IOS 8.2 and cellular data problem Iphone 5

Hi team,
I am using Apple 5 32GB, recently I upgraded to IOS 8.2.
From that date onwords my Cellular data is not enabled. It enabled after I restart the mobile. after some time again same proble.
Please look into this issue.
Regards,
Sri.

Does that mean it will not turn on? Does this mean you cannot see the on/off switch in Cellular? Does this mean it is on but not working? Please provide more information if you would like someone to help.

Similar Messages

  • IOS 8.2 and cellular data problem

    Sorry for my broken english.
    I'm using Ipad mini - cellular data + wifi -16GB
    I have a problem with my ipad, when i try to upgrade ios 8.2 , a sign say that ''unable to install update'' and give me 2 choice which is''Close'' or ''settings''(setting means back to GENERAL again) .So i just ignored because i get info from one of the website say ''be patient,because many people try to download i.o.s 8.2'' and when i try to use CELLULAR DATA ,it appear searching....... keep searching until an hour.  I have try reboot 2/3 times but still my Cellular data still searching.....but my Wifi lines no problem .
    Can someone help me .

    I have try to turning off and on but no use because is still keep searching and till now while the ios cannot to install update even thought i have delete some of my application to upgrade.
    But when i take my sim and use to my phone, it work and when i insert back to my ipad i keep telling ''searching'.....''

  • Turn off phone capability of iPhone and continue using cps and cellular data?

    Can I turn off phone capability of any iPhone and continue using cps and cellular data, practically using the device as iPad? Is this going to be possible with iOS8 or iPhone 6 Plus?

    This could be what you are looking for:
    Using an iPhone without a wireless service plan

  • No SIM message and Cellular Data grayed and unresponsive, what is going on?   My cellular data quit working as I sat on the Mexican border.  Took to ATT store and they said this is common problem near the border.  They fixed, but it failed in Mexico.

    I purchased a domestic and international cellular package from ATT.  Domestic worked for two days as I drove toward Mexico.  As I sat two miles from border I tried to us cellular data again, but got No SIM message and cellular data switch greyed,.  I called ATT and they told me to move away from border and try again.  Didn't work.  Called ATT back and they said go to ATT store in Sierra Vista, AZ.  Lady there fixed and told me, "You are good to go."  But she cautioned not to use until well into Mexico as sometimes domestic and international packages get confused near the border.  I waited until I was about a hundred miles below the border and tried.  Same message and same greying of cellular.  Took to ATT when I returned.  They changed SIM card and said problem is with Apple.  Took to Apple and they say problem is with ATT.  The fact that the ATT rep in Sierra Vista fixed makes me think it  is software.  I see that similar problems are common but solutions are vague and varied.  Help please.

    Has any had you try a reset yet? Sometimes the WiFi & Cellular anntennas get wacky.
    Hold Sleep/Wak & Home buttons until the screen goes dark and you see the Apple logo

  • Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening.  I'm with Sprint if that makes any difference.

    Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening.  I'm with Sprint if that makes any difference.

    Are you in an area where there is no coverage?
    You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    If that doesn't help, then yOu'll need to contact Sprint again.

  • IOS 5.1 using cellular data with no apps open

    Just upgraded iphone 4s to iOS 5.1.  Now when I am not connected to wifi, my cellular data usage is constant and rapid.  No apps are open, no data usage that I am aware of.  But when I check the cellular data usage, it goes up by about 1MB every minute.  Just the day before on iOS 5.0, no cellular data would be used with all apps closed.

    Iphone 3GS. updated to iOS 6.0.1 Friday. Data usage until then about 300MB
    Sunday Morning around 4am. Phone incredibly hot even though connected to charger and home Wifi network. Usage exceeds 3GB for month and extra 3.5GB. Total usage in 12 hours 6.5GB.
    Sunday afternoon after receiving message from AT&T about excess data, turned off Cellular Data and 3G and limited to only Wifi.
    Monday evening 2GB cellular data. Total data usage in 2 days 9GB????? W/T/F ???
    Even when 3G and cellular data is turned OFF, 2GB used up?
    Now, turned OFF Cellular data and Wifi and using it as a regular phone with texting and calling. Maybe will buy a regular phone and be done with all these useless charges. Someone should be held accountable here.
    PO.

  • There should be a way to easly switch between wifi and cellular data

    I think apple should put wifi icon and cellular data icon on the notification bar so we can change between them easily or even closing them both. So other smart phone like Samsung did it from a long time and its really easier way so Apple as the greatest company in the smart phones field should do something for this ..

    Read http://www.apple.com/ios/ios7/features/ and in particular the section on control centre.  Maybe that does it for you but you will have to wait until Sep/Oct for the public release

  • IOS 6.0.1 cellular data account info not available for set up

    Just upgraded to iOS 6.0.1 and cellular data was greyest out. I have done a hard reset and it is back up, but now the view my account is not available so I cannot set up with Verizon. . Any ideas?

    So, I did the restore and now my iPad 3 is stuck on the activation screen, saying my "...iPad could not be actiated because the activation server is temporarily unavailable.  Try connecting your iPad to iTunes to activate it, or try again in a couple of minutes."
    I have tried repeatedly after waiting a couple of minutes.  iTunes says they are sorry and "cannot continue with activation at the time.  Try again later or contact customer support."
    Any other ideas outside contacting tech support?

  • HT4203 what is the difference between turning off "enable 3G" and "cellular data"

    what is the difference between turning off "enable 3G" and "cellular data"?

    Turning enable 3G off turns 3G network access off. This does not prevent the iPhone from internet access via your carrier's EDGE or GPRS network which is much slower.
    Turning Cellular Data off turns cellular data off completely. No internet access via your carrier's cellular network.

  • When i go to sync my apps with my computer it tells me  ''are you sure you want to sync apps ? all exsisting apps and there data on (iphone) will be replaced with the apps on this itunes library'' does this mean all my data will be lost if i continue ?

    when i go to sync my apps with my computer it tells me  ''are you sure you want to sync apps ? all exsisting apps and there data on (iphone) will be replaced with the apps on this itunes library'' does this mean all my data will be lost if i continue ?

    Regarding your broken, previously authorized computer, here's how that works:
    You would authorize your new computer -- maybe you've done that already.  Then you will have two computers authorized.  Apple allows you to have up to five computers authorized at any time.  If you get to five, you can then go to your account details in iTunes and remove all authorizations.
    Bear in mind this is not saying you can synch to more tham one library.  Razmee209 and gdgmacguy's comments above are correct.  But if Apple only allowed you to authorize one computer at a time, then having a broken computer would mean you could no longer use your Apple ID with iTunes.

  • Can i update ios 8.0 via cellular data network?

    Can i update ios 8.0 via cellular data network?

    No, it uses too much cellular data. Also if your phone is running fine on IOS 7.1.2 I'd hold off upgrading until a few more  of the bugs have been worked out of IOS 8.

  • How to find when and what date my iphone was first switched on from a retailer

    how to find when and what date my iphone was first switched on from a retailer

    Depending on the Code version you are running you can look for this output . It will show when a SFP was removed and inserted.
    module-2# show port-config internal all  (This command wil differ of earlier versions of SAN OS )
    Mar 20 08:53:45 2011  00449361  fc2/20         ---   DOWN   Xcvr inserted          
    Mar 20 08:53:32 2011  00829429  fc2/20         ---   DOWN   Disable                
    Mar 20 08:53:32 2011  00826403  fc2/20         ---   DOWN   Disable                
    Mar 20 08:53:32 2011  00818936  fc2/20         ---   DOWN   Xcvr removed  

  • IOS 7.1.1 cellular data settings won't save on iPhone 4s???

    I'm using a 16GB iPhone 4s, with the latest version of iOS 7 as of writing this, version 7.1.1 Whenever go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for a lot of my apps except for a few key apps that I need it for (Mainly Mail, FB Messenger App, Google Maps, and What' s App that I leave on), the moment I back out and come back in, almost all the apps I turned cellular off for are back on again. I've tried turning background app-refresh off thinking it was overriding my cellular settings, nothing. I've tried restarting my phone a bunch of times, nothing. Nothing I do seems to fix this issue and it's frustrating because I have the minimum data plan and I can't turn cellular off completely because I don't have a texting plan and depend on iMessages, FB Messenger, and What's App to get messages from people, and a lot of times it can be urgent so I need to figure out how to fix this stupid bug. Anybody else have a similar issue and/or know how to fix this?
    BTW , i try to rest the network setting and still same problem. 

    Check out this thread, where a solution is proposed. (it's technical)

  • Could not activate cellular data network iPhone 6

    I bought a launch day iPhone 6 and I've been having trouble with my carrier, MetroPCS. I use MetroPCS on the GSM side of the network and for some reason at least three times a day I get the "could not activate cellular data network" message. I've tried everything from getting a new SIM to restoring my iPhone. I don't think it'd be my iPhone because I've used other SIMs in it without a problem whatsoever. Any suggestions to keep this from happening? my iPhone 5S never had any issues with the carrier, I've had MetroPCS's GSM side network since it was released.

    Hello espi_will,
    Thanks for the question. After reviewing your post, it sounds like you are having trouble with a cellular data connection. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPhone cellular data connection issues
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I cannot send or receive pictures via iMessage data roaming enable 3G and cellular data all switched on

    I Cannot send pictures or receive them via iMessage cella data ,data roaming and 3G all switched on

    Hello there, Blackpool1.
    The following Knowledge Base article offers some great, in-depth steps for troubleshooting issues with sending MMS type messages with your iPhone:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Start with these steps and then move down from there if the issue persists:
         If you can't send and receive MMS
    You will need these to send and receive MMS:
    An iPhone 3G or later
    iOS 3.1 or later
    A cellular data connection (MMS isn't available if you're using only Wi-Fi)
    A domestic MMS plan from your cellular provider. You might need an international messaging plan to send MMS to an international contact (Contact your carrier for more information.)
    A roaming MMS when using a cellular provider's network that is different from your billing cellular provider's network (Learn more about roaming and contact your carrier for more information.)
         To resolve issues with sending and receiving MMS, follow these steps
    Go to Settings and turn airplane mode off.
    Go to Settings > Messages and turn MMS Messaging on.
    Go to Settings > Cellular and turn Cellular Data on.
    Go to Settings > Cellular and turn Data Roaming on if you're roaming on a cellular provider network that is different from your billing provider's network.
    Make sure that you have a cellular data connection in the status bar of your iPhone.
    Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
    Make sure that you can send and receive SMS. If you can't send and receive SMS, see the "Issues with sending and receiving SMS" section, above. MMS might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
    Restart your iPhone.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    Remove your SIM card and insert it again.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • Adding BW Modelling plugins in HANA Studio

    Hello Experts, I installed SAP HANA Studio in my local machine (outside C:Program Files, i.e in  D Drive) I followed 2 options to install BW Modelling Tools Plugin, both have been unsuccessful. Can some one please let me know what is missing. I check

  • How can i extract just documents from time machine backup?

    How can I extract just my documents from a time machine backup?   I had to re-install Lion after the update screwed things up, the Genius Bar guy told me to re-install each App, and then transfer just my data (documents) back but didn't tell me how. 

  • What condition to trigger import PO?

    Hi I have some doubts about how to trigger import PO? Let's say if country code of vendor and receiving plant is different, so the system will consider it as import PO? then there will be import tab in THIS PO? But when I am testing in IDES, the vend

  • How I do to show my customized iView before the application be expired?

    I have a problem in my Web Dynpro Application when it expire, because after this moment, when the user try do anything inside the application, the portal show a stand error page saying that my application has expired. My application is in authenticat

  • Invalid input

    I have an application that's basically a form like you see on many sites, that asks for the First Name, Last name, occupation, email address and password etc.. I'd like to disable the user from continuing to the next page if he inputs any invalid inf