IOS 8.0 our apple users and CISCO ISE customized portal [SOLVED]

Hi there guys ,
i wondering why after the update to iOS 8.0 our apple users , cannot
make it to the ISE authentication Portal , we make em connect thru a WLC wich
is redirecting to ISE ( radius server ) the web-auth process,
while if we use the internal portal (PIC2) of wlc 5508 the all process going well
after the update to 8.0 apple IOS , devices can't reach our customized portal
no more.....
anybody experienced the same?
BR
Eugenio

Glad you got it working and good job on finding a solution to your problem (+5 from me). Also, thank you for taking the time to come back and share it.
If your issue is resolved you should mark the thread as "Answered" :)
One thing to also consider is CWA (Central Web Auth) instead of what you are doing which is LWA (Local Web Auth). It is always better to do CWA as there are many benefits to it. 
Thank you for rating helpful posts!

Similar Messages

  • IOS 8.x Apple users and CISCO ISE native supplicant provisioning not working

    Hi there guys ,
    I was wondering if anybody else have the following problem:
    Apple iOS 8.x users are not able to register their devices on the ISE portal (native supplicant provisioning).
    After they receive the redirection from the WLC, they freeze. Apple 7.x users have no problem.
    ISE is version 1.2.1.198 patch 2.  WLC is running 8.0.102.14.
    Anybody experienced the same?
    MB

    I am also running ISE 1.2.1.198 patch 2 with 8.0.100.  I am testing with an iPad running IOS 8.1.  The device will register in the registration portal, but is not being classified as an IOS device within client provisioning, I believe.  It is getting profiled as a workstation even though all apple device profiles are enabled.  I have an authorization policy for registered devices, and ipad, iphone, ios devices to gain access to the network without going through posture assessment.  I then have my posture assessment authorization rules with apple IOS devices set for a ssid native supplicant profile.  I keep getting an error page on the iPad when connecting to the ISE SSID saying "Client Provisioning Portal     ISE is not able to apply an access policy to your log-in session at this time.  Please close this browser, wait approximately one minute, and try to connect again".  It gives this message over and over.  If I turn off the posture checking authorization profiles, the IOS device is selected as a rule further down which tells me that ISE does not recognize it as an IOS device in the profiling or client provisioning.

  • I'm a recently transformed "Windows to Apple" user, and I need to run various Windows software.  Before installing Windows, I would like to hear from experiences from users if it works well.

    I'm a recently transformed "Windows to Apple" user, and I need to run various Windows software.  Before installing Windows, I would like to hear from experiences from users if it works well. Also, I have an "Office for PC" that I need to re-download, however I was advised by someone that this software cannot be downloaded even if I had Windows in my MAC and that I will have to buy a new "Office for MAC" software.  Thanks.

    Yes, what you are looking at will work.  
    "Most of this would be for access to the shared folders which is not the same as RDP, correct?  So i could
    have myself connect from school to pull a word document, my friend connect from home to get the excel spreadsheet for our table top gaming, and my family connect to pull pictures from the shared folder on the server all at the same time.  Because they
    are accessing the shared folders it is not a RDP where they are accessing the server itself for administration."
    This statement is correct.  All of them would be able to be accessing the shared folders at the same time.  This is the purpose of shared folders. 
    "the 1 user and RDP part is where I'm getting a little confused i think.
    For the RDP part I thought that only applied to the server itself and not any of the client computers
    connected to the server.  So you are still limited to the 2 users to connect concurrently to the server or a client computer at any time?"
    Sorry, not trying to confuse you.  You mentioned to connect to a local machine at the same time.  If you are staying away from RDP, then you won't have this issue.  I would keep all shared folders on the server,  not on any workstations.
     You are correct 2 people can be RDP into a server at once.  For client computers (workstations) you are limited to 1 person at a time.  If you setup Anywhere Access correctly,  then your friends and family should not need to RDP into a
    client computer, they should only need to access the shared folders.  
    Something to keep in mind...for Anywhere Access to work, you will need to purchase a public certificate.  You can do this from GoDaddy.com, Comodo or others. I would recommend either Godaddy or comodo.  They make it easy and give plenty of instructions
    on how to obtain the certificate.  You will probably also have to purchase a domain name, and a static IP from your ISP.  To fully do what you are looking at, it will take some out of pocket $$. 

  • Hi, I need to take my daughter off from our Apple account and set up her own. So, delete her from one account and create her own. Realize I sound imbecilic for not knowing how to do this. Any ideas? Thank you so much. Jules

    Hi, I need to take my daughter off from our Apple account and set up her own. So, delete her from one account and create her own. Realize I sound imbecilic for not knowing how to do this. Any ideas? Thank you so much. Jules

    You don't have to take her off your account exactly: she needs to sign out from your account on her computers and devices. Then she can obtain an Apple ID at http://appleid.apple.com and use it to sign into System Preferences or Settings>iCloud.
    However, there are some issue about this. If she has been syncing her calendars and contacts to your account then the data will disappear from her devices, but remain on your account. Individual calendars can be exported  as .ics files and reimported into her account, but if she has her contacts mixed up with yours she will have to enter them individually in the new account (or export yours, import them into hers, and delete the ones she doesn't want.
    More intractable is the email issue. She cannot move an address from your account to hers, so if she has been using a alias on your account to have her own address she cannot transfer it. She will have to create a new email address.

  • Theres are free upgrade for my mac on our apple store and i cant seem to download it, theres are free upgrade for my mac on our apple store and i cant seem to download it

    theres are free upgrade for my mac on our apple store and i cant seem to download it, theres are free upgrade for my mac on our apple store and i cant seem to download it?

    It'd be really helpful it you told us what the upgrade is, which Mac you currently have, and what OS you're currently using. And you only need to say it once.

  • My grandma is a new apple user and she needs help making an apple account.

    my grandma is a new apple user and she needs help making an apple account.

    She should call Apple support or visit the Genius Bar at an Apple store (make an appointment first at http://apple.com/retail). They will walk her through the process.

  • Some  games ask for our apple ID and password. Will it compromise our apple password?

    To play some games installed from the app store, they ask for our apple ID and password. Will this compromised our appleID and password?

    There is no featured tab in my iTunes store. . . and everywhere it shows me signed in. I had downloaded an app for my mother on HER ipad, and that is the only app I have done for her. It shows up on my phone, and now I cannot update any of my apps. I uninstalled that app on my phone, but when I want to update ones I have installed on my phone with my appleid, she keeps showing up.
    Joyce

  • I am a new Apple user and had a visitor, with an iPad, at my house.  I noticed the response time slowed greatly.  I have a Linksys N router and wondered is I need an Apple router to allow the speed to be consistent.

    I am a new Apple user and had a visitor, with an iPad, at my house.  I noticed the response time slowed greatly.  I have a Linksys N router and wondered if I need an Apple router to allow the speed to be consistent.

    I am a new Apple user and had a visitor, with an iPad, at my house.  I noticed the response time slowed greatly.  I have a Linksys N router and wondered if I need an Apple router to allow the speed to be consistent.

  • HT204400 We were watching a movie from iTunes on our Apple TV and it froze with about 10 minutes left... just a spinning disk.  Network was fine, I could run Netflix, I could choose other content... but the movie only gives spinning disk when I go to it.

    We were watching a movie from iTunes on our Apple TV and it froze with about 10 minutes left... just a spinning disk.  Network was fine, I could run Netflix, I could choose other content via AppleTV or iTunes... but the movie only gives spinning disk when I go back to it.  I confirmed settings on AppleTV and reset the unit without any result.  iTunes indicates I have 21 hours left on the rental.  I would like to be able to finish the movie and not have to rent it again.
    Any thoughts?  Anything that needs to be done in Samsung TV settings?

    How did you verify network was fine?
    Netflix adapts to the network whereas iTunes needs a consistently solid connection. What other content did you try?
    What is your current connection via speedtest
    Go to istumbler (Mac) or netstumbler (PC) to get a report of the network
    Make sure DNS is set to automatic.

  • Meraki MDM and Cisco ISE

    Has anyone done an integration of Meraki Systems Manager enterprise MDM and Cisco ISE?   there is absolutely no documentation on the subject except for the Meraki announcement that lists:
    Cisco Identity Services Engine (ISE) integration – allows Systems Manager to directly communicate with ISE for device enrollment and posture assessment

    Hidden in the Meraki blog is this configuration guide for Meraki SM and ISE.
    https://www.dropbox.com/s/4pd2acrni9w9rjr/Meraki%20Wirelessv5.pdf
    Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
    Charles Moreton

  • Get user and Oranization Attributes  from portal channels

    Hello,
    I am trayin to retrieve some user and arganizational attributes from portal channels (2005Q1), but, with directive "<dtpc:getStringAttribute key="attribute"/>, i can not retrieve some importants attributes as "dn" and an custom attribute from the organization that contain user entry, for example, "orgIdSuscriptor".
    i don't know how to retrieve in the same channel some attributes of user entry and some attributes from oraganization entry, any one know how?
    Thank yu very much.

    Thanks that helpful in some ways, but I want to get the page_id. For example, if I create a page with the name PG_DEPT and the display name "Department Page". I need to know how to get the current PG_DEPT name from the API. Also, I will like to get the current URL from the page (http://portal/pls/portal/page=123).

  • Multiple IOS devices with one apple id and different PCs to synch

    I have 2 macs, 1 Apple TV, 2 iPhones, 2 iPads, 3 iPods and 1 windows pc.
    I would like to:
    1) sync each of them with one of the Macs using the same apple Id;
    2) connect with FaceTime with each of them separately (at least the iPads and iPhones);
    3) synch one phone with the Mac for music and my work PC for apps.
    What should I do using my unique apple I'd?
    Txs,
    Roberto

    When you say "sync", are you talking about physically having songs, movies, etc on your computers and devices?  Or simply want to access those files on those computers and devices?  *Syncing is different from Home Sharing but you are in the Home Sharing discussion forum.  That is why I am asking.
    If they are all in the same network and just want to access them or listen/watch them, all you have to do is turn on Home Sharing for all of your machines and devices with the same account.
    For Mac/PC desktops, you can turn on Home Sharing in iTunes 11.  Go to File > Home Sharing > Turn on Home Sharing.  Do this for all machines.  After doing that, you go to the media selector button at the top left to see your Home Shares.  Or you can enable the sidebar by going to View > Show Sidebar.  From there, just connect to your other computers and you will able to listen or watch to your content.
    For your devices, turn on Home Sharing in Settings.  Go to Settings > Music or Video > Home Sharing and enter the same Apple ID and password.  You can listen to songs in Music and watch videos in Video.app.
    For your Apple TV, if it is a 2nd gen ATV or later then you can turn on Home Sharing under Computers in the main screen.  For the 1st gen ATV, you can either share or pair with iTunes.
    If you want to physically have files (this is syncing), then you can sync your devices to the machine you want to sync with.
    With respect to FaceTime, if you want to use FaceTime on your phone with someone but separately on your iPad then you can associate your phone number to FT on your phone and on your iPad, you can use your Apple ID for FaceTime.  That way, if people want to FT on your phone, they should use the phone number to FT.  For iPad, people should enter your Apple ID when doing FT.

  • HT5621 Change I cloud to match apple user and password

    I would like to change I cloud user and pass word, how do I do this

    If you mean on your phone, go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.

  • Hi. I am a new apple user and want to upgrade my Macbook. it is runnumg Macbook OS X 10.5.8 and I want go to Maaverick but dont know how?

    Im a new mac user and dony know how to upgrade my Macbook to Maverick?

    Back up your data, click here, and read the entire page. Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004.
    (109684)

  • Assigning IP addresses to VPN users from Cisco ISE

    Hi all,
    I would appreciate if anyone could share his experience in assigning ip addresses (not static ones, but from a pool) to VPN users. The Radius is Cisco ISE and I am trying to configure this in the Authorization Results Tab. VPN gateway is ASA 8.4.
    Thanks in advance,
    Lora

    Hi Lora,
    Try going through the following link, might be helpful.
    http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_ipep_deploy.html#wp1252535

Maybe you are looking for