IOS 8/8.0.2 reboots during call and then comes back

I have seen issues with IOS 8 and 8.0.2 on both an iPhone 5 and an iPhone 6 where I am on a conference call, and the phone goes dead to the white screen with the black apple,  then 30 seconds later, the phone comes back on with the previous call still connected.  Has anyone else seen this issue?   I have seen this issue at least once a day since upgrading to IOS 8 on my iPhone 5 and my receipt of my iPhone 6 and then subsequently on IOS 8.0.2

This very same thing everyone here has posted about happened to me this very evening. I only found this post by googling around as there's not too much.
I have a 5c, my friend has a 5s. Both of us running 8.02. During a call, first my phone cut out like the call dropped and I see the Apple logo on screen like its rebooting. I'm like "what the..." but before I can even say the word, my phone is back at the home screen and my call resumes. Even the call time counter kept counting like the call never dropped. But I could not here my friend though he said he could still hear me.
The strange part of this is within a couple of minutes the exact same thing happened to my friend on his phone during our same call. Apple logo, screen reboot, he can't hear me for like 5 seconds and then all is normal again. He suspects the NSA; I say loose bolts in the plumbing.
Man, I hope this 8.1 update fixes this. And Safari, which runs awful. And the Camera Roll. And the...

Similar Messages

  • ZTE Open C reboots during calls

    The phone reboots during calls. OS version 1.3, latest according to ZTE.
    Thing is, only when it is set to use 3G. But if I set to 2G the audio is absolutely terrible.
    Both when using 2G and 3G sometimes the calls get cut-off on the receiver phone. I can hear the other person talking but the other person doesn't hear anything. This is another issue.
    What can I do? The phone was bought from Ebay on September 2014.
    Problem didn't start now, ZTE Ebay support said the issue was a SIM one. I recently changed to 3G because the noises in 2G are almost unbearable.

    ''Ralph Daub [[#answer-713346|said]]''
    <blockquote>
    Hi Falconet,
    I understand you are experiencing rebooting and call quality issues on your ZTE Open C device.
    Since ZTE is responsible for the Firefox OS build specific to your device, I would suggest following their advice.
    You may be able to request a new SIM card for your device by contacting your carrier support.
    I hope this resolves your issue. Please let us know if you have any other questions about your Firefox OS device.
    Thanks,
    - Ralph
    </blockquote>
    Hi,
    What ZTE meant was changing carriers not just sim card. I can't do that for another 1.5 years. The reason they said is because the phone seemed fine for a while when using another carrier. Sadly, the SIM is fine since another SIM card from the same carrier does the same. Both are working fine on Android Phones.

  • Since installing iOS 6, I have had problems receiving calls and messages. Calls go straight to answerphone and messages do not appear until I switch off and on again. I have also installed iOS 6.1.1

    Since installing iOS 6, I have had problems receiving calls and messages. Calls go straight to answerphone and messages do not appear until I switch off and on again. I have also installed iOS 6.1.1

    Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

  • My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.

    My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.  Because of this it makes it tough to put my phone on speaker or type in my v-mail password.

    I've been trying to find a common denominator. It happens inconsistently. It never happened before the Denim update. When it does occur, the screen goes black immediately upon answering the call and doesn't come back until the call is ended by the calling party.
    I thought it might be the proximity sensor, but when it's working normally I can see the screen go dark when it's at my ear and comes back when I take it away (tried it multiple times). I had Gestures Beta installed. I wondered if that could have an affect so I uninstalled it, but that didn't make any difference. I'm still stumped by the inconsistency. I haven't reset my phone as I didn't really want to go through that...

  • HT201412 so today my ipod touch 4 gen ios 5.1.1 stopped responding to touch and then it got really hot and died so i try to charge it... nothing happens. what should i do?

    so today my ipod touch 4 gen ios 5.1.1 stopped responding to touch and then it got really hot and died so i try to charge it... nothing happens. what should i do?

    retrojustin wrote:
    ...and then it got really hot and died so i try to charge it... nothing happens. what should i do?
    Call Apple.

  • I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen.  What am I doing wrong?

    I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen.  What am I doing wrong?

    Hi RWD2,
    Welcome to the Support Communities!
    To resolve your issue with Facetime freezing when you end a call, I would try the first three steps in the article below. 
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If you are using Wi-Fi, it may be helpful to try these troubleshooting steps as well:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398?viewlocale=en_US
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    I hope this information helps ....
    Have a great day!
    - Judy

  • SIRI finds the correct number, makes the call and then immediately disconnects.

    If I use Siri to make a call the system usually finds the correct number then makes the call and then immediately disconnects. This is really frustrating.
    I have a 2010 Toyota Landcruiser Sahara with a Pioneer system with built-in bluetooth. 
    Does anyone know how to fix this? 
    BTW the phone works well with a hyundai i30.
    I never had this problem with my Blackberry

    That's interesting. Try saying "Call Mobile" instead of just "Mobile". If you're still having trouble, try hard booting your phone holding down Power + Home until the device reboots.

  • My Macbook is not working properly, I went to a Genius Bar appointment, they were not helpful at all and just told me to go off and reboot my Mac and then restore via TimeMachine. I dont know how to do this. I am extremely displeased with Apple, help me?

    My late 2011 Macbook Pro is not working properly it is very slow and extremely painful to use, I went to a Genius Bar appointment, they were not helpful at all and just told me to go off and reboot my Mac and then restore via TimeMachine. I dont know how to do this. I am extremely displeased with Apple at the moment, can someone please help me?

    Your problem description is generalized and non-specific. I would make another appointment at the Apple store and insist they help you execute their suggested fixes.
    Incidentally, if you search this site, Apple has excellent articles re: restoring a system.
    Barry

  • When i sign out of imessage, and then sign back in, all the messages i received during my time away, are not there instantly. help?

    when i sign out of imessage, and then sign back in, all the messages i received during my time away, are not there instantly after i sign back in. help?

    hi,
    Mac, iPhone, iPad, iPod Touch ?
    Do they appear eventually ?
    The iMessages are "pushed" to the devices which means there can be small delays between the server recognising the device went Off Line and coming back.
    10:19 pm      Thursday; July 10, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • My sound keeps turning off and then gonas back on and also its ending my calls when i got full sigal

    Hi 
    could you please help me as my sound keeps turning off and then gonas back on and also its ending my calls when i got full sigal

    Hi john00000001,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Cheers,
    - Judy

  • When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press home or lock buttons firs

    When I am on a call and I come to hang up, the phone which when to my ear has a black screen, starts to light up so I can see and click the hang up button, but it then blacks out intermittently and in the brief moments it is lit up, the hang up button doesn't work unless I press the home or lock buttons first

    Wow- thanks Jim! I removed the case and voila... it worked. Knock on wood that you solved my problem with such an incredibly simple solution. I'll find out where this proximity sensor is and make sure my case does not interfere with it.
    Thanks so much.
    Annick

  • HT204380 I have done all the above. I am in Germany using an iPad 2, trying to call an iPad 2 in the UK. My IPad goes through the call and then times out. I have been on the phone to the receiver at the time so know they had their iPad on.

    I have done all the above. I am in Germany using an iPad 2, trying to call an iPad 2 in the UK. My IPad goes through the call and then times out. I have been on the phone to the receiver at the time so know they had their iPad on.

    What do you mean that you can't "call" an iPad in the UK??  That doesn't particularly make sense.  You can email to an iPad or text them, but the iPad is not a phone, so how do you expect to "call" them??
    Hope this helps

  • Why do some iOS 7 apps lose their state when I switch to another app and then switch back?

    When I switch from an app like Safari, the New York Times, Facebook, or Google+ Hangouts to some other app and then switch back, the first app takes me to its initial page, not to my place in the document I was reading. The Kindle app, on the other hand, seems to access the network but still manages to restore the page I was reading before the switch. I don't think my apps lost their place in earlier versions of iOS. Have other people noticed this? Is there something different in how iOS 7 switches context that requires apps to save their state differently than before? This problem is an annoying time-waster!

    Thanks for explaining how app's loss of state can happen. However, I'm sure that the behavior of the four apps I mentioned is much worse than just a few months ago. Something must have changed, and iOS 7 is the main difference. The Kindle app behaves as it used to, but the others do not. Maybe I should note the problem in reviews of the apps themselves in the App Store -- and down rate the apps.

  • Update to 10.5.5, reboot, system take forever to come back?

    I've been working on getting our server upgraded from 10.4.11 to 10.5.5 and today I was going to give it another go. I have just completed the setup and the first thing I did was upgrade the OS from 10.5.4 to 10.5.5 and reboot, the system is right now in a state I have found it in every previous time I've done this:
    The screen shows the bluish space image but no login screen and the drives are busy working on something. It does this for a long time. In the past I forced the system down then rebooted and it came right up but today I thought I'd see how long it would take to come out of this funk.
    Here's a visual of what my system is doing, it has been in this current state now for more than 20 minutes... http://www.automaticduck.com/screenshots/SERVERafter_10.5.5_updateweb.mov
    I haven't found any posts describing this behavior. Is this kinda normal?

    davidh wrote:
    I always, emphatically recommend a migration over an upgrade install, when moving from any version of Mac OS X to a newer one, especially with OS X Server.
    How would one "migrate" from 10.5.4 to 10.5.5? As far as I know it is only possible to run the updater program to get from 10.5.4 to 10.5.5.
    There are aspects of software RAID that can be circumvented by fully recreating it under 10.5,
    as well did you run a full volume (verify, repair permissions) & disk check (at least & minimally, verify the SMART status) ? Verify the status of the RAID ?
    I ran Disk Utility and repaired the RAID, one side had an incorrect number of extended attributes, the other side was fine.
    How do I check the SMART status?
    Have you tried connecting to the server from your workdesk, via Server Admin & Workgroup Manager ? You might very well be able to. If so, shutdown services (you haven't stated which are in use),
    I didn't check if I could get to to the system via those apps, sorry. Last night after 6.5 hours I gave up and rebooted the system.
    and then follow my steps posted here:
    http://discussions.apple.com/message.jspa?messageID=8430397#8430397
    Thanks, I'll check these out.

  • Direct X is installed but could not be initialized.  Please reboot your system and then relaunch Elements Organizer.  Editor works but not Organizer.

    I have a windows PC with windows 8.1 and have had it for 13 months.  I have PE 9 installed and have been using it without a single problem when out of the blue I can't open the Organizer.  I can open the editor but not the organizer.  When I attempt to open it I get this...Direct x is installed but can't be initiated.   Please reboot your system and then relaunch Elements organizer.  Obviously, I have done this many, many times.  I have had two computer experts look through my computer for a total of 13 hours and neither one of them knows what the problem is.  One of them thought the issue might be bad graphics driver but the other computer guy thought that was definitely not it. 
    The second technician thought it was a corrupt file somewhere in the catalog.  We downloaded a trial version of PE 12 and tried to open that and it won't open either.  Seriously at my wits end here.  I'm willing to pay to have this fixed.  I've already spent hundreds of dollars to no avail.  Rest of the computer works flawlessly. 
    We have done everything that has been posted here on this topic without success.  Rebuild the thumbnail cache, repair the catalog via the catalog manager, gone in and made sure that Direct x was actually turned on...it is!  I'm truly expecting a miracle as this is basically my last resort.  I have over 30,000 images and just don't know what to do.  Clearly installiung a new program is not the answer as PE 12 trial version came up with the same issue.  HELP!!!!!!!!!!!!!!!....PLEASE!!!!!!!!!

    Hi,
    Please try out the instructions mentioned by Vaishali in forum thread:
    https://forums.adobe.com/thread/1388269?tstart=0
    Thanks,
    Anwesha

Maybe you are looking for