Ios 8.3 homescreen top dropshadow
i'm not sure what the proper terminology is for this, but the top-dropshadow on my homescreen disappeared in the ios 8.3 update and there doesn't seem to be anyway to adjust the settings to bring it back. it is now very difficult to read the signal strength, time, and battery life on my light-colored wallpaper. i'd rather not change my wallpaper or photoshop it to include a dropshadow that was there in 8.2 and previous. below is a sample of what i mean, this is the only image i could find online (yes i'm aware it's from an android phone). any help would be appreciated. thanks.
Connecting to another computer using USB would be an option, but syncing to a new computer will erase the content of your phone.
If you can back up the phone to that computer, you can try that by following the steps mentioned in this user help article:
Syncing to a "New" Computer or replacin…
Similar Messages
-
I sent an email from my camera roll. I received notification of the reply on my homescreen (top screen VIP email rollover notification) when I opened my email, the reply wasn't there. How do I retrieve?
-
In the "set" based CatOS SW, there is a command "show top <n>" that will take, by default, a 30 second sampling of the port utilization of all ports on the switch. I am wondering if there is a similiar command in the IOS based switch SW.
Hi,
The Native IOS equivalent to "show top" is available on the Catalyst 6500 platform only. The feature is documented here:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/topn.htm
Release 12.2(18)SXE (for SUP720), 12.2(18)SXF (for SUP720, SUP32 and SUP2) and later releases support the Top N utility
Here is an example of the command in application:
6500-C#collect top 10 counters interface all
TopN collection started.
6500-C#
7w5d: %TOPN_COUNTERS-5-STARTED: TopN collection for report 1 started by
console
7w5d: %TOPN_COUNTERS-5-AVAILABLE: TopN report 1 is available <==Report
ready
6500-C#show top counters interface report
Id Start Time Int N Sort-By Status Owner
1 13:41:20 UTC Tue Feb 7 2006 30 10 util done console
6500-C#show top counters interface report 1
Started By : console
Start Time : 13:41:20 UTC Tue Feb 7 2006
End Time : 13:41:51 UTC Tue Feb 7 2006
Port Type : All
Sort By : util
Interval : 30 seconds
Port Band Util Bytes Packets Broadcast Multicast
In- Buf-
width (Tx + Rx) (Tx + Rx) (Tx + Rx) (Tx + Rx)
err ovfl
Te1/1 10000 0 0 0 0 0 0
0
Fa9/24 100 0 0 0 0 0 0
0
Fa9/23 100 0 0 0 0 0 0
0
Fa9/22 100 0 0 0 0 0 0
0
Fa9/21 100 0 0 0 0 0 0
0
Fa9/20 100 0 0 0 0 0 0
0
Fa9/19 100 0 0 0 0 0 0
0
Fa9/18 100 0 0 0 0 0 0
0
Fa9/17 100 0 0 0 0 0 0
0
Fa9/16 100 0 0 0 0 0 0
0
6500-C#
HTH,
Bobby
*Please rate helpful posts. -
I noticed one bug in iOS App Store
On iOS App Store, in Top Free category in Top Chart option there is a app which is not free.
Hi Sharik Kurikkal,
If you have concerns about how a list may be appearing or the items that are listed on the App Store, you may want to send in feedback about what you are seeing to the iTunes Store; you may find the following page helpful:
Apple - iTunes - Feedback
http://www.apple.com/feedback/itunesapp.html
Regards,
- Brenden -
Hi,
I have a 4510R+E with dual sup7-e. It's set up as SSO.
I'm planning to upgrade IOS to the latest version, which is 3.3.1.151-1.SG1, using ISSU.
One thing that bothers me is the config register is set to 0x2101.
I've typed in 0x2102 but it says "Configuration register is 0x2101 (will be 0x2102 at next reload).
So I put in 'redundancy peer reload' command to see whether standby supervisor comes up as 0x2101 but it didn't.
Do I have to commit 'redundancy reload shelf' to get the chassis to 0x2102 so it can power cycle?
I've tried once to upgrade the IOS using old method, setting boot system command but it didn't work.
Can anyone clarify on this one please?
Regards,
JohnOne thing that bothers me is the config register is set to 0x2101.
For unknown reasons, the 4500 BU started shipping out Sup7/8 line cards with config-registry value of 0x2101.
No need to be alarmed. There is a "silver lining" to this settings. Let me explain:
Line cards, for the 6500 and 4500, with the recommended value of 0x2102 is a double-edged-sword. If you upgrade the IOS only but failed to change the boot variable string, the next reboot the chassis will either boot the old IOS or boot into ROMmon (if the old IOS was deleted). The line cards for the 6500 and 4500 didn't have the "smarts" to load the first available IOS, similar to Catalyst 2K and 3K switches, when config-registry value is set to 0x2102.
Now enter the value of 0x2101. The last octet value of "01" basically instructs the line card to boot the first applicable IOS found in the boot flash. With this value, all you need to validate is the new IOS is located on top of the old IOS.
I hope this makes sense. -
Why can't I get list view in calendar?
I can't get List View any longer in Calendar on my iPhone. Why?
IF you are running 8.x iOS then on the top right side are three icons - three bulleted horizontal lines, search and then a Plus sign
If you click on the three horizontal line icon you will see the list
Which iOS are you on? -
ABAP Routine code for the below logic
Hello BW Experts ,
I need to write a complex ABAP routine in BW .
Following is the detail explaination .
Can anyone tell me the ABAP code for the below logic?
It would be a greate help as I am unable to do this
since last two days.
WBS Elements are maintained at IOS and Warranty levels in R/3 side.
The IOS WBS is a top level of WBS element and below that the Warranty WBS level.
The IOS and Warranty WBS elements can be differentiated by means of priority field.
When priority = i , WBS Element is known as IOS Level WBS Element and
When priority = Y the WBS element is known as Warranty WBS element.
The Equipment Number is maintained compulsorily at IOS Level WBS elements only.
It is not maintained at Warranty WBS Element.
But the Cost is maintained at Warranty WBS Elements.
In BW I need all Warranty WBS ( priority = Y) along with their cost figures and Equipment Numbers.
But as the Equipment Number is not maintained compulsorily at Warranty WBS level we have asked to
Copy it from IOS WBS ( priority = i ) and assign it to Warranty WBS level ( priority = Y ).
So I have included the Equipment Number in the ODS and in update rules I need to write the routine for it as
per the above logic.
The Equipment Number is coming from Master data of WBS Element.
The WBS element master data we are loading in BW .
Also the same WBS Element transaction data is coming from the transaction data data source in BW.
Following fields / infoobjects and the table names in BW :
1. Equipment Number : /BIC/ZEQUIPMNT and table name /BIC/MZWBS_ELEM.
2. WBS Element : ZWBS_ELEM is coming from transaction data data source as well as master data.
In ODS update rules it is coming from transaction data data source Comm_structure-ZWBS_ELEM.
Also we are loading separetly the master data for ZWBS_ELEM.
The ZEQUIPMNT is an attribute of ZWBS_ELEM.
3. Priority : PRIORITY and table name /BIC/MZWBS_ELEM.
The info object name for Priority is 0Priority but in master data table /BIC/MZWBS_ELEM
the field name is PRIORITY.
When PRIORITY = ' i ' then ZWBS_ELEM is at IOS Level
When PRIORITY = ' y ' then ZWBS_ELEM is at Warranty Level.
4. ODS name : /BIC/AZCOST00 and same is table name active data table .
So please tell me the routine Code .
Best Regards ,
Amol.Hi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI -
Filter plugin. Problem after change image depth.
Hi All !
I already wrote filter plugin it work fine but only for image depth 8bit, after i change image depth on 16 or 32 bits I getting error msg box from photoshop.
I try change on 'destination.colBits = 8' or 'destination.colBits = pChannel->depth' or ' (pChannel->bounds.bottom - pChannel->bounds.top) * pChannel->depth;' but all the same.
PixelMemoryDesc destination;
destination.data = data; //*pixel
destination.depth = pChannel->depth;
destination.rowBits = (pChannel->bounds.right - pChannel->bounds.left) * pChannel->depth;
destination.colBits = 8;
destination.bitOffset = 0 ;
Please help someone !
Very Thanks in Advance !
All code below:
// Gauss.cpp
// gauss
// Created by Dmitry Volkov on 30.12.14.
// Copyright (c) 2014 Automatic System Metering. All rights reserved.
#include "Gauss.h"
#include "GaussUI.h"
#include "FilterBigDocument.h"
#include <fstream>
using namespace std;
SPBasicSuite* sSPBasic = NULL;
FilterRecord* gFilterRecord = NULL;
PSChannelPortsSuite1* sPSChannelPortsSuite = NULL;
PSBufferSuite2* sPSBufferSuite64 = NULL;
int16* gResult = NULL;
void DoParameters ();
void DoPrepare ();
void DoStart ();
void DoFinish ();
void DoEffect();
void GaussianBlurEffect(ReadChannelDesc* pChannel, char* data);
void ReadLayerData(ReadChannelDesc* pChannel, char* pLayerData);
void WriteLayerData(ReadChannelDesc* pChannel, char* pLayerData);
DLLExport MACPASCAL void PluginMain(const int16 selector,
FilterRecordPtr filterRecord,
intptr_t * data,
int16 * result)
sSPBasic = filterRecord->sSPBasic;
gFilterRecord = filterRecord;
gResult = result;
try {
if (sSPBasic->AcquireSuite(kPSChannelPortsSuite,
kPSChannelPortsSuiteVersion3,
(const void **)&sPSChannelPortsSuite))
*gResult = errPlugInHostInsufficient;
if (sSPBasic->AcquireSuite( kPSBufferSuite,
kPSBufferSuiteVersion2,
(const void **)&sPSBufferSuite64))
*gResult = errPlugInHostInsufficient;
if (sPSChannelPortsSuite == NULL || sPSBufferSuite64 == NULL)
*result = errPlugInHostInsufficient;
return;
switch (selector)
case filterSelectorParameters:
DoParameters();
break;
case filterSelectorPrepare:
DoPrepare();
break;
case filterSelectorStart:
DoStart();
break;
case filterSelectorFinish:
DoFinish();
break;
catch (...)
if (NULL != result)
*result = -1;
void DoParameters ()
void DoPrepare ()
void DoStart ()
if (*gResult == noErr)
if (doUi())
DoEffect();
void DoFinish ()
#define defColBits 8
void DoEffect()
// Start with the first target composite channel
ReadChannelDesc *pChannel = gFilterRecord->documentInfo->targetCompositeChannels;
// Calculation width and height our filter window
int32 width = pChannel->bounds.right - pChannel->bounds.left;
int32 height = pChannel->bounds.bottom - pChannel->bounds.top;
fstream logFile ("/Volumes/Macintosh Media/GaussLogFile.txt", ios::out);
logFile << endl << "top " << pChannel->bounds.top;
logFile << endl << "bottom " << pChannel->bounds.bottom;
logFile << endl << "left " << pChannel->bounds.left;
logFile << endl << "right " << pChannel->bounds.right;
logFile << endl << "depth " << pChannel->depth;
logFile << endl << "vRes " << gFilterRecord->documentInfo->vResolution;
logFile << endl << "hRes " << gFilterRecord->documentInfo->hResolution;
// Get a buffer to hold each channel as we process. Note we can using standart malloc(size_t) or operator new(size_t)
// functions, but Adobe recommend sPSBufferSuite64->New() for memory allocation
char *pLayerData = sPSBufferSuite64->New(NULL, width*height*pChannel->depth/8);
if (pLayerData == NULL)
return;
// we may have a multichannel document
if (pChannel == NULL)
pChannel = gFilterRecord->documentInfo->alphaChannels;
// Loop through each of the channels
while (pChannel != NULL && *gResult == noErr)
ReadLayerData(pChannel, pLayerData);
GaussianBlurEffect(pChannel, pLayerData);
WriteLayerData(pChannel, pLayerData);
// off to the next channel
pChannel = pChannel->next;
pChannel = gFilterRecord->documentInfo->targetTransparency;
// Delete pLayerData
sPSBufferSuite64->Dispose((char**)&pLayerData);
void GaussianBlurEffect(ReadChannelDesc* pChannel, char *data)
// Make sure Photoshop supports the Gaussian Blur operation
Boolean supported;
if (sPSChannelPortsSuite->SupportsOperation(PSChannelPortGaussianBlurFilter,
&supported))
return;
if (!supported)
return;
// Set up a local rect for the size of our port
VRect writeRect = pChannel->bounds;
PIChannelPort inPort, outPort;
// Photoshop will make us a new port and manage the memory for us
if (sPSChannelPortsSuite->New(&inPort,
&writeRect,
pChannel->depth,
true))
return;
if (sPSChannelPortsSuite->New(&outPort,
&writeRect,
pChannel->depth,
true))
return;
// Set up a PixelMemoryDesc to tell how our channel data is layed out
PixelMemoryDesc destination;
destination.data = data; //*pixel
destination.depth = pChannel->depth;
destination.rowBits = (pChannel->bounds.right - pChannel->bounds.left) * pChannel->depth;
destination.colBits = defColBits;
destination.bitOffset = 0 ;
// Write the current effect we have into this port
if (sPSChannelPortsSuite->WritePixelsToBaseLevel(inPort,
&writeRect,
&destination))
return;
// Set up the paramaters for the Gaussian Blur
PSGaussianBlurParameters gbp;
int inRadius = 1;
Fixed what = inRadius << 16;
gbp.radius = what;
gbp.padding = -1;
sPSChannelPortsSuite->ApplyOperation(PSChannelPortGaussianBlurFilter,
inPort,
outPort,
NULL,
(void*)&gbp,
&writeRect);
if (sPSChannelPortsSuite->ReadPixelsFromLevel(outPort,
0,
&writeRect,
&destination))
return;
// Delete the temp port in use
sPSChannelPortsSuite->Dispose(&inPort);
sPSChannelPortsSuite->Dispose(&outPort);
void ReadLayerData(ReadChannelDesc *pChannel, char *pLayerData)
// Make sure there is something for me to read from
Boolean canRead;
if (pChannel == NULL)
canRead = false;
else if (pChannel->port == NULL)
canRead = false;
else if (sPSChannelPortsSuite->CanRead(pChannel->port, &canRead))
// this function should not error, tell the host accordingly
*gResult = errPlugInHostInsufficient;
return;
// if everything is still ok we will continue
if (!canRead || pLayerData == NULL)
return;
// some local variables to play with
VRect readRect = pChannel->bounds;
PixelMemoryDesc destination;
// set up the PixelMemoryDesc
destination.data = pLayerData;
destination.depth = pChannel->depth;
destination.rowBits = pChannel->depth * (readRect.right - readRect.left);
destination.colBits = defColBits;
destination.bitOffset = 0 ;
// Read this data into our buffer, you could check the read_rect to see if
// you got everything you desired
if (sPSChannelPortsSuite->ReadPixelsFromLevel(
pChannel->port,
0,
&readRect,
&destination))
*gResult = errPlugInHostInsufficient;
return;
void WriteLayerData(ReadChannelDesc *pChannel, char *pLayerData)
Boolean canWrite = true;
if (pChannel == NULL || pLayerData == NULL)
canWrite = false;
else if (pChannel->writePort == NULL)
canWrite = false;
else if (sPSChannelPortsSuite->CanWrite(pChannel->writePort, &canWrite))
*gResult = errPlugInHostInsufficient;
return;
if (!canWrite)
return;
VRect writeRect = pChannel->bounds;
PixelMemoryDesc destination;
destination.data = pLayerData;
destination.depth = pChannel->depth;
destination.rowBits = pChannel->depth * (writeRect.right - writeRect.left); //HSIZE * pChannel->depth * gXFactor*2;
destination.colBits = defColBits;
destination.bitOffset = 0 ;
if (sPSChannelPortsSuite->WritePixelsToBaseLevel(
pChannel->writePort,
&writeRect,
&destination))
*gResult = errPlugInHostInsufficient;
return;Have you reviewed your code vs the Dissolve example? It is enabled for other bit depths as well.
-
How do I get back to email summary screen from a message
I can't get out of the edit mode in my messages. I can not get back to a message summary screen no matter what I do. The options across the bottom of the screen are reply, trash, folder, flag and reply.
Only since iOS 6 upgradeOn the top it doesnt say ALL Inboxes or iCloud or whatever mail box your in?
If not, close the app, double click the home button, swipe over and kill the Mail App..Then open mail app again. -
The version of app world on this phone said it needed upgrading before I could use it, I followed the link to the upgrade but it gave me an error message. Ive tried to google app world download & I get another error message, I have tried to download it thru my computer & it says this device is not supported for usb downloads, I have entered my email address & got an email with a link which I have followed and got another error message. You get the idea.
Have deleted the app thru options, device, application management then tried to access the latest version using browser but it keeps sending an error message.
I have wifi & have been using that to do it.
I have a torch 9800.
I am losing the will to live.
Thanks.
Solved!
Go to Solution.Personally, I'd call them.
Let me ask, at your homescreen top line, do you see the BlackBerry logo?
On your Manage Connections screen, click on the Services Status. What is the status of the BlackBerry Internet Service?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
If I already have iWork suite on my iPad, do I need to buy another for my MacBook Pro?
If I already have iWork suite on my iPad, do I need to buy another for my MacBook Pro, can i transfer to my new acbook pro?
The Mac version is a separate version from the iOS version and has top be paid for separately.
If you buy it from the Mac App Store (MAS) however it is quite cheap and can be installed on all your computers that use the same Apple ID.
Peter -
How do I send pictures from my IPAD?
How do I send pictures or videos from my IPAD?
If you start in the Photos app in thumbnail view then you should be able to use Edit button (the icon of the box with the arrow coming out of it on iOS 5) at the top right of the screen to select up to 5 photos and attach them to an email (or to Facebook, Messages) via the Share button top left.
On iOS 6 you can also select photos directly from an email in the Mail app by pressing and holding in the body of the email, and after a second or two you should get a magnifying symbol appear - release the screen and a popup should show with one option being 'Insert Photo or Video' -
HT201304 How safe is Internet on ipad2?
How secure is ipad2 for Internet surfing, do I need Norton or similar?
The iPad iOS is built on top of UNIX, a very secure system. There is no way anything could 'infect' the iPad - it's all locked down. You'll be safe =)
-
Hi,
I did an upgrade of 9300 to OS6. Its running fine except certain annoying bugs. Can someone confirms these as universal bugs or is it just me. 1. The homescreen top status menu pop up hangs up when I scroll below the alarm.
2. In the all menu tray, I am unable to move all my emails to a newlycreated folder by me.
3. There is duplication of menu objects sometimes.
Solved!
Go to Solution.I two more. The text/SMS history sometimes refuses to scroll up, and then the conversation locks up. The only way to continue talking is go back in, then back out. Once this happens though, you cannot view your history past a certain point and the only resolution is to delete the conversation and start new. The second error, is if the user types a word that is not in the phone's dictionary and it underlines it as 'incorrect' and you click on the word marked incorrect, instead of displaying suggestions it will display an error message saying "Invalid input. The device will now reset.' This is happening on BOTH of the devices in our possession. They should fix this among the other issues listed on this topic.
-
Regionalization Reset - Photosmart B110
Recently moved to Europe from the Middle East, with my HP Photosmart e-Wireless All-in-One B110b. Old cartridges (HP178) ran out, but when I put the European equivalents in (HP364) I got an "Incompatible Ink" message.
Contacted HP Online Chat to request a "Regionalization Reset". First, they insisted that I print a "10-tap test" with the old cartridges (impossible given they were empty). Then, they emailed me to say that Region Reset wasn't possible on the B110.
Wrong! When I spoke to HP UK - where I bought the cartridges, even though I live in France - by phone (0844 369 0369) they said that, provided I still had the old cartridges (even if they wouldn't print) they could get the information required from the printer support menu.
With their guidance, entered the support menu using the following sequence on the printer homescreen (Top Left-Top Right-Top Left-Top Left). Then provided the following info from various menus: printer serial number, page count, ink cartridge serial nos (black, cyan, yellow, magenta), gather/scramble scheme. They then gave me some codes to enter into a special menu. Success!
Many thanks to Bob Headrick (on this forum) and to Peter in Newcastle (HP Support UK) for all their help.
This question was solved.
View Solution.I am glad your issue was resolved .
For others with this issue you will need to Contact HP to request a "Regionalization Reset". I suggest a phone call rather than using the chat function. There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work. HP's web page on the subject is here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Maybe you are looking for
-
I have just been listening to an album on my iphone through the cloud, and noticed that the album was playing in an odd order, and whe I tried to adjust to play the album from the beginning again it still took me to what seemed a random track next, a
-
How do I restore gid after installing Mavericks?
Hi folks, quick question for you all. Before installing Mavericks (I was running Mountain Lion), I was in the following situation: I was user myname with uid=501, and (besides other) I was member of a group called myname, which had gid=501. Now, afte
-
Error in Table Function (PIPELINE)
I executed the following: CREATE OR REPLACE TYPE TYPE_BANK_STMT_DT_RANGE as object COL1 VARCHAR2(200), COL2 VARCHAR2(200), COL3 VARCHAR2(200), COL4 VARCHAR2(200), COL5 VARCHAR2(200), COL6 VARCHAR2(200), COL7 VARCHAR2(200), COL8 VARCHAR2(200), COL9 VA
-
KM Doc Iviews do not display while using the FQDN
Hi All, We have recently migrated the data from EP 6.0 server to EP 7.0 server. We have External Facing Portal sites in Arabic, English and French. When I use the FQDN to access the arabic sites it fails to display the KM doc Iviews. This works fine
-
Why are images on page blinking after the OSX 10.9.3 update
Why are images on page blinking after OSX 10.9.3 update on 5/21/14?