IOS 8.1.3 has been released and it addresses FaceTime and Messages sign in issues

If you have been having problems not being able to sign into FaceTime and Messages, or getting error messages with those two apps, download and install iOS 8.1.3.

I Had the exact same problem and after following all the steps at If you get an error when trying to activate iMessage or FaceTime - Apple Support
i did several resets. Nothing seemed to work until I used my iCloud account to sign in rather than my Apple ID I got in. Apple ID did not work at all. Not sure if this will work for you but it did for me ... Good luck!
Edit

Similar Messages

I bought my Ipod touch 4th generation recently and everything was working well. However, it has been 2 weeks since my FaceTime and Imessage aren't working anymore.

Right after I put on my username and password, it says "veryfing" and then it goes back to the log in page. I don't know what's going on at all. My apple ID is ok, since I can purchase apps and other stuff on Itunes. I've used Imessage and FaceTime before, it happened suddenly. Does anyone ever had this problem? Than you.

Try:
iOS: Troubleshooting Messages
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
iOS: Troubleshooting FaceTime

How to find the date on which notification task has been released?

Hi All,
I am an ABAPer, I have a functional doubt. I have got a functional Spec's for which I have to create a report.
Here, I need to retrieve the field for "Date when the notification RECV task has been released".
I have checked and analysed that the data has to be pulled from 'QMEL' and 'AFIH' tables. I have the notification number with me, I need to pull the "Date when the notification RECV task has been released", there are a lot of date fields in QMEL and AFIH tables, I am able to identify the creation date for particular notification. I need to get the release date?
Could someone please help me, what is the field for release date for the notification in these tables (OR) please let me know the transaction be which we can identify the release date for notification task, I'll get the field name from there.
Please help, I dont have any functional consultants around me.
Thanks,
Vishal.

There are no fields for date for release of notification task in these tables.
Please help!!
Edited by: Vishal Saxena on Jun 15, 2009 8:22 PM

Ever since I downloaded IOS 8 my IPad has been slower, stalling and now it completely crashed and I can't restart. It's the Ipad 2. Is there anyway I can do?

Ever since I downloaded IOS 8 my IPad has been slower, stalling and now it completely crashed and I can't turn it on at all! It's the Ipad 2. Is there anyway I can do?

Hey Basketsopugs,
Thanks for the question. I understand you are experiencing issues with a third-party application after the iOS 7 update. The following article outlines the best procedure for troubleshooting this issue:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks,
Matt M.

HT5731 I have pre-bought an album for a March 25 release. But a single has been released from the album and i cant seem to download it, its says $0.99. Do i need to buy the single aswell? Shouldnt I have access to the song becasue i already pre-bought the

I have pre-bought an album for a March 25 release. But a single has been released from the album and i cant seem to download it, its says $0.99. Do i need to buy the single aswell? Shouldnt I have access to the song becasue i already pre-bought the album?

Hello, Edgarflo.
Thank you for visiting Apple Support Communities.
Here is some helpful information regarding preorder albums in iTunes. I would recommend checking to see if you can download the single directly from the preorder album as some artists release a single that is separate from the album and will be a different purchase.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
Cheers,
Jason H.

PR has been released, but i found the plant input is error.

PR has been released, but i found the plant input is error. i want to correct the plant, and i wish the release info is saved, i.e. the manager needn't release the pr again. is it posssible?

Hi,
You can modify the PR but will the changes trigger the Release strategy depends on the configuration which is done in your system.
If the Release Indicator is assigned for triggering the RS if there are any changes in PR the RS will get triggered and if it is not assigned it will not trigger.
Please check the Release indicator configuration on weather the Indcator are set for changes.
Thanks,
Vijay

Since upgrading to 7.0.3 (iPhone 5 64gb, with iTunes Match enabled) all of my music wiped off my phone. Downloading it again, most of the artwork has been mixed up with other artists, and I'm no longer able to stream or download over 3G? Any ideas?

Since upgrading to 7.0.3 (iPhone 5, 64gb, with iTunes Match enabled) almost all of my music has vanished from my phone (weirdly some hasn't).
Downloading it again, most of the artwork has been mixed up with other artists, and I'm no longer able to stream or download over 3G (all tracks greyed out), though my network settings etc are all set correctly.
Lastly since upgrading to iOS 7.0.1 (and beyond) Genuis has become effectively useless: it continually asks me to connect to wi-fi, and if I do it creates playlists mostly composed of tracks by the same artists or those very obviously linked to them- previously it created brilliant, nuanced playlists.
Are these things connected, and how do I fix them?

I have done this on numerous occasions but I think that my Iphone has a defect. After many tries, reinstalls, deletion of content, changing content to be stored on external hard drive, deleting itunes and cleaning computer I managed to get all of the songs on and things seemed okay for a while.
The problem returned about a week ago after downloading a new album from Itunes. I now have 12.5k of songs leaving 10gb spare on Iphone which should be more than enough room to operate properly. Last night it seemed to be dowloading ok (after doing all of the above again for the umpteenth time) this morning it revealed that it had just synched 2.5k of songs and 18gb of "other" on the contents bar. it wont synch now as it says its over capacity. So the 18gb of "other" would probably be corrupted data that means it must corrupt each song as it tries to synch it.
The 2.5k of songs it did synch are working on the Iphone as is every song in the library on Itunes. I did completely delete the new album I bought and redownloaded it from the store then tried to synch just that album and it worked fine.
Just about time to dump apple I think!

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet?

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet? Am I wrong or was support for the D810 available far more quickly?

ACR 8.7 has not yet been released. The ACR 8.7RC has been released. It is a Release Candidate - and as such, is not a final version. I wouldn't be concerned about a lack of Lightroom support until a final version is released.
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs

F110 - Payment Run has been released error

Hi,
When we are executing payment run F110, after parameter entered & payment proposal is created it gives an message payment run has been released without
payment proposal edited & payment run carried out.
pl. help me in this regard.
thank u
regards
santosh

hi Chenu,
thanks for reponse immediately, can u kindly tell in detail why it will go to released state and how to overcome this problem, it happen occassionally not regularly.
thank u
regards
santosh

The iOS 8.0.2 has been downloading for an hour on my iPad, is that normal?

The iOS 8.0.2 has been downloading for an hour on my iPad, is that normal?

Yes. Your product list shows that you're currently running iOS 7.1.2, and whenever you make a major update, i.e. iOS 7 to 8, it's a large file which can take a while to download.

Running F110 with message "Proposal has been released 07/22/10 06:42:33"

Dear experts,
When I made proposal through F110, it shows me "Parameters have been entered", then after setting the related parameters, I tried to run Proposal with check on "Start immediately", then the message "Proposal has been released 07/22/10 06:42:33" appears, I also check SM37, but I can not get the spool list.
What could be the reason?
Thank you!

In the first tab of your F110 screen, you'll get the status of your processing. It will update for each event. Check if you are getting things like the following.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
Payment run has been carried out
Posting orders: 1 generated, 1 completed
If you are not getting any of the above, you can check that step and analyse the log.
Since you are getting as released, i think the proposal run has not carried out.
Ravi.

ContactSheet X (CSX) v1.4 has been released

ContactSheet X (CSX) v1.4 has been released.
The biggest change with this rev is the addition of PSCS4
support. Other changes include better support for metadata in captions
and templates, improved color profile handling, and improved error
handling. A complete list can be found in the Release Notes link
below.
Download Page
https://sourceforge.net/project/showfiles.php?group_id=173281&package_id=207621
Release Notes and Change Log
https://sourceforge.net/project/shownotes.php?group_id=173281&release_id=641810
Home Page (includes link to PDF docs)
http://ps-scripts.sourceforge.net/ContactSheetX/csx.html
This has been tested on PSCS3/4 on OS X and XP. It may still work with
CS2, I just haven't tested it there this time around.
As always, let me know if you find any problems.
-X

[email protected] wrote:
> I ran this script but I am running into a problem. How come it only does the first five documents in the folder. It will not do that rest. Is there something I have to modify?
Email me me the ContactSheetX.log file (see the README file for its location on
your system) and I'll see if I can determine what's going wrong.
-X (xbytor at gmail dot com)

Run MRP for production order/maintenance order has been release

Hi all,
please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
Thanks all

Hi Hoai,
It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
Material Requirements Planning (PP-MRP)
   Planning Process
     Net Requirements Calculation
       Net Requirements Calculation for MRP
But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
consider it.
Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
Regards,
Rachel

Now that OSX Mountain Lion has been released, can I still buy OSX Lion to update my 2009 Mac?

I have a 2009 MacBook running OSX Snow Leopard with the latest update. I wanted to upgrade to the new Mountain Lion but I got the message that my system couldn't run it. So now I'm wondering if I can upgrade to the Lion 10.7 OS but I can't find it anywhere in the iTunes store or the Apple online store. Plenty of places to download the 10.7.x upgrades but not the OS. So, is it no longer available now that Mountain Lion has been released? Or do I have to visit a store to buy the disk?

You have to Call Apple, 1-800-My-Apple, and order it over the phone. Apple will then send you a email with a Code in it to download it from the MAS.

Itunes is saying that 11.0.5 is the most current version on my mac book pro even though 11.1 has been released. what gives?

itunes is saying that 11.0.5 is the most current version on my mac book pro even though 11.1 has been released. what gives?

Hey Blake Placid,
Thanks for the question. If you have not already done so, I would download and install iTunes directly from the following link:
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Thanks,
Matt M.

IOS 8.1.3 has been released and it addresses FaceTime and Messages sign in issues

Similar Messages

Maybe you are looking for