IOS 7 updates have lowered my bluetooth maximum volume. Is there a fix for this?

I am using an iPhone 4 and since the IOS 7 update (and the following update 7.0.2) I have noticed that my maximum volume level on my bluetooth earpiece is far too low. I have checked the audio levels and set to maximum on both the iPhone and the Samsung earpiece. I have turned on and off sound check, and tried both turning off and using different EQ settigs in the phones music settings. I have also used a hard and soft shut down of the phone after changing settings with no solution.
I work in a loud environment and listen to audiobooks while I work. I had no problem in the past hearing, until the next morning after I updated to IOS 7. I have used wired earplugs and the volume level is fine, just the bluetooth seems effected. Unfortunately the wired earphones do not allow me the freedom I need to perform my job.
Is there another setting or fix that I am missing, or is this just a condition produced by the update and hopefully will be rectified by anouther update in the future?
Thank you in advance for any help.

Are there any upcoming fixes/iupdates either to the software or usb cord that will fix this?
Are there any upcoming fixes/updates to the software of your Honda Accord that will fix this?  Everything works fine except when the car is put into the equation?

Similar Messages

  • Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly.  Is there a fix for this or are they even working on a fix.

    Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly.  Is there a fix for this or are they even working on a fix.

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • HT6010 Unable to turn on wifi on my iPhone 4 after the iOS 7.03 update.  Is there a fix for this?

    After installing the iOS 7.0.3 update on my iPhone 4S I am unable to turn on wifi.  Is there a fix for this?

    Not really.
    I upgraded to ios 8.0.2 and the problem goes on.
    I restored it to factory settings, and started installing every app, one by one, and the Copy + Paste problem still happens.
    I have an iPhone 4S 32GB

  • I have just updated to Lion and now my folders no longer show number of items on the bottom. Is there a fix for this?

    I have just updated to Lion and now my folders no longer show number of items on the bottom. Is there a fix for this? I allways found that handy. Now I have to click on an icon on the top, This is a backward step if that is now the only way to see the number of items. Am I missing something obvious?

    Parrotcat wrote:
    I have just updated to Lion and now my folders no longer show number of items on the bottom...    
    In the good old days of Snow Leopard, an open Finder folder had a border along the bottom of the window which could show the number of items in that window and the total available space on the hard disk or partition that folder resides on. That bottom border is gone in Lion and those two bits of information are gone with it. Is that what you're talking about? If so, I'd like to learn how to get it back too and "Show Item Info" is not the way.

  • Just recently update my Apple TV and iTunes, every time now I turn on my Apple TV, I have to go to my computer and close and reopen Itunes several times before my Photos share to the Apple TV.  Is there a fix for this??

    I just recently updated my Apple TV and iTunes, and now every time I turn on my Apple TV, I have to go to my computer and close and reopen Itunes several times before my Photos share to the Apple TV.  Is there a fix for this??

    This indicates the device is in recovery mode.
    Connect it to a computer running iTunes and restore it.

  • After upgrading my iphone 5 to IOS 7, the iTunes Store won't open. Is there a fix for this?

    After upgrading my iphone 5 to IOS 7, the iTunes Store won't open. Is there a fix for this?

    I had the same thing yesterday. After google gave me nothing and after I was sure my phone had enough charge to restart, I did a reset on my phone...
    Holding down the Power button, volume button and selector button on the front - for about 30 secs (or untill I knew the beeping had stopped).
    I cant remember if I then restarted it or it it restarted itself, but now its back to normal! No memory loss from the phone either.
    Freeked me out as its a new iphone 4s but glad to have it back! Without having to take it to get fixed by a pro.
    Hope that helps

  • HT1688 Since I've upgraded the IOS to 7.0.2 on my iPhone 5, my phone will randomly restart itself.  Is there a fix for this?

    Since I've upgraded the IOS to 7.0.2 on my iPhone 5, my phone will randomly restart itself.  Is there a fix for this?

    Howdy there Tuna241,
    Thank you for using Apple Support Communities.
    It sounds like your iPhone is restarting unexpectedly after the update to iOS 7.0.2.
    I recommend the steps outlined in the article named:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Regards,
    Sterling

  • After updating to OSX 10.7.3, my search (spotlight) no longer works. Is there a fix for this?

    After updating to OSX 10.7.3, my search (spotlight) no longer works. Is there a fix for this?

    Have you tried going to System Preferences > Spotlight > Privacy and dragging your hard drive into the box then drag it back. That will trigger a re-index.

  • Hi, Just bought an ipod classic 160gb and i notice that when I turn the volume down all the way, music is still heard, i.e. I cannot turn it down lower than a certain volume. Is there a fix for this? Thanks

    Hi, Just bought an ipod classic 160gb and i notice that when I turn the volume down all the way, music is still heard, i.e. I cannot turn it down lower than a certain volume. Is there a fix for this? Thanks

    I've got a feeling that's the way it is. I know that if I turn the volume down all the way, I can still hear the music very softly -- which is great for listening when I have a migraine!

  • Sometimes I get a message that reads " UNSUPPORTED Accessory is not supported" when I plug in my bluetooth transmitter to my gen 6 nano. Other times it works fine. Is there a fix for this?

    Sometimes I get a message that reads " UNSUPPORTED Accessory is not supported" when I plug in my bluetooth transmitter to my gen 6 nano. Other times it works fine. Is there a fix for this?

    Have you checker the connectors on both the transmitter and Nano for any signs of damaged, corroded pins?  It might help to take a can of compressed air to each.  The error message may be simply a result of the iPod Nano not getting a full connection with the transmitter at first.
    B-rock

  • When I make an outgoing call the recipient cannot hear as though the volume were turned down Lowe. However when I use my speaker phone function the recipient can hear at normal volume. Is there a fix for this issue? Thanks Teresa

    When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low
    However when I activate the speakerphone the recipient can hear me loud and clear
    Is there a fix for this?
    Thanks
    Teresa

    Hey Tlabounty,
    Thanks for the question. I understand you are experiencing issues with the microphone on your iPhone 5. To troubleshoot this issue, you may find the information in this article helpful:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Note that speakerphone and regular calls utilize seperate microphones on the device. It sounds like you have isolated the issue. Furthermore, if you determine that the issue is hardware related, the following resource may help you get started with the service process:
    iPhone Repair and Service - Apple Support
    http://www.apple.com/support/iphone/repair/
    Thanks,
    Matt M.

  • Mac app store tells me to log into edited by host account to update apps(that I don't own) but that is not my account and I never heard of this email. Is there a fix for this?

    mac app store tells me to log into <edited by host> account to update apps(that I don't own) but that is not my account and I never heard of this email. Is there a fix for this?

    Everyone here - please take a look at this thread ( the last two posts by WZZZ and Thomas Reed):
    https://discussions.apple.com/message/15205291#15205291
    It appears that a) Hotmail has 19 domains functioning as distributors for malware and b) someone is distributing pirated software. Although it does not appear to be related to the recent trojan, my suggestion: stay away from both.
    Edit: so why does everyone here appear to have pirated software (and doing it through it App Store)?????

  • Since updating my iPhone 4 to ios6 I can no longer access itunes through the itunes app.  I just get a blank white screen.  Is there a fix for this yet?

    Since upgrading my iPhone 4 to the new ios6 software I can no longer access itunes through the itunes app.  I there a fix for this yet?

    Scalesy05 wrote:
    I there a fix for this yet?
    Why would there be a fix?  YOU are having the problem.  I'm not, no one I know is having the problem.  No fix is needed.
    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.  Have you been through any, if not all of these troubleshooting steps yet?

  • I recently downloaded the updated itunes and not everything shows up. My operating systems is Windows 7 and graphics is AMD Radeon 6530D. Is there a fix for this?

    I recently downloaded Itunes and it does not display correctly. I have an AMD Radeon 6530D graphics card with Windows 7. Is there a fix for this?

    Hi McNinch9573,
    Welcome to the Support Communities!  Are you asking about the iTunes Movie Trailers?  Are you able to play any of the trailers on this site?
    iTunes Movie Trailers
    Installing QuickTime Player 7 - Apple Support
    http://support.apple.com/en-is/HT201288
    If you work with older media types or have a legacy media workflow, then you can install the QuickTime Player 7 application on Mac OS X Snow Leopard and later.
    Compatibility
    OS X includes QuickTime Player (version 10.x) which handles most media playback needs. Only Install QuickTime Player 7 if you work with older media types, have legacy workflows that are not supported by the newer QuickTime Player application, or need to use your QuickTime 7 Pro registration key.
    QuickTime Player 7 version 7.6.6 works with the following OS X releases:
    Snow Leopard
    Lion
    Mountain Lion
    Mavericks
    Installing QuickTime Player 7
    Choose your OS X version from the list below for information on how to install QuickTime Player 7.
    Lion, Mountain Lion or Mavericks
    Download QuickTime Player 7 from here.
    Double-click "QuickTimePlayer7.6.6_SnowLeopard".
    Note: This download is compatible with Mac OS X v10.6 or later.
    QuickTime Player 7 will be installed in your Utilities folder.
    I hope this information helps ....
    - Judy

  • Updated iTunes to latest version can'tairplay music but not a rented movie, is there a fix for this?, updated iTunes to latest version can airplay music but not a rented movie, is there a fix for this?

    updated iTunes to latest version can'tairplay music but not a rented movie, is there a fix for this?, updated iTunes to latest version can airplay music but not a rented movie, is there a fix for this?

    Do you really mean the latest, as in 11.0.1?  That was supposed to include a fix for Airplay.

Maybe you are looking for

  • Using macbook pro on a 32' Samsung tv

    Does anyone know how long the Apple DVI to VGA Display Adapter cable actually is? and will this allow me to dual display my laptop?

  • Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007

    Gentlemen, I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007, My current Support Package Level is: SAP_ABA       700     0015 SAP_BASIS     700     0015 PI_BASIS      2006_1_700     0006 ST-PI     2005_1_700     0006 C

  • RC-50004: Fatal: Error occurred in StageDBTier

    Can anybody help on this issue Please. We are using 11.5.10.2 applications with 10.2.0.4 database and trying to clone the Applications, got the error while doing adpreclone. $ perl adpreclone.pl dbTier Running Rapid Clone with command... perl /ul01/a

  • Get Application Server Name and Version

    Hello All, Is it possible to get the Application Server Name and Version using Java? To simplify my question, if I am running Weblogic, the jsp page should tell me that I am running Weblogic Version <number> or IBM WebSphere Version <number>. Thanks

  • Recieve data from another program

    hi, i'm trying to recieve some kind of data from another program i know where is the output of the program the problem is that i don't know how to get these datas. for example my program is writing the output in a temporary file but i'd like to recie