IOS certificate name is wrong

When creating a new certificate for iOS development, the name that is being used is not mine. I would expect to see "Bob Smith" in the name field when creating a development certificate, but instead I see "Bob Jones" where Jones is the name of another person in the group. I am using a brand new computer that Mr. Jones has never touched. Anyone know where the name comes from when requesting a certificate and why it wouldn't be my own?

Updated the Apple ID, inputting the same values that were in there and it looks to have resolved the name problem.

Similar Messages

IOS Certificate is Pending Approved

First i try to upload certificate Signing request,after that in IOS Certificate Section in development tab,it is shown Pending aprroved,Can you Please tell me how to make it approved so that i can dounload Developed certificate,i try to refresh browser but it is still show me

Really diesel vdub, that's your best advice? What are you 12? Maybe if you worked in the IT industry you would know more about software management and risk management. Apparently by your advice you know nothing about either.
Well I work in IT and manage our iOS and Droid MDM servers. Software updates are critical for device and company security. Running an devices not fully patched is not smart. iOS 6 will work fine and is more secure than iOS 5, which completely negates your assertion on risk managment. Its your phone isn't it? Do what you want with it, upgrade to 6 and move on. You'll be fine.
P.S. Lose the attitude. Unless you are ****-bent on abiding by your company's ludicrous rules, there's nothing wrong with the opinions expressed by Diesel, and no reason for insults.

Error while extending controller: class name is wrong or not included

Hi All,
I am getting this error while I port my extended controller class to the custom top and assign this controller to the page. I have made sure its the class file that is copied. The directory is correct, the permissions were given using chmod 775. There exists a soft link betwen the custom top and the oracle top as well. What else am I missing here?
Error: oracle.apps.fnd.framework.OAException: Could not create Java class: (oracle.apps.ap.oie.entry.webui.XXEntryFlowPageCO) associated with region: (GeneralInformationPG). This is probably because the class name is wrong or not included in project.

:( Started out with that Gyan. If i do give the path with xx. appended to it, it lets me save and when i log back in and there are no changes to the page. I go to the personalise option to find the modification has been overwritten. I was told that this is so because Oracle doesnt recognise the xx.path and since there exists a soft link already the standard path with the new controller name should work.
i have really tried both of these options and am not sure what could be wrong. thanks for all your attempts to help. anything else i can try?

My name is wrong on my email. i cant figure out how to fix it. Help?

I have started a mobile me account and my name is wrong on the from line. How do I fix this.

Do you mean in your from field or the signature field?
where does it show up...? it wouldn't be on the iPhone as that doesn't show a from field. Check the account details in MM open it up go to settings and check you typed it in right simple as that if it's on someone elses hardware when they recieve an email from you then they need to fix your name in their contacts.

How to disable Outlook for checking for IMAP/POP3 Certificate Name Mismatch?

I have outlook clients that are connected to an IMAP/POP3 server that's off-site provided by company A.
Company A requires me to enter imap.companya.com for imap server address and 993 for the port.
I must also enable SSL for the connection.
When I do this, Outlook pops up an error message (shown below), that must be reacted to every time it checks for mail.
The reason is that the certificate is for myserver.companya123.com and that's different than imap.companya.com but company A wont change it. They said I need to disable my email programs certificate check so it doesn't keep prompting
me. Now I can do this with my iphone, and other email programs without incident. But I cannot find where to disable it in outlook.
If I change the imap server address in my account settings for outlook to instead use myserver.company a123.com, outlook can't connect and as the vendor said I must use imap.companya.com as the imap server address.
I need to be able to connect via SSL (so nobody can swipe my password over the wire) but not have to react 1000x a day to the certificate warnings.
I don't want to use Eudora, or another email client that allows me to easily disable the warning. I want to use outlook. How do I set outlook so it doesn't keep popping up these certificate server name mismatch warnings?
I spent days searching for a fix, and it seems there are fixes via the registry for just about every type of certificate issue, but NOT THIS PARTICULAR ONE.
I am hoping someone knows exactly what I am talking about and knows of a easy fix. I must use SSL so please don't tell me to disable SSL.
What I need is to disable outlook from presenting that alert. That's what I need to do. No other solution will suffice. I hope outlook does not have a product limitation that prevents such a thing from being done. I am ok with a registry fix if need be, but
being able to disable outlook from presenting certificate name mismatch alerts is critical. Hope its possible! Thanks!

Hi,
I would suggest we try the registry key mentioned in this
article (Method 4) to configure Outlook to allow the connection to the mismatched domain name, and see if it works:
HKEY_CURRENT_USER\Software\Microsoft\Office\<var>xx</var>.0\Outlook\AutoDiscover\RedirectServers
Let me know if this doesn't work.
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Certificate Name and Expirty Date is not saved in Certificate Manager

The following scenario is happening for few cases:
* Firefox shows "Add Exception" for the certificate
* The certificate is added as permanent exception.
* Go to Firefox -> Tools -> Options -> Advanced -> View Certificates
* Go to Servers Tab
* The certificates which I had stored, doesn't show the certificate name and expiry date. For certificate name it shows <Not Stored>, and for expiry date it is empty.
* Also, when I select it, Export, View is all disabled. Only "Import", "Delete" and "Add Exception" is enabled.
* If I click on "Add exception" again, it says it is verified as it is already there in database.
* However, if I add it as "Temporary", then everything "Name, Expiry Date" is saved.
Is it a known issue in Firefox or am I Missing something. Please confirm and let me know.

Hi,
Go to T Code :-SM31
table J_1IEWT_ECFLAG -
check " X" against your Company code.
hope this will help
SU*

Contact name is wrong in the invoice print out

Hi folks,
contact person name is wrong in the invoice pint out,but in sales doc the sales group number and name is correct.
what is the solution for tha above issue?
Regards
srinivas

Dear Srinivas,
Please check the name of the contact person in the Customer master data -->General data -->Contact person tab.
If it is correct then take help of ABAPer to find the cause through Output program.
I hope this will help you,
Regards,
Murali.

Changing ios application name

I just got approval for application from apple review, but in mac store a spelling of a company name is wrong. i.e, AppName by Liquiderice. And that should be AppName by Liquidrice. Is that any way i can change it?.

where can i register the App name ?

Certificate name.p12

Hi all,
well can i know that how i can grep the cert, public key and private key from the certificate name.p12.
I have imported the certificate in thunderbird, but the issue is i am unable to grep the public and private key out from the name.p12.
As i have to offer my friends with the name.crt so that they can decrypt the emails which i send to them .
i am using sun java messaging server.
regards
Adeel

adeelarifbhatti wrote:
well can i know that how i can grep the cert, public key and private key from the certificate name.p12.
I have imported the certificate in thunderbird, but the issue is i am unable to grep the public and private key out from the name.p12.
As i have to offer my friends with the name.crt so that they can decrypt the emails which i send to them .You can extract the public key from a pkcs12 file by using OpenSSL as per the following web-site:
https://ca.cern.ch/ca/Help/?kbid=023010
Regards,
Shane.

Support forum screen names is wrong

My screen name is wrong. I specified my screen name to be "Jimmy-Jay" but Midler got tacked onto the end. That came from a question asking me to enter the letters I saw in an image to stop non-human interaction with the support forum.
I looked all over for "my account" or something like that to go into to fix.
How can I fix this?
Thanks.
Jimmy-Jay

Hi,
This should be fixed now Let us know if you have any other questions.
Thanks,
SunshineF
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Help! Certificate name validation failed.

Hi. Im new to Windows Server 2008 and Active Sync.
I recently installed Windows Small Business Server 2008 which installed the Exchange Server Role Automatically.
I have sucessfully created some mailboxes/users and now I need to access them from outlook and mobile devices
My Company website is in the format www.mydomain.com. The MX records have not yet been directed to the server from the domain host.
When i tried Microsoft Connectivity Analyzer to check connections with Active Sync, it passes all tests except where it says "Certificate name validation failed".
It also states that "Host name www.domain.com doesn't match any name found on the server certificate CN=Sites."
I do not know why this occurs. my internal domain name is in the format "domain.local". I wondered if i was supposed to make it the same as the public www.domain.com format.
Please assist in any way you can.

You need a certificate that is trusted by your mobile devices. Unless you can put your root certificate or self-signed certificate in the trusted certificates store on every mobile device, which is really hard to do, you should buy a UCC SSL certificate
with the Common Name (CN) of your Exchange server URL public hostname, e.g., mail.domain.com, not mail.domain.local, and a Subject Alternative Name (SAN) with Autodiscover.domain.com where domain.com is your e-mail domain. Those are the
minimum names that you need in your certificate and for most smaller customers they're all you need.
Consider deploying split-brain DNS so that you can use the same names, e.g., mail.domain.com, and quit using the AD domain name domain.local for Exchange URLs. It will make your whole certificate experience much easier and probably make things easier
for your users as well.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

I have a 1st gen. iPad and i"m unable to update to iOS 6, what's wrong?

I have a 1st gen. iPad and unable to update to iOS 6, what's wrong?

Correct, iOS 5.1.1 is the highest possible for the first gen iPad.

IPhone 6 Plus (iOS 8.2) Displaying Wrongs Artist Names

Hello Readers,
I hope this somehow makes it's way to someone at Apple or anyone who may be able to help me:
A few days ago, I updated to iOS 8.2 on my iPhone 6 Plus (128 GB/Sprint). Then I noticed that the artist names were incorrect. First I thought maybe it was a glitch, so I restored my iPhone from my backup, but it was exactly the same. So then I checked iTunes on my Mac and everything was correct, then lastly I checked my iPod Touch which syncs with the same Mac and the same music and everything there was correct.
I cannot seem to figure out what's going on, because it all started when I updated to iOS 8.2, and it's very annoying because it's on some songs.
Some of songs that I noticed that are incorrect are Michael Jackson's "Love Never Felt So Good (Duet With Justin Timberlake)", when I play that song it says "Michael Jackson Feat. Akon" on the artist info, but that is not how I have it on my Mac or how it appears on my iPod Touch.
I purchased Michael Jackson's Xscape album both as CD and from the iTunes Store and both versions display the wrong artist info for "Love Never Felt So Good (Duet With Justin Timberlake)".
Here are some screen shots so you can see what I'm talking about:
If you know how to fix this, please help me and other iOS 8.2 users who are going through this.
THANK YOU,
Luis

Hey there!
That sure sounds unpleasant. Are the tracks affected only purchased items from the iTunes Store? If so, give this a whirl and let me know if it helps you out:
Remove the songs from your iOS device by sliding left on the track and tapping "Delete". They are not permanently deleted as they will be retrieved from your account in later steps.
Navigate to Settings > iTunes and App Store then tap on your Apple ID and press "Sign Out"
3) Navigate to Settings > General > Reset > Reset All Settings. Enter your passcode if necessary and proceed. (*NOTE: Resetting All Settings will remove certain information from your device such as the selected background on home and lock screen, remove your passcode and general settings. You may have to re-enter this kind of information once iPhone reboots)
Once your device turns back on, navigate to Settings > iTunes and App Store. Renter your Apple ID and password.
Launch the iTunes Store app from the home screen on your device.
Retrieve your purchases by tapping on "More", located at the bottom right corner of the app. Under the "Purchased" section, find the songs you've removed and tap on the cloud icon to retrieve your purchases.
I can only speculate that this issue is related to settings on your device. It's possible that the issue persists because you've restored a backup where the bug was located in the first place. The steps above should help. Try it out and let me know if that works for you.
Cheers!

Move files and create unique name something wrong with my script

Can you see where I might be going wrong here?
Just trying to create a unique name if something exists.
In English.
Move file to the destinationFolder
Item exists in destinationFolder > Move file in the destination folder to the fake Trash > If it exists in fakeTrash too then give it a new name an ending of_a.psd then out it in the trash
Once thats done move start file to the destination folder.
Currently when the file exists in the destination folder and in the trash, I get the prompt then the error
error "System Events got an error: Can’t get disk item \"NN_FR10WW06290PK3LE.psd\"." number -1728 from disk item "NN_FR10WW06290PK3LE.psd"
set fileMatrix to {¬
          {folderName:"BHS", prefixes:{"BH", "SM", "AL"}}, ¬
          {folderName:"Bu", prefixes:{"BU"}}, ¬
          {folderName:"Da", prefixes:{"ES"}}, ¬
          {folderName:"Di", prefixes:{"DV"}}, ¬
          {folderName:"Do", prefixes:{"DJ", "RA"}}, ¬
          {folderName:"In", prefixes:{"GT", "CC"}}, ¬
          {folderName:"Fr", prefixes:{"FR"}}, ¬
          {folderName:"No", prefixes:{"NN"}}, ¬
          {folderName:"Ma", prefixes:{"MA", "MF", "FI", "MC", "MH", "MB"}}, ¬
          {folderName:"Pr", prefixes:{"PR"}}, ¬
          {folderName:"To", prefixes:{"TM15", "TM11", "TM17"}}, ¬
          {folderName:"Wa", prefixes:{"WA"}}, ¬
          {folderName:"Se", prefixes:{"SE"}}}
tell application "Finder"
          set theHotFolder to folder "Hal 9000:Users:matthew:Pictures:HotFolderDone"
          set foldericon to folder "Hal 9000:Users:matthew:Pictures:Icons:Rejected Folder Done"
          set fakeTrash to folder "Hal 9000:Users:matthew:FakeTrash"
---here
          repeat with matrixItem in fileMatrix -- look for folder
                    set destinationFolder to (folders of desktop whose name starts with folderName of matrixItem)
                    if destinationFolder is not {} then -- found one
                              set destinationFolder to first item of destinationFolder -- only one destination
                              set theFolderName to name of destinationFolder
                              repeat with aPrefix in prefixes of matrixItem -- look for files
                                        set theFiles to (files of theHotFolder whose namestarts with aPrefix) as alias list
                                        if theFiles is not {} then repeat with startFile intheFiles -- move files
                                                  try
move startFile to destinationFolder
                                                  on error
activate
                                                            display dialog "File “" & (name ofstartFile) & "” already exists in folder “" & theFolderName & "”. Do you want to replace it?"buttons {"Don't replace", "Replace"} default button 2 with icon 1
                                                            if button returned of result is "Stop"then
                                                                      if (count theLastFolder) is 0 thendelete theLastFolder
                                                                      return
                                                            else if button returned of result is"Replace" then
                                                                      set fileName to get name ofstartFile
                                                                      if exists file fileName indestinationFolder then ¬
                                                                                try
--next line moves existing file to the faketrash
move file fileName of destinationFolder to fakeTrash
move file startFile to destinationFolder
--if it already exists in fake trash give it a new name then move that file to fake trash
                                                                                on error errmess numbererrnum -- oops (should probably check for a specific error number)
                                                                                           log "Error " & errnum& " moving file: " &errmess
                                                                                           set newName to mygetUniqueName(fileName,fakeTrash)
                                                                                           set name of fileNameto "this is a unique name"-- or whatever
                                                                                           set name of fileNameto newName
--Now move the renamed file to the fake trash
move file fileName to fakeTrash
--now move the startfile to destination folder
move file startFile to destinationFolder
                                                                                end try
                                                            else -- "Don't replace"
                                                                      if not (exists folder "Hal 9000:Users:matthew:Desktop:Rejected Folder Done") then
                                                                                set theLastFolder toduplicate foldericonto desktop
                                                                      else
                                                                                set theLastFolder to folder"Hal 9000:Users:matthew:Desktop:Rejected Folder Done"
                                                                      end if
                                                                      delay 0.5
move startFile to theLastFolder with replacing
                                                            end if
                                                  end try
                                        end repeat
                              end repeat
                    end if
          end repeat
          try
                    if (count theLastFolder) is 0 then delete theLastFolder
          end try
end tell
to getUniqueName(someFile, someFolder)
     check if someFile exists in someFolder, creating a new unique file name (if needed) by adding a suffix
          parameters -          someFile [mixed]: a source file path
                              someFolder [mixed]: a folder to check
          returns [list]:          a unique file name and extension
          set {counter, suffixes, divider} to {0, "abcdefghijklmnopqrstuvwxyz", "_"}
          set someFile to someFile as text -- System Events will use both Finder and POSIX text
          tell application "System Events" to tell disk item someFile to set{theName, theExtension} to {name, name extension}
          if theExtension is not "" then set theExtension to "." & theExtension
          set theName to text 1 thru -((length of theExtension) + 1) of theName -- just the name part
          set newName to theName & theExtension
          tell application "System Events" to tell (get name of files of folder(someFolder as text))
                    repeat while it contains newName
                              set counter to counter + 1 -- hopefully there aren't more than 26 duplicates (numbers are easier)
                              set newName to theName & divider & (item counter ofsuffixes) & theExtension
                    end repeat
          end tell
          return newName
end getUniqueName

There are numerous errors in your script, and it's a large script so there might be more, but these are the standouts for me:
At line 48 you:
                                                                      set fileName to get name of startFile
which is fair enough - you then use this to see if the file already exists in the destinationFolder. However, if it does the logic about how to deal with that is flawed.
At line 56 you catch the error:
                                                                                on error errmess number errnum -- oops (should probably check for a specific error number)
                                                                                          log "Error " & errnum & " moving file: " & errmess
                                                                                          set newName to my getUniqueName(fileName, fakeTrash)
                                                                                          set name of fileName to "this is a unique name" -- or whatever
                                                                                          set name of fileName to newName
--Now move the renamed file to the fake trash
move file fileName to fakeTrash
--now move the startfile to destination folder
move file startFile to destinationFolder
                                                                                end try
so let's focus on that.
56: catch the error
57: log the error
58: generate a new unique filename
59: change the name of fileName to some other string
Hang on, wait a minute.... we already ascertained that at line 48 you defined fileName as a string object that indicates the name of the file. This is just a string. It's no longer associated with the original file... it's just a list of characters. Consequently you cannot set the 'name' of a string, hence your script is doomed to fail.
Instead, what I think you want to do is set the name of the startFile to the unique string. Files have filenames, and therefore you can set the name.
You have a similar problem on line 64 where you try to 'move file filename to fakeTrash'. fileName is just a string of characters. It isn't enough to identify a file - let's say the file name is 'some.psd'. You're asking AppleScript to move file some.psd to the trash. The question is which some.psd? The one on the desktop? in your home directory? maybe on the root of the volume? or maybe it should search your drive to find any/all files with that name? nope. None of the above. You can't just reference a file by name without identifying where that file is. So you probably want to 'move file fileName of destinationFolder...'
There may be other problems, but they're likely to be related - all issues with object classes (e.g. files vs. strings), or not being specific about which object you want.
As I said before, though, I might be way off - you don't say where the error is triggered to make it easy to narrow down the problem. Usually AppleScript will highlight the line that triggered an error. Knowing what that line is would help a lot.

Problem with ios certificate server not updating the CRL

Hi all,
The background is that i'm currently setting up a DMVPN solution with the ipsec tunnels between the spokes created using certificates.
I'm using a cisco 877 as the CA server (its running 12.4(6)T5) to provide the certificates to the spoke routers. This part is working fine - the spokes can request a certificate and get one issue all well and good.
The problem is on the CA, the CRL lifetime is set to 24 hours but the CA is not updating the CRL so when the spokes look for the revocation list (as set in their trustpoint) they are reporting an error that the CRL is out of date and won't connect.
If is do a '#sh crypto pki server' it lists a 'CRL NextUpdate timer. this has a timestamp that is 24 hours after the last certificate was revocked. The only way i can get the CRL to be re-generated is to revoke a certificate.
So, my question is, have i missed something here? I thought the CA would automatically generat a new CRL file every 24hours.
Can anyone help?
thanks.

Hi Mark (?)
this seems to match this bug:
CSCsy95838    IOS CA: CRL not updated, update timer no started
However it does not mention if 12.4(6)T5 is affected, only that it was found in 12.4(15)T3 and resolved in 12.4(15)T10 and other more recent releases.
I would suggest trying the latest 12.4(15)Tx, 15.0(1)Mx or 15.1(4)Mx release if you can.
I supposed you've though of it, but just in case: as a workaround you can disable the CRL check on all the DMVPN routers, obviously they will still allow connections from routers with a revoked spoke.
As a (temporary?) replacement for a CRL, you could use a "certificate ACL" with which you can kind of create a "manual local CRL" :
crypto pki certificate map certACL 10
   serial-number ne
   serial-number ne
   etc.
crypto pki trustpoint myTP
   match certificate certACL
(note the "ne" stands for "not equal" so you are permitting any certificate whose serial number is not listed)
Obviously you would have to configure (and maintain!) this on each router participating in the DMVPN so this is cumbersome, but I suppose if you don't often revoke certs it might be an option.
hth
Herbert
If this post answers your question, please click the "Correct Answer" button

IOS certificate name is wrong

Similar Messages

Maybe you are looking for