IOS 8.2 on iPad2 -- fresh install advice?
So I'm considering wiping my iPad2 clean, restoring factory settings, installing iOS 8.2 then putting back on the things/ apps that I currently use. And I wondered if anyone had any advice or experience to share in that matter.
It's been updated with each iOS since whatever it shipped with back in 2010, with lots of documents (pdfs in iBooks) and apps installed and at times removed. It runs well enough on iOS7, but I had been thinking of wiping it clean and reinstalling since before the iOS8 update. It's a bit laggy, slow but not unusable and not that annoying. It's just easier to put back what I want than to take off what I don't use if you get my drift. So I was thinking a fresh install may straighten it out somewhat.
I know that iOS8 is probably pushing the boundary of what it can handle, but I still like the idea of the clean install and that's the iOS that's available now. Besides, who can resist the appeal of a new OS?
Specifically, I'm looking at this process Re: My ipad 2 ran great on with IOS 7. Now with IOS 8 it is slow and choppy and full of error messages. Is this Apples way of forcing my IPad2 into obsolesence?
Thoughts? Warnings? Encouragements?
thanks
marie
The IPad 2 was a great investment since it was able to handle IOS 4.3 to IOS 7.1.2 That's over 3 years of upgrades! Unfortunately IOS 8 shows the IPad's weaknesses and you will probably experience lagging, crashes, etc that you never encountered before.
If I could rewind the clock my iPad 2 would still be running IOS 7.1.2 but unfortunately Apple doesn't allow that. Talk about a way to motivate sales! Allow you to upgrade and then slow your device down and introduce issues you never had before.
Fortunately my wife's Ipad 2 is still running IOS 7.1.2 and so is my iPhone 4s. They still have a few years of use to them. But now I am looking at an iPad Air....
So Apples plan worked like it was supposed to.
Similar Messages
-
Installing iOS 6 on my ipad2 that is still running on iOS 4.
Hello,
I need to install iOS 6 on my ipad2 that is still running on iOS 4.
Is it possible? And can anyone offer any advice or caution?
I was worried about skipping iOS 5 and wonder if it matters.
So far I have not had any luck.
ThanksYou should always backup the iPad before you update or restore the iPad. This is what Apple says about error 3194.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Before you take drastic measures, quit iTunes, restart the iPad, restart your computer and try again. Use another cable if you have one and try switching USB ports on your PC. -
I am trying to install iOS 6 on my IPAD2 but none of the screens that are displayed are what is on my IPAD.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
After installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?
Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.
-
HI. i'm on the beta version of iOS 7.1 (beta 3) and i wanted to get OTA update on my iPad2. after install, i unlocked my device and saw : it may take a few minutes to activate your iPad. after about 5 minutes, it was show an error : we couldn't activate your iPad at this time . please Help me !
Are you a developer? If so, post this question in the developer forum. If not, why are you using a beta version of ios 7? You need to restore your device as NEW in itunes and update the current software version.
-
Are you doing a fresh install of IOS 7.1
I find that doing a fresh install of a major software release wards off problems.
what do you think?http://support.apple.com/kb/HT1414
Regards. -
I wish to sell my 2008 MacBook Pro. Have erased hard disk and when I went to fresh instal Mavericks OSX 10.6 (it gives me no other choice in the disk utility program) It says in the Apple Store, it is unavailable. But because this is done from disk utility there is no operating system or access to choose another OS eg Yosemite. I cannot download anything using my iMac as that came ready loaded with Yosemite, so it does not show as a purchase. I do not want to use the Time Machine backup as that has all my details, apps etc. in it. Would the best way be to purchase a disk containing Mavericks the OS that was on it most recently. Can anyone offer advice please?
You need to re-install the OS the computer shipped with using the disks that were supplied with the computer. Contact Apple Support and have the serial number of your computer available. They will send you new disks for a small fee.
Selling old Mac
Selling old Mac (2)
Selling old Mac (3)
Selling old Mac (4) Apple support -
reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano -
Why is Mavericks running so slowly after a fresh install on my Macbook Pro?
I have a 13-inch, Early 2011 Macbook Pro.
Towards the end of 2013 Mountain Lion had been running very sluggishly, and I was getting the spinning beachball of death all the time, so I decided to do a fresh install of Mavericks. I wiped my whole HD using disk utility and installed Mavericks from a flash drive.
I then installed Microsoft Office 2011 from the original DVD and set up Mac Mail to work with my Gmail account etc. All very standard. I also installed X-Code and various other things related to my work, but nothing crazy. My HD is only half-full (I have 141 GB of free space).
Despite this, everything is running really sluggishly (especially when MS Office programs are open) and I have to watch the beachball of death spin for about 10 seconds every minute.
Any help is greatly appreciated!
Here is the Etrecheck output:
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 2 days 3:4:35
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 319.21 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898 disk2 : (8.09 GB)
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.robohippo.HippoConnectDaemon.plist 3rd-Party support link
[System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
[System] cx.pow.firewall.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.robohippo.HippoConnectAgent.plist 3rd-Party support link
[System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
[not loaded] cx.pow.powd.plist 3rd-Party support link
User Login Items:
iTunesHelper
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Trusteer Endpoint Protection 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Epson Printer Utility 4: Version: 9.17 - SDK 10.5 3rd-Party support link
/Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Smultron: Version: 3.8.4 - SDK 10.0 3rd-Party support link
Time Machine:
Auto backup: YES
Volumes being backed up:
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 412.18 GB
Total number of backups: 4
Oldest backup: 2014-01-07 12:40:04 +0000
Last backup: 2014-01-20 17:50:35 +0000
Size of backup disk: Excellent
Backup size 412.18 GB > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
17% Mail
8% mtmd
5% mds_stores
3% mds
2% iTunes
Top Processes by Memory:
217 MB Mail
184 MB com.apple.WebKit.WebContent
139 MB softwareupdated
115 MB mds_stores
106 MB Google Chrome
Virtual Memory Information:
186 MB Free RAM
1.21 GB Active RAM
983 MB Inactive RAM
1.07 GB Wired RAM
7.85 GB Page-ins
326 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | awk '/V.*[(]/{if ($3 !~ /0(5a|a5)c/) print}' | wc -l`; Ps "3rd-party USB devices"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Mtn Lion fresh Installed. Now how do I make iTunes recognize my iPhone?
I decided to wipe my HD clean and do a fresh install of Mountain Lion on my iMac i5 27". My question relates to iTunes and syncing with my iPhone. My iPhone is no longer recognized by my computer. I would hate to have to wipe my iPhone and start syncing again with a "new computer" (it's still the same machine but with a fresh system). I still have a back up of my old system and was wondering if there is a way around this. Is there a way to manually force iTunes to recognize my iPhone? Is there a file somewhere in my old backup of the entire system that could be transfered to Mountain Lion so it would recognize my iPhone? I hope someone out there has a solution for this. Thank you!
I did a clean install for troubleshooting and I wanted it to keep it clean, so Setup Assistant and Migration Assistant were out of the question. I wanted to transfer my iTunes library and purchases and to be able to sync my iPhone as before. Called Apple and the rep said the only paths were the Assistants or wipe the phone and resync with the new library losing all app data in the process. Sensing the rep may have been a bit obtuse, I emailed Apple and got a call back from another friendly rep who promptly emailed this to me:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
I can attest this method works, and the key part may be this one:
If you backed your iOS device up to iTunes, back up your devices on the new computer or manually transfer the backups from your old computer. The backups belong in:
Mac: ~/Library/Application Support/MobileSync/Backup/ -
I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
also with the WLAN connection. My ISP has checked their side and everything is fine.
To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
o/s to W7-Ult.
Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
Thanks in advance to all and for any advice.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
Steam or the like causing interference.
I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
my Asus machine.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script> -
How do I Bring iTunes Up-to-Date on Fresh Install of Leopard?
I have created a new, vanilla image of Leopard on a partition of an external HD to be run on my 6 year old iBook. I did this fresh install so I could essentially start over and only use what I really need on this aging, but still functional Mac. I am still running the old Leopard installation on this same machine. Once I get this Leopard, pure version, to where I want it, I will restore it to my iBook using SuperDuper.
Everything is pretty much where I want it except that when I try to sync my iPhone through iTunes, no backup occurs. This is understandable since the iTunes on this Leopard - Pure image has a fresh copy of iTunes on it. I thought it might backup whatever was there, but that is apparently not the case. I have turned all the other syncing functions off so what is on the iPhone now won't be erased due to the fact that that content doesn't exist in this version of iTunes. The only other thing of any significance in iTunes are my podcasts, which I can easily replicate. My music is on an external drive.
My question is, how do I go about getting iTunes to back-up my iPhone? Do I have to bring over the old version of iTunes somehow? That looks awfully complicated. I have looked and I can't do it using Migration Assistant just for iTunes. Without the backup I might very well loose my apps on the iPhone as well. What are my options at this point?
I know people have done upgrades starting essentially from scratch, so there must be a relatively simple way to do this. Am I missing something? I suppose that when the next update to iOS comes out, iTunes will recognize that what is one my iPhone is not current and the new version will download and everything can go forward at that point, but I'd like to get this working so I can use this image before then. I welcome your suggestions and comments.
-BillThe problem has been resolved. It didn't have anything to do with the 10.5.8 Combo Updater, which I did use when doing the Upgrade from Leopard to Snow Leopard. It may have had more to do with upgrading iPhoto from version 6 to version 9, though I tend to doubt that. In any event when I did select some albums to sync with my iPhone, the iPhone back-up step did precede the sync, so everything is working as desired. Perhaps I just needed to make another run at it.
-Bill -
Fresh Install: Gnome Shell segfault and bgrt invalid status (Nvidia)
Hi everyone! I have Arch freshly installed, and after some modprobing last night I was finally able to get the Arch repository Nvidia drivers working. That being said, I am still getting a "bgrt invalid status" message on boot up (and, for what it is worth I do not have an Arch splash screen). I have googled the issue which took me to a thread here on the Arch forums, but that was dealing with the Noveau driver and not Nvidia.
Below is my entire dmesg output, and would appreciate if someone might help me look through it and diagnose the Gnome segfault and any other issues that may be present. I am also looking for some advice as to the proprietary Nvidia drivers. I have a GTX 980, and while currently I don't need any advanced rendering, here when an upcoming game gets released on Steam, I very well may need that.
dmesg output [main concern near bottom at entry 2.875973]:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d00bbf3b-182d-4b7f-9502-23eff99f42e5 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d08dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d08e000-0x000000009d094fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009d095000-0x000000009d4f4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d4f5000-0x000000009d964fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d965000-0x00000000bd92bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd92c000-0x00000000bdc97fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdc98000-0x00000000bdcb5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdcb6000-0x00000000be1defff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be1df000-0x00000000bef51fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bef52000-0x00000000beffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xbdc9e000 ACPI=0xbdc9e000 SMBIOS=0xf04d0 MPS=0xfd5d0
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000008000-0x0000000000048000) (0MB)
[ 0.000000] efi: mem02: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000000048000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000005f000) (0MB)
[ 0.000000] efi: mem05: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000000005f000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem06: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f3e000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f3e000-0x000000003795c000) (874MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003795c000-0x0000000037ca6000) (3MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037ca6000-0x0000000070a60000) (909MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000070a60000-0x0000000099a88000) (656MB)
[ 0.000000] efi: mem13: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099a88000-0x000000009c090000) (38MB)
[ 0.000000] efi: mem14: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c090000-0x000000009c094000) (0MB)
[ 0.000000] efi: mem15: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000009c094000-0x000000009c0b1000) (0MB)
[ 0.000000] efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0b1000-0x000000009c0b2000) (0MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0b2000-0x000000009c0b3000) (0MB)
[ 0.000000] efi: mem18: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0b3000-0x000000009c0b7000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0b7000-0x000000009c0b9000) (0MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0b9000-0x000000009c0ba000) (0MB)
[ 0.000000] efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0ba000-0x000000009c0bb000) (0MB)
[ 0.000000] efi: mem22: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0bb000-0x000000009c0bd000) (0MB)
[ 0.000000] efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0bd000-0x000000009c0be000) (0MB)
[ 0.000000] efi: mem24: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0be000-0x000000009c0c2000) (0MB)
[ 0.000000] efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0c2000-0x000000009c0c4000) (0MB)
[ 0.000000] efi: mem26: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0c4000-0x000000009c0c5000) (0MB)
[ 0.000000] efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0c5000-0x000000009c0c6000) (0MB)
[ 0.000000] efi: mem28: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0c6000-0x000000009c0e2000) (0MB)
[ 0.000000] efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0e2000-0x000000009c0e3000) (0MB)
[ 0.000000] efi: mem30: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0e3000-0x000000009c0e4000) (0MB)
[ 0.000000] efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0e4000-0x000000009c0e5000) (0MB)
[ 0.000000] efi: mem32: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0e5000-0x000000009c0e7000) (0MB)
[ 0.000000] efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0e7000-0x000000009c0e8000) (0MB)
[ 0.000000] efi: mem34: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0e8000-0x000000009c0f0000) (0MB)
[ 0.000000] efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0f0000-0x000000009c0f4000) (0MB)
[ 0.000000] efi: mem36: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0f4000-0x000000009c114000) (0MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c114000-0x000000009c115000) (0MB)
[ 0.000000] efi: mem38: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c115000-0x000000009c116000) (0MB)
[ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c116000-0x000000009c117000) (0MB)
[ 0.000000] efi: mem40: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c117000-0x000000009c118000) (0MB)
[ 0.000000] efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c118000-0x000000009c119000) (0MB)
[ 0.000000] efi: mem42: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c119000-0x000000009c126000) (0MB)
[ 0.000000] efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c126000-0x000000009c128000) (0MB)
[ 0.000000] efi: mem44: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c128000-0x000000009c129000) (0MB)
[ 0.000000] efi: mem45: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c129000-0x000000009c12b000) (0MB)
[ 0.000000] efi: mem46: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c12b000-0x000000009c12e000) (0MB)
[ 0.000000] efi: mem47: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c12e000-0x000000009c130000) (0MB)
[ 0.000000] efi: mem48: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c130000-0x000000009c132000) (0MB)
[ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c132000-0x000000009c135000) (0MB)
[ 0.000000] efi: mem50: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c135000-0x000000009c138000) (0MB)
[ 0.000000] efi: mem51: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c138000-0x000000009c13e000) (0MB)
[ 0.000000] efi: mem52: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c13e000-0x000000009c141000) (0MB)
[ 0.000000] efi: mem53: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c141000-0x000000009c142000) (0MB)
[ 0.000000] efi: mem54: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c142000-0x000000009c143000) (0MB)
[ 0.000000] efi: mem55: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c143000-0x000000009c146000) (0MB)
[ 0.000000] efi: mem56: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c146000-0x000000009c148000) (0MB)
[ 0.000000] efi: mem57: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c148000-0x000000009c149000) (0MB)
[ 0.000000] efi: mem58: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c149000-0x000000009c14a000) (0MB)
[ 0.000000] efi: mem59: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c14a000-0x000000009c14d000) (0MB)
[ 0.000000] efi: mem60: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c14d000-0x000000009cb1b000) (9MB)
[ 0.000000] efi: mem61: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb1b000-0x000000009cb1d000) (0MB)
[ 0.000000] efi: mem62: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb1d000-0x000000009cb1e000) (0MB)
[ 0.000000] efi: mem63: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb1e000-0x000000009cb1f000) (0MB)
[ 0.000000] efi: mem64: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb1f000-0x000000009cb23000) (0MB)
[ 0.000000] efi: mem65: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb23000-0x000000009cb27000) (0MB)
[ 0.000000] efi: mem66: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb27000-0x000000009cb28000) (0MB)
[ 0.000000] efi: mem67: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb28000-0x000000009cb2b000) (0MB)
[ 0.000000] efi: mem68: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb2b000-0x000000009cb4e000) (0MB)
[ 0.000000] efi: mem69: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb4e000-0x000000009cb52000) (0MB)
[ 0.000000] efi: mem70: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb52000-0x000000009cb53000) (0MB)
[ 0.000000] efi: mem71: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb53000-0x000000009cb59000) (0MB)
[ 0.000000] efi: mem72: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb59000-0x000000009d08e000) (5MB)
[ 0.000000] efi: mem73: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009d08e000-0x000000009d095000) (0MB)
[ 0.000000] efi: mem74: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d095000-0x000000009d1f6000) (1MB)
[ 0.000000] efi: mem75: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009d1f6000-0x000000009d4ba000) (2MB)
[ 0.000000] efi: mem76: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d4ba000-0x000000009d4bf000) (0MB)
[ 0.000000] efi: mem77: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009d4bf000-0x000000009d4c3000) (0MB)
[ 0.000000] efi: mem78: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d4c3000-0x000000009d4d8000) (0MB)
[ 0.000000] efi: mem79: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009d4d8000-0x000000009d4ea000) (0MB)
[ 0.000000] efi: mem80: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d4ea000-0x000000009d4f5000) (0MB)
[ 0.000000] efi: mem81: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009d4f5000-0x000000009d965000) (4MB)
[ 0.000000] efi: mem82: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d965000-0x000000009d978000) (0MB)
[ 0.000000] efi: mem83: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009d978000-0x000000009d97c000) (0MB)
[ 0.000000] efi: mem84: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009d97c000-0x000000009d97d000) (0MB)
[ 0.000000] efi: mem85: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009d97d000-0x000000009d982000) (0MB)
[ 0.000000] efi: mem86: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009d982000-0x000000009d983000) (0MB)
[ 0.000000] efi: mem87: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009d983000-0x000000009d987000) (0MB)
[ 0.000000] efi: mem88: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009d987000-0x00000000a4a2a000) (112MB)
[ 0.000000] efi: mem89: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a2a000-0x00000000a4a2d000) (0MB)
[ 0.000000] efi: mem90: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a2d000-0x00000000a4a2e000) (0MB)
[ 0.000000] efi: mem91: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a2e000-0x00000000a4a30000) (0MB)
[ 0.000000] efi: mem92: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a30000-0x00000000a4a31000) (0MB)
[ 0.000000] efi: mem93: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a31000-0x00000000a4a32000) (0MB)
[ 0.000000] efi: mem94: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a32000-0x00000000a4a38000) (0MB)
[ 0.000000] efi: mem95: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a38000-0x00000000a4a39000) (0MB)
[ 0.000000] efi: mem96: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a39000-0x00000000a4a45000) (0MB)
[ 0.000000] efi: mem97: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a45000-0x00000000a4a46000) (0MB)
[ 0.000000] efi: mem98: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a46000-0x00000000a4a6a000) (0MB)
[ 0.000000] efi: mem99: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a6a000-0x00000000a4a6b000) (0MB)
[ 0.000000] efi: mem100: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a6b000-0x00000000a4a77000) (0MB)
[ 0.000000] efi: mem101: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a77000-0x00000000a4a78000) (0MB)
[ 0.000000] efi: mem102: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a78000-0x00000000a4a9c000) (0MB)
[ 0.000000] efi: mem103: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a9c000-0x00000000a4a9d000) (0MB)
[ 0.000000] efi: mem104: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a9d000-0x00000000a4aa9000) (0MB)
[ 0.000000] efi: mem105: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4aa9000-0x00000000a4aaa000) (0MB)
[ 0.000000] efi: mem106: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4aaa000-0x00000000a4b29000) (0MB)
[ 0.000000] efi: mem107: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4b29000-0x00000000a4b2a000) (0MB)
[ 0.000000] efi: mem108: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4b2a000-0x00000000a4c4c000) (1MB)
[ 0.000000] efi: mem109: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4c4c000-0x00000000a5238000) (5MB)
[ 0.000000] efi: mem110: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5238000-0x00000000a5239000) (0MB)
[ 0.000000] efi: mem111: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5239000-0x00000000a523b000) (0MB)
[ 0.000000] efi: mem112: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a523b000-0x00000000a523c000) (0MB)
[ 0.000000] efi: mem113: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a523c000-0x00000000a523d000) (0MB)
[ 0.000000] efi: mem114: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a523d000-0x00000000a524a000) (0MB)
[ 0.000000] efi: mem115: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a524a000-0x00000000a524d000) (0MB)
[ 0.000000] efi: mem116: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a524d000-0x00000000a524e000) (0MB)
[ 0.000000] efi: mem117: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a524e000-0x00000000a5250000) (0MB)
[ 0.000000] efi: mem118: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5250000-0x00000000a5289000) (0MB)
[ 0.000000] efi: mem119: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5289000-0x00000000a528a000) (0MB)
[ 0.000000] efi: mem120: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a528a000-0x00000000a52ef000) (0MB)
[ 0.000000] efi: mem121: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a52ef000-0x00000000a52f0000) (0MB)
[ 0.000000] efi: mem122: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a52f0000-0x00000000a5334000) (0MB)
[ 0.000000] efi: mem123: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5334000-0x00000000a593e000) (6MB)
[ 0.000000] efi: mem124: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a593e000-0x00000000a594b000) (0MB)
[ 0.000000] efi: mem125: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a594b000-0x00000000a594c000) (0MB)
[ 0.000000] efi: mem126: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a594c000-0x00000000a594d000) (0MB)
[ 0.000000] efi: mem127: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a594d000-0x00000000a595d000) (0MB)
[ 0.000000] efi: mem128: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a595d000-0x00000000a5b5c000) (1MB)
[ 0.000000] efi: mem129: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5b5c000-0x00000000a5b78000) (0MB)
[ 0.000000] efi: mem130: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5b78000-0x00000000a5c47000) (0MB)
[ 0.000000] efi: mem131: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5c47000-0x00000000a5c49000) (0MB)
[ 0.000000] efi: mem132: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5c49000-0x00000000a5c68000) (0MB)
[ 0.000000] efi: mem133: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5c68000-0x00000000a5c71000) (0MB)
[ 0.000000] efi: mem134: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5c71000-0x00000000a5e1e000) (1MB)
[ 0.000000] efi: mem135: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5e1e000-0x00000000a6149000) (3MB)
[ 0.000000] efi: mem136: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6149000-0x00000000a6168000) (0MB)
[ 0.000000] efi: mem137: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6168000-0x00000000a6263000) (0MB)
[ 0.000000] efi: mem138: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6263000-0x00000000a626c000) (0MB)
[ 0.000000] efi: mem139: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a626c000-0x00000000a65d6000) (3MB)
[ 0.000000] efi: mem140: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a65d6000-0x00000000a65d8000) (0MB)
[ 0.000000] efi: mem141: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a65d8000-0x00000000a6b1e000) (5MB)
[ 0.000000] efi: mem142: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6b1e000-0x00000000a6b20000) (0MB)
[ 0.000000] efi: mem143: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6b20000-0x00000000a6b26000) (0MB)
[ 0.000000] efi: mem144: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6b26000-0x00000000a6b28000) (0MB)
[ 0.000000] efi: mem145: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6b28000-0x00000000a711a000) (5MB)
[ 0.000000] efi: mem146: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a711a000-0x00000000a711c000) (0MB)
[ 0.000000] efi: mem147: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a711c000-0x00000000a853f000) (20MB)
[ 0.000000] efi: mem148: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a853f000-0x00000000a8547000) (0MB)
[ 0.000000] efi: mem149: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8547000-0x00000000a854e000) (0MB)
[ 0.000000] efi: mem150: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a854e000-0x00000000a8556000) (0MB)
[ 0.000000] efi: mem151: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8556000-0x00000000a855c000) (0MB)
[ 0.000000] efi: mem152: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a855c000-0x00000000a8564000) (0MB)
[ 0.000000] efi: mem153: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8564000-0x00000000a8568000) (0MB)
[ 0.000000] efi: mem154: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8568000-0x00000000a8570000) (0MB)
[ 0.000000] efi: mem155: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8570000-0x00000000a8578000) (0MB)
[ 0.000000] efi: mem156: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8578000-0x00000000a8586000) (0MB)
[ 0.000000] efi: mem157: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8586000-0x00000000a8592000) (0MB)
[ 0.000000] efi: mem158: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8592000-0x00000000a8597000) (0MB)
[ 0.000000] efi: mem159: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8597000-0x00000000a859c000) (0MB)
[ 0.000000] efi: mem160: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a859c000-0x00000000a85a3000) (0MB)
[ 0.000000] efi: mem161: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85a3000-0x00000000a85aa000) (0MB)
[ 0.000000] efi: mem162: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85aa000-0x00000000a85b1000) (0MB)
[ 0.000000] efi: mem163: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85b1000-0x00000000a85b5000) (0MB)
[ 0.000000] efi: mem164: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85b5000-0x00000000a85bd000) (0MB)
[ 0.000000] efi: mem165: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85bd000-0x00000000a85bf000) (0MB)
[ 0.000000] efi: mem166: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85bf000-0x00000000a85c3000) (0MB)
[ 0.000000] efi: mem167: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85c3000-0x00000000a85ca000) (0MB)
[ 0.000000] efi: mem168: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85ca000-0x00000000a85d2000) (0MB)
[ 0.000000] efi: mem169: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85d2000-0x00000000a85d9000) (0MB)
[ 0.000000] efi: mem170: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85d9000-0x00000000a85e4000) (0MB)
[ 0.000000] efi: mem171: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85e4000-0x00000000a85e9000) (0MB)
[ 0.000000] efi: mem172: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85e9000-0x00000000a85ee000) (0MB)
[ 0.000000] efi: mem173: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85ee000-0x00000000a85f6000) (0MB)
[ 0.000000] efi: mem174: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85f6000-0x00000000a85fc000) (0MB)
[ 0.000000] efi: mem175: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85fc000-0x00000000a8604000) (0MB)
[ 0.000000] efi: mem176: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8604000-0x00000000a8608000) (0MB)
[ 0.000000] efi: mem177: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8608000-0x00000000a860a000) (0MB)
[ 0.000000] efi: mem178: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a860a000-0x00000000a860d000) (0MB)
[ 0.000000] efi: mem179: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a860d000-0x00000000a8612000) (0MB)
[ 0.000000] efi: mem180: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8612000-0x00000000a861c000) (0MB)
[ 0.000000] efi: mem181: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a861c000-0x00000000a86f7000) (0MB)
[ 0.000000] efi: mem182: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a86f7000-0x00000000a86fb000) (0MB)
[ 0.000000] efi: mem183: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a86fb000-0x00000000a873e000) (0MB)
[ 0.000000] efi: mem184: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a873e000-0x00000000a8740000) (0MB)
[ 0.000000] efi: mem185: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8740000-0x00000000a879c000) (0MB)
[ 0.000000] efi: mem186: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a879c000-0x00000000a879e000) (0MB)
[ 0.000000] efi: mem187: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a879e000-0x00000000a87a0000) (0MB)
[ 0.000000] efi: mem188: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a87a0000-0x00000000a87a2000) (0MB)
[ 0.000000] efi: mem189: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a87a2000-0x00000000a880e000) (0MB)
[ 0.000000] efi: mem190: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a880e000-0x00000000a881e000) (0MB)
[ 0.000000] efi: mem191: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a881e000-0x00000000a8823000) (0MB)
[ 0.000000] efi: mem192: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8823000-0x00000000a8835000) (0MB)
[ 0.000000] efi: mem193: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8835000-0x00000000a883e000) (0MB)
[ 0.000000] efi: mem194: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a883e000-0x00000000a8841000) (0MB)
[ 0.000000] efi: mem195: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8841000-0x00000000a8842000) (0MB)
[ 0.000000] efi: mem196: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8842000-0x00000000a887e000) (0MB)
[ 0.000000] efi: mem197: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a887e000-0x00000000a8883000) (0MB)
[ 0.000000] efi: mem198: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8883000-0x00000000a8884000) (0MB)
[ 0.000000] efi: mem199: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8884000-0x00000000a88d6000) (0MB)
[ 0.000000] efi: mem200: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a88d6000-0x00000000a8926000) (0MB)
[ 0.000000] efi: mem201: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8926000-0x00000000a892a000) (0MB)
[ 0.000000] efi: mem202: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a892a000-0x00000000a8948000) (0MB)
[ 0.000000] efi: mem203: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8948000-0x00000000a89ef000) (0MB)
[ 0.000000] efi: mem204: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a89ef000-0x00000000a8a1a000) (0MB)
[ 0.000000] efi: mem205: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8a1a000-0x00000000a8bca000) (1MB)
[ 0.000000] efi: mem206: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8bca000-0x00000000a8bdc000) (0MB)
[ 0.000000] efi: mem207: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8bdc000-0x00000000a8be0000) (0MB)
[ 0.000000] efi: mem208: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8be0000-0x00000000a8be7000) (0MB)
[ 0.000000] efi: mem209: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8be7000-0x00000000a8bea000) (0MB)
[ 0.000000] efi: mem210: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8bea000-0x00000000a8bfc000) (0MB)
[ 0.000000] efi: mem211: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8bfc000-0x00000000a8d7f000) (1MB)
[ 0.000000] efi: mem212: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8d7f000-0x00000000a8daa000) (0MB)
[ 0.000000] efi: mem213: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8daa000-0x00000000a8dc5000) (0MB)
[ 0.000000] efi: mem214: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8dc5000-0x00000000a8dd0000) (0MB)
[ 0.000000] efi: mem215: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8dd0000-0x00000000a8dfd000) (0MB)
[ 0.000000] efi: mem216: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8dfd000-0x00000000a8dfe000) (0MB)
[ 0.000000] efi: mem217: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8dfe000-0x00000000a8dff000) (0MB)
[ 0.000000] efi: mem218: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8dff000-0x00000000a8e08000) (0MB)
[ 0.000000] efi: mem219: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8e08000-0x00000000a90d8000) (2MB)
[ 0.000000] efi: mem220: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a90d8000-0x00000000a90d9000) (0MB)
[ 0.000000] efi: mem221: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a90d9000-0x00000000a94f9000) (4MB)
[ 0.000000] efi: mem222: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a94f9000-0x00000000a94fb000) (0MB)
[ 0.000000] efi: mem223: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a94fb000-0x00000000aa9e9000) (20MB)
[ 0.000000] efi: mem224: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aa9e9000-0x00000000aa9eb000) (0MB)
[ 0.000000] efi: mem225: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aa9eb000-0x00000000adb6d000) (49MB)
[ 0.000000] efi: mem226: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000adb6d000-0x00000000adb6f000) (0MB)
[ 0.000000] efi: mem227: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000adb6f000-0x00000000ae74b000) (11MB)
[ 0.000000] efi: mem228: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae74b000-0x00000000ae74d000) (0MB)
[ 0.000000] efi: mem229: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae74d000-0x00000000ae752000) (0MB)
[ 0.000000] efi: mem230: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae752000-0x00000000ae754000) (0MB)
[ 0.000000] efi: mem231: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae754000-0x00000000ae86e000) (1MB)
[ 0.000000] efi: mem232: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae86e000-0x00000000ae872000) (0MB)
[ 0.000000] efi: mem233: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae872000-0x00000000ae878000) (0MB)
[ 0.000000] efi: mem234: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae878000-0x00000000ae87a000) (0MB)
[ 0.000000] efi: mem235: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae87a000-0x00000000aeafa000) (2MB)
[ 0.000000] efi: mem236: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aeafa000-0x00000000aeafc000) (0MB)
[ 0.000000] efi: mem237: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aeafc000-0x00000000aeb16000) (0MB)
[ 0.000000] efi: mem238: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aeb16000-0x00000000aeb18000) (0MB)
[ 0.000000] efi: mem239: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aeb18000-0x00000000af538000) (10MB)
[ 0.000000] efi: mem240: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af538000-0x00000000af564000) (0MB)
[ 0.000000] efi: mem241: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af564000-0x00000000af5fe000) (0MB)
[ 0.000000] efi: mem242: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af5fe000-0x00000000af64e000) (0MB)
[ 0.000000] efi: mem243: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af64e000-0x00000000af7a2000) (1MB)
[ 0.000000] efi: mem244: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af7a2000-0x00000000af7aa000) (0MB)
[ 0.000000] efi: mem245: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af7aa000-0x00000000af86e000) (0MB)
[ 0.000000] efi: mem246: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af86e000-0x00000000af892000) (0MB)
[ 0.000000] efi: mem247: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af892000-0x00000000afa7e000) (1MB)
[ 0.000000] efi: mem248: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afa7e000-0x00000000afaa1000) (0MB)
[ 0.000000] efi: mem249: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afaa1000-0x00000000afae3000) (0MB)
[ 0.000000] efi: mem250: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afae3000-0x00000000afb00000) (0MB)
[ 0.000000] efi: mem251: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afb00000-0x00000000afea4000) (3MB)
[ 0.000000] efi: mem252: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afea4000-0x00000000afebc000) (0MB)
[ 0.000000] efi: mem253: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afebc000-0x00000000aff04000) (0MB)
[ 0.000000] efi: mem254: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aff04000-0x00000000aff0e000) (0MB)
[ 0.000000] efi: mem255: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aff0e000-0x00000000b00a3000) (1MB)
[ 0.000000] efi: mem256: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b00a3000-0x00000000b00a9000) (0MB)
[ 0.000000] efi: mem257: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b00a9000-0x00000000b0123000) (0MB)
[ 0.000000] efi: mem258: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0123000-0x00000000b012a000) (0MB)
[ 0.000000] efi: mem259: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b012a000-0x00000000b0176000) (0MB)
[ 0.000000] efi: mem260: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0176000-0x00000000b0199000) (0MB)
[ 0.000000] efi: mem261: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0199000-0x00000000b02b6000) (1MB)
[ 0.000000] efi: mem262: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b02b6000-0x00000000b02e3000) (0MB)
[ 0.000000] efi: mem263: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b02e3000-0x00000000b0426000) (1MB)
[ 0.000000] efi: mem264: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0426000-0x00000000b0443000) (0MB)
[ 0.000000] efi: mem265: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0443000-0x00000000b0645000) (2MB)
[ 0.000000] efi: mem266: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0645000-0x00000000b0662000) (0MB)
[ 0.000000] efi: mem267: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0662000-0x00000000b07a0000) (1MB)
[ 0.000000] efi: mem268: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b07a0000-0x00000000b07a6000) (0MB)
[ 0.000000] efi: mem269: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b07a6000-0x00000000b08d9000) (1MB)
[ 0.000000] efi: mem270: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b08d9000-0x00000000b08e4000) (0MB)
[ 0.000000] efi: mem271: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b08e4000-0x00000000b0a30000) (1MB)
[ 0.000000] efi: mem272: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0a30000-0x00000000b0a3e000) (0MB)
[ 0.000000] efi: mem273: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0a3e000-0x00000000b0a91000) (0MB)
[ 0.000000] efi: mem274: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0a91000-0x00000000b0a94000) (0MB)
[ 0.000000] efi: mem275: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0a94000-0x00000000b0bf3000) (1MB)
[ 0.000000] efi: mem276: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0bf3000-0x00000000b0bf7000) (0MB)
[ 0.000000] efi: mem277: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0bf7000-0x00000000b0c55000) (0MB)
[ 0.000000] efi: mem278: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0c55000-0x00000000b0c56000) (0MB)
[ 0.000000] efi: mem279: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0c56000-0x00000000b0d46000) (0MB)
[ 0.000000] efi: mem280: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0d46000-0x00000000b0d50000) (0MB)
[ 0.000000] efi: mem281: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0d50000-0x00000000b0da2000) (0MB)
[ 0.000000] efi: mem282: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0da2000-0x00000000b0daf000) (0MB)
[ 0.000000] efi: mem283: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0daf000-0x00000000b0dd7000) (0MB)
[ 0.000000] efi: mem284: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0dd7000-0x00000000b0ddf000) (0MB)
[ 0.000000] efi: mem285: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0ddf000-0x00000000b0de4000) (0MB)
[ 0.000000] efi: mem286: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0de4000-0x00000000b0de8000) (0MB)
[ 0.000000] efi: mem287: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0de8000-0x00000000b0ea0000) (0MB)
[ 0.000000] efi: mem288: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0ea0000-0x00000000b0ea5000) (0MB)
[ 0.000000] efi: mem289: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0ea5000-0x00000000b0f50000) (0MB)
[ 0.000000] efi: mem290: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0f50000-0x00000000b0f56000) (0MB)
[ 0.000000] efi: mem291: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0f56000-0x00000000b0f91000) (0MB)
[ 0.000000] efi: mem292: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0f91000-0x00000000b0f9e000) (0MB)
[ 0.000000] efi: mem293: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0f9e000-0x00000000b0fd1000) (0MB)
[ 0.000000] efi: mem294: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0fd1000-0x00000000b0fde000) (0MB)
[ 0.000000] efi: mem295: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0fde000-0x00000000b1080000) (0MB)
[ 0.000000] efi: mem296: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1080000-0x00000000b1087000) (0MB)
[ 0.000000] efi: mem297: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1087000-0x00000000b1146000) (0MB)
[ 0.000000] efi: mem298: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1146000-0x00000000b1154000) (0MB)
[ 0.000000] efi: mem299: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1154000-0x00000000b116f000) (0MB)
[ 0.000000] efi: mem300: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b116f000-0x00000000b1176000) (0MB)
[ 0.000000] efi: mem301: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1176000-0x00000000b11a5000) (0MB)
[ 0.000000] efi: mem302: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b11a5000-0x00000000b11ab000) (0MB)
[ 0.000000] efi: mem303: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b11ab000-0x00000000b1231000) (0MB)
[ 0.000000] efi: mem304: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1231000-0x00000000b1236000) (0MB)
[ 0.000000] efi: mem305: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1236000-0x00000000b1271000) (0MB)
[ 0.000000] efi: mem306: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1271000-0x00000000b127e000) (0MB)
[ 0.000000] efi: mem307: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b127e000-0x00000000b1304000) (0MB)
[ 0.000000] efi: mem308: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1304000-0x00000000b1308000) (0MB)
[ 0.000000] efi: mem309: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1308000-0x00000000b142c000) (1MB)
[ 0.000000] efi: mem310: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b142c000-0x00000000b142f000) (0MB)
[ 0.000000] efi: mem311: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b142f000-0x00000000b151c000) (0MB)
[ 0.000000] efi: mem312: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b151c000-0x00000000b1525000) (0MB)
[ 0.000000] efi: mem313: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1525000-0x00000000b153c000) (0MB)
[ 0.000000] efi: mem314: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b153c000-0x00000000b1544000) (0MB)
[ 0.000000] efi: mem315: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1544000-0x00000000b155b000) (0MB)
[ 0.000000] efi: mem316: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b155b000-0x00000000b1560000) (0MB)
[ 0.000000] efi: mem317: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1560000-0x00000000b198d000) (4MB)
[ 0.000000] efi: mem318: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b198d000-0x00000000b1999000) (0MB)
[ 0.000000] efi: mem319: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1999000-0x00000000b19a2000) (0MB)
[ 0.000000] efi: mem320: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b19a2000-0x00000000b19a5000) (0MB)
[ 0.000000] efi: mem321: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b19a5000-0x00000000b19a8000) (0MB)
[ 0.000000] efi: mem322: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b19a8000-0x00000000b19a9000) (0MB)
[ 0.000000] efi: mem323: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b19a9000-0x00000000b19fa000) (0MB)
[ 0.000000] efi: mem324: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b19fa000-0x00000000b19fb000) (0MB)
[ 0.000000] efi: mem325: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b19fb000-0x00000000b1a37000) (0MB)
[ 0.000000] efi: mem326: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1a37000-0x00000000b1a38000) (0MB)
[ 0.000000] efi: mem327: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1a38000-0x00000000b1aa1000) (0MB)
[ 0.000000] efi: mem328: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1aa1000-0x00000000b1aad000) (0MB)
[ 0.000000] efi: mem329: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1aad000-0x00000000b1acd000) (0MB)
[ 0.000000] efi: mem330: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1acd000-0x00000000b1ace000) (0MB)
[ 0.000000] efi: mem331: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1ace000-0x00000000b1af3000) (0MB)
[ 0.000000] efi: mem332: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1af3000-0x00000000b1af4000) (0MB)
[ 0.000000] efi: mem333: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1af4000-0x00000000bb91e000) (158MB)
[ 0.000000] efi: mem334: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb91e000-0x00000000bb920000) (0MB)
[ 0.000000] efi: mem335: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb920000-0x00000000bcf8f000) (22MB)
[ 0.000000] efi: mem336: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcf8f000-0x00000000bd052000) (0MB)
[ 0.000000] efi: mem337: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd052000-0x00000000bd061000) (0MB)
[ 0.000000] efi: mem338: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bd061000-0x00000000bd92c000) (8MB)
[ 0.000000] efi: mem339: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bd92c000-0x00000000bd9df000) (0MB)
[ 0.000000] efi: mem340: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bd9df000-0x00000000bdc98000) (2MB)
[ 0.000000] efi: mem341: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bdc98000-0x00000000bdc9e000) (0MB)
[ 0.000000] efi: mem342: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bdc9e000-0x00000000bdcb6000) (0MB)
[ 0.000000] efi: mem343: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bdcb6000-0x00000000bddbe000) (1MB)
[ 0.000000] efi: mem344: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bddbe000-0x00000000be1df000) (4MB)
[ 0.000000] efi: mem345: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be1df000-0x00000000be538000) (3MB)
[ 0.000000] efi: mem346: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be538000-0x00000000bee39000) (9MB)
[ 0.000000] efi: mem347: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bee39000-0x00000000bee3b000) (0MB)
[ 0.000000] efi: mem348: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bee3b000-0x00000000beeb1000) (0MB)
[ 0.000000] efi: mem349: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beeb1000-0x00000000beeb4000) (0MB)
[ 0.000000] efi: mem350: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beeb4000-0x00000000bef52000) (0MB)
[ 0.000000] efi: mem351: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bef52000-0x00000000bef74000) (0MB)
[ 0.000000] efi: mem352: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bef74000-0x00000000befff000) (0MB)
[ 0.000000] efi: mem353: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000befff000-0x00000000bf000000) (0MB)
[ 0.000000] efi: mem354: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000083f000000) (29680MB)
[ 0.000000] efi: mem355: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem356: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem357: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem358: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem359: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem360: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS All Series/Z97-PRO, BIOS 2012 09/30/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DBFFF write-protect
[ 0.000000] DC000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 0800000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0820000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 0830000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 0838000000 mask 7FFC000000 write-back
[ 0.000000] 5 base 083C000000 mask 7FFE000000 write-back
[ 0.000000] 6 base 083E000000 mask 7FFF000000 write-back
[ 0.000000] 7 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd8d0-0x000fd8df] mapped at [ffff8800000fd8d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x83ee00000-0x83effffff]
[ 0.000000] [mem 0x83ee00000-0x83effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x820000000-0x83edfffff]
[ 0.000000] [mem 0x820000000-0x83edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x800000000-0x81fffffff]
[ 0.000000] [mem 0x800000000-0x81fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9d08dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9cffffff] page 2M
[ 0.000000] [mem 0x9d000000-0x9d08dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9d095000-0x9d4f4fff]
[ 0.000000] [mem 0x9d095000-0x9d1fffff] page 4k
[ 0.000000] [mem 0x9d200000-0x9d3fffff] page 2M
[ 0.000000] [mem 0x9d400000-0x9d4f4fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9d965000-0xbd92bfff]
[ 0.000000] [mem 0x9d965000-0x9d9fffff] page 4k
[ 0.000000] [mem 0x9da00000-0xbd7fffff] page 2M
[ 0.000000] [mem 0xbd800000-0xbd92bfff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff]
[ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[ 0.000000] [mem 0x100000000-0x7ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BDC9E000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BDC9E080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BDCAD510 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BDC9E198 00F372 (v02 ALASKA A M I 00000011 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000BE1DEF80 000040
[ 0.000000] ACPI: APIC 0x00000000BDCAD620 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BDCAD6B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BDCAD700 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000BDCAE380 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000BDCAE8C0 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000BDCAF438 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BDCAF478 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BDCAF4B0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000BDCAF820 005977 (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: BGRT 0x00000000BDCB51F0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000083effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x83eff8000-0x83effbfff]
[ 0.000000] [ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081e600000-ffff88083e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x83effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x9d08dfff]
[ 0.000000] node 0: [mem 0x9d095000-0x9d4f4fff]
[ 0.000000] node 0: [mem 0x9d965000-0xbd92bfff]
[ 0.000000] node 0: [mem 0xbefff000-0xbeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x83effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x83effffff]
[ 0.000000] On node 0 totalpages: 8373331
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 59 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12051 pages used for memmap
[ 0.000000] DMA32 zone: 771254 pages, LIFO batch:31
[ 0.000000] Normal zone: 118720 pages used for memmap
[ 0.000000] Normal zone: 7598080 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d08e000-0x9d094fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d4f5000-0x9d964fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd92c000-0xbdc97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdc98000-0xbdcb5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdcb6000-0xbe1defff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe1df000-0xbef51fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbef52000-0xbeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88083ec00000 s86336 r8192 d32448 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8242437
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d00bbf3b-182d-4b7f-9502-23eff99f42e5 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32486996K/33493324K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 1006328K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4000.001 MHz processor
[ 0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 8003.33 BogoMIPS (lpj=13333336)
[ 0.000019] pid_max: default: 32768 minimum: 301
[ 0.000022] ACPI: Core revision 20141107
[ 0.009229] ACPI: All ACPI Tables successfully acquired
[ 0.029785] Security Framework initialized
[ 0.029788] Yama: becoming mindful.
[ 0.030858] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.034247] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035692] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.035711] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.035889] Initializing cgroup subsys memory
[ 0.035892] Initializing cgroup subsys devices
[ 0.035893] Initializing cgroup subsys freezer
[ 0.035894] Initializing cgroup subsys net_cls
[ 0.035895] Initializing cgroup subsys blkio
[ 0.035908] CPU: Physical Processor ID: 0
[ 0.035909] CPU: Processor Core ID: 0
[ 0.035911] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.036595] mce: CPU supports 9 MCE banks
[ 0.036604] CPU0: Thermal monitoring enabled (TM1)
[ 0.036611] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.036664] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.037117] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.043080] ftrace: allocating 21171 entries in 83 pages
[ 0.048407] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.081410] smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (fam: 06, model: 3c, stepping: 03)
[ 0.081414] TSC deadline timer enabled
[ 0.081426] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.081437] ... version: 3
[ 0.081437] ... bit width: 48
[ 0.081438] ... generic registers: 4
[ 0.081438] ... value mask: 0000ffffffffffff
[ 0.081439] ... max period: 0000ffffffffffff
[ 0.081439] ... fixed-purpose events: 3
[ 0.081440] ... event mask: 000000070000000f
[ 0.101445] x86: Booting SMP configuration:
[ 0.101446] .... node #0, CPUs: #1
[ 0.115404] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.122053] #2 #3 #4 #5 #6 #7
[ 0.238414] x86: Booted up 1 node, 8 CPUs
[ 0.238416] smpboot: Total of 8 processors activated (64025.68 BogoMIPS)
[ 0.243980] devtmpfs: initialized
[ 0.246376] PM: Registering ACPI NVS region [mem 0x9d08e000-0x9d094fff] (28672 bytes)
[ 0.246377] PM: Registering ACPI NVS region [mem 0xbdcb6000-0xbe1defff] (5410816 bytes)
[ 0.246503] pinctrl core: initialized pinctrl subsystem
[ 0.246530] RTC time: 13:27:06, date: 04/16/15
[ 0.246592] NET: Registered protocol family 16
[ 0.257198] cpuidle: using governor ladder
[ 0.270535] cpuidle: using governor menu
[ 0.270549] ACPI: bus type PCI registered
[ 0.270550] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.270588] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.270589] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.270757] PCI: Using configuration type 1 for base access
[ 0.284059] ACPI: Added _OSI(Module Device)
[ 0.284060] ACPI: Added _OSI(Processor Device)
[ 0.284060] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.284061] ACPI: AddHey, I ran into a similar error (not bgrt invalid status, but a gnome shell segfault) after updating recently and I'm using the proprietary drivers. I think I may have had multiple issues. I'm not sure if any of this advice will prove useful, but some combination of these worked for me:
* Stop gdm with systemctl (use ctrl alt f2 or another tty), uncomment WaylandEnable=false in /etc/gdm/custom.conf and try restarting gdm
* If that doesn't work, disable gdm and install another login manager (I used sddm)
* If that still doesn't work and you have the infinality font packages for freetype, fontconfig, and cairo, replace them with the default packages and try starting your login manager again
Last edited by canurabus (2015-04-17 18:36:59) -
Following an Apple Support Team member's advice, I retrieved as many files as I could and erased and repaired the HD before completing a fresh install from a bootable USB. Once I restored all of my software I set it backing up to Time Machine over night only to find that it had crashed and restarted over night before that had completed. I attach the crash report below:
Anonymous UUID: F1CB4D58-C5DE-D8BB-D543-3270C7724738
Wed Oct 30 21:51:58 2013
panic(cpu 2 caller 0xffffff80070dc19e): Kernel trap at 0xffffff80071c5e3d, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000001018, CR3: 0x0000000029716000, CR4: 0x0000000000000660
RAX: 0xffffff81d7fa3740, RBX: 0xffffff80368dc8c2, RCX: 0x0000000000001000, RDX: 0xffffff8027862650
RSP: 0xffffff81d7fa3720, RBP: 0xffffff81d7fa3770, RSI: 0x0000000000000005, RDI: 0xffffff8027862650
R8: 0xffffff81d7fa3490, R9: 0xffffff81d7fa348e, R10: 0x0000000000002000, R11: 0x000000000000065e
R12: 0xffffff80368dc8f0, R13: 0x0000000000000000, R14: 0xffffff80368dc8c2, R15: 0xffffff80368dc8e8
RFL: 0x0000000000010202, RIP: 0xffffff80071c5e3d, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000001018, Error code: 0x0000000000000002, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff81d7fa33b0 : 0xffffff8007022f69
0xffffff81d7fa3430 : 0xffffff80070dc19e
0xffffff81d7fa3600 : 0xffffff80070f3606
0xffffff81d7fa3620 : 0xffffff80071c5e3d
0xffffff81d7fa3770 : 0xffffff80071db854
0xffffff81d7fa37c0 : 0xffffff80071daf60
0xffffff81d7fa3800 : 0xffffff80071e1fa0
0xffffff81d7fa3830 : 0xffffff80071d9e8f
0xffffff81d7fa38f0 : 0xffffff80073611e4
0xffffff81d7fa3a00 : 0xffffff80073697cb
0xffffff81d7fa3bd0 : 0xffffff80071fc9db
0xffffff81d7fa3c30 : 0xffffff80071d544b
0xffffff81d7fa3cb0 : 0xffffff80071d4da4
0xffffff81d7fa3d70 : 0xffffff80071c2ebf
0xffffff81d7fa3f50 : 0xffffff800743de23
0xffffff81d7fa3fb0 : 0xffffff80070f3e06
BSD process name corresponding to current thread: backupd
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000006e0
Model: iMac11,3, BootROM IM112.0057.B01, 4 processors, Intel Core i5, 2.8 GHz, 16 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Hub
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Hub
USB Device: My Passport 070A
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:What else do you need?
Crashed again overnight during back-up:
Anonymous UUID: F1CB4D58-C5DE-D8BB-D543-3270C7724738
Fri Nov 1 00:25:41 2013
panic(cpu 2 caller 0xffffff80184dc19e): Kernel trap at 0xffffff80187cf663, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000008014, CR3: 0x000000002b62c000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000008000, RCX: 0xffffff81e9e8bcc8, RDX: 0x0000000000000001
RSP: 0xffffff81e9e8bc60, RBP: 0xffffff81e9e8bcb0, RSI: 0xffffff8042096108, RDI: 0x0000000000008000
R8: 0xffffff81e9e8bcd0, R9: 0xffffff81e9e8be70, R10: 0x000000000000064e, R11: 0x0000000000000297
R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000000, R15: 0xffffffffffffffff
RFL: 0x0000000000010202, RIP: 0xffffff80187cf663, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000008014, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff81e9e8b8f0 : 0xffffff8018422f69
0xffffff81e9e8b970 : 0xffffff80184dc19e
0xffffff81e9e8bb40 : 0xffffff80184f3606
0xffffff81e9e8bb60 : 0xffffff80187cf663
0xffffff81e9e8bcb0 : 0xffffff80187cf310
0xffffff81e9e8bd00 : 0xffffff80187cea6f
0xffffff81e9e8bde0 : 0xffffff80185ff47a
0xffffff81e9e8be50 : 0xffffff80187bf04c
0xffffff81e9e8bec0 : 0xffffff80187bc6de
0xffffff81e9e8bf10 : 0xffffff80187bee5a
0xffffff81e9e8bf50 : 0xffffff801883de23
0xffffff81e9e8bfb0 : 0xffffff80184f3e06
BSD process name corresponding to current thread: mdworker
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000018200000
Kernel text base: 0xffffff8018400000
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 285206678247
last loaded kext at 264611740123: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f9a865000, size 65536)
last unloaded kext at 114432919226: com.apple.driver.AppleUSBUHCI 650.4.0 (addr 0xffffff7f9909b000, size 65536)
loaded kexts:
com.apple.filesystems.msdosfs 1.9
com.apple.filesystems.smbfs 2.0.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.kext.AMDFramebuffer 1.1.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.AMDRadeonX3000 1.1.4
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.kext.AMD5000Controller 1.1.4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AirPort.Atheros40 700.74.5
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.IOBluetoothHIDDriver 4.2.0f6
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.kext.AMDSupport 1.1.4
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0 -
Fresh Install of Mtn Lion on new SSD More Difficult Than I Thought
Today I installed my brand new 512GB SSD from Crucial. Had wanted a fresh install of Mtn Lion, but that turned out to be difficult. As a result, I resorted to a restore of my most recent Time Machine backup, which completed just fine.
Changing out the drives was simple and quick. I then inserted my formatted USB Drive, held down the Option key, and re-started my laptop. So far so good, and I was asked which drive I wanted to install Mtn Lion on, but the problem was that my new SSD was not listed as one of the options, so I took out the new drive and re-inserted my old SSD.
When I ordered the new drive, I ordered the one that came with a Data Recovery Kit, which included a CD and a nifty little adapter that attached to your drive, with a short USB cable on the other end. I attached the adapter to the new drive, plugged in the USB end, and then opened Disk Utility. I then realized that the new drive was never formatted, so I thought I had found the problem as to why the new drive never showed as an option when I wanted to install a fresh copy of Mtn Lion. I quickly reformatted the new drive, then re-installed it in my laptop, then re-started and held down the option key. Still, the new drive was not showing as an option to install Mtn Lion.
However, it did show as an option if I chose to install a Time Machine backup, so that is what I did, and the restore process was quick and effortless. In the end, I have a new 512 GB SSD and am happily continuing with my computing. Still, I have to wonder why the new drive was never available to me as a destination option for a fresh install of OSX 10.8.2.
Any ideas if I missed something along the way? Why did the new SSD not show as an option for a fresh install?
Nick Andriash
[email protected]
17" MacBook Pro, 2.3GHz Intel Core i7, Memory 16 GB, OS X 10.8.2
AMD Radeon HD 6750M 1024 MB
iPad2 WiFi & 3G, 64GB
iPhone4S 32GBDrive Preparation for Lion
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select the SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is done quit DU and return to the main menu. Select Reinstall Lion and click on the Continue button.
Maybe you are looking for
-
Here is the scenario: The current customer Domain as been active since NT, and has seen every version of Exchange. The domain has also had multiple admins, each who gave it their 'golden' touch. (Not a good thing, because the majority of them it app
-
Preview.app - Behaviour of Tiger's Preview for Leopard's Preview?
Hi there, I am a web designer and I use Leopard's Preview to look at different pages of a website's design. This includes opening several pages as images and switching between them. And this is where I'm having alot of issues with Leopard's Preview.a
-
How do I merge 2 different backups in a new iphone?
Hello to the community. So here's my story: 1. I had an iphone4s that had some issues and went to the store for replacement etc. I was wise enough to make a backup. And actually I gave that backup folder a name "iphone4s backup" so that itunes or me
-
Has anyone gotten openvpn and a tun driver to work on AMD64 solaris 10 ? I tried to compile the tun program from http://vtun.sourceforge.net/tun/ but I get this error : # make cd solaris; make all make[1]: Entering directory `/download/tun-1.1/solari
-
Web Gallery: image adjustments during creation of web gallery?
I've noticed that when my images get uploaded to a web gallery, they look very different: it looks like they've been gamma'ed up, desaturated and had sharpening applied. It's quite a significant difference and it don't look good. I checked to see if