IOS 8 Control Center and Notification Center not transparent?

I updated my iPhone 4S to IOS 8 and I have noticed that my friends Control Center, Notification Center and toolbar at the bottom are partially transparent but mine Control Center and toolbar are grey and Notification Center is black. I have tried many times turn on and off "reduce transparency". Is there another way to fix this?

If you go to Settings>General>Accessibility>Increase Contrast>Off it should change it. I had the same problem.

Similar Messages

How to activate control center and notification center in ios 8.1.3

I have iPhone 5s whit iOS 8.1.3, sometimes I can't access control center and notification center by sliding up or down on screen till I turn my device off and then turn it on. What is the problem?
Is it a bug in this version of iOS??? :-O

Go to Settings > General > Restrictions, make sure "Deleting Apps" did not get turned off.
If it is not a restrictions problem...
Try resetting:
Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

I HAVE IPHONE 4 i am facing 2 problems on the IOS 7 GM 1- I CAN'T SLIDE THE CONTROL CENTER AND NOTIFICATIONS CENTER UNTIL I MAKE RESTART 2- ONCE I RECEIVING CALL IF I PRESS TO REMIND ME LATER THE I PHONE MAKE RESTART SOMETIME

DEAR ALL,
I HAVE IPHONE 4 i am facing 2 problems on the IOS 7 GM 1- SOMETIME I CAN'T SLIDE THE CONTROL CENTER AND NOTIFICATIONS CENTER UNTIL I MAKE RESTART 2- ONCE I RECEIVING CALL IF I PRESS TO REMIND ME LATER THE I PHONE MAKE RESTART SOMETIME.
<Email Edited by Host>

Restore as a new device, then sync your apps and contacts.
Do not restore from backup.
If that does not resolve it, then the next step would be to visit the Genius bar at an Apple store.

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working. The only way I can fix it is by shutting down the phone. It will work for a while, then it won't.

The control centre and notification centre on my iPad 3 running iOS 7 is not translucent, The control centre and notification centre on my iPad 3 running iOS 7 is not translucent

Apple told us that in the new iOS 7, menus such as the control centre and notification will be translucent, and allows users to see to some extent content concealed behind the menus.
I've update my iPad 3 to iOS 7.0.3. The menus (Notification centre, Control centre etc...) are not translucent, at all.
Control centre is completely greyed out, and I can't see anything behind the menu when called up.
Notification centre is similarly completely blacked out, though to a small extent I can see some content behind notification centre.
I've seen in video reviews of iOS 7 that notification centre and control centre are both close to being clear, and take up the colour of content behind them.
My iPad 3 does not display such aesthetics.
I know that some of you will say that I should turn off 'increase contrast', but that's not the case, since I've already turned it off.
The issue was already present when I update from iOS 6 to iOS 7.0.2, and the problem was carried over to iOS 7.0.3, in which I thought the issue would be rectified.
Is anyone else finding this issue present on their devices?
Has anyone found a fix yet?
Thanks!

Sadly, the iPad 3rd Generation does not recieve the blur/translucency effects which you are mentioning in iOS 7. (The reasoning for this situation is most likely listed below.)
1.) The difference in processing power between the iPad 3rd generation & iPad 4th generation, (The 4th Generation recieves these visual capabillities while the iPad 3rd Generation isn't capable of producing the effects).
2.) Marketing issues in which Apple prefers consumers to purchase a newer model instead of something older.
Turning on the 'Increase Contrast' option is Settings will on make the Notification Center & Control Center completely opaque. This setting is used to make text legibillity higher.
I hope that this answers your question, if you have anymore questions, just ask. Enjoy your iPad (:

IOS 5.0.1 Notification Center not actually turned off, draining battery

Before iOS 5 upgrade, I deleted Trapster after use, and I would not receive any more alert.
After iOS 5 upgrade, I experienced crazy battery drainage. I turned off the diagnosis and usage, and chose Do Not Send. Not helpful to save battery life.
After iOS 5.0.1 upgrade, battery drainage has been varied between 8% to 15% per hour, even worse!
I found a few problems:
1. After using Trapster, and deleted it from memory, while the notification was set as OFF, though alert was set to Banner in the Notification Center, the Alerts still appear when Locked on. I changed the Alert from Banner to None, but without reset the iPhone, later in the day, Trapster still gave me a few banners alert, though it was not in the memory.
2. Sometimes my iPhone 4S has hot rim while no app in memory and in sleep mode, charging or non-charging. I ran System Activity Monitor app and found that 45%-65% CPU resources are being used. For no intervention at all, it will drop back to 2% to 5% after a few minutes and the battery dropped 5%- 15% within that period.
3. After taking photos with the Camera while Options HDR is ON, even though the Camera app was deleted, the iPhone 4S remains hot or even getting hotter. (Sometimes I could get the same result when tests were repeated but not always.)
I have 10 apps set ON at Notification Center, but Trapster is one of the 37 apps Not in Notification Center.
I am thinking that the Location Services (as in Camera) and Notification Center are not actually able to turn off, even though you may have actually turned them off.
I have 2 iPhone 4S. This is about the one upgraded from iPhone 3GS.
Another iPhone 4S, which upgraded from iPod 2G, has no battery drainage problem from day one.

Since I upgraded to iOS 5.0.1 I have a problem with the camera (no zoom). The iOS 5 has got many problems it appears.

Functionality of Profit Center and Cost Center

Hi,
I am unable to understand the functionality of Profit center and cost center, I know that cost center represents area within an organization for which you will like to see the expenses for a particular time period. for example in an organisation we have three cos centers Accounts, HR and Admin. whenever you post an accounting document in FI you will specify the cost center to which the expense relates. but in some cases when you post an expense and give the relative cost center the profit center is also driven by the system. why is this behavior? i mean i have posted an expense not an income then why is system driving the profit center as well?
Profit centers are used if you want to see the profit of different area of your organisation. in what kind of postings we use profit center? and if we could use profit center to draw income and loss for a specific area why do we need segment reporting? and what is the difference between Segment and Business area. what i understood from their definition is that they are both same and use for same purpose.
I am totally lost in these concepts. please some one help me out with an example. i am stuck at this point. some one please clarify my concept of Profit Center, Cost Center, Segments and business area please.

Hi,
Cost center & Profit Center are organizational units within the enterprise structure , created for better internal control.
As the name suggests Cost Center is the lowest level of the organizational unit representing a defined location of cost incurrence or otherwise to which you can meaningfully assign the cost(both direct & Indirect).
Profit Center is an organizational unit in accounting ,where management would require to see the profitability & fix the responsibility. It may be each plant/division of the company .
If you consider the Plant is the Profit center, you can take the various deptts in the Plant as cost centers. you can draw a balance sheet & profit & loss account statement at profit center level but this will be for your internal use.From this you can know the ROI on particular area. Profit centers are assigned inside the cost center so when you update cost center, profit centers are updated automatically.
Where as Segments are used for legal reporting of your accounting standard as per IFRS. Both Business Area & Segments are more or less same with some technical difference.
Business area is a free organizational unit. It can be derived through cost center or can be entered manually.
But segment is a dependent organizational unit. It is defined & attached inside the profit center master data. It can’t be entered manually.
SAP suggest to use the Segment concept.
Thanks & regards
Deepak

Cost center and profit center details

Hi All
Is there any function module or BAPI to obtain cost center and profit center details
for a GL account. Actually I am obtaining the carry forward balance for a
fiscal year from the table GLT0 but I am not getting the corresponding profit center
and cost center details.
Please suggest a way forward!
Regards
Ankit

Hi,
If you are getting data from GLT0 table, using the Account number go to SKA1/SKB1 tables and get the CostCenter(KOSTL) and Profit Center(PRCTR). If you want to get details about CostCenter, its master table is CSKS and master table for Profit Center is CEPC. you can get required info from these tables.
thanks,
sksingh

Cost Center, Work Center and Profit Center

Hi ALL,
Can any one please explain me the concept of Cost Center, Work Center and Profit Center.
And where and when do I assign the cost center???
Amit

Hi Check the following "
Cost centers represent areas of responsibility where costs are incurred or where responsibility for costs may be assigned. They represent the smallest unit of responsibility within the organizational structure of an enterprise.
A cost center can be pictured as a cost bucket such as a department, product line, production stage or geographical area.
An unlimited number of cost centers may be created.
All cost centers within on controlling area have to be assigned to a cost center hierarchy (standard hierarchy).
Costs originally posted to one cost center may be distributed and assessed to one or more other cost centers using allocations.
How are costs assigned/posted to a cost center?
External financial accounting documents created in FI, AM or MM that post to a G/L expense account can be configured to require a cost center assignment be entered at the time of transaction entry. The system automatically creates a parallel CO document that posts to the indicated cost center.
Cost elements master records can be configured to be posted to a certain cost center (automatic account assignment).
In addition, other non-financial activity (i.e., direct labor hours) may be posted directly to cost centers from within CO or via other modules such as PP or HR
chandra

Cost center and cost center group

hi,
how can i create cost center and cost center group?

hi,
after u enter in to sap easy access
goto Extras menu-settings->select display technical names
you can see the T.codes for each transaction
for example:create cost center
accounting>controling->cost center>master data>cost center>individual processing-->KS01-create

RE - Change profit center and cost center after LO activated

Hi ppl, One question. Is there any harm if we change the profit center and cost center of the business entity, building, rental unit only after the lease out has been activated?

No need to change the cost center, as you want to have valid from date as 01.10.2010.
Having profit center before that date is not an issue and does not have any negative impact.
Regards,
SDNer

Cost Center and Profit Center Planning

Hi,
I have one Co issue. Pls Suggest me the wiseful solution.
Cost Center and Profit Center Planning.
For F-2008 Planning data they have updated in the month of Aug, 07 for Profit and Loss Items and they have revised the plan data of some cost elements in the month of oct, 2007 (say 5% Increas). when comparing the cost center report to profit center report, both are not matching. the reason when i see and reconcile the document nos and values in between cost center and profit center reports i found out that there are some documents are missing in the profit center report.
wherever plan data had revised e.g for cost element Salaries they have updated 100000 Planning cost in the month of Aug, 07. In the month of Oct, 07 increased 5% i.e.5000. In cost center line items details i found 2 documents for Rs.100000/- and Rs.5000/- But in Profit Center Line Items i am getting only Rs.5000/- Value Document.
Note. As and when KP06 Plan data has been updated Profit Center line items are generating. It is not necessary to run any programme inorder to transfer Plan Data from cost center to profit center.
Observations From My Side:-
I tried to run the transaction code 1ke0. i have selected the cost object is Cost Center, version and had given Cost Center Parameter in development and quality clients and executed the same.By this time already existing data either deleting/ riversing and creating new documents fully except manually changed data in profit center through 7ke1.
My Question is
1.Upto what extent it will work.
2.will it be possible to transfer data from cost center to profit center only missing documents which are available in cost center, without disturbing of existing data in profit center.
3.suppose if i done this activity, there are some data which was already transferred from other cost objects like internatl orders & wbs elements to Profit Center. will the data get disturbed (deleted/riversed).
Pls suggest me the wiseful way to solve the

Hi
Try This
BAPI_COSTCENTER_CREATEMULTIPLE
BAPI_COSTCENTERGROUP_CREATE
BAPI_PROFITCENTER_CREATE
BAPI_PROFITCENTERGRP_CREATE.
Regards,
V.balaji
Reward if usefull

CO, which table decribes "cost center" and "cost center group"?

Hello experts,
now I have the transaction KP06. Maybe through customizing the user has built a "cost center group" for some "cost center".
In which table can I find out the relationship between the "cost center" and "cost center group" ?
Thanks.
RD
Edited by: Marching Dai on Jun 16, 2008 2:05 PM

Hi Arun,
Please check this link
http://www.erpgenie.com/abap/tables_fi.htm
Please check CKPE --->CO-PC Cost Object Hierarchy: Individual Objects
CSKA Cost Elements (Data Dependent on Chart of Accounts)
CSKB Cost Elements (Data Dependent on Controlling Area)
CSKR Resource master record
CSKS Cost Center Master Data
Best regards,

How to change the main work center and work center of each operation when generating work order by maintenance plan

Dear experts,
I face a problem that system get main work center from equipment master data as a default main work center in maintenance plan when creating maintenance plan. however, if main work center in equipment is changed later, the change will not synchronize to related maintenance plan. if work order is generated from maintenance plan, main work order in order is defaulted from maintenance plan instead of updated work center in equipment.
another problem is that, for those orders generated by maintenance plan, the work centers in operations is defaulted from task list in maintenance plan. in most case, work center in task list is dummy. Actually the work is done by work center in equipment master data.
My expectation is how to auto replace the main work center and work center of operations in work order with the one in equipment master data if order is generated by maintenance plan? is there any standard configuration or enhancement/BADi that can help with this requirement?
thanks！
Wesley

Wesley,
Sorry - development is the only way.
Another option is to create a batch program that runs before your IP30 run(s) and updates any maintenance items and task lists with the correct work centres.
PeteA

Changing cost center and profit center in already exsisting PR and PO

Hi friends,
In my ckient place we have created PR with account assignments- K,C,D,A and saved the pr. We are creating PO woth respect PR. then we did goods reciept also and some went upto to the stage of invoice verification. now my client likes to change the cost center and profit center they are using currently. they are interested to create new profit center and cost center.will this chnage will affect the already exsisting open PO(purchasing process not yet completed).
Is it possible to change the cost center and profit center in already exsisting and created PO and purchase request. will sap allow this.what can we do.please advice.
Thanks you in advance.
Regards,
willaim

William,
Once you will post the GR or Invoice system will not allow to change the account assignment data like Cost Center or profit center.
This is a standard SAP functionality

IOS 8 Control Center and Notification Center not transparent?

Similar Messages

Maybe you are looking for