IOS 9 Public beta and Wifi Calling

Posting to see if anyone is having the same issue, when receiving calls whilst on WiFi calling it doesn't ring, I get a call failed message and then a message informing me of a missed call, without my phone ringing.
On the callers end it rings once apparently and goes directly to voicemail.

It's a beta don't expect it not to have issues.

Similar Messages

  • IOS 8: T-Mobile WiFi Calling on 5s issues

    Is anyone out there having problems with WiFi calling w/ their iPhone on T-Mobile?
    I updated my Wife's 5s to iOS 8, and enabled the feature in settings because we suffer from terrible calling performance on T-Mobile (1 maybe 2 bars of signal) in our home. She still drops calls regularly. I dropped a call three times while speaking with T-Mo support about it last night.
    They told me that they had to provision the feature on the account, which they did a couple of days ago, but even after doing so, it still doesn't seem to be working. How can I tell if the iPhone is using WiFi on a call? Is there an option to force it to use WiFi for calls?
    I have an (older, rectangle 2nd gen) Time Capsule in bridge mode that serves WiFi to the house, but I don't think it is the issue because other wireless devices work just fine and I have no other WiFi issues. Also, the other phones on our T-Mobile account are all Android phones that support WiFi calling and they all seem to be working flawlessly with WiFi calling and indicate when the phone is placing the call over WiFi.
    So, aside from using a different WiFi base station (such as T-Mobile's new WiFi router - which I won't do unless it supports bridge mode because I have a much more robust Cisco firewall doing the routing) I can only conclude this is an Apple/T-Mobile issue with their implementation of WiFi calling.
    Just wondered what other iOS 8 & T-Mobile users were seeing with WiFi calling.
    Thanks in advance, any helpful info would be appreciated.
    -Rob

    @chattphotos: I didn't try pingtest, but with all due respect, I don't see the point. A connection with a 10ms ping and 100 down and 4 up should PLENTY!
    @Hofstrajet: My wife's phone shows the same as the screenshot you posted. It definitely says T-Mobile Wifi
    @Prelude_007 When you say you can connect at home, does that mean you can somehow make WiFi calls there? How do you know the call is actually going over WiFi from home and not Cellular? What is your cell signal like at home? At your work, it might not work because they probably are more restrictive with what kinds of traffic they will allow. It could be that your IT staff have firewall rules preventing anything but web and email traffic to pass. I am sure this VoIP protocol uses some different ports, but I haven't seen the details on how it was implemented yet.
    My thoughts at this moment is that either there is an issue in iOS that may or may not be limited to the 5s, or that T-Mobile still needs to do something on their end.
    The only thing I have left to try on my end is a different WiFi access point. but given that my Samsung Note 3, my son's Note 3, and another Galaxy S5 all have NO PROBLEMS making/taking WiFi calls, it has to be an Apple <-> T-Mobile issue.

  • Safari 4 Public Beta and plugin problems

    At the risk of provoking the wagging of many fingers and the raising of many more eyebrows all wondering what was I thinking when I installed a public beta of anything on my editing system I feel (sheepishly) compelled to report that the installation of Safari 4 Public Beta disabled some - but not all - of my Noise Industries FX Factory Pro plugins. Naturally, in the middle of a project. And of course, this took me quite a long time to figure out. And you guessed it, I did multiple reinstallations of FX Factory 2.0.3 (I'm on OS 10.4.11), FCS2 and the OS itself.
    After some serious Googling I happened to discover that back in July 2008 some developers working with very early versions of Safari 4 reported plugin conflicts. And the moral of the story is....

    David, you're absolutely right. However, I can report that Safari 4 does have a lot of great features. Your turn to try out the next version.
    null

  • Installed iOS 5.0 and wifi will not stay up on my phone and only way to reset it is power reset my wireless router? Please help this is driving me mad!!!!

    Have iPhone 4 just installed iOS 5.0.1 and wifi will not
    Stay up on my phone even though router is 10 feet away
    And cannot recover wifi except by resetting router never. Asks for
    PW etc? Plus battery life is reduced on this iOS?

    Try a SMC reset:
    http://support.apple.com/kb/HT3964
    Try a NVRAM/PRAM reset:
    http://support.apple.com/kb/HT1379
    If no joy, take it back, and take full advantage of your warranty!
    You also may want to let Apple know about this as well:
    http://www.apple.com/feedback//
    I wish you the best

  • S6 IPSec Service Data Storage and WiFi Calling

    Hi,
    Can any other S6 owners tell me the storage size of the IPSec Service application.
    Then can you tell me if you have wifi calling enabled.
    I am getting the run around between EE and Samsung as I think there is a data leak in the wifi calling.
    My IPSec Service application is taking up 5.16GB and there is no way to clean this other than a phone reset.
    Cheers
    Ian

    I have the same issue. Only 1.6gb though. I heard this is some sort of memory leak and 5.1.1 should fix this issue. But being EE and a Samsung device, who knows when the update will arrive! 

  • S6 IPSec Service Storage and WiFi Calling

    Hi,
    Can any other S6 owners tell me the storage size of the IPSec Service application.
    Then can you tell me if you have wifi calling enabled.
    I am getting the run around between EE and Samsung as I think there is a data leak in the wifi calling.
    My IPSec Service application is taking up 5.16GB and there is no way to clean this other than a phone reset.
    Cheers
    Ian

    Same issue, ipsec service is growing.I've got Wifi Calling enabled. 

  • Infinity and Wifi Calling on Orange

    Has anybody else had issues with Wifi calling on Infinity? Using Blackberry Bold 9900 on Orange/EE. No problems before upgrade.

    Yes I was on ADSL before and yes it was with BT.  The router was a Zyxel rather than a BT one.   I've tried all week with wifi calling and it is certainly not usable, because of break-up of speech.
    I only got wifi calling on this Blackberry when they upgraded the software to 7.1 a few months ago, and it has been a revolution in mobile reception at home, which used to be very dodgy. 
    The download speed of web pages onto the phone through the wifi connection is excellent, because I can do that just fine with the mobile phone connection turned off and only the wifi connection live.

  • If i made a back up of an ios 7 beta and downgraded could i reinstall it on to the full version

    I recently made an ios 7 beta backup on my laptop and downgraded to ios 6. This wiped my phone and i was just wandering if when the full release of ios 7 came out the back up could be put onto that.
    Any help would be great!!

    Free? The updates are always free. What you really mean is "you have an illegal bootleg copy"

  • HT201210 I had the ios 7 beta and now I cant figure out how to get the real update

    I have the IOS 7 beta currently on my phone however now I can't figure out how to get the real update

    Be sure to log into developer.apple.com using your developer ID. there should be support on these issues.

  • I have ios 7 beta and wish to upload to the public version

    I get "My device isn't able for the requested build" and i've tried everything including changing my hosts file. Please help

    Login to the developer site for help. If you are not a developer, you cannot get help here.

  • IPhone 4, iOS 6 update, and wifi - cannot browse WWW via DNS

    Apologies for the long post in advance. Hopefully it's exhaustive enough for Apple to take notice.
    tl;dr:
    updated iPhone 4 (VZW) to iOS 6 on home wi-fi. now phone will not browse to WWW on home wi-fi, EXCEPT WHEN BYPASSING DNS (ie, browsing by IP address). tried lots. no success
    full events detail:
    I updated my iPhone 4 to iOS 6 yesterday evening (via iTunes on my Win 7 x64 PC). Upon completion, I ran into some trouble trying to sign in with my AppleID in order to restore from my iCloud backup. Suspecting that Apple's servers were just experiencing trouble (though nothing indicated iCloud was down), I skipped signing in and went about my day. The rest of my settings copied across from my computer. At that point, I slept on it.
    The following morning (today), I noticed that I still could not sign in, but was off to work and did not have time to examine it further. At the office, all seemed well, and I used the phone with the updated OS largely without issue, including connecting to two new wifi networks. Returning home, however, I noticed that the behavior was the same as the previous evening, ie I could not connect to things like the App Store in order to install updates, the web to look for information, etc. Now having time to troubleshoot, I pressed forward with the investigation and immediately found a number of support community and web threads detailing wi-fi issues on devices after updating to iOS 6. I followed the steps I found, but I still have the same issue. Below is the list of things I've attempted, to the best of my ability to recollect.
    1. forget network, rejoin - same symptoms
    2. power off phone, power on - same symptoms
    3. set wi-fi network HTTP proxy to Auto - same symptoms
    3. forget network, power off wi-fi, power off cellular data, power on wi-fi, rejoin network (same symptoms), power on cellular data (same symptoms)
    4. power off bluetooth (already done, no change), power on bluetooth - same symptoms
    5. forget network, airplane mode on, power on wi-fi, rejoin network - same symptoms
    6. clear cookies, cache, website data - same symptoms
    7. try another browser (Opera) - same symptoms
    8. try static IP on wi-fi network - same symptoms
    9. forget network, power off router, turn off wi-fi, power off phone, power on phone, reset network settings, power on wi-fi, power on router (after 5+ mins), rejoin - same symptoms
    10. restore phone to factory defaults (same symptoms) and restore from backup (same symptoms)
    11. enable SSID broadcast on router - same symptoms
    12. enable WMM on 802.1n router - already enabled, same symptoms
    13. disable 40MHz channels on 802.1n router - same symptoms
    14. set router to 802.1g operation - same symptoms
    15. remove wireless security from wi-fi network - same symptoms
    16. change SSID - same symptoms
    17. update router firmware - no updates available, also, same router was working prior to update and continues to work without trouble with all other wi-fi devices in the house
    18. try another router - already verified this works, but as a result of the particulars of this case, is not relevant as my home router is not at fault, so much as the update to iOS 6 is on my iPhone 4. as other routers work and as a factory restore did not resolve (prior to backup restoration), I also do not believe my iPhone 4 to be at fault, so much as the software update itself
    Having exhausted all of those suggestions, I dug further. The phone was working without issue up until the moment it needed to reboot to apply the downloaded iOS 6 update. I initially encountered the incorrect password scenario during the post-update configuration, but after forgetting and setting up the wireless profile from scratch (from the iOS 6 setup wizard), it joined my wi-fi network. The phone DID pull an IP address from my router, and responded to pings from other devices on my network without issue. In addition, using the Safari browser to web to a local network device, such as my router, was successful, indicating that the wi-fi network was established and routing appropriately. All other devices on the network, wired or otherwise, were working without issue. I then attempted to trace traffic and found that none of my phone's web requests were reaching my router, except for those targeted at the LAN. I then tried browsing to an IP to ensure there was not a DNS issue, and my phone browsed successfully. I then tried another site by domain name and failed, and then its IP and was successful. I verified against my router's logs that the web requests were routing through it to ensure that my cellular data wasn't taking over, and the logs confirmed it. At that point, I tried changing DNS from my standard servers to another set, but the behavior remained the same. I then tried setting my router as the DNS server, but the issue remained.
    In conclusion, it appears to be some sort of DNS issue specific to the update. I would also hazard a guess that this is impacting people on the networks where they downloaded the update and/or were connected when the phone actually updated. I've tried setting the profile to use local, ISP, and public DNS servers, but as the requests never reach my router, I am inclined to believe it's being restricted by a setting on the phone itself. Because the problem persists through a factory restore, it would seem to point to all data not being truly erased during that process. Recall that I'm having the same issue prior to a backup being restored to the device, and that this issue prevents iCloud from being accessed during the setup process while on the problematic wi-fi network, so that should rule out the backup playing any part in the trouble.
    Any thoughts?

    The OP is correct, I have done many tests.  With IOS6 there appears to be a dns issue in some cases with IOS for both ipad(2) at lease (my wife won't let me upgrade here v1) and the iPhone4s in my case.  Pretty easy to diagonse, I wish Apple would fix it.
    1.) I use a Juniper 5GT wireless firewall and all of my other devices (many apple, ipad, MBP, iMAC,3 ipods etc) are fine: Not ipad2 or iphone4s running IOS6
    2.) after upgrade nothing worked.  narrowed it down by messing with dns (I have my own dns server)
    3.) Strange thing; dns works over MiFI (Verizon) and Carrier
    4.) confirmed that it is a dns and not network issue.
    -down load free tool called ping-scope-lite.   (obviously you need to turn off wifi to do this)
      http://itunes.apple.com/us/app/ping-scope-lite/id431500107?mt=8
    turn on wifi
    - ping Level3 dns server 4.2.2.2 or Googlesdns servers 8.8.8.8 or 8.8.4.4 these worked.
    -now ping by name google.com or ipchicken.com
       - try others; same result.
    Apple did say that they would give me another iphone 4s: I just wasn't sure that would fix my issue.  I tried downgrading to 5.1.1 but I got an error saying my device wasn't able to do so (tried even blocking itunes from contacting Apple)  I whis this could be fixed.  I did even have it working using my own dns server but now I can see that my phone over wifi isn't even trying to make a dns request now.
    Stuck

  • I upgraded my first gen iPad to iOS 5.1 and wifi no longer works.

    This is the weirdest problem.  I can see the networks available.  I appear to connect to them, and can see signal strength bars.  When I try to use that connection, nothing works.  I can't access URLs through safari, I can't get to YouTube or iTunes, I can't download email ... nothing.  I've tried this on multiple networks and all are the same.  Does anyone have any suggestions for a fix ... Or a way to revert to 5.0.1? 
    BTW, 3G works just fine, but I have to disable wifi in order to drop back into 3G mode.

    I just updated my original iPad 32 GB WiFi to iOS 5.1 about fifteen minutes ago.  But I did it with the system restore feature in iTunes.  So it wiped out everything on my iPad.  But it did work.  Then I restored an earlier backup and all went fine.  Maybe you could try backing up your iPad and then using Restore to get it back to factory settings to see what happens. 

  • Ios 8.02 and wifi

    The update  to ios 8.02 still hasnt fix the problem of dropping the 5 ghz band on my wifi. This started in the original release of ios 8. Never happened on ios 7.

    Same issue here. iPad Air, WiFi, iOS 8.0.2.
    Other devices within a few feet have no trouble whatsoever, and my iPad shows a good signal, but throughput drops to nothing at random intervals. This only started a couple of days ago after updating from the last version of iOS 7  to 8.0.2.
    The solution is NOT in the generic "WiFi Troubleshooting" link above, all of which I've tried several times as a matter of course. Also tried switching from 5GHz to 2.4 GHz band, which had no effect. And it's an intermittent problem, so of course it would be very difficult to replicate in a support environment.
    100% certain it's not the router. And while there's a chance it *could* be a hardware issue with the iPad, that'd be a mighty big coincidence for it to have started after updating to iOS 8.0.2.

  • IOS 8 network and wifi

    Hi
    I am using iOS 8 on my iPhone 5s since yesterday and it seems that my network is slower than it should be, over wifi and cellular. Does anyone has the same issue?

    I am experiencing slow internet on my iPhone 5 too. Everything else seems quicker. I'm gonna try clearing cookies and cache from safari.
    iPhone 5c, iOS 8.0

  • Update iOS 8.3 and wifi is not known anymore

    after installing the 8.3 update my home wifi is no longer working and visible on my iphone 6 and my iphone 5s . other people do see the network. On my ipad which has  not been updated also still sees the home wifi . How can this be solved ?

    Hallo ,
    Is there anyone at Apple that can help me as I have huge !!!!! problems with iOS8.3 and want the problems solved .
    I have heard so many more people with also problems .  Please help !!!

Maybe you are looking for

  • Calendar Program Question

    Hello! Among the lab assignments I have done for my class, I have this calendar project I've been working on for a good while now. My only question is how do I set the days of the month properly with the empty columns I have encoded in the program? T

  • Invalid Table Name in query

    Hello, I'm trying to create a report on a table name that is in an item. This is the simple query I'm using for the report: Select * from :P9_MERGE_TABLE; I get an Invalid Table Name error. Is there any way I can build the query to get around this pr

  • Blanket sales Order's number missing on Sales orders releases

    Hello, i noticed that when u make a sales order based upon a blanket sales order (or just a release that is nearly the same), on the order header (or lines) there isn't any notice about the blanket sales order whom this sales order is referred to. Do

  • Opening a web overlay frame via button press (and closing it again)

    Hi all Is the following possible: Push a button A web content overlay window opens, displaying the web-based content within the frame (in this case, a URL pasted in from a google mobile search result). This window is smaller than the normal page size

  • La commande STAT à échoué: failed to lock or parse or multiple access

    Hi, I installed Thunderbird 24.4.0 and configured an account in IMAP and everything went fine. Then I configured that same account in POP3 and I'm having the message: "La commande STAT a échoué. Erreur lors de la récupération des tailles et du nombre