IOS CLI for WPA2 needed..

Hi,
I can't get my 871w to enable WPA2 for it. I found a reference to "wpa version 2" as CLI which my rather new IOS doesn't seem to understand.
So how to enable WPA2 via CLI commands? And by the way do you have a link to the wireless CLI reference?
Ciao, Bernd

Hi Jeff,
thanks for message and the help - I appreciate that!
Yes my router shows the option:
CiscoKunr(config)#int Dot11Radio 0
CiscoKunr(config-if)#encryption mode ciphers ?
aes-ccm WPA AES CCMP
tkip WPA Temporal Key encryption
wep128 128 bit key
wep40 40 bit key
And I set it to aes-ccm, but my client (Macbook) says it's still WPA and not WPA2 like my D-Link wireless. Is the message of the Mac OSX wrong or do I miss something else in the setting for WPA2?
Ciao, Bernd

Similar Messages

Need CLI commands for WPA2 Personal Mode

I've seen this example, but I need the CLI the gui generates. Can anyone help out please?
https://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#pers
This is what I need to accomplish w/o the gui interface on an 1142N running 12.4
Configure in Personal Mode
The term personal mode refers to products that are       tested to be interoperable in the PSK-only mode of operation for       authentication. This mode requires manual configuration of a PSK on the AP and       clients. PSK authenticates users via a password, or identification code, on       both the client station and the AP. No authentication server is necessary. A       client can gain access to the network only if the client password matches the       AP password. The password also provides the keying material that TKIP or AES       uses to generate an encryption key for the encryption of the data packets.       Personal mode is targeted to SOHO environments and is not considered secure for       enterprise environments. This section provides the configuration that you need       to implement WPA 2 in the personal mode of operation.

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Hi,
Below are the CLI commands for WPA2 personal mode
Configure terminal
interface dot11Radio 0
encryption mode ciphers aes-ccm
or
encryption vlan mode ciphers aes-ccm < --- If you have multiple vlans
exit
dot11 ssid
    authentication open
    authentication key-management wpa version 2
    wpa-psk ascii
Regards,
Madhuri

I have an ipod touch 4th gen and would like to install pages on it but i need ios 7 for that. how do i install an older version?

i have an ipod touch 4th gen and would like to install pages on it but i need ios 7 for that. how do i install an older version?

Did you follow the instrctions in this link?
App Store: Downloading Older Versions of Apps on iOS - Apple Club

I need iOS 5 for "Drive Google" and " i Cloud" where and how do I get to download it?

I need iOS 5 for "Drive Google" and " i Cloud" where and how do I get to download it?

You have to update by using a computer via the latest version of iTunes. You can connect the iPad to your computer and launch iTunes. Select the iPad on the left side under the devices heading. Click on the Summary Tab on the right. Click on Check for Update.
After you update to iOS 5 or later, you will have Software Update in you settings and can update via WiFi OTA. If you have the iPad 2 - you will be updating to iOS 6.0.1.
If you have the original iPad - iOS 5.1.1 is as high as you can go.
How to update to iOS 5 or later.
http://support.apple.com/kb/HT4972

HT1222 Do I really need to install an app iOS Updater for iOS 6.0.1 for my iPhone5?

Do I really need to install an app iOS Updater for iOS 6.0.1 for my iPhone5?

The choice to Update or not is yours to make...

I have an ipod touch 4s with iOS 6.1.6 and i can't download some apps because i need iOS 7 for example FACEBOOK how can i have the iOS 7 without buying another ipod or will the update of iOS 7 apeare sometime for my ipod touch 4s?

I have an ipod touch 4s with iOS 6.1.6 and i can't download some apps because i need iOS 7 for example FACEBOOK how can i have the iOS 7 without buying another ipod or will the update of iOS 7 apeare sometime for my ipod touch 4s?

See App Store: Install the latest compatible version of an app to get Facebook for iOS 6.

I have an iphon 4 got the new ios 7 and I need to redo my icloud but I dont have the password for it and apple does not have the infromation form the old account what should I do to turn off find my iphone

I have an iphon 4 got the new ios 7 and I need to redo my icloud but I dont have the password for it and apple does not have the infromation form the old account what should I do to turn off find my iphone

To to http://iforgot.apple.com and sign in with your iCloud ID. A new password will be sent to the associated email address.
It this doesn't work, go to https://getsupport.apple.com ; click 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'.

I downloaded ios 6 for my iPad 2 and some of the upgrades went through but not all. It sounds like I need to reinstall ios 6. How do you do that? Everytime I try to upgrade it says I'm already updated

I downloaded ios 6 for my iPad 2 and some of the upgrades went through but not all. It sounds like I need to reinstall ios 6. How do you do that? Everytime I try to upgrade it says I'm already updated

If you mean Siri then that is only on the iPad 3, it is not on the iPad 2 in iOS 6 (possibly because the iPad 2 doesn't have the Audience chip which the iPad 3 does). If there are other things that you think are missing (YouTube has been removed, and Passbooks is iPhone and iPod Touch only) ?

I have i phone 4s and update for ios 6 but i need back to ios 5.1.1

i have i phone 4s and update for ios 6 but i need back to ios 5.1.1

It cannot be done.

Iphone 5 poor battery since iOS 8 updated Apple need to get this sorted as if ur on Internet on fone for 20 mins or so battery goes down very quickly and no it's not my battery I have 3 iphone 5 doing same

Iphone 5 poor battery since iOS 8 updated Apple need to get this sorted as if ur on Internet on fone for 20 mins or so battery goes down very quickly and no it's not my battery I have 3 iphone 5 doing same Apple take note there's millions of people that need there done not to fully charge it then it goes flat within a hour and thats with a new battery fitted aswell

brianbrew wrote:
Apple take note there's millions of people that need there done not to fully charge it then it goes flat within a hour and thats with a new battery fitted aswell
Take note that in the TOS that you agreed to when you joined the community that this is a user to user forum, and Apple does not participate. If you want Apple to take note of something, then you need to use the feedback page HERE, and click on the appropriate link.

I have just purchased a MacBook Pro and iWork's. when I try to upload documents using iCloud, it now wants me to purchase iWorks for iOS ? Do I need to purchase both versions?

I have just purchased a MacBook Pro and iWork's. When I try to upload documents using iCloud, it now wants me to purchase iWorks for iOS ? Do I need to purchase both versions?

To be able to use documents at iCloud.com, you need at least one iOS device that uses the same account with at least one of the iWork apps installed.

What is the equivalent implementation of isr ios cli "ip tcp synwait-time 10" on asa cli

I would like to see an implementation of an ISR IOS cli:
     ip tcp synwait-time 10
on an ASA cli. thank you much in advance.

Hi Oscar,
this is supported but you need a class-map type management:
http://www.cisco.com/en/US/docs/security/asa/asa91/configuration/firewall/mpf_service_policy.html#wp1167296
TCP and UDP connection limits and timeouts, and TCP sequence number randomization: supported for management traffic...
access-list CONTROL_ACL extended permit tcp host 1.1.1.2 interface outside eq https log
access-list CONTROL_ACL extended permit tcp host 1.1.1.2 interface outside eq ssh log
class-map type management CONTROL
match access-list CONTROL_ACL
policy-map global_policy
class CONTROL
set connection conn-max 1
service-policy global_policy global
In my tests, it worked for SSH but not for HTTPS:
ciscoasa(config)# sh conn all
2 in use, 2 most used
TCP outside 1.1.1.2:38670 NP Identity Ifc 1.1.1.10:22, idle 0:00:38, bytes 20, flags UfrOB
TCP outside 1.1.1.2:26470 NP Identity Ifc 1.1.1.10:443, idle 0:00:02, bytes 0, flags UB
After other sessions:
%ASA-7-710005: TCP request discarded from 1.1.1.2/25085 to outside:1.1.1.10/22
%ASA-3-201011: Connection limit exceeded 1/1 for input packet from 1.1.1.2/25085 to 1.1.1.10/22 on interface outside
ciscoasa(config)# sh conn all
4 in use, 5 most used
TCP outside 1.1.1.2:41726 NP Identity Ifc 1.1.1.10:443, idle 0:00:43, bytes 0, flags UB
TCP outside 1.1.1.2:26087 NP Identity Ifc 1.1.1.10:443, idle 0:00:45, bytes 0, flags UB
TCP outside 1.1.1.2:33312 NP Identity Ifc 1.1.1.10:443, idle 0:00:47, bytes 0, flags UB
TCP outside 1.1.1.2:26470 NP Identity Ifc 1.1.1.10:443, idle 0:00:04, bytes 0, flags UB
Somehow, 0 hitcount on HTTPS ACL...
ciscoasa(config)# sh access-list
access-list CONTROL_ACL line 1 extended permit tcp host 1.1.1.2 interface outside eq https log informational interval 300 (hitcnt=0) 0x59b7aa4c
access-list CONTROL_ACL line 2 extended permit tcp host 1.1.1.2 interface outside eq ssh log informational interval 300 (hitcnt=8) 0x31fe983c
ciscoasa(config)# sh asp drop
Frame drop:
Flow is denied by configured rule (acl-drop)                                 2
First TCP packet not SYN (tcp-not-syn)                                      49
Connection limit reached (conn-limit)                                        2
FP L2 rule drop (l2_acl)                                                    48
Flow drop:
SSL bad record detected (ssl-bad-record-detect)                              3
ciscoasa(config)# sh service-policy
Global policy:
Service-policy: global_policy
    Class-map: CONTROL
      Set connection policy: conn-max 1
        current conns 1, drop 2
you can also control each feature timeouts seperately via:
telnet/ssh timeout 1
http server idle-timeout/session-timeout 1
Note: I tried this in GNS (asa 8.4.2) and using telnet from a router (not using a real browser for HTTPS) so the results might not be reflect a production environnement...
Patrick

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

"Sounds like you guys are using the same apple id for imessage. You will need to create a separate id for you wife. OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.

When will itunes develop ios 7 for ipod touch 4G??????? .

ITUNES TEAM AND THE DEVELOPERS NEED TO DEVELOP IOS 7 FOR IDEVICES THAT ARE CURRENTLY INCOMPATIBLE FOR IOS 7 BECAUSE IT IS TOTALLY UNFAIR AND BIASED FOR SOME TO HAVE AN IOS DEVICE WHICH IS NOT RUNNING ON THE LATEST SOFTWARE RELEASED!!!!!!!!
I HOPE MY WORDS ARE HEARD AND ARE BEING SUPPORTED BY THE REST IOS DEVICE USERS WHO FEEL THE SAME WAY AND ARE EXPERIENCING THE SAME PROBLEM.THANK YOU!!!!!

Never. It doesn't have enough RAM to run iOS 7, and there have been iOS devices incapable of running the latest release for three and a half years.
(99432)

WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark.

WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark and basically force us to upgrade to newer devices. Apple could of done better with the update and needs to resolve these issues.

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
The App store crashing is a known problem.
IOS 6 App store crash: Apple Support Communities

IOS CLI for WPA2 needed..

Similar Messages

Maybe you are looking for