IOS 8.1.2 Display Zoomed on Start-Up

Perhaps my iPhone 6 was the only one that did this, but just in case someone else has this problem I am posting the issue. As many folks know, after you update to a new release of software your Touch ID will not open your iPhone. Instead, you need to enter your Lock Screen Code to use your iPhone. The trouble I had was as the new software was installed and then the iPhone screen returned to the lock screen the display was in maximum Zoom mode. There was no way to actually access the numeric keypad to enter the lock screen passcode. If this happens you will need to try to avoid any of the actual numeric keys and tap the screen with three fingers at once. This should un-zoom your screen and allow for the passcode entry.

Greetings hesterma,
Thank you for participating in the Apple Support Communities.
If your iCloud calendar doesn't sync between your iOS devices after updating your iOS software version, see this article for some additional steps that can help:
iCloud: Troubleshooting iCloud Calendar - Apple Support
Best Regards,
Jeremy

Similar Messages

HT201263 I Have an iPhone 5 runnig ios 7.0.4. It wont start as the apple logo keeps on blinking when i connect to wall charger or itunes. I even tried to restore it but an error 21 is being displayed. Any one can help me in this situation

I Have an iPhone 5 runnig ios 7.0.4. It wont start as the apple logo keeps on blinking when i connect to wall charger or itunes. I even tried to restore it but an error 21 is being displayed. Any one can help me in this situation

Read http://support.apple.com/kb/ts3694#

IPhone 6 Display Zoom Known Issues?

I have an iPhone 6 64 GB and have noticed some peculiarities of the display zoom setting (Settings -> Display & Brightness -> Display Zoom -> View). When set to "zoomed" everything is enlarged to the same size of an iPhone 5S. However, when set to "standard", which takes full advantage of the larger display, there appears to be a few issues:
1) Lock screen remains "zoomed" - Look at the top of the iPhone and the cell strength, carrier, WiFi, and time are all larger when locked.
2) Some apps that claim to be optimized for iOS 8 have "zoomed in" look (Facebook, Spotify, anything Google). This also zooms the keyboard. How frustrating !
I was wondering if others are having this same issue. Is this an app developer issue, an iOS 8 for all users, or an issue unique to me? All official Apple apps have appropriate "standard" setting, along with some others (Twitter and Beats Audio).

it happens the same to me. Apple support made me clean restore from DFU mode. Then configured as new iPhone and same thing happens.
The lock screen is zoomed and all no apple apps Except Twitter and telegram.
It's pretty weird. They told me to send it to repair, but I will wait some days and see if there is a software update.

My iPad mini iOS version is 6.0.2 I can't upgrade to iOS 7. Message displayed is "Verification of update failed because you are no longer connected to the internet." This happens while I am connected to the internet. What should I do?

My iPad mini iOS version is 6.0.2 which I can't upgrade to iOS 7. Message displayed during verifying upgrade is "Can't verify upgrade because you are no longer connected to the internet". This happens again and again though I am connected to the internet through wifi. What should I do?

Reset the iPad and try again. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Reset your router and try again. Unplug your router from power for about 30 seconds then plug it in again.
Try another WiFi Network. Go to a friend's house, a library, anywhere else that you can use a trusted WiFi network.
Try updating using iTunes on your computer.

Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!

Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay

Thunderbolt display doesn't start after standby

wakeup the MacBook from standby mode the thunderbolt display will not start since the mountain lion update.
you must unplug and replug the connector for starting the display

I had the same problem with my new MacBook Pro Retina connected to a new Thunderbolt Display running OS 10.8.2. I did resolve the problem after a week or so of troubleshooting, but it did involve getting a resplacement display from Apple.
Here WAS my situation: After connecting the display and having things work (video and external keyboard/mouse and sound/video), when the computer went to sleep (not display sleep, computer sleep) or when it was re-started via the display, I had video but did not have any other external control or display sound/video (was as if the internal hub of the TD was not working).
When I disconnected the Thunderbolt connector (which comes from the "All-in-One" TD cable) from the computer and then plugged in a regular Thunderbolt cable to the computer port and the empty TD Thunderbolt port, all was well. In other words I left the TD Thunderbolt connector disconnected and bypassed it with another Thunderbolt cable between the computer and the TD display port. Note that I left the power connector from the "All-in-One" cable connected as there was no problem with that portion.
This, of course meant that the Thunderbolt part of the All-in-One cable (which is not unpluggable from the display) was bad or the display electronics leading to it was bad. Either way it required a new or repaired display.
I hope this is helpful. After bypassing the All-in-One Thunderbolt interface with my workaround above, I never had the problem occur again (you could command the computer to sleep or re-start it from the display, remove the laptop to use elsewhere, re-connect it, etc. and everything continued to work without fiddling with any connections). As a result, I had Apple replace the display under warranty provisions.
Barry

I purchased i phone 3GS from San francisco thro my brother, when i brought to oman, i want to update ios 5 to ios 6 for that from itunes to start update , finally failed and i could not able to configure in oman wifi network, i dont have backup..help me..

i purchased i phone 3GS from San francisco thro my brother, when i brought to oman, i want to update ios 5 to ios 6 for that from itunes to start update , finally failed and i could not able to configure in oman wifi network, i dont have backup..help me..

Has your phone ever been hacked or jailbroken. This error message is what usually shows up for that. Are you using a supported carrier for the iPhone, or did someone hack the phone to unlock it to be used on another carrier. If that is the case, then there is no help you can get here as discussing hacked/jailbroken devices is not allowed.

Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.

I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
Anyone?
Thanks

Hi Stan.
I had the same problem as you did though I am using Adobe CC. I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version.
Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup ) first and updated my NVidea card to no avail. Eventually what did the trick was this...
After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it. Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again. I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care. That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
Let me know if this works.
Cheers and good luck

I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings

I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings.
Has anyone faced a problem like this!!!

No. If you go Settings App > General > Reset > "Erase All Content and Settings", you will have the same iOS that was on the iPhone when you tapped the Erase button. If you believe your iPhone is Jailbroken, then this will not work. If you use iTunes on computer, this will put iPhone to current iOS which is iOS 7.0.2

IPhone 6 Plus Display Zoom needs an iPhone 5 option.

The standard option is comical. I feel like it's for visually challenged users. I purchased the bigger phone for more real estate, not a larger UI.
A simple third option for Display Zoom would suffice, call it small/tiny if you must (although 'original' would be a better PR move).
Just add more width, not height to the UI. Done.

This is a user-to-user forum. Any Apple Store employees that participate would be doing so as private user, not employees.

I am not able to install asphalt 8 on ios 7 ipad retina display. I am downloading it directly but on the install process it is stuck.

I am not able to install asphalt 8 on ios 7 ipad retina display. I am downloading it directly but on the install process it is stuck.

Try rebooting your iPad by holding down the power and home buttons simultaneously until a blank screen with the Apple logo appears. Ignore the power off slider if it appears. After a while your device should go to the main screen, as if you're turning the iPad on. Don't worry, this won't do anything to your data, it just literally restarts the iPad.

There was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

How do I update my iOS? I have the iPad 1 and have tried over and over to try and update the iOS version to iOS 5.1, nothing works it will start updating then say that it did not update? PLEASE HELP!!!

How do I update my iOS? I have the iPad 1 and have tried over and over to try and update the iOS version to iOS 5.1, nothing works it will start updating then say that it did not update? PLEASE HELP!!! P.s I'm running newest version of iTunes.

Connect your iPad to your computer and let iTunes back up your iPad. After it does that disconnect it and go into your settings under general and under reset and select erase all content. After you do that reconnect to your computer, open iTunes and follow the screen options to set up your iPad as new. Once it is done doing that see if you have the latest version of iOS installed and if it does then either download gain the apps you had before or restore them from the backup made previous.

Display all rows (starting at row 1)

Hi there
How can I create code (with or without the wizard) in Web Application Designer, that will force the table (analysis web item) to display all rows starting at row 1.
The user is initially presented with a table which is, say, limited to 5 lines at a time. Default scrolling / paging functionality is added, which allows them to page down 5 rows at a time.
I want to be able to provide a button which displays all the rows ... normally this would be done by setting BLOCK_ROW_SIZE to 0 if I am correct.
However, what I have found is that simply setting this parameter, displays all the rows, but from the existing row, so if the user had paged down once already, they are shown rows 6 till the end.
I have played with various combinations of DATA_ROW_FROM, DATA_ROW_TO and BLOCK_ROW_SIZE, and none of those combinations seem to work for me.
I would have thought setting the FROM row to 1, the TO row to 0 and the BLOCK size to 0 would do the trick, but that simply shows all the rows from the current position ... again, I want to go back to the first line and then show all.
Putting 2 commands in the button doesn't seem to work either, as the 2nd command seems to override the 1st command.
Any ideas?
Cheers,
Andrew

Come on ... someone must have had to do something like this ...

Hello I have many generation fo ipads few week ago I updated my ipadmini sprint to ios 7.0.4 and my ipad start so slow like a crap I restored them and nothing happened after all of that manipulation I decided to buy a new one mini with retina which same

Hello I have many generation fo ipads few week ago I updated my ipadmini sprint to ios 7.0.4 and my ipad start so slow like a crap I restored them and nothing happened after all of that manipulation I decided to buy a new one mini with retina which works

do you have a question or just wanted to tell that the org ipad mini is slow with ios7 ?
there are guides to inc performance on older ios7 using devices
http://www.phonearena.com/news/How-to-improve-performance-of-iPhone-4-4s-iPad-2- and-iPad-mini-with-iOS-7_id49256

IOS 8.1.2 Display Zoomed on Start-Up

Similar Messages

Maybe you are looking for