IOS 8, Bluetooth and Headphones

After updating my iPhone 6 and iPod Touch to iOs 8.0.2 The devices are unable to find my Jaybirds headphone. Is there any way to fix this?

similar problem- since upgrading to iPhone 6 I can't connect with my JBL Charge speaker- the phone searches but can't seem to find it. I was able to pair the phone with my car. I've tried resetting the network setting, turning off and on the bluetooth button. Any other suggestions?

Similar Messages

Right side sound only works over Bluetooth and headphones

Yonly the right speaker works over Bluetooth and headphones. How do I get my left speaker back?

Turn off Mono audio.
Settngs > General > Accessibility > Mono Audio > Off

While listening to music in my car, I don't have the option to choose between bluetooth and headphones anymore. Why?

On IOS 6 and earlyer, I use to be able to choose between the bluetooth or the headphone jack. Now, I can only play music true my bluetooth and I can't pause the music. Anybody has a solution?

Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

IPhone 4 bluetooth and headphones won't work.

When I connect to bluetooth or headphone jack. The music/sound plays through my iPhone speakers. I've tried with Bluetooth headsets and speakers. Also with an aux cord and headphones. It just started recently with the latest iOS 7.1.2 update. I will be downgrading my software to see if that works. Couldn't figure out what what going wrong.

Figured out that, with the update, the new pull up menu has a place to change where the sound plays through. It loaded it as default to the phone. All I had to do was change it. Whoops.

IOS 5 / bluetooth and tethering

Since my upgrade to IOS 5 the wireless functions have become unstable
1) When I use blue tooth with my car, the phone just disconnects after about 30 minutes, then the phone will crash about 30 minutes later
2) When I turn on wifi hotspot tethering my computer can not discover the wifi network. If I update the password, the hotspot is then visible until I turn it on an off again.
I used both of these features daily under ios 4 and it worked fine.
This is an iphone 4 not a 4S
Has anyone else had issues since upgrading to IOS 5 on and iphone 4?

Please stop bumping, it is rude.
WiFi is the faster and stronger connection with more range and far less susceptibility to interference. I would go that route and forget about BT.

Bluetooth and headphones in IPAD

I am using I-PAD ist generation.
How can I setup my I-PAD to use a bluetooth headset device and listen to headset directly to the headset input?
I connect my headsets alone and it works fine.
I connect my bluetooth device for my headsets and it works fine alone.
When I have them bluetooth headsets enabled, the headsets plugged into the I-PAD is disabled and I cannot hear anything come out of the direct connected headsets.
Is this a limitation? If not, what setting am I missing?
Thanks,
J

I picked up a pair of Jabra Halo Bluetooth headphones and they rock. When I first got them, some of the features did not work correctly, however with the newest iOS 4.2 update for the iPad, every feature is now supported. You can control volume, pause/play, skip and rewind audio tracks. Many folks complained that the lowest volume available on the headphones was not low enough, well now with Airplay available on iPad, you can control the volume from the iPad itself, which is nice. Basically anything that was wrong with the phones before has been fixed by Apple's iPad software update. They run about $100 a pair but they're totally worth it. Hope that helps.

IOS 8 bluetooth and modem mode?

Hello,
I have installed iOS 8 on my iPhone 5s and on my iPad 4. Firstly there is no more modem functions in the phone. Secondly there is no connection through iPhone and iPad. Tell me please somebody, what to do and will everything in the near future repairs?
Thanks!

similar problem- since upgrading to iPhone 6 I can't connect with my JBL Charge speaker- the phone searches but can't seem to find it. I was able to pair the phone with my car. I've tried resetting the network setting, turning off and on the bluetooth button. Any other suggestions?

IOS 6, Bluetooth, and iPhone 4

When I originally purchased my iPhone 4, it did not properly pair via Bluetooth with my 2008 Infiniti FX 35 for hands-free calling. It wouldn't maintain a connection. Now with the iOS 6 update, the phone seems to pair with the car and maintain the connection. I've dialed out using hands-free without any issue thus far. I have not however received a call to test the connection. Has anyone else experienced this improvement with pairing with that particular phone and car?
This question is more for Apple: if in fact the Bluetooth now works with my vehicle as it should, that suggests the issue was with the software on the phone all along which begs the question, why wasn't this fixed sooner?!

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Bluetooth and headphones

Can I use my Bluetooth headset and my headphones at the same time for two ppl to listen?

Figured out that, with the update, the new pull up menu has a place to change where the sound plays through. It loaded it as default to the phone. All I had to do was change it. Whoops.

Stereo Bluetooth and headphone jack at the same time?

I'm looking forward to the A2DP support in the firmware 3.0 update. I plan to get a motorokr s7hd. I'd like to be able to output audio from my iPhone 3G to my car via the headphone jack. Can I also connect a stereo Bluetooth headset and just use that in the event of a phone call? Will it mute/pause the music when a call happens?

You can set the iPod app to output audio to your choice of a BT headset, or the jack output (not simultaneously). A BT headset can still get call audio if paired, but working in one channel only - no stereo.

Can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?

can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?

According to the Sony Web page for those particular eaphones, no. They aren't compatible with iOS 6. Only iOS 5 and below.
http://esupport.sony.com/US/p/model-home.pl?mdl=MDR1RBT&template_id=1&region_id= 1&tab=howto#/howtoTab
Sony wrote:
Are the headphones compatible with the Apple® iOS®6 operating system?
Solution
The headphones are compatible with Apple iOS5 and lower. They are not compatible with the Apple iOS6.
Region
Canada
United States
Products
MDR1RBT
Last Modified Date:12-05-2012ID:C1032819
You can still try though, but there's no guarantee.

HT4623 how can i fix the problem on ios 6.1.3 in my bluetooth and wifi connection?

how can i fix the problem on mi ipad mini. When i updated the ios to 6.1.3 the bluetooth and wifi didn't work properly.

Hey maricel737
There are two different articles that go over troubleshooting steps for solving issues with Wi-Fi and Bluetooth. This first one goes over Wi-Fi on your iPad:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
This next one outlines suggestions for Bluetooth on your iPad:
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
On the Bluetooth one, I'd just skip ahead to the "Additional Information" section where the troubleshooting steps start.
Best,
David

TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com

IOS 7.0.4 iPhone4s Bluetooth and WiFi "Off" but Bluetooth spinning

As title mentions, I have an iPhone 4S, running iOS 7.0.4 (the latest as of this writing).
After a holiday trip to Mass., my bluetooth and wifi won't turn back on. The settings screen shows Airplane mode Off (switch), WiFi Off (word), Bluetooth Off (word).
When I tap on Bluetooth, instead of seeing the switch, I have a spinner. It says "location accuracy and nearby services are improved when Bluetooth is turned on." and nothing else on the screen...
Soft reset, hard reset, reset network settings, backup and restore, so far none of these processes have helped. Neither has reactivating airplane mode, using the pop-up control center (it will light up the bluetooth B and say "bluetooth: on", but when I visually check on settings, it still says "off" and has the spinner instead of switch). I've even tried things like rebooting the phone with airplane mode on to see if that would help.
Due to bluetooth being down, the WiFi switch on it's second screen under settings is disabled and will not activate, even though the pop-up control panel will report the activation of WiFi as well just like it does bluetooth...
About phone will give me a hex bluetooth address, but wifi address is "N/A". The one time I found the diagnostics logs, I found a bunch of "bluetooth crashed" messages, cannot find them as of this writing again...
Not sure if this has any influence or not, but while I was in MA, at my mom's house who has a very old router, I used my iPad mini to do a Facetime call, and during said call my phone was "ringing" like it wanted to take the call, but I ignored it. WiFi seemed functional at my mom's house, my nephew had no problem playing angry birds before I left, but I didn't do anything else but imessage my wife and make a phone call at the airport until I landed in St. Louis, where I found the bluetooth non-functional. iPad is, as of this writing, still fully functional.

I have experienced the same problem and tackled the solutions in very much the same way but to no avail. Can anyone help as this is very annoying.

Is there an easy way to switch iPhone microphone input from headphones to Bluetooth and back?

When driving I plug my iPhone into the car stereo AUX jack with a cable to listen to music. To receive or make phone calls, or to use Siri, I use a Bluetooth (Jawbone) headset.
If I'm playing music out the headphone jack and then answer a call, when the call ends the music starts playing again through the Bluetooth headset, so I have to switch it back to headphones. Theoretically no big deal, since there's the little airplay icon at bottom right in most music apps. Still, I really wish it would revert to playing through the headphone jacks and I didn't have to do anything. Is that possible?
But it gets more annoying. Let's say I decide to use Siri and want to use the bluetooth. This is fine IF I plugged the headphones in before connecting Bluetooth, but for some reason it often seems to happen that it defaults to the headphone jack, especially if I've been messing with it a bit -- say I was listening to music, then received a call, then hung up, so now music plays through Bluetooth, so I hit the icon to switch music back to headphones, though sometimes this doesn't work and I have to unplug and replug in the headphones. But now usually if I want to use Siri, and I hold down the iPhone home button, or even if I hold down the jawbone button, it will often take input still from headphones.
I can't go into all the variations of this that happen, but almost every car ride there's a pain about this -- someone calls but even though I answer through my headset, the input is still from the headphone jack, and i have to scramble to get the call going through Bluetooth again. Or I have to unplug then replug the headphones after Siri use. None of this even covers something other, like dictating text or making a voice memo, something else that need simply but DOESN'T have an AirPlay-style button on bottom right like the music apps do. Really a pain.
Really wish there were some easy switch to toggle the input.
And again, really wish the music would just go back to playing where to was playing from (headphones) instead of making me switch it either via a button or through unplugging/replugging headphones.
Any solution to this?
Thanks.

Sometimes you turn off your Bluetooth and then back on and it doesn't reconnect with your phone unless you go into the menu. Either way doesn't help much if someone calls you while you're driving and you realize your iPhone is stuck on headphone input.

IOS 8, Bluetooth and Headphones

Similar Messages

Maybe you are looking for