IOS 8.3 is not downloading/updating

My iPad 2 is not downloading iOS 8.3 (I've tried 3 different times). Each time I've tried, it becomes a black screen that alternates with a black screen with white-apple logo.....for HOURS. A couple days ago when I tried, it was over 24 hours that it kept alternating between the two screens, and while it's doing that, I cannot turn it on at all (even if I try to hold the power and home buttons down for 10+ seconds). I've tried the update with it plugged into the wall in 2 different places, unplugged, and now plugged into the computer connected to iTunes. That's not making any difference. Each time it does come back on, it's not updated to iOS 8.3 and still has the red 1 on the Settings app to update.
How long should the iOS update take?
If it's alternating between the totally-black screen and the black screen with apple logo, does that mean it's updating that entire time??
Please help! I want to actually be able to use my iPad.

 

Similar Messages

  • Since my update to IOS 6 I can not download Apps. What do I do!!??

    Since my update to IOS 6 I can not download Any Apps, because I can not see te info on the next screen when I chose an app... What do I do!!??

    It HAS to be hardware..
    I made the appointment, thank you.
    I consistently close all apps, keep my brightness down, keep wifi off when not in use, and location services. Reset my phone and still the battery drains so fast!
    It appears to be messaging, and Facebook apps, and safari that are the leading cause..
    If I send maybe 10 texts, I'll easily lose 4-8 % battery. I literally watch it drain in front of my eyes.
    Roughly a minute of Facebook, safari, or mail consumes 1-2%.
    That is faulty hardware, or software..
    Either way it's apples fault. My phone is mint! Never been out of this otter box except to wipe dust off and when I charge it..
    I charge regularly. Let it die down before charging, and let it almost completely die then fully charge it once a month too.
    I hope apple repairs my battery, or software

  • IPad App Store not downloading updated apps

    I have an iPad 3 64GB that has been updated to iOS 8. In the last two days, the App Store will not download updated apps. It shows them with a red number, but when I click on Update, I get the circle with a square in the middle but then nothing proceeds. If I go to the individual app, it says "waiting…" but if I click it, it does not change to "paused" as it used to when waiting was shown.
    My iPhone 5S is not having a problem, nor is iTunes on my computer.
    Sometimes, if I sync the iPad with iTunes, the updated apps will copy over to the iPad, but not every time.
    I have done a forced restart on the iPad and have also done a Reset All Settings under the General setting.
    It appears that something has gone wrong with the App Store app. Does anyone have a suggestion as to how to fix this short of restoring the iPad to new status and reinstalling everything?

    Hi,
    Try deleting the apps with the issue from iTunes, and then download and update them again.
    This article: http://support.apple.com/kb/TS1702 provides additional tips for troubleshooting issues with applications.
    -Jason

  • IOS 8.1 Does Not Download All iCloud Mail/ Keeps Cache?

    Hello,
    I have setup and enabled an iCloud e-mail account on all of my devices and was successfully able to use the Mail app in Mac OS X Yosemite to copy mail from my Yahoo! inbox to my iCloud inbox.  All e-mail copied from Yahoo! Mail appears in the OS X Yosemite Mail app as well as in the iCloud.com site, however, my iPad Air 2 and iPhone 5 both running iOS 8.1 does not download all of the mail from iCloud.  I have tried the following on both iOS 8.1 devices with no success.
    - Disable iCloud mail and re-enable
    - Sign completely out of iCloud and sign in again, then reconfigure all iCloud services including mail
    The result of both steps is that the incomplete list of e-mail in the iCloud inbox just reappears in the Mail app instead of downloading from iCloud again.  It looks like the incomplete list of e-mail is stored on the iOS device and signing out of or disabling iCloud mail just hides it; re-enabling or signing in merely shows it again.  This appears to work differently than my Yahoo! Mail configuration where if I sign out of or delete the Yahoo! account and reconfigure, iOS downloads a fresh copy of all e-mail in the inbox and all other folders.  Here are my two questions:
    - How do I get my iPhone and iPad Air 2 to download ALL e-mail from my iCloud mail account?
    - Are my suspicions true? Does iOS actually store a cached copy of iCloud mail on the device when the service is disabled and just "redisplays" it when re-enabled?
    Thanks!

    I had the same problem. My iCloud it's a mess since the iOS 8.1 update.
    Probably your iCloud isn't working too.

  • I can not download updates

    I can not download updates , via some time of downloading ,it quits and I see inscription saying no one of updates cannot be downloaded ,there is any mistake or manipulation might be, try download later. And so 10 times of trials to download (Air Port,iTunes,something else )
    What can I do?
    Macbook pro 2011 Lion.
    Thank you for your time

    In Console I have got this report . What can I do ?
    Feb 23 05:30:25 TIA Software Update[2181]: JS: 10.7.5
    Feb 23 05:30:26: --- last message repeated 1 time ---
    Feb 23 05:30:26 TIA Software Update[2181]: JS: Firmware is up to date.
    Feb 23 05:30:27: --- last message repeated 1 time ---
    Feb 23 05:30:27 TIA Software Update[2181]: JS: model = MacBookPro8,1
    Feb 23 05:30:27 TIA Software Update[2181]: JS: 10.7.5
    Feb 23 05:30:42: --- last message repeated 4 times ---
    Feb 23 05:30:42 TIA Software Update[2180]: Acquired Lock: 501, 2181, 0
    Feb 23 05:30:42 TIA Software Update[2180]: Releasing Lock: 501, 2181, 0
    Feb 23 05:30:45 TIA Software Update[2181]: Calculated need 1867.890 MB; 318269.399 MB free; 318269.399 MB available with MTM reclaim
    Feb 23 05:30:46 TIA Software Update[2180]: Acquired Lock: 501, 2181, 0
    Feb 23 05:31:57 TIA Software Update[2181]: 041-7212: Failed post-download size check for package "AirPortUtility.pkg": expected 21000445, got 22000498
    Feb 23 05:32:38 TIA Software Update[2181]: 041-8574: Failed post-download size check for package "JavaEssentials.pkg": expected 15491032, got 15533990
    Feb 23 05:32:53 TIA Software Update[2181]: 041-9609: Failed post-download size check for package "RAWCameraUpdate4.pkg": expected 5098149, got 5022418
    Feb 23 05:33:21 TIA Software Update[2181]: zzzz041-9792: Failed post-download size check for package "MobileDevice.pkg": expected 11171841, got 9361776
    Feb 23 05:33:21 TIA Software Update[2180]: Releasing Lock: 501, 2181, 0
    Feb 23 05:33:21 TIA Software Update[2181]: Error: Не удалось завершить операцию. (SUSessionErrorDomain, ошибка 3) (SUSessionErrorDomain code 3)
    Feb 23 05:33:21 TIA Software Update[2181]: Error: Не удалось завершить операцию. (SUSessionErrorDomain, ошибка 4) (SUSessionErrorDomain code 4)
    Feb 23 05:33:21: --- last message repeated 1 time ---
    Feb 23 05:33:21 TIA Software Update[2181]: Error: Не удалось завершить операцию. (SUSessionErrorDomain, ошибка 3) (SUSessionErrorDomain code 3)

  • Can not download updates for photoshop 7. error 21:120

    can not download updates for photoshop 7. error 21:120

    We cannot know. You need to provide exact system info and the exact error text. And it sounds like you are actually referring to PS Elements 7, right?
    Mylenium

  • Flash player will not download update

    I am working on OS X 10.8.5 and flashplayer will not download updates because of failure to unzip metafile file. My current version is out of date and no longer works at all. I have seen post from a Yuko C. that may have some answers.

    I would request you to post your Query on Flash Player Forums community.
    Here is the below mentioned link
    http://forums.adobe.com/community/flashplayer
    Thanks!
    Eshant

  • HT1222 My software update iOS 6.1 is not downloading and is holding up all other downloads. How can I fix

    Hi my iOS 6.1 software I'd not downloading. It is holding up all other downloads. It tells me 1 min left then tells me 3 hours left. Any ideas?

    Does it say Waiting?
    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • I have a "Security Unlocked" HTC 8x that will not download updates. Is there a way to push updates to it?

    So I destroyed the LCD on my first 8x and had to get a replacement. I bought another 8x on ebay and it turns out that it is "Security Unlocked". I apparently have full access to the bootloader and can enter all sorts of fun modes by pressing buttons
    during bootup. But I am unable to install any OTA updates to the phone. When I search for updates on the phone it tells me that my device is up to date (my current version is 8.0.900.568). If I attempt to install language packs, I just get an error "Couldn't
    download. Tap to retry".
    When I boot to "bootloader mode", which displays lots of numbers and bar codes, the indications are that this phone was shipped from HTC this way and was not hacked by a previous owner. I suspect the ebay seller got it like this new. The ebay seller
    has not responded to any of my messages.
    HTC support has been less than helpful (though the support agent did try his best to help me out) and Windows Phone support believed I was referring to "Developer unlocked" and said I would probably have better luck here. I have registered the
    phone with Visual Studio and have so far been unsuccessful at finding any way to push updates to the phone directly, but I'm not sure at all where to look. Right now I just have VS Express with the WP SDK installed, but I can install VS 2013 Pro on here if
    I need to.
    Since it is security unlocked, I supposedly have access to all sorts of gooey parts of the phone, including potentially the OS partition. I have the technical skill and ability to perform whatever official or unofficial or unsupported tasks might be involved
    in getting this thing to work like a normal phone. I just don't have the esoteric knowledge to do so.
    So the original question - are there any hacks I can do to make it function like a regular phone and download updates OTA? (To be clear, I am not trying to hack the phone, I'm trying to UNhack the phone.) Is there a way to push updates with Visual Studio
    or in some other way?

    I am sorry that you don't find the answer to be correct. In THIS forum, telling you that you are in the wrong forum, and suggesting where to post for correct answers, or indeed any support, IS the answer.
    I'm also sorry that you purchased a phone that you are having trouble with. If the vendor cannot help you (HTC), and the eBay seller cannot help you, then you really do need to either follow up with the forums Ken suggests, or the HTC forum, or with eBay.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog:http://unlockpowershell.wordpress.com
    My Book:Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Please help! I can not Download Updates (invalid serial)

    Hi everyone,
    I have FCP STUDIO 5.1 and FCP STUDIO 2 (upgrade), both are original full pack that I have been using for a while. Now I just bought a new computer and stop using the old one.
    I went for download update here:
    http://www.apple.com/finalcutstudio/download/
    And it tells me to key in serial number of the new pack, I did. Then it tells me to key in the serial of the old pack, and it's not working when I keyed serial number of FCP STUDIO 5.1 in. I am stuck in the middle of an important project here and I don't know what happened.
    Why did it say invalid serial number while my pack is 100% original and able to use for the past 2 years before got the upgrade version? What should I do? I really need to get back to work, I can't be late.
    Any help from Apple I would appreciate alot!
    Thank you.
    My email: [email protected]
    Message was edited by: boneho

    My standard advice in these circumstances is to be sure you're not confusing letters when you type in the serial.
    It is very easy to confuse "O" (upper case o) with "0" (zero) and "I" (upper case i) with "l" (lower case L) or even "1" (one).
    It might be worth your while trying to enter the number again bearing this in mind!
    Frank

  • JWS not downloading updated files first time

    We are experiencing a problem where JWS does not download the modified files when the application is launched the first time after the jar files were updated. When user launches it again, it gets the updates.
    This seems to happen mostly for users in remote locations (though not for all such users). For local users the frequency is much less.
    Any thoughts?
    Thanks,
    Raman.

    If the application has the offline-allowed specified,
    javaws has a timeout mechinism when checking for updates before launching an app. (i believe it's 1+1/2 seconds). If javaws cannot determine before the timeout if an update is needed, (and offline-allowed is specified) it will run the cached version, and continue checking in the background.
    Then when you run next time, the background checking will by then have determined an update is avail, and you will have to download before launching.
    /Dietz

  • WSUS in Windows Server 2012 R2 is not downloading update files.

    I'm not using Proxy server and this is the only WSUS server in our environment and update source is to sync from Microsoft Update site.
    Synchronization completes successfully and every update files is not downloading. When I look at the download status from the main page, it said it downloaded, but when I look at the files from updates folder, it said failed to download.
    I'm getting following error messages:
    Content file download failed.
    Reason: The server does not support the necessary HTTP protocol. Background Intelligent Transfer Service (BITS) requires that the server support the Range protocol header.
    Source File: /c/msdownload/update/software/crup/2013/12/windows8.1-kb2903939-x64_a8ae5dc28899c892b46c9aa9c8aa71e2d3961a79.cab
    Destination File: e:\wsus\WsusContent\79\A8AE5DC28899C892B46C9AA9C8AA71E2D3961A79.cab
    John

    Hi,
    This is most likely a problem with a proxy server or firewall. Since you don’t have a proxy server, then firewall could be the culprit.
    Error message when you try to download a file by using the Background Intelligent Transfer Service: "Content file download failed"
    http://support.microsoft.com/kb/922330
    Make sure your firewall support HTTP 1.1 range requests. If it still doesn’t help, try the following workaround:
    If you are unable resolve this issue from the proxy/firewall side, then try these steps as a workaround on the WSUS server,
    Set BitsDownloadPriorityForeground=1 using osql.exe on WSUS SQL instance.
    net stop WSUSservice
    CD "%ProgramFiles%\Update Services\tools\osql"
    osql.exe -S <SQL instance name> -E -b -n -Q "USE SUSDB update tbConfigurationC set BitsDownloadPriorityForeground=1"
    net start WSUSservice
    Original post in this
    blog.
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Hope this helps.

  • I can not download updates for Adobe camera Raw. I get the message --- update server is not responding

    I can not download an Adobe camera raw update.  I keep getting the message, the update server is not responding ---Try again.  The server may be offline temporarily off line.

    Which operating system?
    If windows, try this:
    Error "Update server not responding" | CS4 Updater, AAM | Windows

  • Can not download update 10.1.3. Please help!

    I have tried to download update 10.1.3 three times. Each time failed and an error message appeared saying "insufficient privileges". I tried to correct this by folloing your FAQ solution for this error message, but it still is not working. Please help!

    Install 10.1.4 from http://get.adobe.com/reader/enterprise
    There is a difference between between unable to install or download. The above link should allow you to download. If you still cannot try to do so from a different user.

  • Can not download update Vision Assistant Version 7.1

    i really can not directly download update Vision Assistant Version 7.1 from this site http://digital.ni.com/softlib.nsf/websearch/AF2B1355764E96C786256E9A00544EB9?opendocument&node=13206...
    Is there any altenative website that easily can download the update?
    thanks

    finally,i can directly download that update Vision Assistant Version 7.1 from this site http://digital.ni.com/softlib.nsf/websearch/AF2B1355764E96C786256E9A00544EB9?opendocument&node=13206...
    unfortunately its not version 7.1..but 7.0.1 !!!...
    i need version Vision Assistant 7.1 bcos  i need to install  usb_installer_setup.exe (usb webcam)
    im using labview 7.1..
    plz help me..

Maybe you are looking for