IOS 7 Separate Texts coming in from different numbers

Hello,
My wife my daughter and I all have iPhones. We are all running IOS7. My wife and I recieve both our own texts and the texts to my daughters number. The problem we are having is that if anyone texts my daughter it comes to me but looks like it is coming directly from that person.to m
Here's an example.
Today I was texting with my wife.
During our conversation she sent a text to my daughter. Since I receive texts to my daughter, I got this one as well. The issue is that it looks like it is coming from my wife to me. It actually goes right into the conversation that we were having. Needless to say the conversation got confusing for a couple minutes till we realized that these texts were getting mixed in.
So, here is my question. If have multile numbers chosen under Settings->Messages->Send & Receive, is there any way to seperate out the incoming messages so I know which number they are coming in to? And can I do this without having to create a new Apple ID?
I hope this makes sense to everyone.
Thanks in advance for any help.

Hi all,
Bit of background so I don't waste anyone's time:
IPhone 4s, itunes 11.1 (both on computer and iphone)
I too am stuck in this recovery loop. I've read all over the community and have tried the suggestions:
I put my phone in DFU mode & also recovery mode (a.e. hold home/sleep button down for 10 seconds, etc., etc., etc.) and tried restoring this way 10 different times, as some posts say it sometimes works after the 4-5 try but still no results.
On my Iphone Screen the apple logo appears and the status bar below it gets stuck about 2/3 of the way, then I get the following error message, "could not restore because of unknown error (1)".
I set up an appt. at the apple store for tomorrow, but holy sh*t what a fiasco!
Any suggestions?

Similar Messages

I Can't separate text in frames from repeating

CS4 Flash Pro v:10.0.2
Win 7 Pro
I have been working on a Flash site for a while - and learning quite a bit over the past 2 years. This is my first Flash design website and I can't see where I went wrong.
At some point last year I removed subsequent frames and began duplicating the text to show symetry. Now, my customer wants to add different information in the adjacent frames, but I can't remove the adjacent duplications.
Example:
Frame 6 has text-A (Sample X in the PDF Image below)
Frame 7 has text-A (Sample Y in the PDF Image below)
Now I want Frames 6 and 7 to have different text - unlinked in all frames, and the final tween frame.
When I edit either of the 8 Frames contents, the text changes for the adjacent frames. Luckily, the first 2 tweens contain separate information, so those are not linked to these last 2 (Sampe X and Y). How do I separate the frames so I can have different information, but I do want each Sample to contain the same text? I DO NOT want Sample X and Sample Y to mimic each other. Each tween is 4 frames in length, and each frame is duplicated. However, I want Sample X separate from Sample Y.

Rob, thanks for the promt response.
My example image identifies Sample X and Y as my current work. What I am referring to is that the text inside the movie clip of Sample X and Sample Y are identical. When I edit the text/content in the Movie Clip for Samply Y, it changes the text in X automatically. I want them to be separated, so the content in each movie clip is different.
If you visit the website http://www.playonkc.com/ and select Training, you can see the content. When you click on the + bubbles on the right, if pulls up each months training.
Somehow my .fla file contains linked months. So inside each movie clip, the text for months July/August & Sept/Nov are linked. When i edit the contents of one, the other changes. How do I separate them, so they are independent of each other like Feb/Mar & May/June.
It has to be either a Key Frame, or Frame edit, but when I just change the text contents of one frame, Flash automatically changes the text contents of the other Movie Clip (Sample X and Y below.) They are linked together somehow....

Missing "Charts, Images, Text Labels" demo from iWorks Numbers page.

Really just an issue with the number iWorks page on the website.
At the address below, Apple has a few watchable demos:
http://www.apple.com/iwork/numbers/
Intelligent Tables.
Flexible Canvas.
Charts, Images, Text Labels.
and
Interactive Print View.
But the hyperlink listed under "Charts, Images, Text Labels." is the same as the one under "Flexible Canvas."
Does anyone have the actual address that takes you to the "Charts, Images, Text Labels." demo?
for reference, here is the address that is duplicated:
http://movies.apple.com/movies/us/apple/mac/iwork/2007/features/iworkfeatures_flexiblemediarichcanvas_20070807640x400.mov
thanks!

The link below is now available from the iworks page:
http://movies.apple.com/movies/us/apple/mac/iwork/2007/features/iworkfeatures_2dand3dcharts_20070807640x400.mov
Thanks to who ever updated it.

5 to 7 robocalls each day from different numbers but same scam

I get about 5 to 7 calles every day from something called "Senior Services" or "Medic Alert" or similar. This has been going on for about a week now. No two phone numbers are the same, and searching with Google on some of them showed some aren't even valid (how did the website know? I assume invalid area code/exchange combination).
Examples are Senior Life {edited for privacy}, Med Alert Co {edited for privacy}, Senior Alert {edited for privacy}, and Dynamic Alert {edited for privacy}
Every one has the same recorded message, that I "won" a free medic alert device yada yada yada. A web search shows this is a scam common the last few months.
It is a bit of a pain to delete all the messages left by this robocaller, and I fear accidentally missing a real message from someone as a result.
I have my number on the do-not-call list and have reported a few of the instances to FCC, for what it's worth. It does no good to block the numbers as they are never used more than once.
Have we reached a point where phone calls coming from networks which Verizon can't verify the caller with certainty have to go through a voice "captcha" to connect?

First...all the phone numbers you entered have been automatically edited out by the forum software as a privacy protection policy so the best of idea--particularly as these are not personal phone numbers--is to run all the numbers together and then the forum software doesn't see it as a phone number and doesn't edit it out.
Unfortunately, as a new user you can't go and edit your original post--you have to post 5-6 times to be able to edit one of your own posts--to put the phone numbers run together back in but also, since I'm replying to your post, the forum software won't let you edit your original post even if you could.
Welcome to the land of Alice...'-}}
So...post a reply and in it run each phone number together if you'd like to show others these slimey phone numbers...
I've also received those same robocalls and they are really annoying--how totally stupid do these people think we are? Verizon Digital Voice does offer the option of blocking phone numbers however, it's limited to 10 numbers and you can't, for example, specify an entire area code or an area code-exchange combo. Some people have recommended getting a call blocker although they are a bit pricey at just under $100. It may depend on how aggravated you are as to whether you want to spend that kind of money but if you do, here's a link to a call blocker that has decent reviews:
http://www.amazon.com/electronics/dp/B009RVYEZ0

How I can I take my phone off Google talk so can stop getting this calls from different numbers that I don't know?

Anyone know?

I Had the same issue. I thought it was a virus. Turns out it's either my ebay or PayPal app. I noticed whenever an item was sold and or paid for on ebay, the cash register sound was made.

PDF to Excel Text comes across however NO numbers come across including postcodes in addresses

PDF to Excel I get the text coming across WITHOUT any numbers from columns This incudes numbers within addresses e.g. postcodes
I tried PDF to WORD and I get the same problem - I get text WITHOUT any numbers
Any help greatly appreciated

Hi,
Is it happening with a specific file or with every files?
Try to use different browser.
Regards,
Florence

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

Iphone 5 not getting text from new numbers?

im on ios 7.0.4. Recently, ive been having the problem of not getting messages from new numbers. I receive all texts and calls from all current phone numbers ive ever had contact with. But for the past month, any new numbers that text me first, i do not receive them. But if i text and or call them first, it works fine. Which isnt always a convinence. They sent me screen shots of my number and their text; they all have different phones on different services.

Perk123, this is a text messaging mystery! I'm on the case. I recommend that delete all unwanted text messages on your device and power it off/on to soft reset it.
You will also need to advise your friend that has the AT&T iPhone to reset the network on their device. This can be done by accessing Settings >General >Reset >Reset Network.
Lastly your friend needs to verify if your contact has been set up to block calls and text messages from your mobile number. This option is located in Contacts >your contact> Block this caller.
Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport

I have two cell phone, different numbers. Each has their own apple id. How can i merge them so apps on one show on the other but keep their emails addresses separate on their own phone?

Have two cell phones, different numbers. Each has their own apple id. How can I merge them so apps purchased on one phone show on the other. But.as each has their own email address, I want to keep these email addresses separate on their own phone? Thanks.

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

Only receive texts from certain numbers

Aside from having the absolute worst customer support of the various phone services I've used ( I was seriously on the phone for 45 minutes trying various ways to get through the machine to get to a customer service rep. Continuously said, "Sorry we couldn't help you, goodbye." or, "We couldn't connect your call". ) I can no longer receive texts from certain numbers.
I can send texts and people receive them. I can receive texts back from some of these people, however when others try to text me it goes instead to a random person. (Which seems to be the same person their texts are getting forwarded to each time. )
I've turned off the call forwarding with *73, I've updated my software, I've TRIED to get in touch with a customer service representative about my account, but that's seemingly impossible.
Offer me a suggestion or don't. This is my last month with Verizon no matter what. Inconvenience on top of inconvenience on top of inconvenience.

Having text message work properly is very important. I'm sorry you are having so many issues with your service and that you have not been able to contact customer service. You can reach us at *611 or 1-800-922-0204 and hit 0 to speak to a representative. You can also send us a private message with your name and phone number so that we can call you and take a look at the account in detail. What phone do you have and are you using a 3rd party text messaging application?
KinquanaH_VZW
Follow us on Twitter @vzwsupport

How can i redirect 5 choice options from a drop down list into 5 separate text fields?

I have a number of drop down lists which push one of 5 choices to a text field on another page.
I want to be able to push each choice from one drop down field to a separate field, so that it is not possible to duplicate the drop down choice.
The resulting page is going to be locked.
What script do I need to use to send each of the five choices specifically to five separate text fields?
Thanks for the insight.

Hi Paul,
I've had a look at the sample script you posted. I'm not sure how to make it work with the form I'm creating. (I sent it to you earlier.) Would you mind setting one of the fields up on my form so that I can get an idea of how to then push the choices set up on the "visible on screen only" to the textfields which are locked on the visible page? Do i lock the fields in the same way?
Will I need to create a new script for each of the arrays I'll be creating? for example, myScript1, myScript2, my Script3....
Why do i need a reset button?
Nellie

Dynamic link confusing two separate AE compositions in PPro from different projects

I am using CS5 Master Collection for Windows 7 (64 bit) on an HP Pro desktop (Intel core 2 duo, 6Gb RAM). The tower has two hard drives installed (no RAID). CS5 is installed on the original C drive along with the OS, but the working files, footage etc are all on the larger, secondary F drive.
I am working on a DVD project consisting of several seperate PPro projects. Each project has been colour corrected in AE using dynamic linking. Recently two of my projects suddenly became mixed up, by which I mean the video (not the audio) from one AE composition in one project has taken the place of another in another project. The clip remains the same length, but the link apears to be referencing the wrong clip during playback. Interestingly, there are two clips on the track above the affected clip that fade out and in at either end, during the dissolves between clips, the correct footage plays. It is only when the clip plays by itself that the problem occurs. The next clip also has the same error, though the problem only occurs for half the clip and then suddenly corrects itself. Just to be clear, All clips have been rendered, there are no more than two video tracks on the sequence, and I have tried replacing the composition from the asset menu (in which the clip plays back correctly), but the problem remains in the sequence.
I hope that descrition is clear enough. My guess is some kind of file path error in the dynamic link, perhaps due to the separate hard drive. But I really wouldn't know. I'm very pressed for time right now and I'd prefer not to go against workflow and re-edit a new composition in AE, I would also like to understand what is going on in case it happens again.
Any help with ths problem would be appreciated,
J

Thanks Colin, I tried what you suggested with both the AE Project that it should be referencing and the AE project it is erroneously referencing but both failed to fix the issue. Its as if a hidden clip were laid over the top of the one I want to play. Frustrating.
Date: Mon, 24 Oct 2011 19:47:03 -0600
From: [email protected]
To: [email protected]
Subject: Dynamic link confusing two separate AE compositions in PPro from different projects
    Re: Dynamic link confusing two separate AE compositions in PPro from different projects
    created by Colin Brougham in Premiere Pro CS5 & CS5.5 - View the full discussion
It's not the comps that are the problem; it's the project file names themselves. You can have all the comps in a project named the same thing, and it'll be fine, but naming projects incrementally is an issue. After Effects includes a versioning function (Save and Increment) that will create a new AE project file with a serial number, e.g. AE Project 01, AE Project 02, etc. This is all well and good if you're just working in After Effects, but Dynamic Link gets confused and will usually start looking at the later project file for comps. That will just create a big mess, as you've found. Changing the names of the project files won't help things relink automatically properly, but it can help you fix things. Make all your DL AE comps offline in your Pr projects, and name your AE projects in a manner that is not serial (give them more random names). Select your offline AE comps, and right-click > Link Media, and point to the new AE project. Things should link up correctly then--but if they don't, you'll just have to remove all the AE comps from your Pr project, reimport the comps from the newly-named AE project, and replace them. It's a pain but it'll probably just keep getting worse if you don't.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3988711#3988711
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3988711#3988711. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5 & CS5.5 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have two iPhones, 1 Apple ID can I have IMessage working from both different numbers? If so how?

I have two iPhones and need to use both with different numbers. I have one Apple ID, can I use iMessage on both phones with the different numbers? If so how

I have two apple phones too. One for work and my personal. When setting up your apple ID on the second phone under Messages settings -> Send & Receive -> you can select the other phone that has your apple ID. I haven't done it, bc need two separate phones. But i believe that sould work. Same on your Messages on you mac. But remember iMessages only works with Apple products. All your other buddies that don't have apple you won't get their sms, on the primary phone you want to use. Hope this helps

PDF file shows different numbers of text blocks in CC 2014 and CS6

Hi,
I've inherited a file at work that displays different numbers of text blocks, depending on the version of Acrobat used to view the file. Here's the specific issue:
As viewed in CC 2014:
"Chapter 1 - Chapter One Title": Appears as two text blocks -- one for "Chapter 1 - " and one for "Chapter One Title"
As viewed in CS 6:
"Chapter 1 - Chapter One Title": Appears as a single text block -- "Chapter 1 - Chapter One Title"
This occurs only with regard to single-digit chapter numbers that are whole numbers. So:
Chapter 1, Chapter 5, and Chapter 7 entries appear as two blocks in CC 2014, one block in CS6.
Chapter 2.0, Chapter 6.1, Chapter 10, entries appear in single blocks in both CC 2014 and CS6.
The PDF file was created -- I believe -- through the save-to-PDF feature in Word 2010.
Any idea what's happening here?
Thanks.
David

The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?
I change everything into +63 and i thought everything is already fine,.. and then now , i dont know what happened why it doesnt recognize numbers with +63 anymore

Hello hsielglad,
Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7. If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/HT5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M.

IOS 7 Separate Texts coming in from different numbers

Similar Messages

Maybe you are looking for