IOS 8.1 Mail is fetching then dropping e-mails

iPad 2 running IOS 8.1.
Last night I notced that a 6 hour chunk of e-mails didn't show up on my iPad. They should've downloaded throughout the day. I use POP3 not IMAP (please let this be). My settings are to fetch every 30 minutes. The same e-mails appear fine on my iPhone (still on IOS 7), in Outlook on my Windows PC, and on my ISP's webmail site. I guessed that the fetching wasn't working but now I think that was wrong.
Tonight, the first time that I opened Mail I watched the screen and saw a few e-mail headers flash by. I recognized them as e-mails I had seen on my iPhone. Once the fetch process finished, those e-mails were not display and the most recent one shown was from this morning. Again my iPhone, Outlook, on PC, and webmail all seems to be complete and match.
i have had this configuration for over 2 years. Even if my ISP goes down/out while my iPad is at home and virtually idle all day, once it's back up/on Mail catches up. I have never lost e-mails like this before.
Thanks in advance for any help you can provide;:)

Niznolwd,
I just figured out my issue, which was pretty much the same as you.
The only thing I'm using iCloud for is Find My iPhone and Keychain.
In my iCloud setting, it says that Keychain is on, but when I went in to look at the settings, the iCloud Keychain was off.
I turned it on and it would not accept my password.
So I went to the iCloud website and tried to login. It said my account was disabled for security reasons and to go to iforgot.apple.com
I unlocked my account and entered the password on my iPhone.
The prompts for my iCloud password has stopped.
Hope this helps,
Paul K

Similar Messages

HT4623 I am trying to update my i-phone 4 with IOS 7.1.1 it has twice got 400mB in to the 1.3GB update and then dropped out with an "error has occured" message.....any ideas?

I-phone 4........I am being auto-prompted to update my IOS from 7.1 to 7.1.1. Each time I try to do that on i-tunes it gets to about 400Mb of the 1.3Mb file and then drops out with an "error has occured" message. I have 5Gb free space on the phone. I have tried to do that wirelessly also and it says "an error has occured while checking for a software update"........does anyone have any ideas?....thanx

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Why is the battery percentage on my iPhone 4S on iOS7 freezing then dropping in big 10/20% chunks?

Since upgrading to iOS7 my 4s has been having issues with battery meter. Take today for instance, it fell steadily to 59% then dropped instantly to 39% (I was not using any apps at the time). It has now been stuck on 32% for over half an hour, I've taken photos, used YouTube and other apps in an attempt to drain it but no change.
I've turned off all unnecessary processes, including location services and background refresh to eliminate drain. System status meter shows processor operating at 10% when no apps open so it doesn't look like background processes are draining.
I can't rely on the battery meter when it isn't accurate, it could suddenly drop to 5% or similar without warning.
Is anyone else having these problems? Any ideas Apple?
It's going to render my phone untrustworthy and inaccurate.

Hi!
I am having similar issue.
I have upgraded my iPhone 4s to the new iOS 7 and since then my battery indicator is stucked at 44%. Now regardless how much I charge or how much I use, it is showing the same battery level.
Although this get refreshed when I restart the iPhone and it shows the current battery level and then again stucks at the same percentage. This was working fine on iOS 6.1.3, but is showing issues after the upgrade.
I have tried to restore it, reset settings by selecting Erase All Content and Settings, hard reset (power+home button for 10 sec) but still no good, it shows the same level of battery percentage at which it is since last reboot.
Although I was having iOS 6.1.3 ispw so I downgraded it again as Apple was signing iOS 6.1.3 at that time. Now the battery percentage is working fine. Therefore its not a hardware issue for sure and is just some bug with iOS 7.
Now I have again upgraded to iOS 7.0.3, and I am facing the same issue again. And now I can't even downgrade to iOS 6.1.3.
If you get some tips on how to solve this, then please share the same.

Since I have updated IOS 6 my mail does not work, it keeps telling me my user name and password is incorrect.

Since I have updated my iPad to iOS 6 my mail will not work, so I deleted my account and added a
New, now it says my username and password is incorrect. But my username and password are correct.
Does anybody have a solution?

May be something here.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this: Delete the account in Mail and then set it up again.
 Cheers, Tom

When I try to open the "markets" page on the Firefox hompage, it displays for 3 or 4 seconds and then drops off; I get a white screen; this does not happen with Explorer.

When I open "markets" from the homepage, it comes up but drops off after a few seconds and
I get a white page. This does not happen with Explorer. A similar but much more extensive
problem happened a month or so ago (I couldn't open attachments). I called Microsoft and the
fellow messed about with my computer for an hour or so, but ended up saying he couldn't help
me. However, when he went away, the problems went away.
== This happened ==
Every time Firefox opened
== two weeks ago?

~~red:'''''displays for 3 or 4 seconds and then drops off'''''~~
If you have RealPlayer Browser Record Plugin '''extension''', disable/remove the RealPlayer Browser Record Plugin extension in the RealPlayer Preferences (RP: Tools > Preferences > Download & Recording) . Restart Firefox and test.
See Noah_SUMO's illustrated answer in this thread if the above is not clear: https://support.mozilla.com/en-US/forum/1/557689?
The RealPlayer Browser Record Plugin '''extension''' adds some extra features like saving media files.
Be sure not to get confused with the RealPlayer '''plugin''' (Tools > Add-ons > Plugins) that plays media files.
https://support.mozilla.com/en-US/forum/1/557689?
http://support.mozilla.com/en-US/forum/1/459823
https://support.mozilla.com/en-US/forum/1/446905?
https://support.mozilla.com/tiki-view_forum_thread.php?forumId=1&comments_parentId=472596
http://support.mozilla.com/en-US/forum/1/461211
http://support.mozilla.com/en-US/forum/1/376867
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]].
~~red:'''''Other Issues'''''~~: to correct security/stability issues
'''Update Java''': your ver. 1.6.0.17; current ver. 1.6.0.20 (important security update 04-15-2010)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''Update Shockwave for Director''': your version 11.0; current version 11.5
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
IMPORTANT: I have found it wise to always restart your system after doing anything with Adobe products.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''

HT4623 can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same proble

can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3

Try a new SIM from your carrier. If that doesn't work, make a Genius Bar appointment and get your phone evaluated.

How to drag image in left panel then drop into right panel??

Dear friends.
I have following code, it is runnable, just add two jpg image files is ok, to run.
I tried few days to drag image from left panel then drop into right panel or vice versa, but not success, can any GUI guru help??
Thanks.
Sunny
[1]. main code/calling code:
import java.util.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class ImagePanelCall extends JComponent {
 public JSplitPane ImagePanelCall() {
 setPreferredSize(new Dimension(1200,300));
 JSplitPane sp = new JSplitPane();
 sp.setPreferredSize(new Dimension(1200,600));
 sp.setOrientation(JSplitPane.HORIZONTAL_SPLIT);
 add(sp);
 ImagePanel ip = new ImagePanel();
 ImagePanel ip1 = new ImagePanel();
 ip.setPreferredSize(new Dimension(600,300));
 ip1.setPreferredSize(new Dimension(600,300));
 sp.setLeftComponent(ip);// add left part
 sp.setRightComponent(ip1);// add right part
 sp.setVisible(true);
 return sp;
 public static void main(String[] args) {
 JFrame frame = new JFrame("Test transformable images");
 ImagePanelCall ic = new ImagePanelCall();
 frame.setPreferredSize(new Dimension(1200,600));
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 frame.getContentPane().add(ic.ImagePanelCall(), BorderLayout.CENTER);
 frame.pack();
 frame.setVisible(true);
}[2]. code 2
import java.util.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class ImagePanel extends JComponent {
 private static final Cursor DEFAULT_CURSOR = new Cursor(Cursor.DEFAULT_CURSOR);
 private static final Cursor MOVE_CURSOR = new Cursor(Cursor.MOVE_CURSOR);
 private static final Cursor VERTICAL_RESIZE_CURSOR = new Cursor(Cursor.N_RESIZE_CURSOR);
 private static final Cursor HORIZONTAL_RESIZE_CURSOR = new Cursor(Cursor.W_RESIZE_CURSOR);
 private static final Cursor NW_SE_RESIZE_CURSOR = new Cursor(Cursor.NW_RESIZE_CURSOR);
 private static final Cursor NE_SW_RESIZE_CURSOR = new Cursor(Cursor.NE_RESIZE_CURSOR);
 public Vector images;
 * Create an ImagePanel with two images in.
 * A MouseHandler instance is added as mouse listener and mouse motion listener.
 public ImagePanel() {
 images = new Vector();
 images.add(new TransformableImage("swing/dnd/Bird.gif"));
 images.add(new TransformableImage("swing/dnd/Cat.gif"));
 setPreferredSize(new Dimension(600,600));
 MouseHandler mh = new MouseHandler();
 addMouseListener(mh);
 addMouseMotionListener(mh);
 * Simply paint all the images contained in the Vector images, calling their method draw(Graphics2D, ImageObserver).
 public void paintComponent(Graphics g) {
 Graphics2D g2D = (Graphics2D)g;
 for (int i = images.size()-1; i>=0; i--) {
 ((TransformableImage)images.get(i)).draw(g2D, this);
 * Inner class defining the behavior of the mouse.
 final class MouseHandler extends MouseInputAdapter {
 private TransformableImage draggedImage;
 private int transformation;
 private int dx, dy;
 public void mouseMoved(MouseEvent e) {
 Point p = e.getPoint();
 TransformableImage image = getImageAt(p);
 if (image != null) {
 transformation = image.getTransformation(p);
 setConvenientCursor(transformation);
 else {
 setConvenientCursor(-1);
 public void mousePressed(MouseEvent e) {
 Point p = e.getPoint();
 draggedImage = getImageAt(p);
 if (draggedImage!=null) {
 dx = p.x-draggedImage.x;
 dy = p.y-draggedImage.y;
 public void mouseDragged(MouseEvent e) {
 if (draggedImage==null) {
 return;
 Point p = e.getPoint();
 repaint(draggedImage.x,draggedImage.y,draggedImage.width+1,draggedImage.height+1);
 draggedImage.transform(p, transformation,dx,dy);
 repaint(draggedImage.x,draggedImage.y,draggedImage.width+1,draggedImage.height+1);
 public void mouseReleased(MouseEvent e) {
 Point p = e.getPoint();
 draggedImage = null;
 * Utility method used to get the image located at a Point p.
 * Returns null if there is no image at this point.
 private final TransformableImage getImageAt(Point p) {
 TransformableImage image = null;
 for (int i = 0, n = images.size(); i<n; i++) {
 image = (TransformableImage)images.get(i);
 if (image.contains(p)) {
 return(image);
 return(null);
 * Sets the convenient cursor according the the transformation (i.e. the position of the mouse over the image).
 private final void setConvenientCursor(int transfo) {
 Cursor currentCursor = getCursor();
 Cursor newCursor = null;
 switch (transfo) {
 case TransformableImage.MOVE : newCursor = MOVE_CURSOR;
 break;
 case TransformableImage.RESIZE_TOP : newCursor = VERTICAL_RESIZE_CURSOR;
 break;
 case TransformableImage.RESIZE_BOTTOM : newCursor = VERTICAL_RESIZE_CURSOR;
 break;
 case TransformableImage.RESIZE_LEFT : newCursor = HORIZONTAL_RESIZE_CURSOR;
 break;
 case TransformableImage.RESIZE_RIGHT : newCursor = HORIZONTAL_RESIZE_CURSOR;
 break;
 case TransformableImage.RESIZE_TOP_LEFT_CORNER : newCursor = NW_SE_RESIZE_CURSOR;
 break;
 case TransformableImage.RESIZE_TOP_RIGHT_CORNER : newCursor = NE_SW_RESIZE_CURSOR;
 break;
 case TransformableImage.RESIZE_BOTTOM_LEFT_CORNER : newCursor = NE_SW_RESIZE_CURSOR;
 break;
 case TransformableImage.RESIZE_BOTTOM_RIGHT_CORNER : newCursor = NW_SE_RESIZE_CURSOR;
 break;
 default : newCursor = DEFAULT_CURSOR;
 if (newCursor != null && currentCursor != newCursor) {
 setCursor(newCursor);
 public static void main(String[] args) {
 JFrame frame = new JFrame("Test transformable images");
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 frame.getContentPane().add(new ImagePanel(), BorderLayout.CENTER);
 frame.pack();
 frame.setVisible(true);
}[3]. code 3
import java.awt.*;
import javax.swing.*;
import java.awt.image.*;
public final class TransformableImage extends Rectangle {
 public static final int MOVE = 0;
 public static final int RESIZE_TOP = 10;
 public static final int RESIZE_BOTTOM = 20;
 public static final int RESIZE_RIGHT = 1;
 public static final int RESIZE_LEFT = 2;
 public static final int RESIZE_TOP_RIGHT_CORNER = 11;
 public static final int RESIZE_TOP_LEFT_CORNER = 12;
 public static final int RESIZE_BOTTOM_RIGHT_CORNER = 21;
 public static final int RESIZE_BOTTOM_LEFT_CORNER = 22;
 public static final int BORDER_THICKNESS = 5;
 public static final int MIN_THICKNESS = BORDER_THICKNESS*2;
 private static final Color borderColor = Color.black;
 private Image image;
 * Create an TransformableImage from the image file filename.
 * The TransformableImage bounds (inherited from the class Rectangle) are setted to the corresponding values.
 public TransformableImage(String filename) {
 ImageIcon ic = new ImageIcon(filename);
 image = ic.getImage();
 setBounds(0,0,ic.getIconWidth(), ic.getIconHeight());
 * Draw the image rescaled to fit the bounds.
 * A black rectangle is drawn around the image.
 public final void draw(Graphics2D g, ImageObserver observer) {
 Color oldColor = g.getColor();
 g.setColor(borderColor);
 g.drawImage(image, x, y, width, height, observer);
 g.draw(this);
 g.setColor(oldColor);
 * Return an int corresponding to the transformation available according to the mouse location on the image.
 * If the point p is in the border, with a thickness of BORDER_THICKNESS, around the image, the corresponding
 * transformation is returned (RESIZE_TOP, ..., RESIZE_BOTTOM_LEFT_CORNER).
 * If the point p is located in the center of the image (i.e. out of the border), the MOVE transformation is returned.
 * We allways suppose that p is contained in the image bounds.
 public final int getTransformation(Point p) {
 int px = p.x;
 int py = p.y;
 int transformation = 0;
 if (py<(y+BORDER_THICKNESS)) {
 transformation += RESIZE_TOP;
 else
 if (py>(y+height-BORDER_THICKNESS-1)) {
 transformation += RESIZE_BOTTOM;
 if (px<(x+BORDER_THICKNESS)) {
 transformation += RESIZE_LEFT;
 else
 if (px>(x+width-BORDER_THICKNESS-1)) {
 transformation += RESIZE_RIGHT;
 return(transformation);
 * Move the left side of the image, verifying that the width is > to the MIN_THICKNESS.
 public final void moveX1(int px) {
 int x1 = x+width;
 if (px>x1-MIN_THICKNESS) {
 x = x1-MIN_THICKNESS;
 width = MIN_THICKNESS;
 else {
 width += (x-px);
 x = px;
 * Move the right side of the image, verifying that the width is > to the MIN_THICKNESS.
 public final void moveX2(int px) {
 width = px-x;
 if (width<MIN_THICKNESS) {
 width = MIN_THICKNESS;
 * Move the top side of the image, verifying that the height is > to the MIN_THICKNESS.
 public final void moveY1(int py) {
 int y1 = y+height;
 if (py>y1-MIN_THICKNESS) {
 y = y1-MIN_THICKNESS;
 height = MIN_THICKNESS;
 else {
 height += (y-py);
 y = py;
 * Move the bottom side of the image, verifying that the height is > to the MIN_THICKNESS.
 public final void moveY2(int py) {
 height = py-y;
 if (height<MIN_THICKNESS) {
 height = MIN_THICKNESS;
 * Apply a given transformation with the given Point to the image.
 * The shift values dx and dy are needed for move tho locate the image at the same relative position from the cursor (p).
 public final void transform(Point p, int transformationType, int dx, int dy) {
 int px = p.x;
 int py = p.y;
 switch (transformationType) {
 case MOVE : x = px-dx; y = py-dy;
 break;
 case RESIZE_TOP : moveY1(py);
 break;
 case RESIZE_BOTTOM : moveY2(py);
 break;
 case RESIZE_LEFT : moveX1(px);
 break;
 case RESIZE_RIGHT : moveX2(px);
 break;
 case RESIZE_TOP_LEFT_CORNER : moveX1(px);moveY1(py);
 break;
 case RESIZE_TOP_RIGHT_CORNER : moveX2(px);moveY1(py);
 break;
 case RESIZE_BOTTOM_LEFT_CORNER : moveX1(px);moveY2(py);
 break;
 case RESIZE_BOTTOM_RIGHT_CORNER : moveX2(px);moveY2(py);
 break;
 default :
}

I gave you a simple solution in your other posting. You never responded to the suggestion stating why the given solution wouldn't work, so it can't be that urgent.

I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do?

I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.

Your warranty includes 90 days of phone support. Contact Apple.

For the past few hours I have been trying to download ios 7.0.4 from itunes onto my iPhone after trying many times it would give me a error saying network failed! then i tried to download Ios 7.0.4 manually and then put it on but it keeps failing?

For the past few hours I have been trying to download ios 7.0.4 from itunes onto my iPhone after trying many times it would give me a error saying network failed! then i tried to download Ios 7.0.4 manually and then put it on but it keeps failing? i have tried everything that i have came across and nothing seems to work please help!

I venture to say you have a Windows PC.
If so, before beginning the download try temporarily disabling your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with the insecure OS your computer is running.

I recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

i recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

fingers crossed, it appears they are working the bugs out of this update....i was able to post a pic to my newsfeeds/time line this morning....first the picture went into the ios album but within a minute, it appeared on my timeline! im glad ...

I updated to ios 8.3 yesterday. Since then, i have no connection to internet. My iphone 6 shows "no service". Why?

I have updated to IOS 8.3 yesterday. Since then, I have problem connecting to internet. My Iphone 6 is showing "no service" for coverage status. Why?

I have the same problem too now. I can connect to my wifi at home just fine but as soon as I switch it off and leave the house, none of my apps load (facebook, youtube, etc). I have reset my network settings, rebooted my phone several times, turned airplane mode on and off, turned airplane mode on and off and then did a restart. Still nothing. I also wasn't receiving any text messages but could still facetime, and send a different text message that's considered a "message" and not a text.

Previously i use ios 4 version 4.2.1 then i updated to 4.3.3 the problem is my network coverage sometimes not in service or no network?now i update to ios 5 its still happend?can advice me..

Previously i use ios 4 version 4.2.1 then i updated to 4.3.3 the problem is my network coverage sometimes not in service or no network?now i update to ios 5 its still happend?can advice me..

Scroll down and see the "Update Your Device Using iTunes" section here:
HT4623
There is no "update icon" in iOS versions earlier than iOS 5.
The update is very large (over 1.2 gigabytes). You need a good internet connection to download it to your computer. Maybe you'll need to take a trip to a city to get a good enough connection.

With the new iOS 7, in Mail I no longer see the count of emails, is there a way to make that appear?

with the new iOS 7, in Mail I no longer see the count of emails, is there a way to make that appear?

I stopped at the local Apple Store. Three salespeople heard my question and they agreed that the email count is not accesssible in iOS 7. Furthermore, it is not possible to control the number of messages held on the Apple device. It was possible in iOS 6, as one of the salespeople demonstrated. Since that is the case, what is the number of emails stored in iOS 7? If it varies, what determines the number that are stored? I do not want to set up an email account with 7000 to 8000 existing emails and wonder what will happen.

I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop ("CS5" won't do for instance; we would need CS5 vers 12.0.2 or whatever) and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

On the iPhone 5s, performing any edit on a black and white photo will render a strong purple tone. This occurs in any app under the current iOS. Sadly, every photo must then be re-edited to restore the original black and white.

On the iPhone 5s, performing any edit on a black and white photo will render a strong purple tone. This occurs in any app under the current iOS. Sadly, every photo must then be re-edited to restore the original black and white. If others have experienced similar troubles, any feedback would be greatly appreciated.

Hi everyone, I'm the one from the example above posted by @frankensinatra and I can confirm having the same problem.
But I want to add something. The problem is not only related to black and white but to every picture, and it can be worse or not depending on the range of colors involved. Apparently, there is a shift between some RGB value that is going to remove some green producing a magenta look.
I've started contacting some developer about this problem and some of them is trying to understand what's going on.
In my case, the problem came up when I bought the new iPad mini Retina. I didn't have this problem with the previous iPad mini. Same OS for both devices.
The photo you see in the link above is a perfect example of what happens just going from one app to another and saving to the camera roll. In that case, the situation doesn't change if I send that picture from within the app by email, or to another app using the "open in..." feature. It keeps being purple. And the problem can be reproduced all the time.
Have some of you noticed the same?

IOS 8.1 Mail is fetching then dropping e-mails

Similar Messages

Maybe you are looking for