IOS 8.0.2 camera not available from lock screen

iPhone 6, upgraded to iOS 8.0.2 last night. Now at the lock screen, the camera icon is there but you cannot scroll up to activate it.

It works for me with iOS 8.0.2.
As this shows (from the iPhone User Manual), you could also use Control Center.

Similar Messages

  • Opening camera or calculator from lock screen

    Recently I upgraded my 5S to IOS 8.3 and now faced issue when starting camera or calculator from lock screen.
    I'm pressing "home" button to activate screen and then start calculator or camera from bottom menu, but the screen goes black immediately.
    When I press "home" button again, I can see that the camera or calculator will be closed and I'm back in lock screen.
    Does anyone else have similar issue with 8.3 ?

    I currently have the exact same issue with my iPhone 5s.
    The previous update was golden and fixed every issue I had with my 5s. I have my 5s set up for Touch ID/password and I was thinking it might have something to do with that, but I haven't gotten around to testing this issue without all of that enabled.
    I hate to say it, but I'm glad I'm not the only one who has this issue...
    This update also bright back other issues that were fixed in the previous update, for me anyway.
    Is there a way for us to officially submit this issue to Apple?

  • IOS 12.4(15)XW not available from Cisco Web site

    Can anyone please tell me why this version is not available from Cisco Web site as I am trying to download it to test on a cisco 2851 series router .The documnet below in page 7 & 10 describe  the requirement for this version. What is the replacement version for this if that is not available?

    Well, maybe I am missing something but I do not see a 12.4(15)XW release on CCO for the 2851 platform. I see references to it in documentation but I don't see actual release notes or a download link. So, where exactly did you see this particular version for this platform?
    Based on the PDF provided by the OP I think he is trying to add a fax module. In the PDF it is stated a few times that you can use 12.4(15)XW or 12.4(20)T. What this basically means is that these are minimum IOS version levels that you need to use that module. You would not want to run the minimum in most cases because software defects are abundant and seem to be endless. IOS release trains are somewhat over complicated in my opinion but here is my quick take. The XW is a early deployment release. These releases are "one offs". Usually added to incorporate a new piece of hardware. Sometime after these releases come out (again, to get the product to market) the code is incorporated in a T-train (in this case, 12.4(20)T). The idea is that the T-train code is used to introduce features/hardware/etc. that will be rolled into the next main-line release (in our world that is 15.0).
    Back to your issue. I can't find 12.4(15)XW but apparently p.bevilacqua has been able to find it. Maybe he would be willing to provide the link. If that doesn't pan out, I suggest that you look at releases after 12.4(20)T (including the latest service release for 12.4(20)T). They go up to 12.4(24)T. T-trains are touchy so you have to do your research and testing. I have had decent success with 12.4(20)T until recently (MGCP and T.38 fax, no joy). I have also used 12.4(24)T with OK success thus far. I know that p. bevilacqua doesn't like the 12.4T train "because its buggy". My opinion is all of this software is buggy. You have to identify the minimum release that will work with your hardware. Go to the latest minor/service release and research the bug toolkit. Oh, and always test.
    OK. Down the rabbit hole I go.
    HTH.
    Regards,
    Bill
    Please remember to rate helpful posts.

  • IPhone camera icon missing from lock screen with iOS 8.1

    Hi,
    I have an iPhone 5S with iOS 8.1 and the iphone camera icon is missing from lock screen.
    How can i enable it?
    Thanks!.

    Restrictions is OFF.
    I don't know what to do

  • Camera button not working from locked screen.

    Recently I tried to take a photo from my locked screen. Usually I just double click my home button and the camera pops right up and I can take a picture. This time though, the camera icon does pop up, but when I go to click it the camera icon just "jumps" and will not open the camera option. It's very annoying for when I just want to take a picture, now I have to go through the motion of unlocking my phone and going to the camera. OH, also on the locked screen, the camera icon has two lines, both over and under it.
    How can I fix this, is it in the settings somewhere?

    Touch the camera icon and scroll all the way up. You do not have to double click the home button.

  • Siri on iOS 6 lets me post to FB from lock screen

    From the lock screen (password protected phone), I am able to post to FB by asking Siri to open "Facebook" and either speak or type my message (The phone is locked, all the while).
    So, could someone not abuse my FB by posting even when my phone is locked ?
    - Ram

    vbmike73 wrote:
    Is anyone aware of this?? From the lockscreen, with iOS 8, even if you have a passcode, someone can pick up your phone and say to Siri "Listen to voicemail" and it will play voicemails on the speaker! This seems like a HUGE oversight.
    Why are you leaving your phone where untrustworthy people can pick it up? My debit card requires a pin but I still wouldn't leave it where it could be picked up as there are still things that can be done with it.
    Of course this can be turned off by denying access to Siri from the lockscreen all together, but that eliminates a lot of other things too that are convenient.
    There is always a trade off between security and convenience. Apple gives you the option to have the security you're asking for. Until such time as they change the system, you'll need to decide which is more important to you, security or convenience.

  • Control center and camera not working on lock screen

    On the lock screen my control center or camera sometimes doesn't pull up! Also the touchscreen doesn't work sometimes while just using the phone like when typing or in a game. I've tried resetting it and restarting it! Is this a software bug? Will there be an update To fix this?

    Hi Trevor318,
    Thanks for the question. If I understand correctly, the touchscreen does not respond sometimes and control center doesn't come up. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • "Estimated time left to full charge" not available on lock screen after 5.1 update

    Hi,I am glad Sony is pushing the new updates faster than the others. However, there seems to be a lack of testing. Till today I wish I could go back to Kitkat officially, especially for the reason that equalizer/music controls worked on all apps including youtube. But after lollipop, the volume is too low for youtube and other music streaming apps. Anyways, with a recent update, now I am not getting to know how much more time my phone will take for a full charge as the msg on lock screen is no more available. I am not disappointed with the hardware but Sony, kindly provide a single stable bug free build of lollipop which can match the quality of Kitkat. Thanks

     It has been posted before, and yes indeed its gone, I hope Sony brings it back, but contact Sony directly with your feedback http://support.sonymobile.com/global-en/contactUs/

  • Notification center: slide to reply not working from lock screen

    Hi,
    The "slide to reply" feature for messages is not working when the iPhone is locked. My Phone is passphrase protected. When I recieve a message and finger swipe the "slide to reply" (via the notification center) when my phone is locked it asks for the password rather than taking me to the message app directly. Is this the expected behaviour?
    Appreciate any comments/suggestions.

    Your iPhone will always ask for the passcode (if you have one) if it is locked.

  • Can't access camera or calculator on locked screen

    Hi, I can't access my Camera or calculator from locked screen, it starts, but goes black after 2 seconds. Iphone 6 Plus ios 8.1.2. Somebody have any tips?
    The only thing i can Access from locked screen is the flashlight.
    It all Works when i slide it open.

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • Just downloaded iOS 5 update to my iPhone4. One new feature is ability to access photo app from lock screen by tapping "camera" icon. Camera icon does not show up on my lock screen. Help?

    Just downloaded iOS 5 update to my iPhone4. One new feature is ability to access photo app directly from lock screen by tapping "camera" icon. Camera icon does not show up on my lock screen. Help?

    Press the home button once to wake the phone into lock mode.  Then press it twice while in lock screen and you will see camera button to right of slide.

  • Using IOS 5, but no camera from lock-screen or Week view in Calendar, as promised. What can I do?

    Using IOS 5, but no camera from lock-screen or Week view in Calendar, as promised. What can I do?

    Thanks. I don't know if it seems obvious to everyone, but it shouldn't be needed to double click to seet it. If anyone finds out why there isn't a week view in the Calendar native app, or a way to make it avaiable I would be thankfull. If not, I will continue using third party app for that purpose.

  • I updated to iOS 5.1 but my camera buttone form the lock screen is not working what should i do

    i updated to iOS 5.1 but my camera buttone form the lock screen is not working what should i do. i tryed restoring but it didnt work .
    When i try the camera loncher  but  it's not working

    i feel stupid now because i didnt know to swipe it up lol
    thanks

  • HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

    I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

    You cannot.
    You cannot use another countrys itunes store.
    You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
    The owners of the distribution rights of movies/music/etc differ by country.  These distributors decide who can sell their content in that country.
    Buy from another source if your countrys itunes store does not carry somehting that you want.

  • Exception "algorithm ARC4 is not available from Provider Cryptix "

    hi all
    i am developing the application in which i am using two encryption/decryption algorithms one is "RC4" and second is "AES(256 bit key)".
    1.first i am taking the credit card number from database which is in
    the encrypted format using 'RC4".
    2.After taking the Credit card number from database i am decrypting them using RC4.
    3. After decrypting them i am encrypting them using "AES(256 bit key") and putting the paymentid and encrypted credit card number in HashMap.
    For that i have written following classes
    RC4EncMemory.java ( which is taking encrypted credit card number from database ,decrypting them using "RC4" and then encrypting them using "AES")
    import java.security.GeneralSecurityException;
    import java.security.Security;
    import java.sql.*;
    import java.util.*;
    import java.util.HashMap;
    import javax.crypto.SecretKey;
    import cryptix.jce.provider.key.RawSecretKey;
    import cryptix.provider.Cryptix;
    public class RC4EncMemory
         DbAccess db=null;
         RC4EncMemory crypt=null;
         PreparedStatement pstmt=null;
         ResultSet rs=null;
         EncryptionPerformance per=null;
         AESEccryption aes=null;
         private String originalCCnumber=null;
         private int paymantid;
         private byte[] b;
         private byte[] aesencrypted;
         public RC4EncMemory()
         {db=new DbAccess();}
         public void selectAllCCNumber()
              HashMap allccnumber=new HashMap(1000);
              String qry =DbAccess.getPropertyValue("cedera.ccnumber.selectccnumberFromPayment");
              System.out.println(qry);
              try
              {rs=db.getResultSet(qry);
              if(rs!=null)
              {     crypt=getInstance();
                   while(rs.next())
                        System.out.println("In while");
                        paymantid=rs.getInt("paymentid");
                        b=rs.getBytes("ccnumber");
                        System.out.println("paymantid >>> " + paymantid);
                        originalCCnumber=DecryptCCNumber(b);
                        Security.removeProvider("RC4");
                        System.out.println("decrypted original >>> " + originalCCnumber);
                        aesencrypted=getAESEncryption(originalCCnumber);
                        //allccnumber.put(new Integer(paymantid),new String(originalCCnumber));
                   Set key=allccnumber.keySet();
                   Iterator i=key.iterator();
                   while(i.hasNext())
                   {System.out.println(" Payment id from HashMap " +(Integer)i.next());
                   System.out.println("Size of the HashMap: >>" + allccnumber.size());
              else
                   System.out.println("empty");
              allccnumber.clear();
              }catch(SQLException exp)
                             System.out.println("Exception in SQL" + exp);
                        finally
                             try{          rs.close();
                                       pstmt.close();
                                       db.conn.close();
                             }catch(Exception er){}
         public String DecryptCCNumber(byte[] encryptedCCNumber)
              {     String decrypted=null;
                   if(encryptedCCNumber!=null)
                   {decrypted = decrypt(encryptedCCNumber);
                   return decrypted;
         public String decrypt(byte data[])
              if(data == null || data.length == 0)
              return null;
              try
                   xjava.security.Cipher cipher = xjava.security.Cipher.getInstance("RC4", "Cryptix");
                   cipher.initDecrypt(rsaKey);
                   byte out[] = cipher.crypt(data);
                   return new String(out);
              catch(GeneralSecurityException se)
              { System.out.println("SecurityException in decrypt method: " + se);
              return null;
         public static synchronized RC4EncMemory getInstance()
              if(_rc4decryption == null)
                   Security.addProvider(new Cryptix());
                   _rc4decryption = new RC4EncMemory();
                   makeRC4Key();
              return _rc4decryption;
    private static void makeRC4Key()
    {          String seed = "CvMjSpVrGsTnAj";
              rsaKey = new RawSecretKey("RC4", seed.getBytes());
    public byte[] getAESEncryption(String originalCCNumber)
    {     aes=AESEccryption.getInstance();
         return aes.encrypt(originalCCNumber);
    public static void main(String args[])
         RC4EncMemory mem1=new RC4EncMemory();
         mem1.selectAllCCNumber();
         private static SecretKey rsaKey = null;
         private static RC4EncMemory _rc4decryption = null;
    In the above programs i am getting the output as follows
    output:-
    in while
    paymantid >>> 3338157
    decrypted original >>> 5856373015065936
    inside encrypt method
    Original Data----->5856373015065936
    Encrypted Data----->[B@3cc0bc
    after encryption of data
    In while
    paymantid >>> 3338169
    SecurityException in decrypt method: java.security.NoSuchAlgorithmException: algorithm ARC4 is not available from provider Cryptix
    decrypted original >>> null
    In while
    paymantid >>> 3338290
    SecurityException in decrypt method: java.security.NoSuchAlgorithmException: algorithm ARC4 is not available from provider Cryptix
    decrypted original >>> null
    my program is able to decrypt the only first credit card numbers using RC4 and then encrypt it using AES(as shown in bold above) but it is not able decrypt the rest of the credit card number from the database using "RC4" and it is throwing above exception regarding the "RC4" algorithm .
    can anybody tell me what is reason behind this exception? my guess is the we cann't use the two providers simultaneously.
    please anybody help me
    AESEccryption.java(which helps to encrypt the credit card number in AES using encrypt method )
    import java.security.GeneralSecurityException;
    import java.security.Security;
    import java.sql.*;
    import javax.crypto.spec.SecretKeySpec;
    import org.bouncycastle.jce.provider.BouncyCastleProvider;
    import cryptix.provider.Cryptix;
    public class AESEccryption
         AESEccryption cryptAES=null;
         AESEccryption cryptAES1=null;
         public AESEccryption(){}
         public static synchronized AESEccryption getInstance()
              {     if(_aesEncryption == null)
                        Security.insertProviderAt(new BouncyCastleProvider(),3);
                        //Security.addProvider(new BouncyCastleProvider());
                        //Security.addProvider(new Cryptix());
                        _aesEncryption = new AESEccryption();
                        makeAESKey();
                   return _aesEncryption;
         private static void makeAESKey()
                   String seed = "FFF3454D1E9CCDE00101010101010101";
                   int length=seed.length();
                   if(length!=32)
                   {     System.out.println("Key size must be 32 characters only");
                        System.exit(0);
                   skeySpec = new SecretKeySpec(seed.getBytes(),0,32,"AES");
    public byte[] encrypt(String data)
         {     if(data == null)
              return null;
              try
              {     System.out.println("inside encrypt method");
                   javax.crypto.Cipher cipher = javax.crypto.Cipher.getInstance("AES");
                   cipher.init(javax.crypto.Cipher.ENCRYPT_MODE,skeySpec);
                   byte out[] = cipher.doFinal(data.getBytes());
                   return out;
              catch(GeneralSecurityException se)
                   System.out.println("SecurityException: " + se);
              return null;
         public static void main(String args[])throws Exception
         {     AESEccryption aesenc=new AESEccryption();
              aesenc.selectAllCCNumber();
              if(flag)
                   System.out.println("Flag " + flag);
         private static SecretKeySpec skeySpec = null;
         private static AESEccryption _aesEncryption = null;
    Regards
    Pandurang
    Message was edited by:
    andylimp12
    Message was edited by:
    andylimp12
    Message was edited by:
    andylimp12

    Hi Nith,
    Previously I have changed the document dispostal time out to 1 year but the error still occurs.
    Now I change the document inline size from 64 KB to 27 MB (estimated max document size) and see how the LCES behaves.
    I suspect if document size is larger than document inline size then LCES will write to some temp file. After that, user does not process the task for a long time, e.g. 3 days. And during the 3 days, the unix system/ websphere auto clear the temp file. After 3 days when user accesses the task again, LCES will complain "document is not in sending server side any more" ....
    I refer to : http://blogs.adobe.com/livecycle/2008/10/livecycle_tuning_knob_default.html
    For the Document sweep interval, I think, it relates Watch Folder, not this error so I don't change it.
    Regards,
    Anh

Maybe you are looking for