IOS 8 + iPad 3 + Connect to iTunes + Stuck in Recovery Mode
Current issue
Went to apply iOS8 update to ipad and it began the update process over wifi
Screen went black after awhile, apple logo showed a few times, now stuck on connect to itunes logo.
Connected to iTunes and it says "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes"
Nothing is said about updating etc that has been mentioned.
Reiboot, recboot, etc none unlock it out of recovery mode.
Apple has pretty much bricked this ipad with the update. Anyone with a fix yet on this?
Got the same problem with the iPad 2.
Don't want to restore to factory settings and lose all my photos.
Apple S**ks!
Similar Messages
-
I have a 3gs, and I haven't updated it for a long time because I always have issues when I do. I tried to update the ios today, and it decided to update it to 6.1.3 instead of 7, I didn't think there would be a problem, so I clicked ok. When I came to check on my phone, itunes said there was an error with the update, and my phone was in recovery mode (plug-in sign on the screen). I looked up multiple things to try, I tried putting it in DFU mode, still itunes doesn't see it. The computer also doesn't list it under devices, however when it is plugged in the Apple Mobile Support USB Driver shows up in device manager. I have tried uninstalling itunes and reinstalling, still nothing. I just want to know if there is anything else I can try. Thanks.
No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.
-
Ipod not recognized in itunes, stuck in recovery mode (tried everything)
I've had my ipod touch for about a year now, and the other day itunes told me I needed to download the new software and such. FYI, I use Vista (unfortunately. Probably not helping with the problem).
I am aware that this is a common problem. I have *tried everything* I can find at the moment, when I plug it into a different laptop nothing happens.
- I download itunes 9 etc and suddenly it says "ERROR OCCURRED" or something, I don't remember the error message too well (sorry).
- This didn't surprise me, I am used to itunes/ipods messing up on me. So I wait a while, and download the new software again. It installs.
*- A screen on my ipod appears with the itunes logo, a usb cable and "itunes".*
- I connect the ipod to the laptop. Nothing happens. Vista pops up saying:
*'Windows needs to install driver software for your Apple Mobile Device (Recovery Mode)*
- Locate and Install driver software (recommended)
- > Ask me again later
- Don't show this message again for this device'
I click the first, it asks me for a disk {which obviously I don't have), when I click 'show me other options' it tells me it couldn't find driver software. Clicking on anything from here results in nothing or failure to find the driver or whatever.
*I've tried everything on this site including* rebooting, reinstalling, completely destroying any trace of itunes and associated programs on my computer (using Windows install cleanup too) and then installing again, manually disabling/enabling/repairing/everything else under the sun to the driver in the driver menu. The same thing happens every time.
So uh, any help? I've backed up everything on my harddrive so I'm open to practically anything. I'm so sick of errors with ipods, I've never had so much trouble with any other gadget ): Maybe I'm just cursed lol.After hours of searching for a fix I may have found one on a Mac Forum. This worked for mine but I had to restore it from the last back up. I also gave me the option of restore to new condition (out of hte box) but Ichoose from the last backup that itunes made. It took about 4 hours to fully restore all my 24gb of material. BUT,Now it's working perfectly. For how long...who knows?
Here's the link to the page where I found the info. http://forums.macrumors.com/showthread.php?t=447185
Below is the solution that worked for my 2nd gen 32 gig.
"Originally Posted by vegas-steven
try and do this:
1. start itunes.
2. plug the ipod into your computer
3. hold the power (on top) and home (on front) buttons for a few seconds.
the ipod should power up, and if if is screwed up, will be in recovery mode... from there itunes will tell you that it finds your ipod in that mode, and needs to restore it.
just click restore, sit back and it should work again.
did you hack it at all?
if you did not hack it, and that doesnt work, call applecare and see what they say. maybe it is faulty?
still, from my experience with my friends ipod that i made 100% unusable, there is a way to restore even the most broken ipod as long as it has a battery charge.
i suspect a small portion of the memory is dedicated to keeping emergency boot files that allowe you to restore, no matter how bad things get." -
IPhone 4S stuck in recovery mode while trying to upgrade to iOS 7.0.4
I ran into the issues with my iPhone 4S while trying to upgrade it it iOS 7.0.4 OTA and I have tried everything I can to recover it but no luck. I have tried different USB ports, different PCs altogether with av tuned off, and finally a MAC Pro this morning. I am stuck and miserable. I did everything that a number of forums have mentioned in terms of switching off anti-virus, clearing off host files, checking windows and mac firewall settings, setting the phone to DFU mode and trying over - you name it.
The error I run into most half way through the upgrade is "Unknown Error (29)". According to Apple (http://support.apple.com/kb/TS3694), it has to do with anti-virus but last night I spent 2 hours building an image with no av or firewall running and tried and still ran into the error. Even tried "Fix it" from Microsoft to clear off the host file configurations as prescribed.
Any help is welcome. Much needed.Hi, sorry for my late reply.
FIXED!!!! For me anyway, and I hope for you!
So I tried to update to ios 7 and after downloading the software itunes tried to update my iPad 3. I recieved the error 3004 and was stuck in the "Connect to iTunes" screen and
could not get out of it. Completely annoyed!
But then I remembered something from when I used to fiddle with iphones. I opened a program I had called TinyUmbrella, which can be used to force boot out of recovery mode (the
"connect to itunes" screen).
My ipad was still connected to itunes and in recovery mode. I opened TinyUmbrella, selected my ipad (which was just shown by the serial number), then clicked "Exit Recovery" and
BAM!!! It immediately kicked my out of the recovery screen and started my ipad back up to my home screen.
Now, my ipad was still on 6.1.3 since the update to ios 7 had failed. But I didn't care, my ipad was fully functional again just like I left it before. Thank God for
TinyUmbrella! Here's the CNET link for TinyUmbrella if you need it:
http://download.cnet.com/TinyUmbrella/3000-18545_4-75766724.html -
IOS 6.1 download problems - stuck in recovery mode
If your iPad, iPhone or iPod are stuck in recovery mode, try the following:
1. download the firmware for your device: http://www.ngbtips.com/download-links-ios-6-1-official-firmware.html
2. plug your device into a computer running iTunes
3. when the "restore device box" pops up, control click on button to restore
4. restore your device from the firmware you downloaded
Hope this helps!Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My iPhone 4 is stuck in recovery mode after attempt to upgrade iOS.
Help,
I have tried to update my iPhone 4 iOS to iOS7 and the iPhone is stuck in recovery mode.
I tried to hold the home button and the power button and restart it as it was written in may support forums but it did not help.
When I connected the iPhone to the iTunes I receives the follwong dialog box:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
When I press on the restore button I receive the following warning dialog box:
"Are you sure you want to restore the iPhone to its factory settings? All of your media and other data will be erased..."
Well, I have a lot of unbacked up data on my iPhone so I most defenitly don't want to delete it...
So, I am stuck. Can someone please assist me ?
ThanksYou need to Click that button to continue...
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766 -
I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings. My question: Can I restore from iTunes backup after restoring to factory settings?
Hi, kformagg
I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
It worked very well. -
I upgraded my iphone4 wirelessly to iOS 5.1 and now I'm stuck in recovery mode and when I try and restore my phone it gives me error code (1) At this point,
I want a working phone. Any ideas?download a program called RecBoot, very easy to use, connect your iphone and click on "exit recovery mode" and it will restart normally. I had the same problem as you, but I solved it with this program.
-
Hi!
I downloaded iOS7 via a Wi-Fi network earlier today, and I've been waiting to install it until recently. However, I was having a couple errors when I tried installing it, so I turned it off and back on again, and it started installing just fine.
However, after a while, the iPhone 4 went into recovery mode (http://support.apple.com/kb/HT1808) and I attempted to restore it on iTunes 11.1. The problem is that when the "iPhone Software Update" file finishes downloading, iTunes gives me the notification that my "iPhone is in recovery mode. You must restore this iPhone before it can be used with iTunes." all over again.
I've repeated this process three times now. If anyone could give any assistance it'd be most helpful.
Thanks!FIXED!!!! For me anyway, and I hope for you!
So I tried to update to ios 7 and after downloading the software itunes tried to update my iPad 3. I recieved the error 3004 and was stuck in the "Connect to iTunes" screen and could not get out of it. Completely annoyed!
But then I remembered something from when I used to fiddle with iphones. I opened a program I had called TinyUmbrella, which can be used to force boot out of recovery mode (the "connect to itunes" screen).
My ipad was still connected to itunes and in recovery mode. I opened TinyUmbrella, selected my ipad (which was just shown by the serial number), then clicked "Exit Recovery" and BAM!!! It immediately kicked my out of the recovery screen and started my ipad back up to my home screen.
Now, my ipad was still on 6.1.3 since the update to ios 7 had failed. But I didn't care, my ipad was fully functional again just like I left it before. Thank God for TinyUmbrella! Here's the CNET link for TinyUmbrella if you need it:
http://download.cnet.com/TinyUmbrella/3000-18545_4-75766724.html -
IPhone 5 stuck in recovery mode while upgrading
While upgrading my iPhone 5 to ios 8.0.2, my phone got stuck in recovery mode. Tried with iTunes and it says it is still in recovery mode. First complete it and then connect with iTunes. Finally got Error message 3194. I am using latest iTunes. Phone is stuck with iTunes and connector symbol on the screen.
Me too. I now have to restore my entire phone and lost a whole bunch of info. So angry with Apple lately.
As an owner of all Apple products for computing and mobile since the 90's, I am starting to think about moving to Samsung phones. Apple is lacking in innovation and their products (and software) aren't the same quality. So sad. -
Ipad mini stuck in recovery mode.
My itunes is up-to-date.
Sudo nano command is not working.yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.
-
I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.
yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.
-
My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
Or any other suggestions please? ThanksAs pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.
-
After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server. I have already tried the resetting with power swich and home button and plugging into computer but it says the "iPhone software update server cannot be contacted." I am locked out of my phone. Does anyone have any idea how to resolve this issue and get the phone working again. I will add that I am now trying to restore it on a different computer with a lower version of itunes, but the computer that it initially happened on had the updated itunes and gave me the same result ... nothing. Thanks for your help in advance.
Try going to recovery mode as described here. You may have to try this more than once to succeed.
Use the original iTunes that the iPhone synced with.
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?
-
Graphics card upgrade for HP Pavilion a1020n
Hi Everyone! I need to upgrade the Graphics card in my HP Pavilion a1020n for windows 7 Aero or windows 8. i need the graphics card to run Minecraft,Roblox,The Sims 3, Roller coaster tycoon 3, decently. Thanks This question was solved. View Solution.
-
Pls help me with this installation problem. Your advice is highly needed.
I am installing oracle 11.1.6.0 on windows xp professional everything was going fine untill there was a pop up that reads below INFO: exit-tool: Launch browser INFO: saving exit only tools ... INFO: no detached only tools in this session INFO: exit-o
-
The app is in the store. Now what?
Hi, Finally I wrote my first iPhone application. Apple approved it and now my child is in App Store since today. There are no reviews, no buyers, no nothing. What are the steps to get the reviews from people to promote my app? I am planning to strip
-
Convert from sybase bcp to sql*loader
I'm an oracle newbie. (Oracle 8i, HP Unix) Is there any way to convert sybase bcp format files into sql*loader control files? If not is there any way to take an existing table description and generate a sql*loader control file from it? If anyone has