IOS 7 upgrade problem

I have a iPhone 5 after I upgrade to iOS 7 I'm having problem with my networking I keep loosing my AT&T logo and it keep searching and also I have lots of miss calls
I restore my Iphone grime iTunes also and it didn't help

the servers are slammed right now, additionally after download the authentication servers as well.
The entire planet Earth is trying to download the same thing at the same time.
Give it some time.

Similar Messages

AS5300 IOS UPGRADING PROBLEM

hi
I have problem . i m uploading IOS via Ronmon but error are as follow.
Frist status is :::
System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
AS5300 platform with 131072 Kbytes of main memory
loadprog: error - trouble reading file magic number
open: failed to find and/or load the bootloader: "bootflash:c5300-js-mz.123-15.b
in"
loadprog: error - on file open
boot: cannot load "cisco2-AS5300"
System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
AS5300 platform with 131072 Kbytes of main memory
device does not contain a valid magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
AS5300 platform with 131072 Kbytes of main memory
loadprog: error - trouble reading file magic number
boot: cannot load "bootflash:"
System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
AS5300 platform with 131072 Kbytes of main memory
and mem info is :::::::::
rommon 1 > meminfo
Main memory size: 128 MB. Packet memory size: 16 MB
Available main memory starts at 0xa000e000, size 0x7ff2000
Packet memory starts at 0xa8000000
NVRAM size: 0x20000
when I run commond Xmodem than errors comes
1) transfer canceled by remote system.
and 2nd ::::::::::::
modem c5300-is-mz.122-17.bin
Do not start the sending program yet...
File size Checksum File name
0 bytes (0x0) 0xffff c5300-js-mz.123-15.bin
WARNING: All existing data in bootflash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file c5300-is-mz.122-17.bin ...
BB0
ERR:Image size exceeds free flash space
rommon 3 >
plz check the thing and advice.
Thanks

The poster originally posted exactly this same question on the WAN Routing and Switching forum where it has gotten a couple of responses. I suggest that we consolidate the discussion on that forum.
HTH
Rick

Ipod touch IOS upgrading problem

My cousin just gave me her ipod touch and as soon as I plugged it in all the apps disapeared. Whenever I press check for update it just says, "you have the latest version 2.2.1" What do I do?

This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Above from:
http://support.apple.com/kb/TS3694Apple only aloos you to update to the latest iOS. You wll get errors if you try to manuall intall other than the latest iOS.

HT204368 I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade. Is there a way to restore the previous os version?

I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade (6.0.1). Is there a way to restore the previous os version?

I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade (6.0.1). Is there a way to restore the previous os version?

Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

After the iOS 7.0.2 update words with friends is not working for me either. When I attempt to open the app it just closes itself after a few seconds of being open. This happens every time I attempt to open it.

I cant upgrade my new ipad to the ios6 dont knkow why and whats the problem and i was alo trying to do the update simolteniously for infinity blade which i stoped in between as it crashed the ios upgrade once hence tryed it again it went half way but

i cant upgrade my new ipad to the ios6 dont knkow why and whats the problem and i was alo trying to
do the update simolteniously for infinity blade which i stoped in between as it crashed the ios upgrade
once hence tryed it again it went half way but it didnt work at all and i am trying to do it from the
India..

bnjr86 wrote: There have been times when I've walked in there, that I really don't want to deal with VZW anymore and just take my business elsewhere.
I wonder if another provider would really be much different? Read some of the other carrier forums - seems to be the same story everywhere.
I'm not disagreeing with you - I've found that I am usually more informed about Verizon policies and procedures than some of the reps in our local store.

After ios upgrade to 7.0.4 i got power botton and no sim problem need help help

after ios upgrade to 7.0.4 i got power botton and no sim problem anyone having this problem?

Installing an iOS update does not add a physical button.
As for the "No SIM" message, try removing and reinserting the SIM or replacing the SIM.

IPhone 4/32 software upgrade problem

Environment: MS Windows 7; iTunes ver 10.3.1.55; iPhone 4/32 iOS 4.3.
Problem description: everytime I run iOS upgrade to 4.3.3, after the download seems to be finished, iTunes pops up a msg box saying that my network did not respond in time and the update was unsuccessful. Internet connection is pretty fast (cable) and working properly, and all other iTunes functionality is OK. Downloaded file size: 666,2 MB. The event occurs every time I want to upgrade the system.
Question: What would be the solution? (apart from switching from Windows based laptop to Mac, which will probably happen in some future anyway)
Thanks in advance for help & looking forward to receiving an answer, for I would like to be able to upgrade my iPhone to iOS 5, once it has been released.
Witold

Well, thanks for trying, but unfortunately it did not help. Still the same result - one more info, though: error 3259.
edit: Will try again, and I guess you gave me the good direction.

Since an ios upgrade on my ipod, my device no longer appears in itunes or my computer

Since a recent ios upgrade, I can not locate my Ipod touch 5th generation in iTunes nor in My Computer. I am working with Windows 7. I have uninstalled and reinstalled itunes, quicktime and Apple Mobile Device Support software programs. I have also gone through the on line Apple Trouble shooting support for this problem with no success.
I did have WiFi syncing turned on before the upgrade and now when I go into settings on my iPod, the sync now option is greyed out.
Any other ideas please...

OK, never mind. After all that, a restart of the iPhone fixed it. That should have been the first thing I tried, of course, before posting. Sorry about that!

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
DRM audio is not effected as this is handled by the native iOS music app.
As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

IOS upgrade does it again. It trashes my old calendar entries

I have come to rely on the feature in the iOS upgrade that it will trash my old calendar entries. Upgrading to iOS 4 was no exception. It changed start and end times, repeat information, adds entries,combined multiple repeating entries into 1 even though they had different start and end dates and information in the entry and does a whole lot of other nifty stuff. I have reported this with every upgrade and now I realize that Apple does not care what happens to someone's calendar. This IPhone is being synch'd with a Mac so its an apples to apples (sorry for the pun) process.
I have a whole lot of issues with the calendar program on the IPhone. This is the one of the most annoying. The other is if you have parents in the 80's and you set birthdays. They do not show up on your IPhone. They show fine on the Mac but I guess the IPhone does not think your parent's birthday's are important enough to display. I am slowly getting to the point of regretting that I converted to the IPhone. For all of the bells and whistles, when a device cannot do the simplest tasks it becomes an annoyance. Oh yes this is a 3G and not a new phone. I do not intend to spend money until I see that Apple starts to take their customers seriously. They are slowly becoming Microsoft and that is the attitude that I thought I was getting away from.

You have options in the Organizer Tab for Calendar by clicking on Configure. From there, there you can choose to sync ALL calendar entries. This should be a resolution. Additionally, there are options to further control what syncs by clicking on the advanced button.
If you want to control how much calendar data remains on your mobile consider...
I have had problems with Blackberry's handling of appts in the past where - when an appt is deemed to be removed from the mobile device - it removed it also from Outlook! This should NEVER be - but WAS. As a result it is a better 'policy' to simply have your BB sync ALL appts and control how much will remain on your phone by using Outlook's archiving feature. When the calendar items do move to your archive, then you will see appts to be deleted from your phone but they will just be "older" appts according to what you have setup.
And regardless - before you do any new sync or major changes that may react unexpectedly...
Make a backup of your Outlook file just in case!!
Hope this helps.

3G icon in the status bar got disappear after ios upgrade 8.1

3G icon in the status bar got disappear after ios upgrade 8.1

Nginear48 wrote:
Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
And don't get me started on iBooks.
For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

IOS upgrade - can no longer resize pictures for messaging or email

Hi before the recent iOS upgrade, if I wanted to send a photo from my iPhone by either MMS or email I had the option to choose the file size of the photo before I sent the message. This option now seems to have disappeared. Does anyone know if this option has been removed, or is it now hidden away in the settings somewhere?

Hi AntonioC,
The forums wouldn't let me login as CFTrock so I had to register a new User ID (CFTagain).
Thanks for your response and for you'r suggestion.
I actually have contacted Verizon and here's what's been happening...
I thought it was the GB update but I can't be sure. I remember that the Facebook app notified me of an update which I downloaded around the same time of the GB update.
I can't be sure if it was the GB update or the facebook app update which has caused the photo upload error.
I did call Verizon tech support and after spending time doing some of their suggested actions (uploading the picture with 3G or WiFi, uninstalling, reinstalling
the facebook app, taking and trying to upload lower quality pictures, etc.). The Verizon tech put me on hold as he attempted to get in touch with Samsung.
When he got back to me he told me the only option/solution which Samsung and the Verizon engineers could come up with was a Factory Reset.
The Factory Reset has NOT helped. I had to lose all of my Angry Birds data (saved progress), I had to loose text messages because the SMS backup/restore
app I was recommended didn't do a good job, and my phone seems to be more sluggish since the Factory Reset. I suspect its the facebook app update
and NOT the GB update.
I have found a mediocre work around. If you want to upload a picture I would recommend you open up your phone's browser and type in facebook.com.
Hit the "Photo" tab, the next screen will provide you with a "Choose file" button. Click that and you'll be set.
Please DO NOT Factory Reset your phone. I really wish I had not. My phone
hasn't been right since that Factory Reset.
I really do believe its the fb app that is causing this particular problem.
Hopefully fb will release an updated app soon.
Anyone else have this problem or have suggestions?

WS-X6816-GBIC became PwrDown when IOS upgrade to 12.2(18)SXD7

When IOS upgraded from 12.1(13)E8 to 12.2(18)SXD7, one of WS-X6816-GBIC module (in slot5) become PwrDown in show module output but another one (in slot 4) is ok. The only difference I can find is DFC hardware version. Is there any limitation about this ?
IOS 12.2(18)SXD7
------------------ show module ------------------
Mod Ports Card Type Model Serial No.
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE SAL0752RJBZ
4 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAD05050HGC
5 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAL08186B80
6 0 Switching Fabric Module-136 (Active) WS-X6500-SFM2 SAL0708DF8W
8 0 2 port adapter FlexWAN WS-X6182-2PA SAD073900JL
Mod MAC addresses Hw Fw Sw Status
1 0009.1246.eba8 to 0009.1246.eba9 5.0 7.1(1) 12.2(18)SXD7 Ok
4 0030.f271.1972 to 0030.f271.1981 1.7 12.1(11r)E2 12.2(18)SXD7 Ok
5 000f.f780.2420 to 000f.f780.242f 1.7 Unknown Unknown PwrDown
6 0001.0002.0003 to 0001.0002.0003 1.4 6.1(3) 8.3(0.156)RO Ok
8 000d.650a.15c0 to 000d.650a.15ff 1.6 12.2(18)SXD7 12.2(18)SXD7 Ok
Mod Sub-Module Model Serial Hw Status
1 Policy Feature Card 2 WS-F6K-PFC2 SAL0752RKWF 3.4 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL0752RB28 2.6 Ok
4 Distributed Forwarding Card WS-F6K-DFC SAL08249SUD 2.5 Ok
5 Distributed Forwarding Card WS-F6K-DFC SAL081971W0 2.7 PwrDown
Mod Online Diag Status
1 Pass
4 Pass
5 Unknown
6 Pass
8 Pass
The early show module output;
IOS 12.1(13)E8
TANET_PTC_R6K#sh module
Mod Ports Card Type Model Serial No.
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE SAL0752RJBZ
4 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAD05050HGC
5 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAL08186B80
6 0 Switching Fabric Module-136 (Active) WS-X6500-SFM2 SAL0708DF8W
8 0 2 port adapter FlexWAN WS-X6182-2PA SAD073900JL
Mod MAC addresses Hw Fw Sw Status
1 0009.1246.eba8 to 0009.1246.eba9 5.0 6.1(3) 7.5(0.6)HUB1 Ok
4 0030.f271.1972 to 0030.f271.1981 1.7 12.1(11r)E2 12.1(13)E8, Ok
5 000f.f780.2420 to 000f.f780.242f 1.7 12.1(11r)E2 12.1(13)E8, Ok
6 0001.0002.0003 to 0001.0002.0003 1.4 6.1(3) 7.5(0.6)HUB1 Ok
8 000d.650a.15c0 to 000d.650a.15ff 1.6 12.1(13)E8 12.1(13)E8 Other
Mod Sub-Module Model Serial Hw Status
1 Policy Feature Card 2 WS-F6K-PFC2 SAL0752RKWF 3.4 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL0752RB28 2.6 Ok
4 Distributed Forwarding Card WS-F6K-DFC SAL08249SUD 2.5 Ok
5 Distributed Forwarding Card WS-F6K-DFC SAL081971W0 2.7 Ok

Watch the logs as it boots up , my guess there is a problem with the board . We had a brand new card for a 6500 with a problem and the box will power it off if it see's a problem. Ended up RMA'ing the card . Does it show anything when you do a "show diagnostic result all" command ?

After latest ios upgrade last weekend, i pad no longer recognised

Help Please
After installing the latest IOS upgrade last weekend, I am no longer able to get i tunes to recognise my Ipad 2.
The upgrade crashed my i pad (Plugged in, next to router) and i had to plug in to i tunes to restore.
I have removed and reinstalled all apple elements through control panel but the problem still exists.
Any ideas gratefully received.

Device not detected in iTunes

Ios upgrade & applications data

Hi;
if i upgrade ipad2 to latest ios, is my app data like tango,viber can be moved to the new ios without problems?

Thanks,But i'd like to update using ipsw file, is app data not effected in the case too?

IOS 7 upgrade problem

Similar Messages

Maybe you are looking for