IOS 7 vibration

Upgraded to IOS 7.  Ran well.  Had to switch to a new iphone 5 as my employer switched service providers.  At this time had to update to IOS7.03.  Shortly after, the vibration went missing.  I was able to solve it by upgrading to 7.04, but now it is gone again.  Is Apple aware of this issue and are they working on a solution ?

That sounds like a hardware issue, not software. You can try all of the user troubleshooting, restart, reset, restore from backup, or restore as new, however if the vibration stopped, working, I would believe hardware. Make an appointment with the Genius Bar and have the hardware checked. I've not seen posts regarding vibration stopping with the iOS update, so I doubt Apple is working on a solution.

Similar Messages

  • Ios ane vibration

    Hi I am using Flash Pro CS5.5 with air SDK 3.2 and I am trying to use air native extension vibration to vibrate my ios app. (source from adobe)
    I don't use Flash builder or xCode. I did everything to work vibration on my iphone but it seems app crashes when vibration.call() functions calls. I don't really know why.
    There is no problem with compling process but I just think the reason is because I am making it from Flash pro not Flash builder.
    Does anyone successfully work ANE vibartion on ios? I'd love to share with me.
    Thanks,

    Hi DianeYu, neh@adobe,
    I have same issue while working a mobile app in Flash CS6 with Air for iOS 3.2 (also tried compiling with Air for iOS3.3, iOS3.4). But my issue still remains unsolved. If you got the solution for this problem please tell me!
    And one more thing while compiling with Air for iOS 3.4 i am getting another error which is given below:
    The content cannot be loaded because there was a problem loading an extension: Error: Requested extension com.adobe.Vibration is not supported for Windows-x86.
    Thanks for your suggestion in advance.

  • After iOS 5 vibrates from texts are always double buzz. Why?

    I have an iPhone 4 and before when it was iOS 4 texts would always just go brrrr.
    Now no matter what tones or custom vibrations I have setup the vibrate is brr brr.
    ('silent' switch is always on)
    Kind of annoying because I'm used to the refinement of apple.
    Any help is greatly appreciated.

    Dunno. Check the manual. It should be bookmarked for you in Safari.
    Best of luck.

  • IOS 8 Vibrate on silent problem

    i've have this issue with iPhone 6+ quite often, when set to silent mode and with vibrate on silent on, incoming call would only vibrate once than stopped even though the incoming call is still active.  A reboot will fix it but it's very annoying and I've missed tons of calls because of this.  Anyone having same issue or how do I report to Apple?

    I'm assuming you've updated to iOS 8.1, but if not, do that.
    Try making a custom vibration pattern.

  • |ios|adobe vibration + game center ane conflict

    Hello, I am having trouble then I try to use adobe's vibration and Game center ane's in a project.
    debug mode log:
    [SWF] com.adobe.Vibration - 857 bytes after decompression
    [SWF] com.adobe.ane.gameCenter - 2079 bytes after decompression
    [SWF] Vibration and Gamecenter.swf - 142 bytes after decompression
    Vibration isSupported()
    Vibration Constructor: Create an extension context
    ArgumentError: Error #3500: The extension context does not have a method with the name initNativeCode.
      at com.adobe.nativeExtensions::Vibration$/initExtension()[/Users/meetshah/Documents/Adobe Flash Builder 4.5/VibrationActionScriptLibrary/src/com/adobe/nativeExtensions/Vibration.as:58]
      at com.adobe.nativeExtensions::Vibration$/get isSupported()[/Users/meetshah/Documents/Adobe Flash Builder 4.5/VibrationActionScriptLibrary/src/com/adobe/nativeExtensions/Vibration.as:43]
      at GameCenterTest()[C:\vibration and gamecenter\GameCenterTest.as:119]
      at GameCenterTest()
    Cannot display source code at this location.
    Vibration isSupported()
    air sdk: 17.0.0.138
    Project:
    Dropbox - vibration and gamecenter.zip

    Hi Nitacawo,
    I tried reproducing the issue. And I couldn't find the reference to the path "/Users/meetshah/Documents/Adobe Flash Builder 4.5/VibrationActionScriptLibrary/src/com/adobe/nativeExtensions/Vibration.as" Is it from the swc file that is used in the project ? Can you rather provide the code so that we could find out what is going wrong here ?
    -Tushar

  • Iphone4 vibration not working after upgrading to ios 7

    I upgraded my i phone 4 to ios 7 and drom then vibration is not working....!!!
    I dont know how could apple lag this feature in a iphone4 ios7
    I find my iphone really annoying without the vibration feature

    I should also mention, I've tried multiple browsers (Chrome, Safari, Opera), all with the same result.

  • Notification sounds/vibrate not working iOS 5

    Updated to ios 5....I have several notifications other then just email and SMS...CNN, breaking news...the like. The apps themselves have sound preferences...and I have their sounds set in notification as well. Yet the pop up shies up at top...no sound...no vibrate. Any suggestions (other then a restart...did that)

    Had exatctly the same troube with my new from box 4s. speaking exactly, no sound notification with Foursquare. Any suggestions?

  • After updating to iOS 7 for my iPhone 5, my phone is now in constant vibrate mode.

    After updating to iOS 7 for my iPhone 5 last week, my sounds went away. Phone is randomly showing the ringer silent graphic without me touching the phone or putting it into this mode. The volume settings under sounds are on, notifications are all correct also, the vibrate switch on the side is NOT in the vibrate position. After pouring over threads for the past week, one suggestion fixed it for a day, but it's now reverted back to vibrate only mode!  I went to settings----general-----accessibility----under hearing switched mono audio off, like I said, fixed the problem for a day, but now that no longer works! It really seems to be a bug with the software update, which the the 7.0.3 did not fix. Help, would like my phone to work normally again. Suggestions?

    Hi chuckrabaw,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like the iPhone is searchiong for a network. It looks like you have already done some troubleshooting. There are a few steps listed in this article you did not mention trying, they may be able to help the issue.
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Cheers,
    Mario

  • My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

    My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

    I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
    Along with the original poster, I'd appreciate any help.
    As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

  • IPhone 4 will no longer vibrate since iOS 4.3 update.

    My iPhone 4 stopped vibrating after installing iOS 4.3
    Also what's the deal with the shortened text tones?!

    MLeardo wrote:
    I'm having the same problem you are with iOS 4.3...
    When i leave the phone on vibrate and I get a text message the phone vibrates twice now instead of once like it used to. What's the deal with that...
    they changed it in ios 4.3 to this.

  • My Iphone 5 no longer vibrates since I upgraded to IOS 7. All the settings look to be set correctly

    I updated to IOS 7 this weekend and now my phone does not vibrate. I checked everything in settings and it all looks to be correct. It is annoying. Now I can't know when I get a message or call phone my wife because I can't feel the phone vibrate at work. Annoying upgrade if this does not get fixed soon.

    I got the same problem with my iphone 5 rear camera and tried the solutions suggested here but it did not work.
    The camera application which came with ios7 is frozen as soon as it opens. I does not take photos or switch between cameras.
    I have been able to use the front camera with Snapseed, QR reader . however no application is able to open my rear camera.
    I am not sure but  it can related with the application updates either ios7 or the camera applications already installed on our iphone. Uninstalling those apps which has access to camera and rebooting may solve the problem. This is just an idea !

  • After updating to iOS 8.0.2 my iPhone won't vibrate

    Hi,
    After I updated to iOS 8.0.2, vibration completely stopped working on my iPhone 6 16GB.  
    It does not work for messages, notifications, calls, when I plug in the charger, with or without silent mode, etc. 
    Some solutions I've tried:
    I've checked settings, they are correct (do not disturb is off!).
    I tried to make a custom vibration pattern, didn't manage to get the phone to vibrate...
    I restored the phone in iTunes. I checked if vibration worked while setting up the phone, before the backup of my settings and apps began transferring; still didn't work. 
    Any ideas?

    So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

  • [iOS 8] How to turn off vibrate notifications on new calendar invitations?

    I don't want any notification when I receive a new calendar invitation via Exchange.  I had no problems disabling this in iOS 7 and earlier, but with iOS 8 I can't seem to turn off the vibrate notification.  In Settings...Notifications...Calendar...Invitations, I've turned off everything there.  Notification Sound is set to None, and Vibration is also set to None. 
    Yet whenever I receive a new calendar invitation, my phone does a short vibrate.  No alert shows up on the screen, just a short vibrate.
    How do I silence this thing?
    Using iOS 8, iPhone 5S 64GB.

    Here is what finally worked for me in ios8 (8.1.2)
    Settings > Notifications > Calendar > Invitations > Notification Sound > Set *both the alert tone and vibration* to None (they are separate settings.)  The view from the Invitations form is a little misleading - the Notification sound will say "None" even if there is a vibration setting other than None.
    Not sure when this changed but it was making me a LITTLE CRAZY.

  • After updating my ios 6 to ios 7 also when i open apps like whatsapp r wechat or adobe reader its screen is still vibrating being blurred and fluctuate... i cdnt undrstand why its so and hw to resolv ths.?????

    after updating my ios 6 to ios 7 also when i open apps like whatsapp r wechat or adobe reader its screen is still vibrating being blurred and fluctuate... i cdnt undrstand why its so and hw to resolv ths.????? pls help me

    shillshocked wrote:Since version 1.12, LightDM now relies on systemd-logind for seat
    management. It means LightDM van load seats automatically as they are added
    from logind.
    Ha! I searched something like that during my investigations, I was wondering if it wasn't about the recent logind changes, but I gave up due to the lack of documentation

  • How to turn off vibrate for alarm on iphone 5 ios 6?

    with the release of the iphone 5, apple changed the dock connection...so i can no longer use it with my ihome alarm clock without an adapter.
    since apple has not yet made available the adapter, i've been using alarm in the clock app to wake-up.
    i love that i can set the alarm to a song...but i do not like that it vibrates when the alarm goes.
    how do i turn off the vibration for the alarm on my iphone 5 running ios 6?
    thanks.

    Thanks. Seems like this cropped up after the iOS 6 upgrade. Too bad Apple doesn't quality control their software before release. Something like alarm sounds is a pretty big oversight, kind of like maps. Your solution is right on the money even if it is a very roundabout way of getting to the desired result. A simple software fix would be to offer  a sounds/vibrate option for ringtones, reminders, and alarms at the "settings" level. Other than oversight, I cant think of an ulterior motive for having it buried in ringtones.  Thanks again for the fix!

Maybe you are looking for

  • Open Directory: "Unable to load replica list"

    I'm currently running Mavericks Server 3.1 on my Mac Mini at the home network. I had some issues with the client logins and went for local accounts on the clients instead. Today I finally wanted to fix the problem and go all Open Directory. But the O

  • Mail keeps crashing 10.10.1

    Since I have upgraded to 10.10.1 i have been having problems with Mail Often when I try and open any other folders when coming from inbox the app crashes and I have experienced this over the last coupe of weeks. Now I cannot open mail and when I righ

  • Front row using iphoto as core to display photos?

    Hi all, i have a question about leopard front row as i still have not got it yet in asia i wonder if someone could enlighten me about using front row and iphotos. main thing is that i do not have iLife install in my Macbook at all, but after upgradin

  • Can song Genre be changed?

    When I'm browsing "genres" I have noticed that not all songs from the same genre are being grouped together.  When I look under Christmas, at first it said there was one song. Now it says there are 4 Artist, 5 Albums. I know I have at least 25 Christ

  • Just another 'ATI KMS' thread - crash by console or X shutdown

    Hi! I'm one of those who is trying to get my Radeon HD 3200 working with early KMS and Arch x64 on my HP touchsmart tx2. While the last versions worked either not at all or a little bit so X could start the current one seems to be a bit more stable.