Ios 8.2 wifi connection no longer working

"upgraded" to ios 8.2 on iPod touch 5 and now no wifi connectivity no matter what steps. Already did the reset, hard reboot, etc .

Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost Likely you did this but not sure what a hard reboot is)
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

Previously succesful public wifi connection no longer works for Ipod Touch?

I work at a small airport in canada. Free public wifi is available via an Aliant Hotspot. I've used my Laptop on many occasions there. When i purchased my Ipod touch, 4th generation, it worked fine too. Until recently. Now, the touch recognizes that the network is there. it connects, or so it appears, but the welcome page will not load to allow me access to the interent. Please help me! Normally, as soon as i choose my hotspot network, the welcome page comes up, allows me to select my language.... legal agreements... another page as a welcome, and then full access the internet.... now nothing.
I'd be so grateful for some help!

Diane,
You're very welcome, I know that is some kind frustrating when a problem appears and it's quite difficult to find the solution.
So let's trying with this:
Based on your feedback it seems that the iPod is receiving correct data from the router, what we can try here is the following:
Connect the iPod touch into the network, and copy the network data (IP Address, Subnet Mask, Default Gateway, DNS) into a piece of paper, then in the iPod Options of the network, there must be a button indicating DHCP, now press a button that must say Manually and the network data will be erased, then you must capture the information that you had copied in the paper.
When you finish, wait a couple of seconds and then do a test.
Here I have a question, you said that the iPod worked fine until recently, so another tip is try to connect your iPod to another network, this may discard that the problem with your iPod could be a hardware problem.
But first try with the insertion of the data manually.
We keep in touch!,
:: Appletoch ::

I used to send photos from my Lumix Tz-40 camera directly to my iPad using the cameras WIFI. Since I installed IOS7 the connection no longer works. Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

I used to send photos from my Lumix Tz-40 camera directly to my iPad using the camera's WIFI. It was all working well until I installed IOS7. The connection no longer works. The camera still keeps the iPad in its connection history. The camera's wifi network still appears when I select a WiFi network from the iPad but the Wifi status icon never appears on the iPad. So the connection is never made.
Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

IOS 7.1 update problem. Wifi disabled, no longer works. Disappointed with apple response

I have several IOS devices and updated each of them to Apple's release of IOS 7.1.
Unfortunately my iPhone 4s did not update successfully. It was affected by the widely reported issue regarding WiFi being disabled permanently. After the update to IOS 7.1, wifi is no longer an accessible option on the IPhone 4s.
After doing some online research and identifying this as a common problem, I tried some of the suggestions available online such as resetting settings and restoring from backup. None of these suggestions worked.
I brought the iPhone 4s to the apple store at the Rideau Center in Ottawa, Ontario, Canada and spoke to one of the employees. He stated that it was not an apple issue and that it was a problem with my phone that would cost $200 to resolve. He said that it was not a problem related to the ios 7.1 update and that it was a "coincidence" that it happened at the same time as the update to ios 7. 1 and was probably an issue with the wifi chip.
It is surprising to me that applying an update recommended by apple and using the iPhone 4s in the manner in which it was designed (using wifi) would cause this basic function (wifi) to cease to function.
Wifi is an essential part of my day to day use of this device. I am appalled that apple is denying the problem and has no resolution for it.
If anyone else this problem, please go to your nearest apple store and let this forum know your experience in getting the issue resolved.

Somewhere in there, is there a question for us, your fellow users in these user to user support forums?

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

MacBook to tv connection no longer working. OS 10.8

I have a mid-2010 MacBook, running OS10.8. I was able to use my Panasonic TV as a monitor but the connection no longer works. I tried the "Safe Mode" solution and that worked for awhile. After trying to connect (unsuccessfully), when I turn the tv off (still connected to lap top) the lap top screen flashes blue for a nano second.
Any suggestions for getting around this problem?

Your version of Mail didn't upgrade properly because you've moved it from its expected location location (to a sub folder you've named "APPLE apps").
Move it back into the HD/Applications folder and apply the 10.6.8 "Combo" update to fix things.

Remote Desktop Connection no longer works.

After verifying that all Remote Desktop Connection settings and firewall settings match the requirements, I cannot connect to the host computer running Windows 8.1 Pro with Media Center from a client computer running Windows 7 Home Premium SP1 over my
home (private) network. I was previously able to connect these same two computers when the host computer was running Windows XP Pro, but now that I have upgraded its operating system to Win 8.1 Pro the connection no longer works. The Windows Troubleshooter
cannot find the problem. What is wrong?

If you turn off a firewall in a router it is still using NAT which will also act like a firewall. In my experience its better to let your router be the firewall.
On most routers that have an SPI firewall you have to setup 2 rules to allow remote connections. One would be the firewall rule and other would be the port forwarding(NAT) rule.
Are you forwarding the correct ports to your mac from the router? Does your Mac have a fixed IP address?

HT1386 After upgrading iTunes to 10.7.0.24 and upgrading my iPad to 6.0.1 WiFi Sync no longer works.

After upgrading iTunes to 10.7.0.24 and upgrading my iPad to 6.0.1 WiFi Sync no longer works.
Followed the FAQ's on the Apple Support but no joy.
Anyone knows what more I can do?

In iTunes under the Store tab try Authorizing the Computer

TC 2 TB A1409 Wan internet connection no longer working but light is still green?

TC 2 TB A1409 Wan internet connection no longer working but light is still green?
My TC and modem have been up and running for at least the last 2 years without any issues.
It recently started acting up and I would have restart it as I had no internet access. All of a sudden My TC stopped connecting to internet regardless of restart. Utility shows i have no internet connection. I had all the correct green lights on my modem. I figured it might be the modem and connected directly to single ethernet port in modem to my mac book and it worked. When I reconnect modem to TC and restart Modem, TC still shows no internet connection in utility even though I'm getting green sync light on TC.
Help Please.
I'm out of warranty, I have not reset to default yet, Im not sure if I will loose my TC back up data.
please advice
Remy

The Gen4 has some nasty faults.. mostly unrepairable...
If the WAN is gone it becomes pretty well useless at least in its current role as router.
You might still be able to plug it in by ethernet to a LAN port in bridge.
Do try a full factory reset.. always worth a go.
No files will be lost on the hard disk.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Check the ethernet LED is going on.. both on the modem and the TC WAN port.
Do you have any applecare on a computer? If so it might cover the TC.. the rules are complicated but if the TC was bought within 2years before or after the computer it is covered up to max of 3years. You can still get coverage therefore if the TC is over 1 year but less than 2 years by buying applecare now on a computer or an Apple TV which is not too expensive. You can sell off the Apple TV without even opening it.. but use the applecare on it to get your TC replaced.
Only the very first Gen4 will be up to 3years.
Did you have a lightning storm or something btw?? Sometimes the modem can survive and pass the parcel to the TC which seems rather fragile.
There is also a trick to test..
You must have v5 airport utility.. any older Macs, or windows computer you can load on 5.6 utility .. even dual boot/parallels mac.
Go to the WAN setup.. and set the ethernet port to 10mbit half duplex.
Sometimes a damaged port can still manage the slowest speed.. by magic.

Every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.

Since downloading ios 7, the microphone function no longer works.

Since downloading Ios 7, the microphone function no longer works even though it is enabled in settings.

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

TS3367 Facetime not working on Macbook Air. Wifi connection good - everything working. Can get through to my partner via facetime app on my phone but not Macbook Air?

Wifi connection good - everything working. Can get through to my partner via facetime app on my phone but not Macbook Air?

Hi Sophie172,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
Cheers,
- Judy

My iPad 3 wifi connection has been working perfectly.

My iPad 3 wifi connection has been working perfectly. Now I have lost automatic connections and when I join wifi told it is the wrong password. IT IS NOT. I have reset the network settings and can then connect with no problem. Keeps happening every time I try to join another wifi connection. Seems I can only store one connection at a time. This is a new problem and previously all of the connections I am tying to join worked absolutely perfectly. Is this a software update problem?

Thanks. Seems unlikely that several Wi-fi routers that were working fine have simultaneously stopped doing so.
Have tried a full system reset and set up the ipad as a new device again. Will find out whether that has worked when I try to connect my next wi-fi router tomorrow morning. I will also double check with the other ipad users whether they have been experiencing any problems with the router I could not connect to today until I reset the network settings.
Thanks again

Ios 7 wifi connected but not working

my iphone 5s running ios 7 is connected to my home wifi but its not working, but my pc is doing fine on that wifi. and when i try connecting my iphone to other wifi it seems to work without any problem. i've reseted network settings many times and reseted all settings once but it wouldnt work for me. so whats the problem and how can i fix this?

Try power cycling your router. Remove the router from power for about 30 seconds and then start it back up again. After it is finished configuring, try connecting your device again.

My wifi is no longer working in my home office

I have had my desktop in my office for over a year, last week it stopped working. All other devices are working fine. I can move my desktop to other rooms in the house and wi-fi works fine, but when i plug it back in the office it no longer works. I can only conncect in that room via wifi and now I am stuck. My laptop connects to my wi-fi in the office. I am stumped.

...I don't know what that all means, but when I do it on my laptop I get a transmit rate of 104 and an MCS index of 13. Don't know if that means anything, all other values are the same from both computers
The PHY Mode represents the radio mode that your iMac is connecting to the Wi-Fi network. In this case 802.11n.
BSSID: This is the router's hardware ID. This lets you know which router your iMac is connected to.
Channel: This is the radio and radio channel that your iMac is connected to. In this case, it is connected to channel 7 on the 2.4 GHz band. The only channels that do not interlap, in this band, are: 1, 6, or 11. With your iMac connecting to channel 7 leads me to believe that there may be some form of Wi-Fi interference in the area from this location to it to have to choose another channel.
RSSI: This is a measure of how "strong" the Wi-Fi signal is as perceived by your iMac. The closer this value is to zero, the better.
Transmit Rate: This is the current maximum connection rate that has been established between the iMac and the wireless router. It should be much higher than this.
MCS Index: This is the encoding method used for the wireless connection. It also indicates how many streams are being used for the connection. Depending on the model of your iMac, it should be able to connect with up to three streams. Your wireless router would need to have the same capability for both to connect in this method. Basically the more streams the better. The value of 11 is telling me that it is only using two of those three streams ... and thus why the max transmit rate is so low.
The only thing I can't tell you is why, at this location, your iMac is performing so poorly. Again the only thing I can think of is Wi-Fi interference.

Ios 8.2 wifi connection no longer working

Similar Messages

Maybe you are looking for