IOS 7 smtp problem - delays sending mail

Sending mail with IOS 7 seems to incur delays.
With a gmail account it takes on average 2 minutes to send mail to another gmail account. The delay from other clients seems to be around 30 sec.
With another mail account connecting to a private mail server (with SSL and port 587), the delay varies from 4 minutes to over 100 minutes, and the longer delays always occur when several test emails are sent in a short space of time.
These delays occur regardless of whether there is a 3G or wifi connection.
From what I read there is a lot of icloud stuff going on in IOS 7 and I suspect that this is the reason for the sending delays. I have an icloud account set up but the features are all disabled except for find my ipad.
I have two ipads and they both behave the same.
Grrrr. I have wasted so much time on this, including a very frustrating phone call to apple support who of course will not acknowledge there is an issue.

Do you have more than one mailbox syncing? Are you sure your in the all mailboxes view?

Similar Messages

Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send..

Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send Code 501..
Need help with T-bird.. My OS is Win XP-64..Have been using Mozilla for about 10 years with little or no problems.. This happened when I upgraded to 3.17.. Spent hours on T-Bird diagnostics web site.. Called Comcast & talked to a net tech.. he ran some tests on his end & had me log into my Comcast e-mail account & all worked well,, so he concluded the problem was in T-Bird.. He had me change my port to 587 & disable connection security & authentication to none & I was able to send mail.. That was all he could do.. Comcast was working.. the problem is in T-Bird.. Can any one help with this problem.. I don't want to send mail with my password transmitted insecurely..
Thanks
Richard

It was not intended to be "snide". You said two separate things that at face value would be out of the ordinary.
I considered if it might be a typo for 31.7. Since 31.5 is the current formal release, I would have to thank you for volunteering to test a pre-release beta version. If it was truly 3.1.7 then it would appear that you have chosen, or have become stuck with a somewhat ancient version. In either case it's harder to reach out to you with any meaningful comments or advice. However I do watch various other sites and newsgroups and I don't see a clamour of distressed users, so it seems fair to suppose that this feature isn't actually broken in 31.7.
And you said XP 64. XP is obsolete and no longer supported and if there is a 64-bit version, then again you have set yourself apart from the mainstream.
I had a look at the comcast site and found some puzzling recommendations. Some users come here asking how to set up a secured connection in Thunderbird when it isn't offered by the server. Comcast are different, in that they mention the ports 143 and 587, and also 993 and 465. So far so good, in that security is actually on offer, but they also suggest that you enable SSL, regardless of which port is being used. It would be unusual and unconventional to offer TLS or SSL on ports 143 and 587. STARTTLS would be more credible on these ports.
Have you tried IMAP on 993 and SMTP on 465? SMTP on 587 with SSL, or TLS, is not impossible, but is improbable.

Problem in sending mails to multiple persons

Hi,
I have a problem in sending mails to multiple people....
My mail is using the local smtp server...The mail is to be send to multiple addresses in to and cc.
for e.g the to address will have --> [email protected];[email protected]
cc address will have --> [email protected];[email protected]
How do this i.e set multiple to and cc address...
My function that sends mail from my ejb looks like this...
// create some properties and get the default Session
     Properties props = new Properties();
     props.put("mail.smtp.host", host);
     Session session = Session.getDefaultInstance(props, null);
     try{
     Message msg = new MimeMessage(session);
     msg.setFrom(new InternetAddress(from));
//I HAVE TO SET MULTIPLE "TO" ADDRESSES HERE INSTEAD OF JUST 1
     InternetAddress[] address = {new InternetAddress(to)};
     msg.setRecipients(Message.RecipientType.TO, address);
//I HAVE TO SET MULTIPLE "CC" ADDRESSES HERE INSTEAD OF JUST 1
InternetAddress[] addresscc = {new InternetAddress(cc)};
     msg.setRecipients(Message.RecipientType.CC, addresscc);
     msg.setSubject(msgSubj);
     msg.setSentDate(new java.util.Date());
     msg.setText(msgText);
     Transport.send(msg);
     }catch (MessagingException ex) {
System.out.println("\nException handling in javaMail.java :" + ex);
Please help me out with a solution!!!Thanks in advance.
Thanks
Rahul

Hi all,
Got the solution...
We have to use addRecipients method of the Message class to add as many receipts we want to set.
example: Message.addRecipients(type,address).
Thanks
Rahul

Problem in sending mail with the given code

package booodrive;
Some SMTP servers require a username and password authentication before you
can use their Server for Sending mail. This is most common with couple
of ISP's who provide SMTP Address to Send Mail.
This Program gives any example on how to do SMTP Authentication
(User and Password verification)
This is a free source code and is provided as it is without any warranties and
it can be used in any your code for free.
Author : Sudhir Ancha
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.io.*;
To use this program, change values for the following three constants,
    SMTP_HOST_NAME -- Has your SMTP Host Name
    SMTP_AUTH_USER -- Has your SMTP Authentication UserName
    SMTP_AUTH_PWD -- Has your SMTP Authentication Password
Next change values for fields
emailMsgTxt -- Message Text for the Email
emailSubjectTxt -- Subject for email
emailFromAddress -- Email Address whose name will appears as "from" address
Next change value for "emailList".
This String array has List of all Email Addresses to Email Email needs to be sent to.
Next to run the program, execute it as follows,
SendMailUsingAuthentication authProg = new SendMailUsingAuthentication();
public class SendMailUsingAuthentication
private static final String SMTP_HOST_NAME = "sample.com";
private static final String SMTP_AUTH_USER = "demo";
private static final String SMTP_AUTH_PWD = "demo";
private static final String emailMsgTxt      = "Online Order Confirmation Message. Also include the Tracking Number.";
private static final String emailSubjectTxt = "Order Confirmation Subject";
private static final String emailFromAddress = "[email protected]";
// Add List of Email address to who email needs to be sent to
private static final String[] emailList = {"[email protected]"};
public static void main(String args[]) throws Exception
    SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
    smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
    System.out.println("Sucessfully Sent mail to All Users");
public void postMail( String recipients[ ], String subject,
                            String message , String from) throws MessagingException
    boolean debug = false;
     //Set the host smtp address
     Properties props = new Properties();
     props.put("mail.smtp.host", SMTP_HOST_NAME);
     props.put("mail.smtp.auth", "true");
    Authenticator auth = new SMTPAuthenticator();
    Session session = Session.getDefaultInstance(props, auth);
    session.setDebug(debug);
    // create a message
    Message msg = new MimeMessage(session);
    // set the from and to address
    InternetAddress addressFrom = new InternetAddress(from);
    msg.setFrom(addressFrom);
    InternetAddress[] addressTo = new InternetAddress[recipients.length];
    for (int i = 0; i < recipients.length; i++)
        addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
* SimpleAuthenticator is used to do simple authentication
* when the SMTP server requires it.
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password);
package booodrive;
public class Test {
     public static void main(String args[]){
          SendMailUsingAuthentication authProg = new SendMailUsingAuthentication();
I am not able to send mail using the above given codes. Can anyone please help?
Rony
Edited by: RonyFederer on Aug 10, 2008 9:04 PM

Your first step is to diagnose the problem.
1. Does the code compile? If not, what error messages appear?
2. Does the code run? If not, what error messages appear? What's in the stack trace?
3. Does the code do what you expect it to do? If not, what are the differences?

Problem of sending mail with MTA

Hi,
I have installed Sun Messaging Server, but I have a problem to send mail to other SMTP server over internet, like gmail, hotmail... So I have tried to send an email using javamail and I get this exception "530 5.7.1 Relaying not allowed", that mean that I don't have a Relay SMTP to routing the messages. But the idea that I have, is that the MTA installed with Messaging Server play the role of SMTP Relay.
So this idea is true, so I think is can be I problem of configuration, and I need to have may own SMTP Relay and don't using ISP Relay.
and I thank you for your help,
Mabrouk.

GS1-Tunisia wrote:
21-Nov-2008 17:32:31.58 tcp_local Q 1 [email protected] rfc822;[email protected] [email protected] TCP active open: Failed connect() Error: Connection timed out
This indicates that Messaging Server is unable to connect to the yahoo mail servers.
I have configured my server to use mydomain.com with ip 41.x.x.xHow did you configure your server to achieve this -- what settings did you add/change?
but when I see this log [email protected] is converted to [email protected] and 192.168.3.2 is mailhost which is behind firewall in DMZ, So it may be the problem of NAT, I don't know!!!
Given that Messaging Server cannot connect to the yahoo mail servers, the problem appears to be at the networking level so the firewall is most likely blocking the outgoing port 25 connection.
When you are on the Messaging Server system, what output do you get for the following command:
telnet a.mx.mail.yahoo.com. 25Regards,
Shane.

Problem with sending mail throgh java mail api

hi folks,
We are having problem regarding sending mail using java mail api.
we are using msgsendsample.java file from demo folder contained in javamail-1.3.3_01 folder.
we are using following command at dos prompt.:
java msgsendsample [email protected] [email protected] smtp.mail.yahoo.com false
It gives following Exception:
--Exception handling in msgsendsample.java
com.sun.mail.smtp.SMTPSendFailedException: 530 authentication required - for hel
p go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1
333) at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:906)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:535)
at javax.mail.Transport.send0(Transport.java:151)
at javax.mail.Transport.send(Transport.java:80)
at msgsendsample.main(msgsendsample.java:93)
** ValidUnsent Addresses
[email protected]
Thanking in Advance...
Please give us guidance to any alternate solution if exists.

hi
the smtp server u are using should allow u to send mail to other smtp server like if u r sending mail to yahoo account u have to use yahoo smtp server only .....
bye

My tedious problem in send mail

Hi all.
Can anyone help me to solve my tedious mail problem?
I write below code to send mail via smtp.
when i send mail to an email in our domain,its correctly send!
But when I send to other domains such as yahoo,its can not be delivered!!
I set debug option to true and see that both debug values is equal!!!
I go to our web mail client and send an email to yahoo,its successfully delivered.that is there isn't any relay problem in our mail server.
send mail code for yahoo email:
Properties prop = new Properties();
prop.setProperty("mail.transport.protocol","smtp");
prop.setProperty("mail.smtp.host",mailServer);
prop.setProperty("mail.smtp.port","25");
prop.put("mail.smtp.auth", "true");
Session mailSession = Session.getDefaultInstance(prop,new MailAuthenticator());
Message msg = new MimeMessage(mailSession);
mailSession.setDebug(true);
msg.setFrom(new InternetAddress(webMaster));
msg.setRecipient(Message.RecipientType.TO,new InternetAddress(this.UserName));
msg.setSubject("Hello");
msg.setText(text);
Transport.send(msg);
This is debug result :
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: useEhlo true, useAuth true
DEBUG: SMTPTransport trying to connect to host "sina.tums.ac.ir", port 25
DEBUG SMTP RCVD: 220 sina.tums.ac.ir ESMTP Sendmail 8.12.10/8.12.10; Tue, 11 Apr 2006 16:30:47 +0430
DEBUG: SMTPTransport connected to host "sina.tums.ac.ir", port: 25
DEBUG SMTP SENT: EHLO statistic
DEBUG SMTP RCVD: 250-sina.tums.ac.ir Hello congress.tums.ac.ir [194.225.62.87], pleased to meet you
250-ENHANCEDSTATUSCODES
250-PIPELINING
250-8BITMIME
250-SIZE
250-DSN
250-AUTH DIGEST-MD5 CRAM-MD5
250-DELIVERBY
250 HELP
DEBUG SMTP Found extension "ENHANCEDSTATUSCODES", arg ""
DEBUG SMTP Found extension "PIPELINING", arg ""
DEBUG SMTP Found extension "8BITMIME", arg ""
DEBUG SMTP Found extension "SIZE", arg ""
DEBUG SMTP Found extension "DSN", arg ""
DEBUG SMTP Found extension "AUTH", arg "DIGEST-MD5 CRAM-MD5"
DEBUG SMTP Found extension "DELIVERBY", arg ""
DEBUG SMTP Found extension "HELP", arg ""
DEBUG SMTP: Attempt to authenticate
DEBUG SMTP: use8bit false
DEBUG SMTP SENT: MAIL FROM:<[email protected]>
DEBUG SMTP RCVD: 250 2.1.0 <[email protected]>... Sender ok
DEBUG SMTP SENT: RCPT TO:<[email protected]>
DEBUG SMTP RCVD: 250 2.1.5 <[email protected]>... Recipient ok
Verified Addresses
[email protected]
DEBUG SMTP SENT: DATA
DEBUG SMTP RCVD: 354 Enter mail, end with "." on a line by itself
DEBUG SMTP SENT:
DEBUG SMTP RCVD: 250 2.0.0 k3BC0lRu032458 Message accepted for delivery
DEBUG SMTP SENT: QUIT

I find new data in my problem.I tested program to send email to other mail servers such as gmail.I saw that mail successfully delivered.
Then I back to yahoo and saw that my emails was stored in balk messages!
Apparently yahoo detect my emails as spam and store them in balk section.

Problem in sending mail from VF03

Hi
I am just getting a problem in sending mail to the recipient from script.
please find the below code and let me know why there is no data in otf_tab table.
DATA: otf_tab TYPE TABLE OF itcoo WITH HEADER LINE.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = i_itcpp
    TABLES
      otfdata = otf_tab
    EXCEPTIONS
      OTHERS = 1.
IF otf_tab[] IS NOT INITIAL.
      TRY.
          CREATE OBJECT mailer
            EXPORTING
              i_nast = nast.
     mailer->get_mail_address( EXPORTING i_adrnr = vbdkr-adrnr ).
          mailer->get_mail_address( EXPORTING i_adrnr = vbdkr-adrnr
                                                 i_vkorg = vbdkr-vkorg
                                                i_vtweg = vbdkr-vtweg ).
        zcl_sd_mail_output=>convert_otf_to_pdf( IMPORTING pdf_xstring =
        gv_pdf_string
                                                CHANGING otf_table   =
                                                otf_tab[] ).
          mailer->build_and_send_email( EXPORTING pdf_xstring =
          gv_pdf_string ).
        CATCH zcx_sd_mail_no_mailid INTO error.
          error_txt = error->get_text( ).
          zcl_sd_mail_output=>protocol_update( msg_id = 'VN'
                                               msg_nr = '902'
                                               msg_ty = 'E'
                                               msg_v1 = error_txt ).
          retcode = 1.
          CLEAR error_txt.
      ENDTRY.
    ENDIF.
Since my OTf_tab is initial i am unable to send mails.

Hi,
If the OTF Data table is blank then you might have missed the parameter "GETOTFDATA" at the time of calling "OPEN_FORM". Please pass field TDGETOTF = "X" in paramter "OPTIONS" when you are calling "OPEN_FORM".
You can also visit this link for more information.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/49e15474-0e01-0010-9cba-e62df8244556?QuickLink=index&overridelayout=true
Cheers,

Problem in sending mail

Hi all,
I'm having some problem in sending mail. I did all configuration regarding this. After that when i tried to send mail, its giving some error, tht is, "SendMailService is not available".
Can anybody help me on this.
Thanks,
Raj

Hi Raj,
Go to System Administrator > System Configuration > Knowledge Management > Content Management > Global Services > Mailing Service and make active option true, then restart your portal. Hope it'll work fine.
Regards,
Ganpati Jha

Problem in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

PROBLEM IN SENDING MAIL TO POSITIONS THROUGH SEND MAIL STEP

Hi Experts,
I am facing some problems in sending mail to positions from the organization structure from the send mail step.When I am using user as the recipient type it is working fine...but when i am choosing S position as the recipient type it is giving the error in the workflow log stating that method SENDTASKDESCRIPTION cannot be executed.
I need to find a solution urgently...any suggestion would be sincerely appreciated.
thanks.
Narsingh

Well you have probably tried this.. but just a recheck.
1 . send email setep select Organizational Object
2. Recipient Type Organizational Unit
3. Here do an F4 and then select the Unit...
Try this SAP behaves weirdly at times...
after this do Refresh Buffers.. and Org Unit...
Let us know if this works

Problem in sending mail from REPORT BUILDER...HELP ...PLS ....URGENT

Hi All,
I added the mailserver part in the rwbuilder.conf file.This is how it looks
<pluginParam name="mailServer">smtp.xxx.com</pluginParam>
The smtp server of our company is working fine.
Now when i am sending mail frm report builder i am getting the error.
Pls tell me .....
Do i have to configure any other file?
Should the smtp server be running in my local machine?WHAT IS THE SOLUTION ...FOR THIS PROBLEM?
Please someone give me some guidance..
regards,
ashok

Hi,
Pls give some idea ......
your reply will be greatly appreciated.
regards,
ashok

Problem to send mails

I've installed the OCS R1 Singlebox on a windows 2000 server.
But now I have the problem to send Email. The "Mailer-Daemon" send me the following message back.
Von: "Mail Delivery Subsystem" <[email protected]>
An: <[email protected]>
Cc:
Betreff: Could not deliver mail: see transcript for details
Datum: Nov 12, 2003 11:17 PM
Priorit�t: NORMAL
Mime-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status; BOUNDARY="----ORCL_ES6_BOUNCE_1062----"
Anh�nge:
----- The following addresses had delivery problems -----<[email protected]> (unrecoverable error)
From: "Mail Delivery Subsystem" <[email protected]>To: [email protected]: 1.0Content-Type: multipart/report; report-type=delivery-status; BOUNDARY="----ORCL_ES6_BOUNCE_1062----"Date: Thu, 13 Nov 2003 00:17:05 +0200Subject: Could not deliver mail: see transcript for details------ORCL_ES6_BOUNCE_1062----Content-Type: text/plain ----- The following addresses had delivery problems -----<[email protected]> (unrecoverable error)------ORCL_ES6_BOUNCE_1062----Content-Type: message/delivery-statusReporting-MTA: dns; server1-hecht.hecht.comReceived-From-MTA: DNS; server1-hecht.hecht.comFinal-Recipient: RFC822; [email protected]: failedStatus: 5.0.1Diagnostic-Code: SMTP; 501 5.5.4 Invalid AddressRemote-MTA: DNS; bluewin.chLast-Attempt-Date: Thu, 13 Nov 2003 00:17:05 +0200------ORCL_ES6_BOUNCE_1062----Content-Type: message/rfc822Return-Path: <[email protected]>Received: from server1-hecht.hecht.com by server1-hecht.hecht.com with ESMTP id 10621068678981; Thu, 13 Nov 2003 00:16:21 +0200Message-ID: <2076777.1068678981559.JavaMail.SYSTEM@server1-hecht>Date: Thu, 13 Nov 2003 00:16:21 +0100 (CET)From: [email protected]: [email protected]: Mime-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: quoted-printableX-Priority: 3X-Mailer: Oracle Webmail Client(UIX)------ORCL_ES6_BOUNCE_1062------
Please help me
Thanks

u should configer the relay server in the smtp_out on the um_messageing

Problem in sending mail using java mail api

This is the pogram I am using as of now to send a mail to yahoo id.
import javax.mail.*;
import javax.mail.internet.*;
public class SendingMail2
public SendingMail2()
try
String from = "ravikiran_sunrays";
String to = "[email protected]";
String subject = "the subject u wanna send ";
String cc="[email protected]";
String bcc="[email protected]";
String text="the matter that u wanna send ";
java.util.Properties prop = System.getProperties();
prop.put("mail.smtp.host","mail.yahoo.com");
//prop.put("http.proxyHost",System.getProperty("http.proxyHost"));
//prop.put("http.proxyPort","8080");
//prop.put("http.proxyPort",System.getProperty("http.proxyPort"));
//prop.put("http.proxyHost","172.19.48.201");
//System.getProperties().setProperty("http.proxyPort","8080");
//System.getProperties().setProperty("http.proxyHost","172.19.48.201");
Session ses = Session.getInstance(prop,null);
MimeMessage message = new MimeMessage(ses);
try
Address fromAddress = new InternetAddress(from);
message.setFrom(fromAddress);
message.setSubject(subject);
Address[] toAddress = InternetAddress.parse(to);
Address[] cc_address=InternetAddress.parse(cc);
Address[] bcc_address=InternetAddress.parse(bcc);
message.setRecipients(Message.RecipientType.TO,toAddress);
message.setRecipients(Message.RecipientType.CC,cc_address);
message.setRecipients(Message.RecipientType.BCC,bcc_address);
message.setSentDate(new java.util.Date());
message.setText(text);
Transport.send(message);
System.out.println("Mail Successfully Sent");
catch(Exception e)
System.out.println("Problem " + e);
catch(Exception e)
System.out.println("Problem " + e);
public static void main(String[] args)
SendingMail2 sendingMail2 = new SendingMail2();
This is the exception I am getting when I try 2 execute that program.
avax.mail.SendFailedException: Sending failed;
nested exception is:
javax.mail.MessagingException: Unknown SMTP host: mail.yahoo.com;
nested exception is:
java.net.UnknownHostException: mail.yahoo.com

listen buddy
this is a class i made it is easy to understand it sends mails and check inbox just adduser from telnet with remote manager in james create the three accounts i am using and then use this class and its methods
also the next class that contains the mails test my class and what i am saying
import java.io.*;
import java.util.*;
import javax.mail.*;
import javax.mail.internet.*;
public class MailClient
extends Authenticator
public static final int SHOW_MESSAGES = 1;
public static final int CLEAR_MESSAGES = 2;
public static final int SHOW_AND_CLEAR =
SHOW_MESSAGES + CLEAR_MESSAGES;
protected String from;
protected Session session;
protected PasswordAuthentication authentication;
public MailClient(String user, String host)
this(user, host, false);
public MailClient(String user, String host, boolean debug)
from = user + '@' + host;
authentication = new PasswordAuthentication(user, user);
Properties props = new Properties();
props.put("mail.user", user);
props.put("mail.host", host);
props.put("mail.debug", debug ? "true" : "false");
props.put("mail.store.protocol", "pop3");
props.put("mail.transport.protocol", "smtp");
session = Session.getInstance(props, this);
public PasswordAuthentication getPasswordAuthentication()
return authentication;
public void sendMessage(
String to, String subject, String content)
throws MessagingException
System.out.println("SENDING message from " + from + " to " + to);
System.out.println();
MimeMessage msg = new MimeMessage(session);
msg.addRecipients(Message.RecipientType.TO, to);
msg.setSubject(subject);
msg.setText(content);
Transport.send(msg);
public void checkInbox(int mode)
throws MessagingException, IOException
if (mode == 0) return;
boolean show = (mode & SHOW_MESSAGES) > 0;
boolean clear = (mode & CLEAR_MESSAGES) > 0;
String action =
(show ? "Show" : "") +
(show && clear ? " and " : "") +
(clear ? "Clear" : "");
System.out.println(action + " INBOX for " + from);
Store store = session.getStore();
store.connect();
Folder root = store.getDefaultFolder();
Folder inbox = root.getFolder("inbox");
inbox.open(Folder.READ_WRITE);
Message[] msgs = inbox.getMessages();
if (msgs.length == 0 && show)
System.out.println("No messages in inbox");
for (int i = 0; i < msgs.length; i++)
MimeMessage msg = (MimeMessage)msgs;
if (show)
System.out.println(" From: " + msg.getFrom()[0]);
System.out.println(" Subject: " + msg.getSubject());
System.out.println(" Content: " + msg.getContent());
if (clear)
msg.setFlag(Flags.Flag.DELETED, true);
inbox.close(true);
store.close();
System.out.println();
====================================
testing this class
=======================================
public class JamesConfigTest
public static void main(String[] args)
throws Exception
// CREATE CLIENT INSTANCES
MailClient redClient = new MailClient("red", "localhost");
MailClient greenClient = new MailClient("green", "localhost");
MailClient blueClient = new MailClient("blue", "localhost");
// CLEAR EVERYBODY'S INBOX
redClient.checkInbox(MailClient.CLEAR_MESSAGES);
greenClient.checkInbox(MailClient.CLEAR_MESSAGES);
blueClient.checkInbox(MailClient.CLEAR_MESSAGES);
Thread.sleep(500); // Let the server catch up
// SEND A COUPLE OF MESSAGES TO BLUE (FROM RED AND GREEN)
redClient.sendMessage(
"blue@localhost",
"Testing blue from red",
"This is a test message");
greenClient.sendMessage(
"blue@localhost",
"Testing blue from green",
"This is a test message");
Thread.sleep(500); // Let the server catch up
// LIST MESSAGES FOR BLUE (EXPECT MESSAGES FROM RED AND GREEN)
blueClient.checkInbox(MailClient.SHOW_AND_CLEAR);
=======================================================
it suppose to print this
Clear INBOX for red@localhost
Clear INBOX for green@localhost
Clear INBOX for blue@localhost
SENDING message from red@localhost to blue@localhost
SENDING message from green@localhost to blue@localhost
Show and Clear INBOX for blue@localhost
From: green@localhost
Subject: Testing blue from green
Content: This is a test message
From: red@localhost
Subject: Testing blue from red
Content: This is a test message
thanks a lot
but i need ur help plzzzzzzzzzzzz
i can create account from telnet
but how i can create a new account from java .. a jsp page that i made to create a new account on the server
plzzzzzzzz help me
bye

Java Session problem while sending mail(using javamail) using Pl/SQL

Hello ...
i am using Java stored procedure to send mail. but i'm getting java session problem. means only once i can execute that procedure
pls any help.

props.put("smtp.gmail.com",host);I doubt javamail recognizes the 'smtp.gmail.com' property. I think it expects 'mail.host'. Of course since it cannot find a specified howt it assumes by default localhost
Please format your code when you post the next time, there is a nice 'code' button above the post area.
Mike

IOS 7 smtp problem - delays sending mail

Similar Messages

Maybe you are looking for