Ios 8.2 bluetooth

Hi there,
I have an iPhone 6 (64gb) which just updated to the latest OS update (8.2) as of this morning.  Following the installation of this update, my iPhone bluetooth connectivity has been negatively affected.  It will pair with my car's built-in bluetooth, and says it is connected, will make phone calls etc, but there is NO AUDIO.  I have zero audio with respect to the use of phone AND music functions.  I have tried rebooting the phone with no change.  I have also deleted the device from my car's bluetooth software and re-discovering/reconnecting it.  That also did not help.
As of right now, this update, which was supposed to fix a bug which was out there for some people which caused this very problem, has in fact created the problem in my phone.  I have a connection according to my phone and my car, but i have NO AUDIO through the bluetooth.
Anyone have any suggestions and in the alternative, how fast can this be fixed by Apple because it presents a big problem.
Thanks

Hello there Ka_Kennedy,
As I understand it, the phone is connecting without issue to the bluetooth in your vehicle, but you do not get any audio to go to the vehicle from the iPhone. You started where I would have too, so now I would quit the Music and Phone apps:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue continues, next I would use the troubleshooting from this article:
Use iTunes to restore your iOS device to factory settings
These steps specifically:
Tap Settings > Bluetooth and turn Bluetooth off and then on again.
If your device is still experiencing issues
If the steps above have not resolved the Bluetooth behavior you are experiencing, perform a software restore in iTunes.

Similar Messages

  • Since updating to iOS 5, my bluetooth and signal have been destroyed. Before the update, the phone worked perfectly, connecting to my bluetooth in car for both calls and music. Reception was also perfect. Now, my bluetooth doesnt work, and I cant be heard

    Since I updated my iphone 4 software from 4.3.3/4.3.5 - bought brand new only 2 weeks before the update came out - to iOS 5, my bluetooth no longer works in me ford fiesta and when I ring people, they literally can not hear a word I say. It has nothing to do with poor signal areas as they are the same areas I was in with the same phone before the software update! i have even sent for a replacement phone and received a reconditioned phone (after paying excess charge - JOKE!) and the same problem occured when I updated again. I cannot believe there is no downgrade as this iOS 5 is a shambles and to be honest, I see very little difference in terms of apps and photos so i have no idea why apple are recommending this upgrade!
    Is there anything I can do to improve the fact that nobody can hear me on the phone when I speak?!! Or are apple going to insist I keep a phone that is of no use to me if I can't actually use it as a PHONE!
    Please please help!

    Hi,
    Thanks! I forgot to add, I have debonded and rebonded the bluetooth in car and phone and have carried out 3 restores on the phone in my ITunes. All to no avail. I have also jsut spent £40 on a lead from Ford that has made no difference too! I went to them today to request a software upgrade on my car as I though perhaps the lack of connectivity in the car was down to the car being behind the iOS5 software but was informed there was no need for an upgrade and this problem is purely an apple problem! Is there any way around the downgrade? Or are apple gong to resolve this problem at all??

  • After ios 5 update, bluetooth on ipod touch not funcioning-keynote app no longer pairing with ipad

    Since the ios 5 update--bluetooth longer funcioning on ipod touch.  iPad no longer syncing with keynote remote app on ipod touch.  My iPad no longer sees the iPod touch.  The Bluetooth indicator does not come on or flash on the ipod touch.
    any help or suggestions?

    alex.g wrote:
    I've got a fix, even for  those who don't have hotspot (like me) who want to get the ipad and iphone talking over bluetooth again.
    First, I should say that I said when I got my 4s, the problem was solved. It was not. I was just connecting via wifi, but I wanted bluetooth back.
    Here is how I got it back without hotspot.
    1. Launch keynote on one device and the remote on the other as you normall would.
    2. Find another app that bluetooth links ipad and iphone (I used 'pictransfer light'). Install on both devices and launch on both devices. Follow the promt to get a bluetooth sync.
    3. Double push the home button both devices to pull up the multi-tasking and open keynote and keynote remote on the relevant devices.
    4. In keynote, go to settings; advances; remote. You should now be able to get the remote to link (you may, on the device running the remote, need to hit settings and then 'new keynote link'.
    Once I launched pictransfer, the bluetooth logo was blue on both devices the whole time I ran through the other steps. I suspect that that was also the point of using the hotspot service.
    Also noteworthy: I am yet to try this 'in the field'. For all I know, this won't keep a connection for as long as one might need. I'll find out on Thursday when I rely on the remote for 90min. On the positive side, I was able to keep the connection even when I double clicked home and closed pictransfer while leaving keynote and keynote remote open...
    This work-around worked -- I found that as long as I launched the "Pictransfer for iPad Lite" app just before the presentation that it seemed to work fine.  However, if Bluetooth gets turned off or you disconnect I think you will have to repeat the work-around -- nice find.
    Apple really needs to fix this.  They even have a posted document describing how to link two devices by Bluetooth and the truth is that it just does not work as they say.  They need to add whatever code into the Keynote & Keynote Remote apps to initiate bluetooth to connect the devices.  It's fine if it prefers WiFi, but it should give you the bluetooth option as well.

  • IOS 8.3 bluetooth bug...ugh!!!

    So, Apple has done it again with iOS 8.3. I am an aircraft pilot. EVERYTHING I do is on my iPad. I just recently updated to iOS 8.3. Well, I went to take a flight yesterday, and my bluetooth GPS antenna would not connect. (yes, I have paper charts...but it's no fun trying to fly that way.) After 3 reboots, several forget device/connect to device...I got nowhere. Well, I didn't fly that day. However I managed to waste a lot of time going out to the airport, preflighting the airplane, and driving back home that day. I know this sounds like "new world problems". But aren't apple products supposed to "just work"?
    Well, I got back home last night and found warnings posted all over every aviation webpage/blog/forum about this bug. It has been confirmed by several companies techies and they have ALL stated that this is an Apple error. Apple has also confirmed this.
    sources...
    https://seattleavionics.wordpress.com/2015/04/14/ios-8-3-problem-with-bluetooth- gps-and-ads-b-receivers/
    http://bad-elf.com/blogs/bad-elf/18013536-alert-compatibility-issue-with-apple-i os-8-3-and-external-gps-receivers
    I am now looking for solutions.... Some have downgraded their iPads back to 8.2. I really don't want to have to do this. But many people have blogged that the iOS 8.4 Beta does not fix the issue either. Thanks Apple....
    I have all Apple products, and have been an ALL Apple consumer for the past 10 years. But this is unacceptable. Oh , by the way, all the pilots with Android devices are still flying without issue. I never thought I would EVER say this...  But if this issue is not fixed VERY soon, I will be shopping for a new android device. I do NOT relish this thought, but every day with the iOS 8.3 bluetooth bug, is a day that I CAN'T FLY WITH GPS!!!!
    I am sure other venues besides aviation are affected by this....       Any other solutions or rumors from the community are greatly appreciated.
    Frustrated pilot.

    Philly_Phan wrote:
    firemediclex wrote:
    ...this is an Apple error. Apple has also confirmed this.
    Where was that confirmation?
    By the way, my BT is working just fine with 8.3
    Last sentence of the second paragraph of this link...
    https://seattleavionics.wordpress.com/2015/04/14/ios-8-3-problem-with-bluetooth- gps-and-ads-b-receivers/
    "Apple has noted that they’re aware of the problem and have put a high priority on fixing it but have not announced a specific timeframe."

  • IOS 8 & Bose Bluetooth

    I have an iPhone 5s & Bose Bluetooth headset. Before upgrading to iOS 8 & 8.0.2, I could answer a call on my headset by turning it on and the call would be routed to the headset. Now, in iOS 8.0.2, when I turn my headset on to answer, the call is answered, but routed to my phone. I actually have to go to the phone and choose the Bose headset. Once the headset is chosen, everything acts as expected. If I were to leave the headset on and take the call via the device, it also acts as expected.
    This is obviously a bug. Any ideas if this is being addressed in the updates?

    Same problem for me (using headset Jabra BT2050 with iPhone6 iOS 8) ... still present with iOS 8.1.3
    It's not a bluetooth pairing issue and the only workaround I found is this below
    - Setting/General/Accessibility/Call Audio Routing (set Headset, instead of Automatic)
    but in this way it uses headset (if connected) even if you answer sliding the iPhone
    That's quite incredible from Apple, while using the state of the art for device and iOS (the best iOS and iPhone ever)
    I've reported the same issue here
    iOS 8 and bluetooth headset call answer issue

  • IOS 7 GM Bluetooth say connected but does not play.

    I've been using iOS 7 and bluetooth stereo on my iPhone says connected to my Pioneer stereo, but nothing plays, The stereo also says not connected. Has anyone had this bug? I hope apple fixes this before official release because my Nexus 4 connects perfectly. It's an iOS issue.

    Had the same problem connecteing with USB to my stereo.
    it was suggested I do this by user lllaass
    <Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.>
    And it worked for me.

  • Iphone 6 on iOS 8.1 bluetooth audio no playlists

    I just update my iphone 6 to 8.1   (8.02 to 8.1)
    What is fixed: bluetooth connection to my VW carkit for phone. I can make calls again, see contacts ect.
    What is not fixed:
    Bluetooth audio with my Volkswagen Golf 2014, audio works but no selection available: no tracks, albums or artist etc showing. Does not sync any content view with car(kit). This used to work fine on my iphone 5 on iOS 7.(any 7.xx versions)
    What to do?

    Update:  It actually hooks fine.  However, I cannot call out, but people can call in.

  • IOS 8 and Bluetooth Phone and Audio Streaming Failing

    I have a 2013 Nissan Pathfinder and a 2015 Nissan Leaf, both with bluetooth phone integration and audio streaming support.  Both cars worked fine when I had two iPhone 5s paired to both cars and running latest iOS 7.  Both phones worked in both cars and could fully integrate to make calls and also to stream audio from device to car.
    When I upgraded one iPhone 5s to iOS 8 and replaced the other with an iPhone 6Plus running iOS 8, both are having problems with both cars.
    1.  Both gave a "failed connection" message but the phones do actually pair.
    2.  Both cars show a phone handset with a line through it on the in-car display which means no connection.
    3.  The "5 bars" cell signal indicator on the in-car display no longer shows up.
    3.  Outgoing calls made from phone and put through car system work fine except for some garbled audio.
    4.  Incoming calls make the wrong screen appear on the nissan display and can not be answered by the display on the car.  Pushing the answer button on the in-car display doesn't do anything.
    Lots of other tiny issues.  Apple needs a fix here.  I called Nissan and they said it's 100% Apple's fault.
    Anyone else having issues with Nissan Bluetooth integration or any other manufacturer?

    We have a 2008 Nissan Sentra - The bluetooth pairs ok.  When a call comes in on my 5S or my wife's 4S the bluetooth does not do anything.  The bluetooth does not ring and it does not connect to the call.  The call has to be answered on the phone.  Like I said, the phones are paired.  You can access Siri through the bluetooth to initiate a call.  Once the call is connecting, the bluetooth drops off and there is no sound.  Just like when you receive a call.  Apple needs to fix this.  This is completely ridiculous.  I WAS going to buy an iPhone 6.  I will not if this is not fixed.

  • IOS 5.1 bluetooth problem with LG HBS-700

    After upgrading to iOS 5.1, my LG HBS-700 bluetooth headset still plays music from my iPhone, but the music controls no longer work (play/pause, next/last track).  The phone functionality (start/answer call) still works.  Is anyone else having these sorts of problems?  I 'forgot' the device and re-connected it, but that did not correct the problem.  I suspect its in one of the sub-functions of bluetooth signalling, but I'm not familiar enough with the standard to correctly designate it (I suspect someone in Apple knows it off the top of their head ._. )
    Thank you.

    Oddly enough I didn't have any problems with the HBS-700 on my iPhone 4 running IOS 6. However I got an iPhone 5 recently and noticed today the exact same thing you describe. Call and volume controls work fine, but I have no control at all of any music playing. This totally *****, but I have no idea if its a problem that Apple needs to correct or a problem with the LG which would mean it can't be fixed. Totally frustrated.

  • Ios 7 + vehicle bluetooth

    I'm having trouble connecting to the bluetooth in my car now that my iphone 5 has iOS 7. When my phone does connect and I'm using the music app, I can no longer use the controls in my car/on my steering wheel to change the songs. I also used to be able to double click the home button on my phone and the music controls would come up on the lock screen and they were useable. Now, I swipe up and they come up in my command centre but they don't respond. SUPER FRUSTRATING - especially when driving!!

    should be fine on all devices but Apple.  Just pair your phone with the car.

  • Anyone else still having iOS 8.1 Bluetooth Connection issues.

         Hi there just wanted to see if anyone is still having the Vehicle "Hands Free" Connection issues via Bluetooth on the iPhone 6? I drive a 2009 Acura TL and I am still having the connection issue. Oddly enough before the 8.1 update I was running 8.0.2 and it worked fine. Now when I get in my car and the phone connects it cripples the entire system. It won't allow me to change to the USB mode for my connected iPod and when I try to place a call via the "Hands Free" system it beeps as if it is activating and then does nothing.
         I have tried everything that I can think of with no results. I was hoping there was someone out there with the same car or similar having the same problem that might have found a fix. Chime in and let me know.

    I am having similar problems with Bluetooth connectivity but not with a car.  I use a Planatronics Legend.  Everytime that a call comes in, my Legend announces the call then immediately disconnects from my iPhone.  All of this started after upgrading to ios 8.1.
    Apple should not advertise fixes to problems without truly confirming the repairs.

  • IOS 4.3 Bluetooth Headset Problem

    Does anyone have this similar problem?
    My bluetooth headset (handsfree) disconnects intermittently every few minutes (and auto reconnects in 10 to 20 secs). The "Personal Hotspot" option was disabled as I thought it was interferring with the bluetooh connection.
    But after some trial and error, I disabled the Wi-Fi option, and it solved the bluetooth disconnection problem.
    Prior to IOS 4.2, I have never encountered this problem. Does anyone know how I can downgrade back to IOS4.2?

    After upgrading to iOS 4.3, within a few days later my Jabra WAVE encountered problems with its Bluetooth connectivity. I had no problems pairing with both my iPhone4 and my MacBook (aluminium uni-body model). Unfortunately, I can't control my Jabra WAVE's volume control any more which was clearly shown on my iPhone4. Worse of all, I can hear the caller's voice but not vice versa.
    I thought my Jabra WAVE was faulty, and I tested it on Skype via my MacBook. To my surprise it worked flawlessly. I've a hunch that iOS 4.3 is still very buggy, and Apple iOS engineers haven't rectified lots of these bugs since the last version.
    This is a terrible pain for everyone who's upgraded to iOS 4.3. Bummer

  • Does iOS 7 support bluetooth printing?

    I know printer directly to Bluetooth devices like the Brother Pocketjet portable printers was not available in iOS 6.  I'm curious with the improvements to iOS 7, is it now an option?

    Which is why I said "should" rather than "will". As there are no absolutes, I'm pretty sure there will be an app somewhere that will not run or have issues until its updated to the new iOS.
    With that said for the most part there "should" be no issues updating to a new iOS version related to having older unupdated apps, but its still possible that there can be.

  • New iOS 7 and Bluetooth Headsets

    Hi,
    I intaslled the new iOS 7 on my iPhone 4S last night and today none of the button functions on my bluetooth headset (pause, next track, last track, random play, etc.) are working.  They worked under iOS 6 no problem - Any ideas why they aren't working now?  How do I get them back?
    The headset pairs okay and I hear the music through the earpieces though I now only seem to be able to control the music directly from the music app screen - which is not convenient to use whilst I am riding my motorcycle.
    Many Thanks.
    S

    Hi there,
    Have you tried deleting your headset from the list of devices? Go to Settings>Bluetooth>(your headset name)> the information "i">forget this device. Then re-pair. This worked for my Jaybird BluebudX headset. Annoyingly the battery health meter for the headset's battery does not show with IOS 7.
    Good luck!
    Mark

  • IPhone 4 / iOS 6 drops  bluetooth connection when I answer a call using handsfree link in car.

    Honda Crosstour 2010. Handsfreelink and phone pair ok but when I go to answer a call via the talk button on the steering wheel, the connection drops and I have to use my phone to talk, rendering auto bluetooth useless. I have to manually reconnect the two to get car and phone bluetooth working again. Honda and Verizon both point to Apple as the problem...

    Follow basic troubleshooting found in your user Guide for your phone.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    #1: Reset: http://support.apple.com/kb/HT1430
    #2: Restore: http://support.apple.com/kb/HT1414

Maybe you are looking for

  • Previously purchased tab on iPad shows purchases from multiple accounts?

    We share a home account across 2 iPads. On 1 iPad if you look at previously purchased apps, it shows apps from another old iTunes account I had, but no longer use for current purchases. If an iPad is signed in with one account, why is it showing prev

  • Typographical (Smart) Quotes Algorithm

    Hi all, I have some questions about straight vs. typographical quotes: 1. As far as I concern there can be 2 different techniques to change straight to typographical quotes: a) a RegExpr that searches for pairs of quotes, b) changing a quote by analy

  • Report needed for infotype changes

    hi all i need a standard report that provides employee numbers for which master data changed  in a particular infotype. plz suggest regards niki

  • CC error

    Hello experts, Today i have built a file to file interface using FCC and tested the configuration it was fine. But i found an error in sender communication channel as shown below, when monitoring in RWB. Conversion initialization failed: java.lang.Ex

  • [Help]PT 8.51 pscfg.exe config Issue

    Hello, Recently, I just install a PT 8.51 system on the same box (a Virtual Machine). (Platform: Win2008R2x64, MSSQL2008R2, PT8.51 Media Pack, HRMS 9.0) Everything works fine, but just the pscfg.exe configure issue for Application Designer to launch.