IOS Air (13 beta) localization of names not working
Has anyone tried to release an app with differrent names lately?
For some reasons the main app name <filename> is not used when a different localization (that is not supported by the app) is used. The localizations within the app run fine, but the file name is wrong...
This was working a couple of releases before. Has anyone seen this behavior as well and maybe found a way to get the right file name displayed on the device?
Best,
Josh
Hello Developers,
I would like to localize the name ONLY for an app I created in the xml file. For example, if I localize the name in English and Spanish, what name would appear for someone viewing the app in the AppStore in Italy? Would it default to English?
As well, from Flash Pro 6, do I need to select Spanish and English in the Languages area, even if I am only localizing the name.
Thank you,
Justin
Similar Messages
-
I cannot connect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to type my user name /password and nothing happens afterwards. No error messages either.
hey the sever is down for the moment try again latter tonight... we have been attepting and i eveen went to the apple store third Street Primonade and alejadnro could not help me he said to try soon
John -
After updating my iphone 6 to ios 8.0.2, the iphone is not working at all!!
after updating my iphone 6 to ios 8.0.2, the iphone is not working at all!! the apple logo shows up for a few seconds. then the screen goes red !! after it restarts and it do the same!! please help.
Well, just for future reference, any time you do an iOS upgrade, it is a good idea to back up your device just prior to doing the download. You can back it up to iCloud or to iTunes. Personally, I prefer to back it up to iTunes, and then to do the download via iTunes as well. Doing a Wifi download can, by the very nature of the OTA environment, run into more issues than a hard-wired one via iTunes.
If it is just a version release (like 8.0.1, or 8.0.2), then I might download it via Wifi, since the content is not likely to be very large. But for any major new release (7 to 8, etc.) it is always a good idea to do it via the USB cable rather than OTA.
I would also suggest that you set up your device to do automatic iCloud backups. Whenever it is turned on (i.e., not manually powered off - it can be "asleep"), plugged into a power source, and connected to Wifi, it will do an automatic backup every 24 hours. Mine usually backs up at night.
But even with my iCloud backup in reserve, I still did an iTunes backup before I upgraded to iOS 8. I like having the extra security of that second backup to choose from, should I need it. Here is a support article comparing the two types of backup:
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
Sorry you lost your stuff. Hope then next update goes better for you!
Best of luck,
GB -
i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse. -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
I just connect one monse to my MacBook Air and now my keybord is not working
I just connect one monse to my MacBook Air and now my keybord is not working
What to do?lrfrustrated wrote:
I just downloaded Adobe XI onto my macbook air and now I cannot save or print any PDF files. Will not let me do Print-Save as PDF, and if i do Save as i get a message saying that the file is corrupted. I had NO PROBLEMS at all doing this many times until i downloaded the new version. I have uninstalled and reinstalled, to no avail. I am super frustrated.
Print>Save as PDF - uses Preview (part of OS X), so Adobe Reader should have no effect on that at all.
As to the "damaged file" error, simply uninstalling the Reader app won't affect it. Do the following:
Mac HD/Library/Internet Plug-ins
Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files
Mac HD/Applications
Trash the Adobe Reader app
[user]/Library/Preferences
Trash the com.adobe.Reader.plist file
To access the [user]/Library, hold the "Option" key and click "Go" from the FInder menu.
Mac HD/Library/Application Support/Adobe
Trash the Reader folder (the whole folder)
Empty the Trash.
Download the FULL installer here: http://get.adobe.com/reader/enterprise/
Quit your browser and reinstall Reader.
Launch it from the Applications folder and accept the license agreement.
You should have no problems downloading PDFs with Safari.
Unfortunately, ANY PDF that says it's damaged.... is. You'll have to trash them. -
PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!Place the device in DFU mode and let iTunes restore the device to factory condition.
-
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
-
My iphone 4 of ios 7.1.1 sim card has not working from since yesterday, it always shows searching whenever i insert sim in it, i do it again and again, but it cant be fix. What can i do? Please help me.
Get a new SIM from your carrier.
-
Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Cheers, Tom -
ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference
Hi, JoJoEvs.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when experiencing this issue. After all steps related to your sound issue have been processed, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Jason H -
i upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues?
From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
Take the following steps:
1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
Hope this helps! -
my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best. -
AIR 16.0.0.272 geolocation not work on iOS
Geolocation services not works at all on iOS devices if application compile using AIR SDK 16.0.0.272 for Windows.
While the release notes indicated: (fixed issues) Geolocation services are not working (Bug 3916071)
Geolocation service is allways muted on iOS 8.1.2.
There are no system dialog about Geolocation permission, as well as by using AIR SDK 16.0.0.250 beta
Is it a know issue?for the life of me, i am trying to make it work with out any success. Can you help? this is my manifest
<iPhone>
<Entitlements>
<![CDATA[ <key>get-task-allow</key>
<false/>
<key>beta-reports-active</key>
<true/> ]]>
</Entitlements>
<InfoAdditions><![CDATA[
<key>UIDeviceFamily</key>
<array>
<string>1</string>
<string>2</string>
</array>
<key>NSLocationAlwaysUsageDescription</key>
<string>Sample description to allow geolocation always</string>
<key>NSLocationWhenInUseUsageDescription</key>
<string>Sample description to allow geolocation when application is in foreground</string>
]]></InfoAdditions>
<requestedDisplayResolution>high</requestedDisplayResolution>
</iPhone> -
Iphone 5 update to IOS 7, now visual voice mail does not work
I updated my Iphone 5 today to ios 7 and when it was done I noticed that when I went into the phone app and tapped on the voice mail icon it immediately dialed into voice mail. Visual voice mail was not there. I looked into some forums and turned on/off airplane mode, turned the phone off and on and reset network settings but it did not work. How can I get Visual Voice Mail working for ios 7
Hey there Bobehm,
I absolutely love the new iOS 7 update. It brings a whole new dimension to Apple devices. Let's make sure your visual voicemail continues to run on the new software.
Are you able to access other data applications successfully such as Safari? Are you having a similar issue where if you hit the visual voicemail icon it just auto dials your voicemail? Have you tried leaving yourself a voicemail as suggested by zona?
Please provide additional details so that I can better assist.
NicholasB_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
My client created .idml file in CS5.5. I cannot open it in CS5 or CS4. I open the application, click open, select the document and NOTHING happens... no error message, no document, nothing. Help? Here's the file if someone wants to give it a go: http
-
Urgent: Getting Exception while starting OIM in Weblogc
Hello, While starting OIM (9102 BP15) over weblogic, i see this exception in the logs. What could be the issue ? ####<Dec 8, 2011 4:47:26 PM PST> <Error> <HTTP> <hostname> <OIM_SERVER1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default
-
BSP Tableview error when trying to bind an itab within an itab
Hello dear forum members, I got a requirement to dynamically generate tableviews and bind them to a model's attribute (an itab 'model->gt_prd_grps' which holds the actual internal table to display as tableview 'model->gt_prd_grps-prods_table' within
-
Importing stills into CS6 from Photoshop CS4
I appear to be unable to import my still images from Adobe Photoshop CS4 (file types psd) into Premiere Pro CS6 and get the following error message "The importer reported a generic error". Am I missing a very simple trick (other than having to upgra
-
Sun's JDBC Tutorial. Need a Little Help
im learning about JBDC using suns tutorial but ive run into a problem. on this page here http://java.sun.com/docs/books/tutorial/jdbc/basics/retrieving.html about 1/7th of the way through they give u some code. but when i used it in my IDE (netbeans