IOS 8.2 Update cellular reception worries.

Hi there guys,
My friend and I just updated our iPhone 6's to the new iOS 8.2 firmware only to find that our cellular reception which would normally be at least three bars in our current location is now none. Our phones seem not to be able to find our provider's network. Possible premature launch?
*Update*
Interestingly enough after rebooting our phones, cellular is now working correctly as it should. I'm going to post this thread anyways just to make people aware of this incase other people face issues and start panicking.
No biggie, just restart your device

Hello! I'm experiencing the same issue here in Costa Rica, I have no signal bars but shows my Carrier also the 3G is working fine but not able to use cellular connectivity, I have this issue with a iPhone 6 GSM + CDMA and an iPhone 5S, is there any carrier update availabe to my Country or other way to fix this? I already did all the steps you mention on both and tried on all the iOS from 8 to 8.2.

Similar Messages

  • Can i update ios 8.0 via cellular data network?

    Can i update ios 8.0 via cellular data network?

    No, it uses too much cellular data. Also if your phone is running fine on IOS 7.1.2 I'd hold off upgrading until a few more  of the bugs have been worked out of IOS 8.

  • Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home.  Any suggestions on where to look to fix this?

    Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home.  Any ideas on how to fix this?

    That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
    You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

  • IPad2 Issues after iOS 8.1 update

    iPad2 64g wifi + cellular -   very slow and non-responsive since iOS 8.1 update.  nonstandard Apps seem to be working fine.. it’s the standard item like photos and safari that don't  respond. 
    photos -  (which I use daily to show clients examples)  will freeze and kick me out back to the home page when trying to do anything from open a photo for viewing to trying to delete a photo. Edit.. forget it.   better off using an alternate app to edit a photo as it locks up and crashes every time.   I really need to be able to view the photos  on my iPad2
    safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
    Overall - the touch screen is glitchy since the iOS 8.1 update.  It was slow after the iOS 8.0 update  but has become almost unusable after the 8.1 update.
    I cannot afford to purchase a new iPad.  And I really need to find a way to make this one work.
    I did read about how to restore to an older iOS version.   The only problems are all of my laptop is Windows based and the instructions assumed you had a Mac.   I did a backup to iTunes prior to the 8.0 update but I have also done backups since.   So I am not sure I have a “clean” iOS 7 backup.
    Any ideas would be appreciated   Thank you in advance for your help
      Deborah

    zooga wrote:
    safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
    For the touch issues in Safari, does scrolling or zooming the page before you try to tap a link make it work again?  I've read a few posts that this may be a workaround for that issue.

  • Lose connection to wifi every few minutes, after iOS 7.1 update

    I just recently updated my iPad to iOS 7.1
    My iPad is the model w retina display, cellular capable but with the data plan currently disabled.
    Immediately following that update, I can no longer stay connected to my home wifi.  My connection lasts from 30 seconds to maybe 10 minutes, seemingly dependent on the amount of load I attempt to put on the connection. (i.e. downloading a movie or any video will drop the connection in seconds)
    I have updated the firmware on both my wifi router, and my wifi range extender.  Connecting to either gives the same results: a disconnect within minutes.
    Other devices can connect and stay connected on both the wifi router and the wifi extender.  Resetting the router, the extender, my ipad, or any combination yields the same erroneous results.  Airplane Mode, wifi off then back on, and rebooting the ipad all yield the same results.
    This iPad was able to maintain a connection before the iOS 7.1 update.

    Hello omniges
    Continue your troubleshooting with the article below. Try forgetting the network by going to Settings > Wi-Fi, and tap the info button and then tap Forget this Network. You also may want to reset the network settings on your iPad as well
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Regards,
    -Norm G.

  • IOS 5.1 using cellular data with no apps open

    Just upgraded iphone 4s to iOS 5.1.  Now when I am not connected to wifi, my cellular data usage is constant and rapid.  No apps are open, no data usage that I am aware of.  But when I check the cellular data usage, it goes up by about 1MB every minute.  Just the day before on iOS 5.0, no cellular data would be used with all apps closed.

    Iphone 3GS. updated to iOS 6.0.1 Friday. Data usage until then about 300MB
    Sunday Morning around 4am. Phone incredibly hot even though connected to charger and home Wifi network. Usage exceeds 3GB for month and extra 3.5GB. Total usage in 12 hours 6.5GB.
    Sunday afternoon after receiving message from AT&T about excess data, turned off Cellular Data and 3G and limited to only Wifi.
    Monday evening 2GB cellular data. Total data usage in 2 days 9GB????? W/T/F ???
    Even when 3G and cellular data is turned OFF, 2GB used up?
    Now, turned OFF Cellular data and Wifi and using it as a regular phone with texting and calling. Maybe will buy a regular phone and be done with all these useless charges. Someone should be held accountable here.
    PO.

  • Call Forwarding Breaks with iOS 8.3 Update on iPhone 6 and iPhone 6 Plus with AT&T

    Ever since the iOS 8.3 Update, call forwarding is no longer working on my iPhone 6 Plus.  I have spent dozens of hours troubleshooting with both AT&T Advanced Business Technical Support as well as many hours with top technicians from Apple at my local Genius Bars.
    This is a critical bug for me as I used to use the call forwarding option multiple times a day, EVERY DAY, because when I am in certain business locations my mobile phone gets no reception and calls go right to voice mail.  I need to have them forwarded to the land line I'm located at. 
    APPLE, PLEASE HELP!!!
    I've done extensive testing, and this seems definitely to be related to Apple iOS 8.3, and it seems to be specific to the iPhone 6 and iPhone 6 Plus ONLY. 
    To illustrate the EXACT problem:
    A: Settings -> Phone -> Call Forwarding
    B. Call Forwarding - Turn on
    C. Enter Number and return to previous screen by touching the blue "Call Forwarding" to return to previous screen.
    D. Call forwarding button is "green" for a split second, then returns to previous OFF state and no forwarding number is displayed.  DOES NOT WORK.
    NOT AN AT&T PROBLEM.  IF SOMEONE IS EXPERIENCING THIS WITH OTHER CARRIERS PLEASE COMMENT HERE.
    Further validation this is isolated to iOS 8.3 on the iPhone 6 and 6 Plus ONLY and not the sim card from AT&T...
    Here are the latest steps I did with my AT&T sim card and my wife AT&T sim card (she has an iPhone 5s):
    1. Removed my sim and put it in the 5s. The phone said that a "carrier update" was required and I selected "NO" to that prompt.  Call forwarding functionality worked as expected on the 5s running iOS 8.3
    2. I removed the sim from the 5s and re-inserted it.  This time I selected "YES" to do the carrier update to eliminate that as a variable, and the call forwarding functionality still worked as expected.
    3. I then placed my wifes sim in my 6 Plus. Call forwarding functionality does NOT work on the 6 Plus (was not prompted for carrier update). Also, keep in mind this is my second phone (Apple provided me with a new iPhone 6 Plus when they couldn't resolve the problem at the Genius Bar after hours of troubleshooting).
    Note: I did one additional test which as interesting:  I put my sim in the 5s and turned call forwarding "on".  Then, I put the sim back into my 6 Plus.  The calls were still being forwarded to the number I put in while it was in the 5s, but the call forwarding interface in the 6 Plus showed that it was NOT forwarding calls.  I could not turn OFF the call forwarding from the 6 Plus and had to put the sim back into the 5s in order to turn off the call forwarding.
    If anyone has an update on this, or any other suggestions please advise!  This is a critical issue for me as when I travel and when I am in poor areas of reception I need to forward calls.  This is a featured I was using multiple times a day, EVERY DAY.
    APPLE?????????  HELP!!!!!!

    Yes, I am dealing with this right now on at&t with a 6 plus. I've been down the same road as you. I got it to work with a windows phone yesterday but not my 6 plus when I switched back to the iPhone. My wifes 6 works fine. I believe it is an at&t issue and not an 8.3 issue. After dealing through several levels of support at at&t, they are telling me it has to do with their transition to hd voice. Some people are having this issue because they are updating their system and some peoples phone profile, on phones that have hd voice capabilities, are not getting added to their line and call forwarding will not work without it. I have a trouble ticket open to their engineering dept and they promise it will work for me on or before the 24th of april. Engineering has to build my phones profile so call forwarding will work with my iPhone.
    This is frustrating because like you, I need to forward my calls because I have no signal in my office and need to forward to another phone so I can get my calls. If at&t would quit dragging their feet and enable wifi calling, this wouldn't be an issue for me. I would suggest you put more pressure on at&t and escalate this until it gets resolved. Or put your sim in a phone that does not have hd voice capability and see if it works then.
    Good luck. I'm keeping my fingers crossed this will be fixed for me on or before the 24th. We'll see.
    EDIT: I see you did put it in another phone and it worked. That backs up that the issue is at&t and their hd voice upgrades. They had no explanation as to why some work and some don't, but have them make sure a profile for your phone is on the line. If not, they'll need to build one for the phone so that it''l work. At least that's the story for now. Like I said, I'll know more in a day or two.

  • HT201210 latest ios 7.02 update killed my iphone 5

    Just applied the IOS 7.02 update to my iphone5 and it killed it. iphone boots to one screen option which is connect to itunes, but itunes can no longer see the phone. So how do you fix this? How to get a working IOS back on the phone without any IOS?

    Hi Julia D.
    Welcome to the Support Communities!
    The article below will explain how Apple ID's are used with various services like iCloud and the iTunes Store.
    Do all of the members of your family share the same Apple ID for both?
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Here is some specific information for setting up the Messages app:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Ensure that iMessage is turned on in Settings > Messages.
    To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
    iPhone: Troubleshooting Cellular data
    iOS: Troubleshooting Wi-Fi networks and connections
    iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
    If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
    Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • After the last iOS 7.1 update my phone is taking a really long time to receive and send pictures over messaging. Is there a fix?

    After the last iOS 7.1 update my phone is taking a really long time to receive and send pictures over messaging. Is there a fix?

    iMessages or MMS?
    MMS and SMS are exchanged over a carrier's cellular network only. Contact your carrier regarding a problem with MMS/SMS.

  • Car Stereo No Longer Recognizes iPhone after iOS 7.1 Update

    I connect my iPhone to my car stereo with via USB (the stereo doesn't have bluetooth) and now after the iOS 7.1 update, it no longers works in my car. My stereo displays an error message of 'iPod err' when I connect it. I've used this same car stereo and USB cable to connect my iPhone for years without any issues, until the 7.1 update a couple days ago.
    Anyone else having this issue? This is real frustrating.

    In another thread on this issue, Brendan writes:
    Turns out restarting my car and/or rebooting my iphone "fixed" the issue. Apparently this was unrelated to the iOS 7.2 upgrade. Honda + iPhone has been rock solid (even if the Honda Fit UI is terrible), so I'm not sure what to make of this problem. Maybe a glitch? Who knows.
    Here is the URL for that thread: https://discussions.apple.com/message/25211736?ac_cid=tw123456#25211736
    His suggestion worked for me: turn off your car, completely shut-off your phone and let it sit a few minutes. Then reboot phone and start car and try again.
    Good luck!

  • Smart Cover doesn't put iPad into Sleep mode in Unlock position after iOS 8.3 update

    Prior to the iOS 8.3 update, closing my Smart Cover would put my iPad into Sleep mode when in the Unlock position.  Since the update, this function no longer works in the Unlock position.  In the Lock position, I hear the click and the iPad does go into Sleep mode.  Since I am the only one using my iPad, I don't need it locked when at home.  Has anyone else experienced this problem?

    hi guys. i'm back.
    i solved my problem. i refer my iphone 5 to a local distributor. a repairman checked my iphone and i described my problem. he checked my battery. it was fine! then after an hour excavation around hardware solution he told me that the charging kit crashed because of heavy mobility usage!
    yes. i did not covered my phone with any cover. the cpu pressure by ios update crashed the kit! now my phone get back after the kit changed and work finally. i restored my phone to ios 8.2 now.
    i'm going to buy new iphone. but i'm really confused if such this issue really happened for iphone 6 too!!!!!
    i'm totally disappointed .

  • IOS 8.1 Update has "BRICKED" my iPad 4 128Gb

    I am exceedingly angry about everything to do with iOS 8.x.  The 8.0 update mad everything intolerably slowm update 8.02 resulted in repeatable and constant crashing of Safari, mail, messaging, and other apps.
    This morning I decided to try the Update to iOS 8.1 only because life has been extremely miserable after iOWS 8 came out.  Twice, the iOS 8.1 update stated that it COULD NOT BE COMPLETED based on an error which it did not disclose.  I then reduced the number of apps and deleted documents to reduce what was stored in memory.  The iOS 8.1 update still failed.
    I then decided top do a hard reboot (Power Button and Home button hold)  ever since that, my iPad has been locked with the Apple Logo stuck on the screen.  It appears to be trying to reboot but is not.  It stays on for 20 - 30 min, the screen blacks out, the iPad shuts down, and then tries to reboot again.  It has been doing this now for over six hours.  It does not respond to any power button or home button pressing at all nor is it shutting down.
    I am really angry that Apple botched iOS 8 up and has done a miserable update to a perfectly running iOS 7.x system.  I am also angry that everything at this point seems to be lost document and photo wise since the last backup a couple of weeks ago.
    Has anyone else had this experience with the iPad 4 128 GB machine?
    Has anyone been able to get it to finally reboot?
    I'd appreciate any help.
    -- Glenn

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

    I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • HT4623 Reminders won't work after iOS 6.1 update on iPhone 5?

    I updated to the new iOS 6.1 update last night. Went to make a reminder through siri and i get to the point were it asks to confim. When I press confirm Siri tells me that she can't do it. I try to set a reminder manually and the app does not give me the option to add a reminder manually. Everything worked fine before the update when my iPhone 5 had the 6.0 iOS?
    Any ideas on what the problem coulb be? Any help would be appreciated.
    Thanks in advance.
    GS47

    The problem is more than likely being cause by corruption that occured during the iOS install or in the backup that was used to restore the phone after the update.
    Standard troubleshooting is:
    Re-boot the phone
    Restore the phone from your backup
    Restore the phone as a new device.
    One of the 3 should fix the problem.

  • Can someone please help my iphone 4 is stuffed after ios 7.1 update?

    Hi everyone I have a friend who accidentally press on the new ios 7.1 update and now my iphone 4 is stuffed up.
    My list of problems are:
    Home button doesn't even work it use to work fine with ios 7.0.6
    The battery drains so easily
    It keeps telling me to trust the computer no matter how many times I press trust (can't connect to itunes because of this)
    It would screeen shot itself for no reason
    The powerbutton doesn't work sometimes
    My apps lag a lot or it gets stuck (have redownloaded all my apps but still it doesn't work)
    Could someone please help me out. I m so disappointed with apple now and I need a way to fix my phone. I don't have money to buy another one and I m out of warranty. If someone could suggest a way it would be much aprreciated.

    Lintastic wrote:
    If someone could suggest a way it would be much aprreciated.
    Connect to iTunes on the Computer you Usually Sync and Backup to and Restore as New
    See  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download

Maybe you are looking for

  • A few questions from a new iMac user!

    So far I am loving this computer! However there are a few things that I can not figure out how to do and really dont have time to go to the store for a class at the moment. So hopefully you will be able to help me out. 1. We have iWorks installed and

  • Screensaver and screen not dimming

    in bootcamp. I have a santa rosa MBP and I have a problem with the screensaver and the screen not shutting off. I set the screensaver to turn on in 1 min and the screen to turn off in 5 and it still doesn't work. I unplugged everything and it still d

  • Boot drive access locked

    My boot drive has become locked (now a folder with a red minus mark instead of a drive icon). In get info it says "you have no access" System and admin are listed as having no access. Can't change these. Is there a terminal command I can use to fix t

  • Dump during archive job runs -  TSV_TNEW_PAGE_ALLOC_FAILED (snote 1017000)

    Hi All,     I'm currently having problems with the deletion/archiving process on one of my XI boxes. I has been configure to use the Switch Procedure and, the error happens during the TABLE_SWITCH procedure.     Due to this error, I have 1 dump per d

  • Creating standby database through Grid Control.

    Hi, I want to know if source database which we term as primary database goes down during Db creation process when given option of "Perform a live backup of primary database" during Add standby wizard in Grid Control. Please let me know if people have