IOS 8.3 Airplay issue

I have an iPad Air 2 and iPhone 6+, both are upgraded to iOS 8.3 recently.
I've noticed when I am using Airplay to watch web content, usually a short video on a web page, the airplay would gut out randomly (every 3-5 minutes or so). When this happens, the video continues to play on the iPad or iPhone, but seems Airplay connection was dropped. Before the upgrade, those videos were playing on my apple tv streaming from my iPad Air 2 and iPhone 6+ perfectly. I did check my apple TV software, it says no update available.
Anyone else have seen this issue, or have reported similar issue to Apple? Looks like an iOS 8.3 specific issue to me.

Greetings bgeiOS,
If you are having an issue with losing AirPlay connection during use from your iOS devices, I would suggest that you troubleshoot using the steps in this article - 
Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
In particular from the section titled If your playback is interrupted, or you have network lag -
You might notice these issues if you have a weak Wi-Fi signal or interference from a different device, like a microwave or baby monitor. Try these steps:
Make sure that you're using the recommended settings for your Wi-Fi router.
Move or turn off other devices that might cause interference.
Try connecting your Apple TV directly to the router using an Ethernet cable instead of Wi-Fi.
Some apps might stop AirPlay when you lock your device or put your device to sleep.
Thanks for using Apple Support Communities.
Be well,
Brett L 

Similar Messages

  • Airplay issue

    After upgrade to IOS 8.0.2 and apple tv to the latest firmware, the airplay all stop working.
    ipad air airplay not working
    iphone 5, 6 airplay not working
    iphone 6 plus IOS remain in 8.0 working
    how come there is nobody complaint about airplay in discussion.

    I had same issue. Try restarting your iOS device and AirPlay should reappear.

  • IOS 8.1+ Performance Issue

    Hello,
    I encountered a serious performance bug in Adobe Air iOS application on devices running iOS 8.1 or later. Approximately in 1-2 minutes fps drops to 7 or lower without interacting with the app. This is very noticeable in the app. The app looks like frozen for about 0.5 seconds. The bug doesn't appear on every session.
    Devices tested: iPad Mini iOS 8.1.1, iPhone 6 iOS 8.2. iPod Touch 4 iOS 6 is working correctly.
    Air SDK versions: 15 and 17 tested.
    I can track the bug using Adobe Scout. There is a noticeable spike on frame time 1.16. Framerate drops to 7.0. The App spends much time on function Runtime overhead. Sometimes the top activity is Running AS3 attached to frame or Waiting For Next Frame instead of Runtime overhead.
    The bug can be reproduced on an empty application having a one bitmap on stage. Open the app and wait for two minutes and the bug should appear. If not, just close and relaunch the app.
    Bugbase link: Bug#3965160 - iOS 8.1+ Performance Issue
    Miska Savela

    Hi
    Id already activated Messages and entered the 6 digit code I was presented with into my iPhone. I can receive txt messages from non iOS users on my iMac and can reply to those messages.
    I just can't send a new message from scratch to a non iOS user :-s
    Thanks
    Baz

  • Just updated to IOS 7 and two issues:  First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

    Just updated to IOS 7 and two issues: 
    First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".  I'm not sure what this really means...
    The second issue is when I try to select "Manually Manage Music"
         The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC".  Do you want to erase this iPhone and sync with this iTunes library?  An iPhone can be synced with only one iTunes library at a time.  Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
    So... I don't want to do that, but I do what to be able to Manage my music.  I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
    Anyone have any ideas?

    I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

  • Airplay issues on Macbook Pro 13 inch

    Hi,
    I've upgraded my Macbook Pro 13 inch (Mid 2012) to Mountain Lion, and I also have an Apple TV 2nd generation (720p) which has the latest software.
    If I use the Airplay icon in the menu bar, and choose "Apple TV", all that seems to do is switch my MacBook Pro to what looks like a scaled down 1080p resolution. Nothing else changes. The options in the Airplay menu don't change at all. It doesn't even tick of the Apple TV option. To get my Macbook Pro back to 1280x800, I have to go into Display Preferences and choose "Best for built-in display".
    If, while in Display Preferences, I choose "Apple TV" from the "AirPlay mirroring" menu, AirPlay mirroring seems to work fine. My MacBook Pro resolution stays the same, and the AppleTV shows an exact copy of what I see on my MacBook Pro.
    If I then choose "Off" from the "AirPlay mirroring" menu in Display Preferences, the Apple TV goes back to its menu, as expected, but the MacBook Pro switches to the 1080p-looking resolution again. Again, I can choose "Best for built-in display" and the MacBook Pro returns to normal.
    I'm tempted to do a clean install of Mountain Lion on a new disk partition, but I've only had the MacBook Pro for about a month, so am not so keen on doing that unless I know that will really make things better. I'm also tempted to get the new Apple TV in the hope that it will work, but it doesn't seem like it's worth the "upgrade" considering it only really gives me a higher resolution on my TV and nothing else. And there's no guarantee that the AirPlay issue will be fixed either.
    Does anybody else get this issue?

    The symptoms I'm getting now, and I'm not sure if they're any different, suggest that for some reason Mountain Lion thinks my display resolution is higher than what it is, as wether I'm turning AirPlay on or off, it keeps changing it (on the MacBook) to what looks like maybe 1080p.

  • TS4002 iOS 6.0.1 issues

    i completely lost access to mail after installing iOS 6.0.1. It won't even open now.

    So to confirm, you have done the following?
    1- Hard Reset device.
    2- Restarted device.
    3- Reset Network Settings.
    4- Reset All Settings
    5- Restored as New and then trialed issues without having ANY person data on the device.
    If you HAVE done all those steps, then have device replaced.
    If you have NOT done all those steps, do them, then let us know what happens when they have been done, possibly in a less pretentious and ranting way, realising that a) we are fellow users, we have no control over the situation, so complaining to us does nothing to help you, and b) Dropping game titles and using the FAR too used "Steve Jobs must be..." line does not give you the appearance of intelligence, but someone who's phone doesn't do what they want it to do, and thinks they're the center of the universe because of it.
    We realise that there are thousands of results when you search "iOS 6.0.1 issues" in google, but what YOU have to realise is that the results will include duplicate results within single threads, are related to multiple different devices, and in some times use a VERY loose search terms (you may find results like "What issues do you think will be in iOS 6.0.1" as a forum thread) because you have made a broad search.

  • IOS 8.1.1 - Issues with hands free (Parrot MKi9100)

    Dear Community...
    I have updated my iPhone 5 to iOS 8.1.1.  Exactly since that day I am experiencing an issue with my in-car hands free kit (Parrot MKi9100):
    Normally, while the iPhone and the hands free kit are connected, whenever the iPhone makes a sound (be it phone-calls, music, notifications or the text-to-speech function), the hands free kit jumps in, muting my car radio and playing the iPhone-Sound over the car speakers.
    On iOS 8.0, that would only function with phone-calls, any other sound was not transferred to the hands free kit.
    On iOS 8.1, the issue was fixed, and everything worked fine.
    On iOS 8.1.1 the following happens: Whenever I wake my iPhone (i.e. pressing home-button or sleep-wake button, even without unlocking the phone) the hands free kit jumps in and mutes the radio... although the iPhone is not about to make a sound... This also happens, when the iPhone is switched to silent mode. Whenever the iPhone-Display is switched on, this will mute my car radio, as if the hands free kit was awaiting a sound from the iPhone.
    This makes it impossible to enjoy the car radio and using the phone (of course only the passenger will use the phone, while I'm driving... I am a responsible driver...)
    But nonetheless: Is there any known fix?
    @apple: If not, will this be fixed with 8.1.2?
    Thanks and best regards
    cihag

    #cihag
    i have the same problem with Parrot MKi9100. Before on 8.1 all works fine!
    Apple WHY ????????????????????????????
    Bye

  • IOS 6.0.1 issues

    I am having problems with wifi and ios 6.0.1.
    Before the update had problems with staying connected to the home wifi and had to type in password regularly. Updaed to IOS 6.0.1 and i dont have to type in password yippee!
    The problem I am having now is the network is so sssslllloooowwwwwww. We have 3 iphones in the house my old 3gs (gave to daughter) my 4S and my wifes iphone5. The 3gs and iphone5 no problems with internet my 4S is a waste of time. The phone as already been replaced by Apple a couple of weeks ago.
    Can someone point me in the right direction as to settings on the phone to make it work?
    As anyone resolved the network issues?
    I cant go to another phone although right now I feel like abandoning iPhone completely and going to Nokia.
    Adrian

    So to confirm, you have done the following?
    1- Hard Reset device.
    2- Restarted device.
    3- Reset Network Settings.
    4- Reset All Settings
    5- Restored as New and then trialed issues without having ANY person data on the device.
    If you HAVE done all those steps, then have device replaced.
    If you have NOT done all those steps, do them, then let us know what happens when they have been done, possibly in a less pretentious and ranting way, realising that a) we are fellow users, we have no control over the situation, so complaining to us does nothing to help you, and b) Dropping game titles and using the FAR too used "Steve Jobs must be..." line does not give you the appearance of intelligence, but someone who's phone doesn't do what they want it to do, and thinks they're the center of the universe because of it.
    We realise that there are thousands of results when you search "iOS 6.0.1 issues" in google, but what YOU have to realise is that the results will include duplicate results within single threads, are related to multiple different devices, and in some times use a VERY loose search terms (you may find results like "What issues do you think will be in iOS 6.0.1" as a forum thread) because you have made a broad search.

  • Ipad 3rd generation, iOS 8, home button issue, with fix

    I have seen a lot of iOS 8 home button issues on phones but not much on the iPad.  But I started having problems right away.  Clicking would not get be back to the home screen.  Clicking did not get me out of program.  It was all intermittent too.
    I found a good you tube video about ipad home button issues. First I tried recalibrating the home button.  You hold the power switch down till you get the slider to turn off the iPad.  then let go and hold down the home button till the screen changes.  that seemed to fix most of the problems for a couple hours.  But then it came back.
    Next tried putting a drop of isopropyl Alcohol on my finger tip and pushed down and up on the outside edge of the home button, all around the circumference.  Then did the cal again.  That seems to have worked permanently.
    iOS 8 is still slow but I guess everyone has that on anything older than a year.

    Christopher Doryan wrote:
    Hi Hexonxonx, thanks for trying to help, but next time please read the entire discussion, in oder to better comprehend what is being asked. The reason being is that your answer added nothing to what had already been mentioned.
    Like I said, I was aware it was possible to access the apps through the finder, but the question revolved around how to recover the quick launch app icons for certain vanished apps.
    Wow, kind of a snotty response to someone who was taking their own time to offer help.  Whether you thought it was helpful or not, didn't deserve such an unkind retort.  Maybe when you realize we all just users here trying to help others like you, who have issues and we don't get anything in return for the countless hours some people here spend offering that assistance, you'll maybe be a little less quick to be critical.
    Just sayin.......
    Oh and Meg offered the right answer.  Put your Apps in Folders, which will create extra space for the apps which have disappeared.

  • IOS frame work for .issue file

    Has adobe released any framework that can be used on iOS that can render .issue (folio) file that's created in DPS?
    If not, what are my other options to integrate .issue publication within my native app?

    .folio is not an open file format. you cannot build your own viewer.
    —Johannes
    (mobil gesendet)
    Am 31.08.2011 01:57 schrieb "haneul512" <[email protected]>:
    >
    Has adobe released any framework that can be used on iOS that can render
    .issue (folio) file that's created in DPS?
    If not, what are my other options to integrate .issue publication within
    my native app?
    >

  • Airplay issues after IOS 8  upgrade

    After the latest IOS 8 upgrade I have a lot of issues.
    Both my ipad and iphone are upgraded to IOS8 and after that I can't stream video to my apple tv, you can see that airplay is tries to connect to my apple tv but returns to the ipad/iphone screen after ~5 seconds. Besides of that both devices also have streaming difficulties to my B&W a7 speaker, problem with this one is that it will stop after 15 minutes and to get is working I have to restart the device.
    With IOS 7 I didn't have problems at all.
    Do others also have this many problems and what can I do about it?
    I already tried:
    - Restart ipad/iphone
    - Closed all active programs via the home button
    - Power cycled apple tv / remote speaker
    - Reset ipad/iphone (power + home button)
    - Re-install all related apps (remote, B&W, video streaming apps)
    - Reconnected to my home network
    Since I didn't have a problem before the upgrade and this occured on 2 devices after the IOS 8 upgrade, I would say this must be related to the upgrade.
    Hope someone can give me an advice.

    I was able to recover my voice memos, though the original titles are gone.
    I opened my Voice Memos app like everyone else and I saw each memo quickly deleting and acting glitchy. I then connected my iPhone to my macbook so I could attempt to restore the backup I had made before the ios8 update. It said it couldn't be done because there wasn't enough room. However, when I opened my memos app again, the voice recordings were there! I can't verify if it's all of them but I'm grateful I was able to recover some.
    I use this app to record lyrics on the go and I'd really like Apple to step up and fix this.

  • IPad Airplay Issue - iOS 8

    I work for a K-12 school district.  Teachers often use airplay and the app AirServer on our macs to mirror their iPad on their mac.  This has worked great, until iOS 8.  On iPads with iOS 8+, when you click on the airplay button in Control Center, the menu does not expand beyond showing "iPad" and the first airplay device (see image).  This is an issue because oftentimes we have SO many computers available to connect to, they are switching in and out so fast you cannot find the one you need.  On iOS 7, this menu expands, as it should, and displays a long list of available devices.  I have tried hard resets, resetting network settings, installing a fresh copy of iOS 8.1, updating to iOS 8.1.1 (we have a developer account), and even tried it on an iPad 4, with the same results. I have googled this and cannot find anyone with the same issue, is this an iOS 8 bug or is this just isolated to us?

    I work for a school district using 2100 iPads and we're also having this issue with Airplay problems since iOS 8.
    I spoke with someone at Apple and this is something they are working on fixing. Most likely it'll be atleast a couple of weeks.
    We've been giving teachers Lightning to VGA adapters so they can hard wire and avoid the issues. Super inconvenient though.
    Hope this helps you - its not your issue.

  • IOS 8.1, Airplay on iPad Mini and Apple TV

    Just to add to all the 8.1 issues on my iPad, has anyone tried using Airplay to screen share to Apple TV?  It doesn't works at all.  Its completely jumpy, it stalls and you simply can't use it.  It worked fine on IOS 7.x with no problems.
    Shut the iPad off and try the Macbook, great it works well even on Yosemite.
    Something else to add the Apple's list.

    Hi lesliefromstockton-on-tees,
    Thanks for the question. After reviewing your post, it sounds like you are having a performance issue with Airplay from an iOS device. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • IPad AirPlay issues since IOS7 upgrade

    Hi all
    Since the last ios7 upgrade i've had nothing but trouble with my AirPlay set up.
    I have the following set up:
    HP ProLiant N40L server running iTune server (latest build)
    BT HomeHub 3 / TP Link TL-PA211 WiFi extender
    iPad 3rd geneeration
    iHome iW1 AirPlay speaker
    Before the upgrade i would get some intermittent issues, but eventually after iPad restarts i could get AirPlay working. Since the upgrade 90% of the time my iPad will not see any AirPlay devices whatseover.  After a reboot of the iPad (or more) it eventually sees the Airplay speaker.  iTunes however on my server always sees the AirPlay device and has no problems whatsoever connecitng to it (please bear in mind that this is still on the same WiFi network).
    On the occassional 10% that my iPad does see an AirPlay device, I connect, and then almost immediately the AirPlay device dissappears from the iPad.
    I've spent 2 weeks now trying to sort the issue out.  As my iTunes can see the AirPlay speaker without issues and play to it, I'm assuming it's part of the ios update.
    Anyone got any suggestions, as i'm ready to throw in the towel?
    Thanks
    Simon

    Hi
    First, before you lose interest - I have a solution that works so well to get BT Home Hub 3 working with 'Airplay' and Apple TV and my iPad 4, that I am so far unable to 'break' it.  Please do try to break it yourself, and could you report back here or mark it with stars or whatever so I know what happened in someone else's setup?
    I appreciate what you are going through, all I wanted to do was get 'Real Racing 3' running for me and the kidz on the TV that is attached to Apple TV box.  Sometimes the Airplay icon appeared, sometimes not, it was chance - really frustrating.
    The nub of it is this - you 'reserve' certain aspects of how the HH3 services the wifi network, so it directs data/communications via these 'reserved' ports specifically assigning them to the purpose you need - in this case, 'stuff' (technical eh?) going to the Apple TV so that Airplay works.
    Apple forums somewhere list these publicised ports, and you go into HH3 management (tap in the IP address of the hub in 'safari' to get there, then put in your password for admin - it is 'admin' if you didn't change it already).  In short, you use one of the games/applications that already are in the list for 'Port Forwarding', and I modified the name of a new one I made to make it like 'Airplay attempt using BT alarm' or something, because I 'copied' the BT safe alarm app details to start my custom one off.  Lost yet?!  Go into the HH3 manager, go to the A-Z I think it might be in 'advanced' and get 'Port Forwarding' up.
    Ok, here's the things to set - if you peruse the apps/games they already list in HH3 for this sort of thing, you will see entries under 'TCP' or 'UDP' headings, and it's these sort of things we want to reserve.  I only set the single specific addresses (it's just a number to you and me) that were listed on the Apple site as being to do with Airplay:
    There are only 2 bits to set - you hit the button on screen in HH3 manager, to 'add entry', then select in the box marked 'protocol' that you want TCP or UDP according to the info I dug up from Apple site below - don't worry it is not complex to do you are just editing a couple of figures on a thing you don't use.  Incidentally, I left the first two entries as they were (1024 was in there already) because I am just timid!  So set it as below.
    TCP  1024  - 
    UDP  1024  -
    TCP  80  80
    Any 123  123
    TCP  443  443
    Any  554  554
    TCP  3689  3689
    UDP  5353  5353
    I took a pic of mine, for records, and this is what is in that pic.  You have to enter the self-same number (eg 123 as above) no less than 4 times, this gives the results above.
    On the bottom right, there is a button that says 'apply', so you hit that and it saves this new-fangled custom designed list of reserved ports/addresses for your 'Airplay BT alarm' or whatever you called it.  THEN YOU MUST ASSIGN THIS CREATION OF YOURS TO A DEVICE - THE APPLE TV.
    That's the basics of what I did - I have since restarted the BT HOMEHUB 3 several times, the Ipad 4 several times, the Apple TV has updated its software and has been restarted twice.  STILL AIRPLAY WORKS.
    So, I am reassuringly presented with the Airplay icon whenever I 'upswipe' on my ipad from the bottom of the screen - iOS 7.1 is on my ipad obviously, but that did not change the hit-and-miss of the Airplay icon until I made these mods to the HH3.
    Over to you - try and break my solution please, and let me know if it works for you as well, or not.  All I know is, Real Racing 3 can reliably be brought to bear on the Apple TV thing, and the Airplay icon is now never missing.
    One more point - I think I also set the Apple TV IP address to be static - my ipad has had this situation for some time, along with the 'lease' set to a couple of weeks or something, so it does not try to select a different channel for wifi frequently?  PLUS, I set something in the ipad I think, long ago (did not affect this issue as far as I can see), so that when the ipad 'wakes up' it does not decide to search for a better channel or IP address or something - that caused loads of glitches it seemed, then I found out my BT HH3 was on the end of dodgy phone cable not hi-quality shielded...but hey, that's a different bucket of bolts.
    Good luck and let me know an outcome please, best to all.

  • WLC 7.6.130, Airplay issues.

    Afternoon fella's... 
    I had previously setup the Bonjour gateway and everything seemed to be running with out a hitch, but now not so much.
    In testing, on a single controller, running 7.6.130 code, I can not for the life of me get an iPad to see the AppleTV, some iDevices show an Airplay icon but don't connect, the ipad I'm working with currently does not.  The appletv is on on SSID, while the users are on another, and again this seemed to be ok.
    Now the interesting thing, to me at least, is that on Windows 7 laptop on the same SSID as the iPad, I can connect to the AppleTV just fine with AirParrot 2.
    I've stuck the iPad in the same SSID as the AppleTV as well, and again... nothing.  Is this a known issue in iOS 8.x?  On this iPad I'm running 8.1.2, but other devices have had 8.1.1 and 8.1 on it.
    The AppleTV has the latest download on it.

    Have you tried to Enable "LSS Status" ?
    I use this settings in my MDNS

Maybe you are looking for