IOS 8 reminders stuck with geofence
After updating to iOS 8 and creating one reminder with a geofence and then marking it done, the location services icon at the top of my iPhone 5 is now showing all the time (the outline icon).
I've gone into Location Services and turned each item off and then on one by one. Reminders is the app that's causing the icon to show and I'm definitely seeing an impact on my battery. I have no reminders left on the list I use.
Anyone else?
I am having exactly the same problem. I am wondering if this is a bug in iOS 8 or if there's any other solution.
Mark
Similar Messages
-
Ipad 2 ios 8 update stuck on Apple with progress bar
Hello,
I'm from Paris and I didn't find any solution around me.
So, I hope you'll help me to find something. Sorry in advance for mistakes. My english isn't perfect.
Yesterday, I tried to update my Ipad 2 to iOS 8 in OTA way.
Everything was going fine until the Ipad rebooted. Since this step, the Ipad stucks on the famous Apple with a progress bar under. The progress bar is 30% filled.
I tried to put my Ipad in DFU mode and it doesn't works.
The Ipad switch off few seconds and it switch on back in the state describes before.
Could you please heeeeeelp me.i have the same problem, my ipad 2 ios 8 update: stuck with apple logo refreshing every 2 minutes or so with the black screen (like the one for boot up or reset) but not turning on or connecting to itunes. plugged it in to the computer for an itunes connect to do a hard reboot and the device shows up in grey (meaning i cannot click on it) for a minute while the ipad cycles with the apple logo. the device showing in itunes then disappears and the whole cycle starts over and over again. yes, please help!
update: ok so another member suggested this and it is working so far, although my data will be lost...it is what it is:
DiavonexFeb 5, 2014 9:46 PM Re: Unable to start my Ipad 2 after upgrading to Ios 7.04 . The screen is stuck with the start up apple logo till full discharge. Please help.
Re: Unable to start my Ipad 2 after upgrading to Ios 7.04 . The screen is stuck with the start up apple logo till full discharge. Please help.in response to Pratik Nayak
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
Can somebody help me install IOS 6.1.3 back to my iPhone 4. IOS 7 or 7.0.4 is not smooth enough as perfect as IOS 6.1.3. I am stuck with this OS, every app gives a break for 4-5 seconds to open up. And playing games in this OS using iPhone 4 is really crazy. Very much disappointed that I am not able to use IOS 7 and cant go back to what I need.
Mani Dinesh wrote:
Can somebody help me install IOS 6.1.3 back to my iPhone 4.
Downgrading is not supported by Apple.
Mani Dinesh wrote:
...every app gives a break for 4-5 seconds to open up. ...
See this discussion...
https://discussions.apple.com/message/23731048#23731048 -
Now that iOS is consistently being updated. Will the 1st Generation IPad be stuck with IOS 5? Eventually my IPad will be good for nothing as Apps start requiring the updated software.
The iPad 1 can only be updated to iOS 5.1.1. This is unlikely to change.
The apps you have will continue to work and there are still many apps which run on iOS 5 (or even earlier iOS levels). -
I PURCHASED IOS 3.1.1 ABOUT 2 OR 3 YEARS AGO WHEN I GOT THE IPOD, I SWAPPED MY OLD I TOUCH AT THE GENIUS BAR AT THE APPLE STORE, SO NOW IM STUCK WITH 1..1.5. HOW CAN I REDEEM THE UPDATE I BOUGHT ON THIS NEW SWAPPED OUT?
Contact iTunes
Apple - Support - iTunes Store - Contact Us
If you have the same computer on which you originally did theupdate, have you trued restoring the iPod? The 3.1.1 update should stillbe on yur computer. It is located here on a PC
ipsw location -
My iPhone 4 with iOS 5, is stuck in the Facebook app and not able to do any operation.. Im not even able to go to Home. I connected to iTunes in my PC, it was not able to sync. I tried calling my number from other phone, but it went to voice mail.
Hold the Lock & Home buttons simultaneously for 10-15 seconds until the phone restarts and you see the Apple logo. You will not lose any data.
-
Can somebody help ???
iPhone 3Gs is stuck with an apple logo with the long loading bar. but iTunes popup say iPhone had been restored. This happens when upgrading iOS 4.3.3 to 4.3.4.Thanks for your answer
i've checked the host files, nothing referring to apple. The device has never been jailbroken...
Is there something else i can do? -
I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP
The typical fix if the progress bar totally freezes - meaning no movement at all for more than 20 minutes - and iTunes will no recognize the device - is to try to put the iPad into recovery mode. That is explained here.
iPad: Unable to update or restore
However, don't jump the gun. Keep an eye on the progress bar and if it is moving at all - even very slowly - let it go for a while. I'm updating my iPod touch first and the progress bar is moving but very slowly. -
I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work
So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
Reboot both the computer and the phone and try again. -
i had an request yesterday to update ios7 i did this and now my phone seems to be stuck with the picture on the screen of the charger pointing to the symbol i tunes. i cannot tap the screen to go anywhere else and even if i connect to my laptop via the usb still nothing. can anyone help plz
Hey robthetiler!
Try the steps in the following article to resolve this issue:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Ios 7.1 update interrupted, phone stuck with apple logo
My husband just bought a new 5s today and was updating to ios 7.1 while plugged into his Mac. He knocked the phone off the desk as it was updating and it came unplugged. Now the phone is stuck with the apple logo on the screen with the progress bar below it. He can't shut it off and iTunes doesn't recognize it when he plugged it back in.
What should we try in order to restore it to functioning again?
He's pretty p*ssed at himself right now and is phone less. Not real pleasant around here. <g>
Thanks for any help you can give me.
PaulaTry this:
Connect the phone to the computer. Hold the home and power buttons at the same time until the screen goes black and then the Apple logo reappears. At this point, release the power button but continue holding the home button. iTunes should pop up telling you it detected an iPhone in Recovery Mode. Follow the prompts to restore. -
App will not download to iPad when purchased from App Store - stuck with Cloud icon
Device : iPad Air 32gb wi-fi model (not cellular data)
OS version : 7.1.1 (up to date)
Location : UK
Problem : App will not download to iPad when purchased from App Store - stuck with Cloud icon
Last night I tried to download an app over wi-fi onto my iPad Air, but the app did not install.
I have plenty of space (the app is 24.1mb, I have 3.4gb free space) and there are no restrictions whatsoever on my iPad - no blocks on App store purchases, no age-related restrictions, no country restrictions etc.
Normally from the App Store page you would tap the price (in this case the app was free), enter your iTunes password, and the app would download.
Also a new icon appears on the home screen and a circle shows the progress of the download.
However this did not happen.
Instead I have the Cloud icon (the one that shows when you have bought an app but it is not currently installed on your device) and a message that says "You've already purchased this, so it will be downloaded now at no additional cost".
If I press OK I am then prompted to enter my iTunes password, the Cloud symbol briefly changes to a circle (and I mean for a split-second, like the blink of an eye) and then the Cloud symbol appears again.
The app does not download - in fact it does not even *attempt* to download.
I have tried this >20 times now and it always occurs excatly like this.
After Googling this problem (which seems common) and reading over a dozen threads on this forum plus Apple's own official support pages, this is what I've tried:
I can re-download other apps that I have previously purchased on this iPad, with no problems.
I purchased another app on my iPhone 5 and was then able to download onto my iPad with no problems.
I have reset my iPad >5 times - both by pressing/holding the home/power buttons, and also a full switch off and restart.
I have logged out of my iTunes account on the iPad, and logged back in.
The wi-fi is Virgin Media fibre optic broadband with a verified speed of 20 meg (confirmed by Speedtest) plus an 802.11-n Belkin router and my iPad will happily load web pages, stream videos on YouTube, download other apps etc.
I have reset/rebooted my internet connection
In an attempt to eliminate by broadband connection from the possible causes, I have switched off my router, linked my iPad to the hotspot feature on my iPhone and tried to download the app over cellular data, but still cannot download the app.
I have tried on 2 other wi-fi networks but still cannot download this one app.
My iTunes account has a cerdit balance from an iTunes card, but the app was free anyway
Nothing I try will download the app in question.
The app is iPad only, so I cannot install on my iPhone to try and kick-start the process.
I guess I could install the app on my computer and then sync the iPad, but that's *working around* the problem - it's not *fixing* the problem.
(Since getting the iPad I use almost never use my computer. And anyway what if I did not have a computer? Didn't iOS go "PC-free" with version 5?)
I would like to call Apple but my 90-day telephone support has expired (the iPad is around 6 months old) and I don't want to buy Apple Care for this one problem.
I can't make it to an Apple Store to speak to a Genius.
Bearing in mind the list of things I've already tried, what do I do next?
Thanks in advance for any support.Hi there.
Thank you very much for your quick reply, it's really appreciated.
No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
I guess I need to fire up my PC and download it / sync my iPad.
Thanks again for your help -
IOS 7 Calendar stuck on September. View won't refresh.
Calendar on iOS 7 is stuck on september. On monthly view, it won't refresh the view past September. I can scroll down, but it will get stuck on Ocotber, with an empty view. If I click year view, it freezes. I've tried restarting the app, the phone and nothing. I will try restoring the iPhone to see if that helps.
But if any of you had a similar experience, and solved it, let me know.
Thanks.
PS: This is happening in my iPhone 5 and 4s.When you restarted the app did you quit it first?
I would first quit the app then reset the phone.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app.
Then press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
Hi
I have an iPad mini and it was on iOS 6.1.3, my friend came and he said that he knows how to install iOS 7 for me. I gave it to him and he tried to install it, but apparently he failed to do so and an "Activation Error" is appearing on the screen now asking me to register in the developers program.
Now, we are trying to restore it back to iOS 6.1.3 using iTunes, the software downloads well and it starts restoring but that I keep getting this error message "The iPad could not be restored because the firmware file was corrupt.".
I am sure that the file is not corrupted because it's downloaded via iTunes regular download and it's not from an outside source.
I am stuck with this now and my iPad is useless this way.
Please any suggestions ?basselsamo wrote:
Please any suggestions ?
Yes, don't download Beta Software that you have no business or legal right to download and quit taking bad advice from friends.
Now to maybe get you out of the restoring jam, the only thing that I can think of that might work is to use recovery mode, unless you already tried it and it didn't work.
You can read about it here, but the instructions are posted below.
http://support.apple.com/kb/ht4097
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
i have an ippd touch 2g , a part of my keyboard won't work , i can type letters but i can't type numbers . please help i'm stuck with emojis keyboard
Try restarting the iPod by holding down the lock and home button together and then slide the power button to turn it off and then wait 10 seconds and start it up again. If it is not a reset issue then it may be a hardware issue. Is your iPod damaged or have you dropped it recently? If it is a hardware problem then you may not be able to fix it. If your iPod has multitasking options like the new iOS devices, close out the app and then try again, it should reset your device to letters instead of emojis.
Maybe you are looking for
-
Configuration settings for FTPES
Hi all, did anyone successfully connect to an FTPES server by the file adapter. I have configured successfully a connection to a FTPS server in the past, but the connection to an FTPES server is failing all the time. Is FTPES really supported by the
-
Show all rows in a dataTable - XSD datasource
Hi I have designed a report in CR2008 and my datasource for the report is an XSD file. There are 2 tables Table A and B. Table A is as follows: AID Name Reference Period Manager 5 Name 1 Ref 1 July 2009 Use
-
Hi all.... i am trying to build a web service using oracle jdev 10.1.3. i have built a simple java class that return common type such as String, int, long and publish theses method as web service and it works successfully...... but when i tried to bu
-
Data columns overflow when viewing in HTML or infoview
Hopefully there's a simple answer for this. I have several reports created in Crystal 2008 or XI R2 that sporadically display data incorrectly when viewed via either HTML view or published to BOE XI 3.1 and viewed in infoview. The symptom is when da
-
I was considering iPhoto on my MacPro3,1 under Mountain Lion (and later, Mavericks) but most of the 32-bit software I use crashes when I use a USB switch. Is Iphoto a 32-bit application like iMovie or is it 64-bit?