IOS 8 all videos only play in landscape view

TV Shows, Movies and even Music Videos only play in Landscape view, not Portrait.  Is this everyone's experience?

The Apple iOS 8 Preview site used to have the wording quoted below (still viewable in the Google search preview) but as noted in http://www.macrumors.com/2014/09/12/apple-demotes-icloud-photo-library-beta/, it has been delayed
Every photo, every edit, every album now lives in your iCloud Photo Library, easily viewable and consistent on all your iOS devices. Automatically.

Similar Messages

  • Will iOS8 allow music videos to play in landscape mode?

    Will iOS8 allow music videos to play in landscape mode?

    Nobody here would know as we don't have ios 8.

  • Video only playing audio

    On my PC (Windows7 and ITunes10.6), my music videos only play audio.  It did play both video and audio, but currenly only audio is working.  Any advise is appreciated.

    See if this article will help:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718

  • [Zen Vision:M] videos only playing first 8 seco

    I just got my Z Vision:M today, when I try to play videos that I transfered to the player, the videos only play the first 8 seconds. I updated to the newest version of the firmware and am still getting this problem. How can I fix this? Thanks.

    Since you have had the player for a few years you may need to replace the battery. Also having it sit for a looong time without charging it does not help keep the battery in shape.http://www.batteryuni'versity.com/parttwo-34.htm Slipping the tip of a safety pin into the reset hole while the adapter is attached (difficult but doable). Does the charging icon show it as charging while connected? BTW 3 hours is not enough time to charge when it has sat dead for a while.. If it shows that it is charging power it down & leave it til the blue light by the power switch stops pulsing & the charging icon stops blinking.

  • Youtube videos only play properly at 240p

    I've had an annoying problem for several weeks.
    Youtube videos only play properly at 240p.  At any rate higher, they are garbled.  Audio is fine, but the video is garbled.
    Any ideas?
    Tried uninstalling and reinstalling.  No luck.
    This happens with IE and FF.
    Thanks,.
    Eph

    Try to
    disable hardware acceleration (Flash Player Settings);
    update the drivers for your graphics/video/display adapter.

  • Video only plays for a few seconds, no sound, ALL BROWSERS

    I have having that notorious problem that seems to originate from sometime in 2008. I found no recent reference to it, but that's irrelevant.
    I have no sound in youtube/megavideo/any flash, and the video will only play for 2-3 seconds. This is the same for IE, and Opera.
    Uninstalling via Adobes uninstallation tool and then reinstalling has not fixed this issue. I do not have Realplayer on this system, that I am aware. I am outof ideas. I am using Windows XP SP3, if any other information is relevant I'll post it.

    Hi, well it sounds like something is certainly conflicting but exactly what can't be determined at this point. Confirming that you have the correct Flash Player files Installed would be the first thing to check. Go to C:\Windows\System32\Macromed\Flash  Open Flash and post back all files listed. NPSWF file(s) will need a right click and then click on Properties to obtain the version number(s).
    Using IE, check in all add ons for Shockwave Flash Object...ActiveX Control..Flash10h.ocx. It should be listed that way and Enabled. It may include the vs # 10.1.53.64.
    Using FF, check for the SWF vs 10.1.53.64 plug-in and it should be listed that way and Enabled.
    Thanks,
    eidnolb

  • I upgraded to IOS 8 and all videos stopped playing both Instagram, YouTube and other sites. What can I do to normalize?

    The videos stopped playing after updating the IOS, what to do for work?

    Hello Bruna Camargo,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with an app downloaded from the App Store please follow the steps in the article linked to below.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    Take care,
    Alex H.

  • Flash videos only play for about 2-5 seconds

    Ever since I've had to restore my whole computer, (due to sound and airport card problems which are still unresolved) any flash video such as youtube videos or any others will only play for 5 seconds (yes I still care about videos playing even though my sound is gone) and i've re-downloaded the flash player from adobe and now downloaded again the safari 3 beta, and it still won't work. Same thing on Firefox. Any ideas?

    It's probably the new 'taste filter' trying to keep you from emberrasing yourself in public. Try playing them when you're alone. If it detects no one else is in the room, it may allow you to view them. 
    Seriously... Do they play in iTunes on your computer? If they're in your iTunes library, un-sync them from the phone, then sync them back.

  • I have downloaded The Final by Wham (Deluxe edition) and most of the Videos only Play for about 2 minutes then freeze

    Hi all
    I am new to iphone and have just bought Wham The Final (deluxe edition) which includes all there videos.
    When i go to play the videos they play for about 2 minutes then they just freeze. Club tropicana does not even play at all.
    I have other video purchases which all play fine.
    Is there anywhere in itunes where you can re-download?
    Thanks in advance

    It's probably the new 'taste filter' trying to keep you from emberrasing yourself in public. Try playing them when you're alone. If it detects no one else is in the room, it may allow you to view them. 
    Seriously... Do they play in iTunes on your computer? If they're in your iTunes library, un-sync them from the phone, then sync them back.

  • Mobile video only playing through headphones from 5D MKIII .MOV mp4 conversion

    I have not run into something like this before and hope that someone has...
    I have been capturing video with a 5D MKIII for a while now and create videos for work and upload to YouTube and mobile platforms. Someone recently told me that through the YouTube app, these videos (this one for example: Hail Recovery in V12 Corn - YouTube) will play fine on computer browsers and on a mobile device through headphones. When you try to play through the YouTube app without headphones, this video will play only garbled sound and very quietly.
    I have traced the problem to the 5D MKIII video capture, as capture with a canon XF105 doesn't have the issue (after AME conversion to mp4) on upload or playing directly from a mobile device or streaming from something like Dropbox.
    I'm not sure what to check now. I have tried almost every conceivable export choice and setting through AME CC2014 (and tried CC as well). I have tried this through my laptop and another machine on the same software set. I have tried exporting just the MP3 and listening via dropbox (same issue - sound garbled and quiet). I have tried W/O Quicktime installed on machine (thinking there might be an issue with the AME QT and the local QT. I have tried taking the .MOV file direct from the camera and creating a .AVI and MXF file and then used those in editing and export to MP4. None of these things have changed the outcome.
    The things I know are:
    - only happens from DSLR not other captures (like XF105)
    - only happens to sound trying to come through mobile device speaker (works with headphones) - I have checked the various 'mute' settings on all mobile devices i've used and this isn't the issue. I have tried Samsung, iPhone and iPad all with the same result
    - audio plays normally through computer browsers and through mobile device headphones
    If anyone has had this experience please let me know. This is very problematic as we have transitioned to using DSLR for most video now. It seems to be something with streaming but it also happens when I take the file (from the camera > mp4 or after editing in Premiere/AE > mp4) and play direct from the device. It must be something with the conversion from .MOV to mp4 but what?
    Thanks in advance for any insights.
    System:
    Dell Precision M6800 64-Bit Windows 7
    Intel (R) core(TM) i7-4940MX CPU @ 3.10GHz
    32 GB RAM
    NVIDIA Quadro K5100M Video Card (8GB RAM)
    Adobe Master Suite CC2014.2
    Adobe Master Suite CC
    Tom

    See this link:
    Re: audio missing on vimeo and youtube

  • Youtube videos only play for two seconds before displaying an error message since updating to FF28.

    Since updating to Firefox 28, videos on Youtube will display a spinning wheel for some time, only play one or two seconds of the video, and then go to a Youtube ‘an error has occurred’ screen. At this point, Flash will crash, hanging Firefox for a minute or so. This occurs whether I am using the HTML5 player or the default player. The same videos worked fine previously in Firefox 27, and still work fine over the same wifi connection on Chrome for Android. A similar issue had occurred under Firefox 27, but only if the video was embedded in another site. Vimeo and Facebook Video still work fine: the problem seems to be specific to Youtube. Everything else on the Youtube site itself works; it's only videos that are malfunctioning.
    I am running the latest Firefox and Flash updates on Windows 7 64-bit, with Tree Style Tab, Download Statusbar, Adblock Plus, Foxyscrobbler, NetUsageItem, and Pocket. The issue still occurs with all add-ons disabled in safemode, and with just Adblock disabled (my first thought was that perhaps Google had changed ad delivery in a way that caused ABP to break videos, but this doesn't appear to be so).
    Does anyone have any ideas as to what's gone wrong? :)

    Sorry, I forgot to mention, I tried turning hardware acceleration off as was suggested elsewhere on the support forum, but this didn't help either.

  • Facebook iOS App - Video Auto-Play Interrupts Airplay Stream

    Has anyone else noticed that since Facebook implemented video auto-play that if you are on wi-fi, have the FB app open, and are streaming over Airplay, that when the app encounters a video and plays, the Airplay stream drops, requiring you to restart Airplay manually?
    I am guessing this was an unintended result of Facebook implementing this feature, but it's annoying. The only workarounds that I'm aware of are to change the FB app setting to only allow videos to play over wi-fi and then shutting off wi-fi on the phone, or just simply using one iDevice just for streaming and another for checking the app, but it is darned inconvenient. I reported this to FB as a bug, but I doubt that they will reverse their decision about it, unless Apple tells FB to change this.
    Can Apple require Facebook to add the ability to turn off auto-play completely in the app, since the app's behavior is technically interfering with an Apple-specific system service (Airplay) in iOS?

    Just as an addendum: the behavior of the FB app technically violates Apple's Human Interface Guidelines for managing audio interruptions:
    https://developer.apple.com/library/ios/documentation/userexperience/conceptual/ mobilehig/Sound.html#//apple_ref/doc/uid/TP40006556-CH44-SW1
    Specifically, the app does not display audio controls when the video plays, nor does it resume the existing audio stream (the Airplay stream)  when the video finishes: "If your app doesn’t display any media playback controls that people can use to play or pause audio, your app should always resume previously playing audio when an audio interruption ends, regardless of whether the Should Resume flag is present."
    I'm surprised that Apple didn't enforce this guideline when FB submitted the app.

  • Video only plays for a few seconds, then freezes

    The video, which I got from the apple website, plays fine in iTunes but once I upload it to the iPod it will only play for a few seconds before freezing and becoming nonresponsive. Is this a software problem? Anyone know of a solution? Thanks.

    Or you can follow these instructions.... (adopted from btabz)
    Here are more detailed instructions on how to go back to 1.0, espescially if you bought your iPod in the last couple of months and it came with 1.1.
    First, please download the older version of the iPod Updater here...
    http://appldnld.m7z.net/content.info.apple.com/iPod/ww/win/061-2225.20051128.PDW nw/iPodSetup.exe
    Now install that updater and restart your computer.
    Now open the iPod updater (Start-->all programs-->iPod and find the iPod updater you just installed
    Open the iPod Updater and connect your iPod. With that older version of the iPod updater you just installed, restore your iPod by clicking restore.
    The iPod will restore and go back to software version 1.0. Now reload everything back into iTunes.
    If you don't want to restore, see this...
    http://discussions.apple.com/messageview.jspa?messageID=1813873

  • Captured video only plays audio through one speaker

    I captured video from a mini dv and when I play the clip in FCP the audio only plays out of one speaker and it only shows on one audio meter in FCP. I captured this video with a DSR-20 and it displayed NS Audio on the screen. Both meters were playing on the deck and in FCP while previewing and also through my headphones. Does anyone know what I need to do this to correct this?

    First I'd verify how the audio was captured. Did you have it set for Ch 1 + Ch 2, or Stereo, or Ch 1 [only], or Ch 2 [only] or as a mono mix?
    Next, verify that you actually had two channels of audio on the tape, not just one channel.
    Assuming that there are two channels on the tape, load the captured clip into the Viewer and see if there is an audio waveform on both channels. If there is, check to see if both channels are panned the same - if they are, pan one left and one right or both to center.
    If there were no waveforms on one of the channels, try capturing a short segment of the same tape using another Firewire cable.
    -DH

  • I can't get iOS Development Videos to play in Safari or iTunes

    If I go to https://developer.apple.com/videos/ios/ and try to play any of the videos listed, they will not play. I am using Safari 6.0.1 on my MacBook Pro which is running OS X 10.8.2.
    When I click the "Watch now" link for the video I want to see, the player is show at the top of the page. If I click the "Play" button, nothing happens.
    If I try to download it in iTunes (11.0), the video appears to download without any problem but, there is no indication that the video downloaded in the video list (the little button still reads "Get" for the video I downloaded). If I click the video in the list, and hit the play button, nothing happens.
    It's hard to believe I am having problems with both sources...what am I doing wrong?
    Thanks in advance for any advice you can give.

    Well, I guess those videos are not supported by the current version of iTunes.
    I originally had iTunes set to "Open in 32-bit mode" so I could watch these videos. But apparently, since I upgraded iTunes (and OS X), that setting no longer enables those videos to play. When that selection was enabled (Open in 32-bit mode), I experienced the behavior above. Once I de-selected that setting, and re-opened iTunes to try the video again, I recieved a message that stated "This movie requires QuickTime, which is not supported by this version of iTunes."
    So, I guess I am out of luck?
    This is hard to believe.
    here is the issue, described again, in a question that has gone unanswered since October:
    Unable to play developer video in iTunes

Maybe you are looking for