IOS 8.0.2 Mailing to group

Hello,
I want to send an email to a group of contacts using Mail on my Iphone 5 with IOs 8.0.2. I created a group in my contacts and synchronized it via ICould. I'm able to select the group using Mail on my Macbook. However it seems impossible to select the group using Mail on my Iphone.
When I'm writing a new email in the "to" box I write the name of the group, but it doesn't show up.
Then I select "+" to get into my contacts. I can go to groups and select the group I want. When I go back to contacts only the contacts of that specific group are shown. But when I select any person from that group, Mail shuts down. I tried it over 10 times with different groups and contacts. What am I doing wrong?
Thanking you in advance,
CB

Just to say that I have exactly the same problem running iOS 8.0.2 on my iphone 4S
This issue was being discussed 6 years ago on this forum. It beggars belief that something so basic has not been fixed on the iPhone.
Group e-mail on the iPhone
Hopefully we're both overlooking something and someone on this forum is about to point it out to us ... but if someone out there could confirm that you simply can't address Groups on your iPhone, that would be helpful!

Similar Messages

Using ios 7.0.4 can a group email be sent either from icloud or iPhone by a means other than selecting the individual Contact, ie; can the group be selected and then an email composed that will send the message to all group members.

Using ios 7.0.4 can a group email be sent either from icloud or iPhone by a means other than selecting the individual Contact, ie; can the group be selected and then an email composed that will send the message to all group members.

Hi Richard,
Thanks for the reply - I think I've sorted it though and there isn't actually an issue.
The whole group wasn't receiving the NDR, only the group manager which I setup a few weeks prior. This is a new feature so it complies with certain RFC's, basically the group manager will recieive the NDR to let them know there is a problem.
Something to do with mass mailing and unsolicited mail.
Ta
Ian

Need to send a mail to group of users when sales order saved

Hi
user requirement is send a mail to group of users when sales order is saved

hi Sanjay,
Have a look on Michal's blog, it's for JMS, but it works for others: [PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean|PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean]
Mickael

Has anyone found a solution to sending mail to groups in Mavericks? I've been given 2 approaches - 1 to type user name group into address and the other to go to address book and right click on group. Neither are satisfactory. Does anyone have a solution?

Has anyone found a solution to sending mail to Groups in Mavericks? I've been given two solutions - neither are satisfactory. One is to type name of group into address line, the other is to go to address book and right click on group.

thanks a lot for your kind help... saved me a lot of time and effort, could not believe it at first that the process is so simple but once i followed the steps it worked fine. appreciate your help.

IOS 5 & Making E-mail adjustments under settings......

I have iPad 2 running iOS 5 and when I attempt to change password under one of my e-mail accounts which I set up on iOS 4.x (Settings> Mail, Contacts, Calendars>), it locks up. How do I remedy this problem?

Known problem. There are many threads on this (did you try a search?)
What you can do is turn Airplane Mode ON, wait 10 secs or so, then back OFF. Don't bother re-creating accounts, restoring, etc. It's a waste of time and will NOT fix anything.
The problem is a crash of an iPhone process that handles Exchange push over cellular. You cannot fix it yourself. The trick above will restart the crashed process (as will a restart), but after some time (minutes or hours) it will crash again. It's a bug Apple created with iPhone 5 push software. It apparently works fine for other models.
If you want to confirm the crashes:
Settings>General>About>Diagnostics&Usage>Diagnostic&Usage Data
Look for apsd_date, where date is the date and time of the apsd (Apple Push Service Daemon) crash. If you have one or more of these, you have the problem.
Apple has to fix it with an iOS update. Many of us have opened support calls and Apple is aware of the bug and are working on it.

Mail Smart Groups

My mail smart groups are too large for server - How do I make smart groups smaller e.g. A-F, G-L, M-S T-Z? Any help appreciated

Just edit the groups and set the criteria such that it only gets those items you want in the group.
You would likely need to create a criteria entry for each letter to include.
Although I don't know of any personally, you may want to get some third-party software that does mass mailings, or subscribe to a mass mailing service.

Since loading iOS 8 my e-mails do not appear on my locked screen.

Since loading iOS 8 my e-mails do not appear on my locked screen.

Hey brianfromkirkcudbright,
Thanks for the question. Let’s check your notification settings for the Mail application, we’ll want to make sure that “Show on Lock Screen” is enabled for the specific account (ex. iCloud):
iOS: Understanding notifications
http://support.apple.com/kb/HT3576
Troubleshooting notifications
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notifications to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
Thanks,
Matt M.

Mail wrongly groups messages in conversation

Hi,
After intalling Yosemite I encoutner a problem with Mail app grouping different messages into conversation.
The problem is that messages are not connected. Sender and recipients are different, mail content is not related.
I've tried rebuilding mailbox, but didn't help.
And on my iPhone it actually works correctly.

I solved my own problem! Go to Mail-> Perferences...-> Viewing and deselect "Include related messages"

HT204150 Does iOS 6 allow you to browse groups? I could do it before with iOS 5 on my 4S. Now I can't.

Does iOS 6 allow you to browse groups? I could do it before with iOS 5 on my 4S. Now I can't.

If you check all the groups then you will see the combined contacts in all of the groups. If you want to see (browse) the contacts in, for example, just one group, only check this one group and tap done. If you check two groups and tap Done you will see the combined contacts belonging to these two groups.
Try checking a single group and uncheck all others, tap Done and you'll see what I mean.

Creating mail enabled groups

Hello,
Is there any way to create e-mail enabled groups using the GroupWise admin
object API or do I have to use some other API?
Our client does not use distribution list but regular groups and selects a
post office in ConsoleOne.
DirXml is not an option.
Cheers
/Henrik

Hello,
I read information about the IDM driver for GW and it is stated that it uses
GW Admin API. If the IDM driver can create a DL by using the GW Admin API,
then we should be able to do the same. I have read part of documentation
from the GW Admin API and found something that might be related to DL
creation. I have pasted below some information. It is taken from document
gwadmenu.pdf from the GW Admin API page 18. Can this be used to create a DL
programatically?
Thanks,
Ionut Marin.
DistributionLists
This large collection contains DistributionList objects.
Properties
The following table lists the properties for this class, along with access
and descriptions.
Methods
DistributionList Add( String ObjName, String DN, [PostOffice PO],
[Domain Dom] )
Creates a DistributionList object with the given ObjName and DN
(distinguished name). See
the table under Remarks.
DistributionList Add( String ObjName, String DN, [String PO],
[String Dom] )
Creates a DistributionList object with the given ObjName and DN
(distinguished name). See
the table under Remarks.
DistributionListsIterator CreateIterator()
Creates a DistributionListsIterator object.
DistributionList Item( String Name, [String PO], [String Dom] )
Returns the DistributionList object with the given Name. See the table under
Remarks.
DistributionList Item( String Name, [PostOffice PO], [Domain Dom] )
Returns the DistributionList object with the given Name. See the table under
Remarks.
DistributionList ItemByDN( String DN, [String Tree] )
Returns the DistributionList object with the given DN (distinguished name).
If no Tree is
supplied, the current tree is assumed.
DistributionList ItemByObjectID( String ObjectID )
Returns the DistributionList object with the given ObjectID.
Remarks
This table applies to the above methods as noted. It shows the parameters
you can use with the
methods depending on where you obtain the DistributionLists object.
"Tommy Mikkelsen" <[email protected]> wrote in message
news:[email protected]...
> Nope......But beleave, but not sure, that the IDM driver for GW can do
> this though.....
>
>
> --
> /Tommy

Multiple copies of mailing list groups in Groupwise

We are running GroupWise 7.0.3 HP 4 client. We have a user who had 4 copies of her mailing list groups in Groupwise. We had her clean up address books, deleteing all but the last entry worked for cleaning. However, when she tries to copy that address bokk out so she can organize better, it makes two copies again.

n kerr <[email protected]> wrote:
> We are running GroupWise 7.0.3 HP 4 client. We have a user who had 4
> copies of her mailing list groups in Groupwise. We had her clean up
> address books, deleteing all but the last entry worked for cleaning.
> However, when she tries to copy that address bokk out so she can
> organize better, it makes two copies again.
>
How is she trying to "copy" that address book? And where exactly is it
making two copies?
Danita - http://www.caledonia.net/blog

TS3899 My iPhone & iPad mail is locked - Press mail app, the screen starts mail, freezes and bounces back to main menu. The fault occurred whilst opening a draft email created in the 'Mail 2 Group' app. Hard reset/reset all/restore backup have no effect -

I installed the Mail 2 Group App on my iPAD, created an email which I saved to the 'Draft' folder, with something over 300 of my contacts in the bcc. On returning to this email, again in my iPad, the screen locked in mail for a few seconds and bounced bak to the main menu. This repeated on my iPhone, on which I have been carrying out my own checks - this includes deleting the Yahoo account, hard reset (red cross and two buttons), restoring a backup and Reset All in settings.
I'm stuck !!

Sending a message with that many addressees may have required more RAM than was available. You can clean up RAM as follows:
Double-press the HOME button
Kill each app by flicking its screen image up
When all apps except the Home screen are closed press HOME
Wait about 2 minutes for the shutdowns to finish
Turn the phone off (hold the SLEEP button until "slide to power off" appears, and do so)
Wait another minute
Turn the phone back on by holding the SLEEP button until an Apple logo appears
Now try to send the mail again. Note that you may have an unrelated problem if this works: Many ISPs (Yahoo included) limit the number of email recipients for a single message as a way to combat spam.

Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0? Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0? Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

@Satterp
Not sure if you were responding to me or OP - my iPhone is on 5.1. The OP at the time of writing was on 5.0.1.
Also, the OP and I had setup our Hotmail as an Exchange server (similar to IMAP), not POP3.

Checking BCC from an iOS device with Exchange Mail

All,
My question is simply, I have an iOS device with Exchange mail configured. From my phone or desktop I send an email with Joe in the "To:" and Mary in the "BCC:".
When I check the Sent items on my phone, and I go to that email, I only see "Joe".
Is this just a limitation within iOS?
More detail:
I'm testing on an iPhone 4S running v6.1.3 and I have my Office 365 account configured as Exchange email.
Thanks all!
-rudy

No.
For obvious security reasons, iOS devices cannot be controlled remotely. Desktop computers and mobile devices do not share all of the same functionality. Mobile devices are somewhat limited compared to a full computer.

Difficulty sending e-mail to group

Attempting to send E-mail to group of approximately 12 people. Get two error messages as to why the message can't be sent: "(1) Message not sent sent SCC1203 and (2) message not sent SCC1204 followed by the name of one of the people I was attempting to send the E-mail to. In the second case I determined that I must have the incorrect E-mail address. Is there an easy way to correct the error so I can get this accomplised? Thank you foryour help.

Both error codes means there is something wrong with the email address you are sending to. Check the email addresses and look for a typo too. While it could be a wrong email address, sometimes it is something as simple as an extra period, double letter,etc.
CC

IOS 8.0.2 Mailing to group

Similar Messages

Maybe you are looking for