IOS 8 - are we realy waiting for this?

iOS 8
Words like the biggest, the best etc. go with this announcement. Nowhere I read: we listened to our community and this is what you asked for. For years I am waiting for a few simple things:
1) a mail app that works and where you do not have to delete the same male 4 times a day. almost a total forum is dedicated to this issue. Apple seems to not want to fix this problem. I am now a happy user of MyMail, they seems to have some clever guys that are able to write the oldest of all apps, a mail app!!!
2) I want to add a song to a playlist while I listen to it. Many words are said about this, I rest my case
3) I want a photo app where a picture is in one place only. No virtual **** of what so ever. So, if I move it to a album, it's only in that album
4) I want a great camera. Yesterday I made a picture in a plane. A guy with a HTC did the same. Wow, what was I jealous! With a quality like that, there is no need to develop al these photo apps!
5) I want to be able to play that specific movie format. That Steve Jobs had a fight with some guy in that company is not my problem. I am a user and not involved in a dead mans fight of who got the biggest!
is that so difficult Apple? I have seen no simple thing in this release that I was waiting for! So, come out of your ivory tower Apple and start to listen to your users, before we do the next upgrade to an HTC!!!!!
Henk

The only way your concerns will reach Apple is if you use the feedback pages. Be as specific as possible in your request (e.g. "A mail app that works" and "that movie format" is not descriptive enough). A "great camera" is almost entirely hardware, so an iOS upgrade is unlikely to change what you have.
http://apple.com/feedback
Matt

Similar Messages

GET_FILE_LIST action:Folder & Mask are the mandatory inputs for this action

hi all,
Iam using GET_FILE_LIST action to retrieve few files from a folder stored in WEB directory. Folder & Mask are the mandatory inputs for this action to read the files. To get any xml files we can use the Mask value as ".xml". Is there a way or any mask value which would get all the files from the folder and then using a condition or switch I can create a desired sequence based on file type.
Thanks,
Gilmour

Hi Gilmour,
Try with mask value * ("asterisk")
or
("asterisk.asterisk")
Regards,
Anil
Edited by: Anil Dwivedi on Feb 19, 2009 9:42 AM

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

The sound cuts out while a track is playing in iTunes. Are their any fixes for this?

The sound randomly cuts out while a track is playing in iTunes. The track has to be stopped and restarted before sound returns. Are their any fixes for this?

Hello there, smalltowngirl93.
The following Knowledge Base article offers up some great in-depth steps for troubleshooting audio not playing in iTunes or Quicktime:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

On hand quantity exists or there are open delivery transactions for this item

Hi all,
on hand quantity exists or there are open delivery transactions for this item in oracle apps at the master item copy from & lines status in Transaction Form in Backordered.
Thank You

Hi,
Make sure you completely receive the PO, then you should be good enough to convert the item to expense.
Thanks
-Arif.

Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.

Hi,
I am using EWS Java APIs and passing OAuth tokens to fetch data from office 365 mailboxes.
Because I am developing Web APIs I preferred using "Application Permissions" defined in Azure active directory application for Office 365, and used "client credential flow" OAuth flow to fetch OAuth token specific to application which will
allow "Have full access via EWS to all mailboxes in the organisation".
After fetching token with the procedure specified in the document "http://blogs.msdn.com/b/exchangedev/archive/2015/01/21/building-demon-or-service-apps-with-office-365-mail-calendar-and-contacts-apis-oauth2-client-credential-flow.aspx"
I passed this token to EWS Java APIs,
it gave me error saying:
microsoft.exchange.webservices.data.ServiceResponseException: Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.
I tried similar thing with EWS managed APIs for .net. Got similar error.
Can anyone provide some help and direction to resolve this error.
Thanks & Best Regards,
Pranjal

I see you found an answer with the X-AnchorMailbox header on StackOverflow:
http://stackoverflow.com/questions/29554724/exchange-web-services-are-not-currently-available-for-this-request-because-none

I had to replace the hard drive on my computer. I am now trying to download Adobe Photoshop CS6, previously purchased. I get an error that files are missing after waiting for the whole download. I have Windows7

I had to replace the hard drive on my computer. I am now trying to download Adobe Photoshop CS6, previously purchased. I get an error that files are missing after waiting for the whole download. I have Windows7

The error msg said that the file archive part of Adobe photoshop CS6 is missing and that I need all parts in the same folder.

My iPhone 4 with cash card is slowly emptying the balance of the card. Only Wi-Fi is normally ON, most other things OFF. Are the Apps responsible for this, or is something wrong with the phone itself? How can I stop the "thief"?

My iPhone 4 with cash card is slowly emptying the balance of the card. Only Wi-Fi is normally ON, most other things OFF. Are the Apps responsible for this, or is something wrong with the phone itself? How can I stop the "thief"?

I have this exact same problem. One solution is having your friends change their fake aliases on Facebook to their real bloody names, but I realise this is no easy fix.

I have an ipad 4 running ios 7 but i noticed ios 7 on my ipad seems laggy. I already did a factory reset but it seems doesn't change a bit. Are there any solution for this or I need to wait for the next ios 7 update?

Am I the only one who facing this problem or there someone else. I did a factory reset yesterday but it still laggy. Do I need to wait for the next ios 7 update or what?

Hi Amish,
I should have mentioned that I have signed out of the iCloud Control Panel several times and no syncing occurs.
Thanks for your response anyway. I appreciate your feedback.

ITunes 10.5 and IOS 5 sync hang at "Waiting for items to copy", possible fix

After seeing many other threads, I am hesistant to start my own. However, I thought it worthwhile to share how I fixed this problem on my iPad 1.
SYMPTOM: iTunes sync doesn't complete, with the message "Waiting for items to copy" displayed. There are no error messages, and it appears that all content is valid and synced. It is possible to cancel the sync from the iPad (Settings -> General -> iTunes Wi-Fi Sync) or by exiting iTunes.
RESOLUTION: Select the iPad in iTunes, and in each category (Info, Apps, Music, Movies, TV Shows, Podcasts, iTunes U, Books, Photos) make one modification, just so the Apply button appears. Click Apply. The sync will restart, even if it's already stuck at "Waiting for items to copy".
On my iPad, I noted that if I de-selected the option to sync Books, one book keep re-checking itself after I clicked Apply: The iPad User Guide for iOS 5. I had downloaded this one via the iBooks app in the iPad. I right-clicked the iPad and picked "Transfer Purchases", but it appeared to do very little.
From the iTunes Library under Books, I deleted the local copy of the iPad User Guide for iOS 5, then synced again.
It worked! Briefly, there were extra messages about transferring the iOS 5 user guide again, but the Books category now worked correctly.
SO... it appears that the bug may be related to having items on the device which didn't get transferred fully during the "Transferring purchases" part of the sync.
SUMMARY: If you purchased some items then notice that sync doesn't work right, try deleting the local iTunes copies of the recent purchases and sync again.
Good luck!

Hi TD,
You solved my problem awhile ago and I didn't post a thank here. So thank you! I was having a problem with a PDF that kept rechecking itself. It was not the User guide. Anyway, I posted your solution on another discussion board and it has solved the issue for several people. Here's the link. My post is on the last page. https://discussions.apple.com/thread/3391000

IOS 8 iMessage and FaceTime "Waiting for Activation"

I just upgraded my iPhone 5 and iPad to iOS 8 and now I can't get my iMessage and FaceTime to work. When I try to send messages (sms or iMessage) from my phone I get a "Not Delivered" message. I've tried resetting my network settings, I've also messed with toggling on and off the iMessage and FaceTime buttons in settings, and I've also tried setting up my iMessage and FaceTime when on wifi, airplane mode (with wifi) and using my cellular network.
Even though my phone is not registering these changes, I'm getting a popup message on my laptop saying "Email Addresses Added to 'iPhone,'" so it seems like the laptop is recognizing that I'm getting hooked up to iMessage but my phone just work. Anyone else having iMessage or FaceTime problems? do I need to downgrade back to iOs 7?

If you still got this issue, I just solved it on my wife's 5s. After reading a different blog that suggested turning off FT from the Phone settings and then reset. But my wife's phone didn't even had the FT option under settings > Phone so I just did step 2 and it worked.
Step 1) Goto: Settings > FaceTime and turn off
Step 2) Goto: Settings > General > Reset > Reset All Settings
After the phone has restarted, search for FaceTime and have fun.
Remember that apple would prefer you are connected to a WIFI source.

Vodafone India customer....on my iPhone5, imessage and facetime are giving error "waiting for activation"

Hi
I have iPhone 5 with Vodafone India connection. The major challenge is Facetimche & iMessage giving error "waiting for activation"
I have tried all the available solutions in Google search but still no change.....
Please help in getting this sorted out!!!
Thanks
Atin

Level 1 (0 points)
chakkochi
Re: My iMessage still says "Waiting for activation..." Jun 17, 2012 10:04 PM (in response to bradfromwinnipeg)
Hi All,
This problem is solved for me, with some help from the carriers. At last
Let me describe my situation once again.
I am from India, where the official iPhone carriers are Airtel and Aircel.
I have two prepaid connections - One from Airtel and one from Reliance GSM
Whenever I try to activate iMessage from my Reliace SIM, it shows activation unsuccessful, the the receive at shows my email ID only.
But whenever I try activate it using Airtel SIM, it activates just fine. But since my primary connection is the Reliance one, I wanted it to get activated for Reliance.
I have tried every tweaks/restore etc mentioned in this discussion, but nothing worked.
The solution:
This does not require any jailbreak/restore. Just a little help from the carrier.
For all reliance GSM customers in India, you can just try to activate in again. I think they have solved it for all customers.
I was almost lost hope of activating imeesage on Reliance. But then one of my friends bought a new iphone (4S). He had a docomo connection, and he also had this same issue. But using his contacts in docomo, he enabled some trace in his connection, and found out that the phone was trying to send SMS to a UK number (short code), which is blocked by their RA team.
This is that magic number : 00445773142076
So from him, I got the number. I raised a complaint with Reliance.
The complaint had nothing about imessage, but it said: "I am unable to send international SMS to the number 00445773142076, even after having sufficient balance and an active SMS plan"
So they have done some 'unblocking' and called me this morning and asked to try again 'sending sms to the same number' . I went to settings and activated imessage and facetime/ Thats it !!!!.
A big thanks to Reliance GSM support for the quick solution.
For anyone on Reliance GSM in India, just try activating it now.
For others, log a complaint with the carrier that "you want to send SMS to the number 00445773142076.
Thanks all

RV110W - trying to set up 2 VLANS - are there docs / help for this?

I am trying to set up an RV110W router with 2 VLANs - 1 for guests to the office to just have internet access via wireless and another for employees to be able to access the LAN and internet wirelessly. I have not done anything with VLANs before, so please bear with me.
I thought this would be simple, but banging my head against the wall with all the terms in the docs:
http://www.cisco.com/en/US/docs/routers/csbr/rv110w/administration/guide/rv110w_admin.pdf
port 1 is connected to a wired LAN / unmanaged switch with office PCs. So these machines / nothing on this subnet tag the packets before they get to the router. This subnet is using 10.10.1.0/24
Port 2 is connected to an Engenius EAP 300, a wireless access point that can broadcast SSIDs and tie each SSID to a different VLAN.
SSID1 is called Private and is set to be VLAN 1. There's encryption on this SSID - only office staff would be able to log on.
SSID2 is called public and is set to be VLAN 10. There's no encryption on this SSID.
I know - the router also does this, but where the router is vs. where the wireless is needed, we need to have the Engenius at that remote location.
I have the RV110W set to give out 10.10.1.0/24 IPs when you connect to the SSID1 / VLAN1
And it gives out 10.10.10.0/24 IPs when you connect to the public SSID / VLAN10.
Both get on the internet fine. The only issue is how to set the VLAN membership for each port / and any other settings so that the wireless devices on VLAN 1 can get to the LAN devices on Port 1. (and the public / vlan 10 devices on the wireless network to NOT get to the devices on port 1, but i think that's working.
I played with tagged / untagged / excluded, for the port membership, but either the wireless VLAN 1 devices get blocked from even the web (when port 2 is set to untagged, since they ARE tagged VLAN1) or they can't get to port 1 when set to tagged, since the port 1 devices are all untagged and the reply packets get blocked?
the doc for this unit talks about inter-vlan routing but doesn't explain what that is. THe wireless isolation should be turned on for vlan 10, right? We don't want guests to be able to access other guest's machines?
I saw on page 71 on how to set up the guest network, but that's using the wireless built into the box, not a wireless access point.
Overall, what I want is:
VLAN 1: port 2 (with tagged VLAN1 packets) and port 1 (with untagged packets) can pass data between each other and access the internet
VLAN10: port 2 with tagged VLAN10 packets can only get to the internet.
Is that doable?
How?

thanks. Still not working
For the vlan membership page
when set like this:
           port1         port 2
vlan1     untagged    untagged
vlan10 excluded     tagged
connecting to the vlan1 wireless SSID on port 2, I can't even get an IP address from the router (the dhcp request can't even come through port 2 because it's saying vlan1 packets have to be untagged?
connecting to the vlan 10 wireless SSID on port 2 gets a DHCP address and can only get to the web, so that's good.
If I change the membership to:
                  port1 port 2
vlan1 untagged tagged
vlan10 excluded tagged
connecting to both SSIDs on port 2 will get you a dhcp address, and vlan1 devices can get into port 1, but trying to admin the wireless access device on port 2 or even pinging it, now fails - 'cause the router gatekeeper says if you want to come through port 2, your packets have to be tagged? and the packets from port 1 to port 2 are untagged?
If I change the membership to:
            port1 port 2
vlan1   tagged tagged
vlan10 excluded tagged
connecting to both SSIDs on port 2 will get you a dhcp address, but replies from the wired PC on port 1 / vlan1 vlan1 can't get back out of port 1 'cause the router gatekeeper says if you want to leave through port 1, your packets have to be tagged? and the ping reply is coming form a device with untagged packets? although the devices on vlan1 / port 1 CAN get on the web with their untagged packets.
the wireless device says it supports 802.1q
http://www.engeniustech.com/resources/EAP300_DataSheet_v2.1.pdf
when they say port 2 / vlan 1 tagged, is it saying packets coming in FROM devices on that port have to be tagged? Or packets going TO devices on that port have to be tagged? or both directions?
Any advice?

What are rules of etiquette for this forum?

I have posted a few basic questions in recent times about java programming issues. Right now I am using JBuilder2005. I am relatively new to the Java progarmming community, and I don't know if JB2005 is considered evil over say, WebSphere, Eclipse, etc. But responses I have received for my basic questions (which I ended up finding my own answers to) have been less than friendly.
Case:
>>
Re: assing which servlet is the startup page? Author: IanSchneider Mar 11, 2005 3:54 PM (reply 1 of 1)
You gots to be crazy if you think I'm helping you with your assing. Whats JB2005 anyway? Whatever it is, it sounds like its an impediment to you knowing whats going on. Try looking in your web.xml and actually understanding how servlets work.
<<
I have received responses similar to this for other posts where people are conscientiously steering me in the wrong direction. Well, I am not posting to ruffle any feathers, but since I have not seen any specific rules on what to post/not post other than no disruptive stuff, my question is if this forum is like a Pay forum and/or an anti Borland forum (vs a forum for exchanging information on Java programming).
While I'm at it I am trying to use a DataExpress control from JB2005 to connect to an Access Database (for practice - we have Oracle but I am practicing on Access). I select the driver
sun.jdbc.odbc.JdbcOdbcDriver
then it asks for the URL, it gives me this option in the ...:
jdbc:odbc:MS Access Database
so where do I add the location of the mdb file? I can't get the control to connect. I can connect to Access if I just use code and read/insert rows of data, but I want to use a DataExpress TableDataSet control so I can load it up with rows of data from a database file in a client application. I can load up an html table of data in a servlet for display . But how can I display data the same way in a client app?
Is this forum even the correct forum for me to ask this question - or should I look for a Borland forum?
Thanks.

I have posted a few basic questions in recent times
about java programming issues. Right now I am using
JBuilder2005. I am relatively new to the Java
progarmming community, and I don't know if JB2005 is
considered evil over say, WebSphere, Eclipse, etc.
But responses I have received for my basic questions
s (which I ended up finding my own answers to) have
been less than friendly.I don't think people care for your brand of IDE (I'm using both JBuilder 2005 and Eclipse). People might be wary of newbies using any IDE, as they're usually in over their heads.
You gots to be crazy if you think I'm helping you
with your assing. Whats JB2005 anyway? Whatever it
is, it sounds like its an impediment to you knowing
whats going on. Try looking in your web.xml and
actually understanding how servlets work.Obvious: you posted a homework assignment, and people kicked your butt. And I guess Ian just didn't recognize "JB2005" means JBuilder 2005. I wouldn't say it's his fault.
I have received responses similar to this for other
posts where people are conscientiously steering me in
the wrong direction.Didn't happen in the above case.
Well, I am not posting to
ruffle any feathers, but since I have not seen any
specific rules on what to post/not post other than no
disruptive stuff, my question is if this forum is
like a Pay forum and/or an anti Borland forum (vs aNeither. But I urge you to read the following link:
http://www.catb.org/~esr/faqs/smart-questions.html
It's not at all about the etiquette for this forum, but for fora in general.
then it asks for the URL, it gives me this option in
the ...:
jdbc:odbc:MS Access Database
so where do I add the location of the mdb file? IYou don't. That's a mapping provided by the OS. Go to "System Controls" -> "Data Sources (ODBC)" or search the help for it if you don't find it, and set up the Access driver.

What are the tables used for this Report

hi all..
i am a fresher for ABAP. i need the help.
what r the tables used for this report.
Reports provide pending order details according to Material wise and customer wise for particular month.
thanks in advance
RK.Ashokkumar.
9994262112.

hi
good
try with these tables,
MARA
KNA1
thanks
mrutyun^

IOS 8 - are we realy waiting for this?

Similar Messages

Maybe you are looking for