Ios 7 wifi connected but not working

my iphone 5s running ios 7 is connected to my home wifi but its not working, but my pc is doing fine on that wifi. and when i try connecting my iphone to other wifi it seems to work without any problem. i've reseted network settings many times and reseted all settings once but it wouldnt work for me. so whats the problem and how can i fix this?

Try power cycling your router. Remove the router from power for about 30 seconds and then start it back up again. After it is finished configuring, try connecting your device again.

Similar Messages

On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Email account. What is causing this and what do we need to do to resolve it?

On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.

Contact whomever supports the email account and get the correct Outgoing email server settings from them.

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming. Can make calls with WiFi connection but not on the road. Any idea whats going on?

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming.
I can make calls with WiFi connection but not on the road. Any idea whats going on?

Oh no! I'm sorry to hear you had problems in the are you're in AkJohnDye. I checked your coverage and I do see we have an extended 4G coverage. This means you're able to use your phone but it needs to be activated in a 4G LTE Verizon Wireless coverage zone. I apologize.
AdaS_VZW
Follow us on Twitter at @VZWSupport

My iphone 5c is not working on wifi or on 4g. It says it is connected but not working?

I phone 5c internet not working on wifi and on 4g.

Hi.For wifi issue, You can try to Reset Network Settings. For 4G issue, please check your balance or if the carrier did not support 4G network.

My wifi connection is not working can you advise.

My i pad was connecting but wont now . any advise please.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Playbook WIFI connected but not able to access network

Hi,
Have a 32GB Playbook and from new has had wifi issues. Running 2.1.0.1314.
Symptoms are that works fine on a variety of open and secure networks until a point where wifi is showing as connected, it tells me I have an internet connection but no apps or browsers able to access the internet, just unable to resolve host name.
Having trawled the internet I have tried the following fixes -
All methods of rebooting and changing date/time etc.
Deleting the saved network - in fact all networks
Changing various settings etc.
The only fix that works is a complete security wipe at which point it works again until the next time, which has now occurred 5 times.
The onset of each episode of being frozen off of networks seems to be login on open connections. I have it set to ask for connection to a saved network and when accepted the login page opens. However on occasion the login "handshake" seems to get confused and I am left with the device supposedly loggedin but no network access.
No matter what I then do the same issue exists on all networks I try until I do a full wipe.
All settings are standard, websites allowed to access location etc.
Can't register the device for support, get the message that support not available.
Any help appreciated.

UPDATE
After deleting all saved networks and rebooting the PB it failed to connect again to the secure network I had last tried.
However, it did connect to an open wifi hotspot. I am wondering whether I need to ensure that the next network I try after experiencing the issue and doing the above is different to the one I was trying to connect to last.
Is there some kind of residual network memory hang up !
Will update again next time it occurs, which historically has been every 2 - 7 days.

Ipad 2 IOS 7 Camera Connection Kit Not Working

I have Ipad 2 and Apple Camera Connection Kit. Since update to IOS 7 it has not worked. I have tried everything suggested on the boards but it still does not work.

I'm surprised this worked at all. I gather the camera connection kit was intended as input only.
1) You could try the app...
"Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11
works on my iPhone 4 running ios 7.1.2
There are other of these apps around that work on devices not supported by AirDrop.
2) You can downgrade to ios 8.2.
For a limited time Apple will allow you to downgrade to the previous release. Hurry do not wait.
See brownox second post here:
https://discussions.apple.com/thread/6545455
and
http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/
see what versions are allowed:
http://api.ineal.me/tss/status
see the post by arizonacat and others in this thread.
https://discussions.apple.com/thread/5337442?tstart=0
arizonacat points out these sites:
Provides easy access to Apple firmware files.
http://www.ipswdownloader.com/
How to install the ios software. The install will erase your exiting data. Backup your existing data.
http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/

Wifi connected but not able to access the internet

I was able to connect to the wifi, but can not access the internet. It shows the blue bars, but for example, I can't log into facebook. My laptop, my blackberry are all connected but I can't get the ipod to work. I have removed and reinstalled the network connections, and even adjusted the ip address, to no avail.

I am not having problems at home, works fine with my home network. In Starbucks or the Airport I can't exactly go change their router settings. I think Apple has a problem here that they need to fix. There is no reason why the Ipod Itouch WiFi settings have to be so difficult, cranky. It shoul dbe able to work more easily.

Iphone 4 (4.2.1. - 4.3) Wifi connected, but not connected to the internet.

I bought my iPhone 2 weeks ago, never bothered trying to use my wifi. Now that I need it, it won't work.
I was on 4.2.1. 03.10.01, Wifi did not work so I upgraded it to 4.3 thinking it's a "version problem". Now Im on 4.3, nothing is repaired.
When I connect to my wifi connection, it says that I am connected, but whenever I try accessing the internet via Safari, The App store, youtube, weather, maps... it's says that no network was found.
My computer and my siblings ipod/computers/iphones wifi work properly.
Could I please get a solution, and if I go to the apple store will this be solved? I still have a warranty till May I believe.
Thank you

Believe it or not but your problem starts at the router level. When you think you are connected to your WiFi, tap Settings > WiFi > and the blue ">" next to your network name. Your device IP most likely starts with 169.x. This is an internal device IP generated by your iPhone that occurs when your router doesn't complete the DHCP assignment of IP addresses properly.
Try the following (anyone of which may fix the problem):
1. Reboot your router (unplug the power cord for 30 seconds)
2. Reset the network settings on your phone - tap Settings > General > Reset > Reset Network Settings
3. When the phone restarts, tap Settings > WiFi > Other and re-enter your network name, security, and network password.
If you continue to have problems, then it's time to stop using WEP encryption (if you are still using it) and check to see if router firmware updates for your router. If you have to use WEP, set it to 128 bit and use the WEP hex key in place of a password.

WiFi connected but not in use

In settings -> WiFi, iPhone claims it is connected to my home WiFi network. However, "3G" still appears in the top left. Sometimes the WiFi symbol will come on for a few seconds at first, but it always reverts back to 3G.
I have an iPhone 3G which connected to the WiFi with no problems both before and after 3.0 update. It still connects to WiFi and uses all net apps with no problems, even without phone service. I turned it off to make sure it wasn't interfering in any way, but the new 3GS still won't stay on WiFi.
Throughout all of this, it ALWAYS says in WiFi settings that it is connected. It seems like it just isn't using the connection for some reason.
I have tried power-cycling the router and iPhone. I have tried selecting Forget Network and rejoining it.
I saw one similar topic here that required all sorts of router adjustments, but I can't go messing with my router. Please help me find a solution that involves only the iPhone itself!

Setting the router preamble to long does not work for me. I have tried everything.
I am connected to WiFi, according to the icon in the corner, but it just stops working at random times for all applications. The only way I can get the WiFi working again (temp fix) is to flick airplane mode on and off. Then it will work for a while, and then mysteriously stop working again, even though it says I am connected etc.
I have n 1st gen ipod touch, and two 3G phones here that can connect and stay connected with absolutely no problems, so it is definitely something with the 3GS.
I think I am going to have to try returning this iphone to Apple and getting a replacement, as I have tried everything to get it to work properly.
Not to mention the compass is VERY badly off with this iphone. But that is not as big a deal as WiFi refusing to work.
It is too bad because I get great battery life with this iphone... better than my 3G... and I am worried about returning this one and getting a replacement with poor battery life that I read so many other people seem to have.

Photosmart C310: WiFi connected, but not showing up in network via Mac or iPhone

I am using a HP Photosmart Premium C310. It is connected to WiFi, but does not show up on Mac or iPhone via Wifi:
- iPhone Airprint does not find the printer (select printer)
- Mac "add printer" does not find the printer
- newest HP Setup Application (HP_Lion_Ink_SW_v12.13.14, Dec 2011) finds printer only as long as connected via USB, reconfigures WiFi settings, but can not re-find the printer when USB cable is taken off
- I can send "ping" to the printer using the IP address shown in touchscreen info panel so it is online in WiFi
- I tried to reset factory settings for settings + network settings, no change...
Is that a defect or any idea how to fix the problem?
Best regards, any help appreciated...

Hi,
Per your description, i believe the issue may being caused by your router compatibility with Apple Bonjour, which require multicasting support in order to operate propertly.
In order to verify, try to temporary create an ad hoc connection between your iPhone and the printer and check for any change:
Step One : Restore the network defaults on the HP All-in-One
On the product control panel, touch the Setup icon ( ). The Setup menu displays.
Touch Wireless .
Touch and then slide your finger down on the display to select Restore Network Defaults .
When asked 'Are you sure? ' touch Yes .
After the network defaults restore, touch Wireless Connection , and then touch On .
The message 'Wireless Radio is now on ' should briefly display on the control panel and the Wireless light ( ) on the HP product should start to blink. The HP product is now openly broadcasting the ad hoc wireless network.
Step Two: Create an ad hoc wireless network connection between the HP All-in-One and the Apple device
On your Apple device, tap the Settings icon ( ).
Tap Wi-Fi .
Under Choose a network , find the name that starts with HPC310 , and then tap it. A checkmark should display to the left of the name.
Wait three minutes to make sure that the ad hoc connection is established and try printing from the iPhone by taping the Action icon ( ) and then tapping Print.
If you were able to print through the direct printer, it means the router more likely cause the problems..
Please clarify your router brand, model and the router firmware version if available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

[SOLVED] WIFI connection is not working

Yet Another WIFI issue
When I try 'wpa_supplicant -i wlan0 -c <(wpa_passphrase "mylongssid" "mylongkey")'
I receive this error:
Successfully initialized wpa_supplicant
wlan0: Failed to initialize driver interface
I was on my wifi at home this morning surfing the web and then I went to school (So I hopped to a different WIFI in other words)
It seems no matter what I do with netctl, iw, wifi-menu, and ip link that nothing works. Currently I do know how to set wlan0 up/down, restart my netctl profiles, display iw stuff, scan with iw, etc.
But I do not seem to know enough. Can anybody help by providing some debug commands?
Last edited by bobeflick (2014-11-07 14:40:02)

Some Broadcom chip that has b43 firmware.
I will post the output of the lspci in a few moments. I have to transfer some output via a flash drive.
Here is the output of some stuff:
http://pastebin.com/8vNyHZWs
My drivers worked fine this morning at my house, and they usually work at school after a reboot. So I am not sure why you need driver info. My question was what debug commands can help me diagnose my wpa_supplicant error? As in what log files can I check? If I could find a log with a more descriptive error, I might be able to fix my WIFI. Or possibly some logs for netctl? I really do not know, since networking is usually magic in all the easier linuxes I have used in the past.
Thanks for the really quick responses by the way I have never had such a fast help response for any other distro.
Edit: I should note that both my home and school networks have the same type of WPA security.
Update: When I booted my labtop at home, I ran wifi-menu and voila my home network was working. I will try the WIFI at school again tomorrow and post another update after that.
Update 2: Running wifi-menu at school worked today. I have no clue why it did not work yesterday. (I really should setup netctl-auto)
Last edited by bobeflick (2014-11-07 14:39:03)

Wifi Connected but not allowing connection to internet....

Ok for starters I am by no means computer illiterate. I have several industry certifications and have worked in IT in one form or another for over 10 years. That being said I have tried all the obvious solutions to fix this issue. So please save your effort in telling me to flush dns servers, check connection settings on clients, run ipconfig with various switches, etc... all this has been done and failed. That is not to say I know everything, because I don’t, I’m just saying that I have tried all the obvious troubleshooting routes.
Now… on to my issue. I have a WRT54GS ver. 5 and it has worked flawlessly for several years now. My machine is hard wired to the access point and I have no troubles connecting to the internet via said PC. The wireless I use for my wife’s laptop and my iPhone. I use mac filtering and WPA Personal with TKIP, dhcp is disabled and IP's are assigned manually via TCP/IP settings in windows. Two days ago my wife complained that she was unable to connect to the internet despite the fact that she had a solid connection to the AP. After checking her machine and finding everything in order in terms of the connection settings I also discovered that my iPhone was also unable to connect to the internet via Wi-Fi, again despite a strong connection to the AP. This led me to believe that the issue lied with the AP since nothing had changed on the client machines and all the connection settings were correct. I am able to ping the AP from the client but it is not routing traffic to the internet.
That brings me to troubleshooting the AP. I logged in and verified that all settings were as they had always been in the router, not one thing had changed. So to make absolutely sure it was not some setting in the AP that had been changed somehow I reset the router to defaults and re-configured it EXACTLY as it had always been. Still no love. I also tried the following to further troubleshoot the issue with no luck:
Clearing WINS and TCP/IP stack in windows on the laptop.
Disabling WPA and connecting with no security save MAC filtering
(yes I made sure that MAC filtering was set to permit and that all MAC addresses were correct)
Upgraded to the latest firmware.
Unplugged wireless phones throughout the house and cycled through all 11 channels to rule out interference.
I guess what I am now trying to figure out is whether or not the routers Wi-Fi is bricked. Is it possible for the Wi-Fi to be bricked but still be able to connect to the Wi-Fi network with a strong signal and for wired to work just fine? I would think that if the Wi-Fi was kaput that one would not be able even connect to the AP via wireless. I am to the point now where I’m about to say screw it and just go buy a Wireless N router and be done with it. But to be honest I am a little leery of Linksys now if a two or three year old router is bricked without warning or any apparent cause. Even though I have used Linksys products for the entirety of my IT career, I am now having second thoughts about going with cisco products if indeed it is bricked and I have to go out and buy another AP. Any help the community here can offer would be much appreciated, I don’t mind getting a new AP as the N speeds would be a plus but I want to make sure that all hope is lost for the WRT54GS before I do.

Thanks for your reply.
Yes, as stated in the OP all clients wired or otherwise have IP's and DNS info manually entered in windows TCP/IP configuration. All of the IP info has been the same for years and it works fine on my machine (hard wired) with the only difference being the last octet of the IP, subnets and DNS settings are the same on all clients.
All 4 clients (My PC, Laptop, Iphone, and wireless printer) can all ping both ways without issue. As I mentioned before the wireless clients connect to the AP just fine and all settings are verified correct. My WLAN is still working flawlessly and I can connect to and view all clients and shares. The issue seems to lie with the WiFI routing to the internet: I can connect to the internet from the wired PC and all the clients on the local network have connectivity, the only issue I have is that the wireless clients (in spite of a working connection to the AP) cannot seem to get thorugh the internet. However I did change the RTS and Fragmentation to 2304 and the beacon to 50 as you advised and set the DNS servers to what you listed on the wireless machine and was still able to ping back and forth but had no connectivity to the internet.

USB 3.0 Bracket (Optional) Connected but not working :(

I have connected the USB3 Bracket for the additional 2 USB3 ports, but it does not seem to be working.
I have Renesas Electronics USB 3.0 Host Controller listed twice and Renesas Electronics USB 3.0 Root Hub listed Twice in my Device Manager.
The Two USB3 port directly on the Mobo work fine . When I connect to the bracket ports the power lights on the drive come on but that's it, system does not see it.
I have check to see it the connector (JUSB2) was seeded properly and secure. Any Ideas? Thanks in advance
My System:
Mother board is P67A-GD65 (3)
i7-2600K
CORSAIR H70
16 Gigs CORSAIR Vengeance 8GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
2 WD Black 1tb Harddrives
ASUS DRW-24B1ST
2 MSI N560 GTX TI Twin Frozer II in SLI
CORSAIR 850 PSU
USB Setting in BIOS:
   USB Controller - Enabled
   Legacy USB Support - Enabled
   Onboard USB 3.0 Controller - Enabled
   USB 3.0 Legacy Mode Support - Enabled

Excerpt from Warner's signature;
FAE, MSI USA
Welcome to Unofficial User forum! For official support, please contact us directly.
MSI Tech Support - Phone (USA):
+1.626.271.1004 x1 (MB/VGA)
+1.888.447.6564 (Notebook/AIO)
MSI Tech Support - Online (USA):
http://www.msicomputer.com/msi_user/ts_form.aspx
901 Canada Court, City of Industry, CA 91748

My wifi connection is not working on my new iphone

Hi,
I go into my setting and I see my home wifi network and select it and I also see a check mark on my wifi network once I select it. But I dont see the unit switching from AT&T E to my wifi network. I am not sure what needs to be done to switch to my wifi network.
Am I missing a setup or something. Please share what you find in this regard....

http://discussions.apple.com/message.jspa?messageID=4819877#4819877
Hopefully this will fix it for you.

Ios 7 wifi connected but not working

Similar Messages

Maybe you are looking for