or before, you will need to place your phone in DFU mode, get a manual copy of iOS 5.0.1 for your phone (correct model), and install it by holding down Shift (Windows) or Option (Mac) when restoring your phone in iTunes. It will prompt you for the specified .ipsw file.

  • Automation: Howto move the selected area to another place in the same channel

    Dear Forum members,
    in my automation plugin i want to move some area from an alpha channel to somewhere else in the same alpha channel. As a user i select an area, call the move tool (the v key) and move it to the destination. Listener.log tells me that this is an ' eventCut' with some parameters. I clean-up the code a little bit and get this:
    >
    SPErr MoveSelection (double DistanceX, double DistanceY)
    PIActionDescriptor descriptor = NULL;
    PIActionReference reference = NULL;
    PIActionDescriptor descriptor2 = NULL;
    PIActionDescriptor result = NULL;
    SPErr error = kSPNoError;
    error = sPSActionDescriptor->Make (&descriptor);
    if (error) goto returnError;
    error = sPSActionReference->Make (&reference);
    if (error) goto returnError;
    error = sPSActionReference->PutProperty (reference, classChannel, keySelection);
    if (error) goto returnError;
    error = sPSActionDescriptor->PutReference (descriptor, keyNull, reference);
    if (error) goto returnError;
    error = sPSActionDescriptor->Make (&descriptor2);
    if (error) goto returnError;
    error = sPSActionDescriptor->PutUnitFloat (descriptor2, keyHorizontal, unitPixels, DistanceX);
    if (error) goto returnError;
    error = sPSActionDescriptor->PutUnitFloat (descriptor2, keyVertical, unitPixels, DistanceY);
    if (error) goto returnError;
    error = sPSActionDescriptor->PutObject (descriptor, keyTo, classOffset, descriptor2);
    if (error) goto returnError;
    error = sPSActionControl->Play (&result, eventCut, descriptor, plugInDialogSilent);
    if (error) goto returnError;
    returnError:
    if (result) sPSActionDescriptor->Free (result);
    if (descriptor) sPSActionDescriptor->Free (descriptor);
    if (descriptor2) sPSActionDescriptor->Free (descriptor2);
    if (reference) sPSActionReference->Free (reference);
    return error;
    This gives no error, it even removes the selected area from the document, but puts it in neverneverland, instead of moving it e.g. 100 pixels to the right (DistanceX == 100.0).
    What am i doing wrong ?
    Regards, Christof

    Dear Forum members,
    I had forgotten to select the correct channel, so please ignore my previous posting. The posted code is working as it should.
    Regards, Christof

  • There no lenses listed in the profile selection area. How do I fix this I use canon gear that should

    There no lenses listed in the profile selection area. How do I fix this I use canon gear that should be there. Help!

    There are different profiles for camera Raw, and for camera JPG - and LR filters the lenses list, to show only the profiles available for the particular image you have highlighted.
    If you have selected a JPG image, you will usually see a much shorter or even an empty list of lenses - as compared with what you see if you select a Raw image. Most lens profiles with interchangeable-lens systems, are designed to correct Raw images. On the other hand, if you select an image taken with (say) a compact digital camera or supported cameraphone, any support for that will usually be in JPG.
    You can get a free Lens downloader utility from the Adobe Labs website, which gives access to the full library of lens profiles that the general Adobe user community has uploaded. Each one listed, says whether it is for Raw or not. Some of these will have been generated by end users (using another free utility) and are of variable quality. But you may get lucky, and find just what you need. Or, if it is a rarer lens or if you have particular requirements, it is not so hard to make your own profile using the Adobe utility.
    You do not need to use a profile made specifically for your camera model. The only limitation is: a crop-sensor-generated profile, will not include the right optical coverage for a fullframe camera model.
    Another option is to "kludge" a copy of an existing Raw-only profile, so that it supports JPG instead. This just requires a text editor - you change a line within a structured-text file, from Camera Raw="True", to "False". Then you save that into the Lens Profile folder in the Adobe / CameraRaw area inside your user login's "application data" area.

  • Accumulated text within the attempted selection area is rotated other than horizontal or vertical

    I'm trying to see the properties of the font and am getting an error message.  "Accumulated text within the attempted selection area is rotated other than horizontal or vertical.  TouchUp cannot create a text selection."  How can I undo this?

    Hi Elisa0505,
    This problem can be solved by the following ways:
    1) Try opening the Content Navigation pane (left-hand side), in the pane fly-out turn on "Find Content fromSelection", select the text in question, and then delete/edit the text using the Content Pane instead of inside the Document Pane.
    2) Create a blank PDF that has the same dimensions as the original PDF. Just print a blank page from Word and change to landscape orientation. Select the object that contained the text that had given the error (it contained more than the text), cut it, and paste it into the blank PDF. Edit the text in new PDF. Then again cut and paste it back into the original document.
    3) In previous version of Acrobat, rotated text editing was not supported and hence the warning is appearing. But for normal text editing happens. This problem has been fixed in A11. So if you are trying to edit text which is other than horizontal or vertical, then those warnings are expected in Acrobat 10.
    Regards,
    Rave

  • Drag Selection Area implementation

    Hello,
    I'm trying to implement a "drag selection area"
    functionality, like a clipping style. Where user will draw a
    rectangle on top of a series of sprites, and that will perform an
    action to those sprited whitin the rectangle.
    I was wondering how it would be best to implment it? In
    terms of performance.
    I was thinking of using the .containsPoint() of the
    Rectangle, however, that means I have to do lots os calculations as
    my sprites are lines drawn all over the screen. So, calculating the
    intersection points for all lines would not be good...
    Is there a way to get the sprites or elements that are drawn
    "behind" the rectangle? since this lines are sprites and they are
    drawn before the rectangle I thought that will be a better way of
    getting the "selected" items?
    Marcela

    You may want to use openGL calls instead of
    java.awt.Graphics otherwise you would lose hardware
    acceleration for drawing the box. These calls would
    be made within gl4java's GLAnimCanvas display()
    method. Basically, if your GLAnimCanvas implements
    MouseListener and MouseMotionListener you can change
    the box coordinates within the appropriate method
    (e.g. mouseDragged, mousePressed) and have the box
    rendering code within display()Not necessarily. Java2D is accelerated in version 1.4

  • I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

    I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

    What do you mean a moderator

  • Updated iPad 2 last night.  All movies (9) on my iPad can no longer be viewed.  The movie plays but the photos and scene selection are blank. How do I fix this

    Updated iPad 2 last night.  All movies (9) on my iPad can no longer be viewed.  The movie plays but the photos and scene selection are blank. How do I fix this

    Quit the app and restart the iPad.
    In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Try the videos app again.

  • Sudden loss of print selected area in Photoshop 10.0.1?

    Between printing one image and printing the next I seem to have lost the ability to print a selected area in Photoshop 10.0.1. I am using this old program because the new Photoshop does not have that option. The box is now greyed out. Does any know why I could lose this, and what can I do to get it back? This is extremely important to my work method...
    Thank you.
    Mary Challinor

    Great news! "Print Selected Area" was restored in Photoshop CS6.
    Go to File > Print, scroll down in the dialog box that appears, et voila:

  • Adobe Acrobat 9 supposedly allows you to convert selected areas of a web page to PDF from within Int

    Software: Adobe Acrobat 9 Standard
    Issue: Using the ‘Adobe PDF toolbar’ from within Internet Explorer
    Problem #1:
    Can’t convert selected areas of a web page to PDF
    When you click ‘select’ on the adobe pdf toolbar, a red dotted line is supposed to appear around parts of the web page as you move the cursor
    In my case, that’s not happening
    Similarly, when you click on a part of the page, the part is supposed to be highlighted in blue
    In my case, that’s not happening
    Problem #2:
    Can’t convert part of a web page to PDF
    You’re supposed to use the cursor to select text and images on a page, then right-click and convert them to a PDF
    In my case, nothing happens when I right-click
    Any advice??

    You can not do that using Adobe Acrobat 9. Adobe never made a create PDF add-on for Firefox for use with Adobe Acrobat 9. They created a Firefox add-on for use with Acrobat X, but currently that one does not work with Firefox 4 though Adobe are working on an update.

  • [JS CS4] define a selection area

    Hi all,
    I have to isolate repetitive areas in documents of hundreds of pages. My intention is to select the items located in this area.
    I wrote a while ago a script to find an item at xy location but this time, x & y will always be different and I can't imagine trying to catch items randomly until the script finds something.
    So I thought that maybe I could mimic the selection arrow and drag a selection area from x1y1 to x2y2 to select what's inside that field. My first guess is that js is not enough to do that so I guess it's more c++ related but I am not even sure.
    Does someone have any clue on that ?
    TIA
    Loic

    Piece of cake, Loic.
    selectInRectangle (app.activeWindow.activePage, 5,10, 120,100);
    // Maybe x,y,wide,high would work better?
    function selectInRectangle (source, x1,y1, x2,y2)
         var it;
         app.select(null);
         for (it=0; it<source.pageItems.length; it++)
         //     Only select all inside:
              if (source.pageItems[it].geometricBounds[0] >= y1 &&
                   source.pageItems[it].geometricBounds[1] >= x1 &&
                   source.pageItems[it].geometricBounds[2] <= y2 &&
                   source.pageItems[it].geometricBounds[3] <= x2)
                   source.pageItems[it].select (SelectionOptions.ADD_TO);

  • In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

    In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

    Hmmm, I wonder if that window is hidden or off screen? Have you moved the pic window around to look under it?
    Might try this...
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions.
    Then move these files to the Desktop for now...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    /Users/YourUserName/Library/Preferences/com.apple.Preview.plist
    /Users/YourUserName/Library/Preferences/com.apple.Preview.bookmarks.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Maybe you are looking for