IOS Configurator Group

Hi,
How do I create an IOS Configurator group?
What exactly are the prerequisites to create this group?
We plan the distribution of the profiles through the Apple configurator.
regards
mhuelskamp

Originally Posted by dmantz
Would this documentation be the piece you are requesting? https://www.novell.com/documentation...nfigurator.pdf I used this for establishing profiles on our classroom sets of iPads.
the Problem is, that i can't see the Button "Export Profile for Configurator" on the Page - System > Organisation.
regards
mhuelskamp

Similar Messages

Configuring group policy for user profiles in Windows Server 2012 R2 Domain

Requesting some experts advise on configuring group policy for user profiles.
We will be building new Windows Server 2012 R2 Domain Controllers (Domain of 400 users).
The settings which I am concerned:
1. Folder Redirection: Desktop, Documents, Favorites.
2. Quota for Folder Redirection - 1 GB per user.
3. Map a networked drive - 1 GB per user.
4. Roaming profile - (Will ignore if it does not suit our requirement).
The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
FYI, E-mails hosted on MS Office365 and OST file size of few users more than 25GB. So, in case the user moves from one computer to other, the entire mailbox will be downloaded via internet. This consumes high bandwidth if more than 3-4 users shift per day.
Thanks a lot for your valuable time and efforts.

Hi,
>>The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
This depends on where our outlook data files are stored. If these data files are stored under
drive:\Users\<username>\AppData\Local, then these files can’t be redirected, for folder redirection can’t redirect appdata local or locallow.
However, regarding your question, we can refer to the following thread to find the solution.
Roam outlook profiles without roaming profiles
http://social.technet.microsoft.com/Forums/office/en-US/3908b8e0-8f44-4a34-8eb5-5a024df3463e/roam-outlook-profiles-without-roaming-profiles
In addition, regarding how to configure folder redirection, the following article can be referred to for more information.
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Hope it helps.
Best regards,
Frank Shen

Problem in configuring "Group" in BizTalk Server Configuration

After installing BizTalk I am configuring it , Enterprise SSO is configured Successfully and then trying to configure Group,But it is failing.Below is the log file.
I have installed BizTalk Server 2010 and SL Server 2008 R2 in the same local machine.I have highlighted the part which I feel is giving problem, if you have solution for it please let me know.
And if you feel the issue is something different then also please tell me.
[2014-05-27 12:49:21:0335 Warning ConfigHelper] The serivce: MSSQLServerOLAPService does not exist. [2014-05-27 12:49:21:0336 Info ConfigHelper] SQL
Analysis service is not running on this machine. [2014-05-27 12:49:21:0355 Info Configuration Framework]Created IConfig2 object for feature: BAMPortal ProgID: MSEBiz.BAMConfigWizExt. [2014-05-27 12:49:21:0357 Info BAMConfigWizExt] C:\Users\DR111856\AppData\Local\Temp\ConfigLog(5-27-2014
12h49m18s).log [2014-05-27 12:49:21:0864 Warning ConfigHelper] The serivce: MSSQLServerOLAPService does not exist. [2014-05-27 12:49:21:0865 Info ConfigHelper] SQL Analysis service is not running on this machine. [2014-05-27 12:49:21:0872 Info
Configuration Framework]Created IConfig2 object for feature: MsEDIAS2 ProgID: Microsoft.BizTalk.Configuration.EDIAS2.EDIAS2Config. [2014-05-27 12:49:22:0033 Info EDIAS2Config] Entering function EDIAS2Config::Advise [2014-05-27 12:49:25:0972 Info Configuration
Framework]Leaving function LoadXMLfromModules() 2014-05-27 12:49:44:1693 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BizTalkMgmtDb on server ABCDEF\BIZTALKDB is not compatible. 2014-05-27 12:49:44:1703 [Info]
CfgExtHelper Connecting to the BAM Primary Import Table Database BAMPrimaryImport on server ABCDEF\BIZTALKDB 2014-05-27 12:49:44:1753 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BAMPrimaryImport on server
ABCDEF\BIZTALKDB is not compatible. 2014-05-27 12:49:44:1773 [Info] BAMTools Updates server ABCDEF\BIZTALKDB. 2014-05-27 12:49:44:1773 [Info] BAMTools Splitting the server name: ABCDEF\BIZTALKDB 2014-05-27 12:49:44:1773 [Info] BAMTools Split the server name
ABCDEF\BIZTALKDB into server ABCDEF\BIZTALKDB and port . 2014-05-27 12:49:44:1773 [Info] BAMTools Updated server name ABCDEF\BIZTALKDB to ABCDEF\BIZTALKDB 2014-05-27 12:49:44:1773 [Info] BAMTools Determining version of Microsoft SQL Server installed on server
ABCDEF\BIZTALKDB. 2014-05-27 12:49:44:1813 [Info] BAMTools Found Microsoft SQL Server installed with version 10.50.1600.1. 2014-05-27 12:49:44:1813 [Info] BAMTools Microsoft SQL Server 2008 with SP1 or higher is installed on server ABCDEF\BIZTALKDB. 2014-05-27
12:49:44:1813 [Info] BAMTools Microsoft SQL Server 2008 with SP1 or higher is installed on: ABCDEF\BIZTALKDB 2014-05-27 12:49:44:1823 [Info] CfgExtHelper The length of BAMAnalysis is 11. 2014-05-27 12:49:44:1823 [Info] BAMTools Determining version of Microsoft
SQL Server Analysis Services installed on server ABCDEF\BIZTALKDB. 2014-05-27 12:49:44:1933 [Info] BAMTools Found Microsoft SQL Server Analysis Services installed with version 10.50.1600.1. 2014-05-27 12:49:44:1933 [Info] BAMTools Microsoft SQL Server Analysis
Services 2008 with SP1 or higher is installed on server ABCDEF\BIZTALKDB. 2014-05-27 12:49:44:1933 [Info] BAMTools Determining whether Microsoft SQL Server Data Transformation Services (DTS) 2008 with SP1 or higher for BAM Analysis is installed on the local
machine. 2014-05-27 12:49:44:2053 [Info] BAMTools Determining whether Microsoft SQL Server 2005 Analysis Management Objects (AMO) is installed on the local machine. 2014-05-27 12:49:44:2053 [Info] BAMTools Finding assembly named Microsoft.AnalysisServices
in Global Assembly Cache. 2014-05-27 12:49:44:6963 [Info] BAMTools Microsoft SQL Server 2005 Analysis Management Objects (AMO) is installed on the local machine. [2014-05-27 12:49:44:0697 Info ConfigHelper]         Feature:
OLAPNS is installed 2014-05-27 12:49:44:6973 [Info] BAMTools Determining whether Microsoft Sql Notification Services 2005 is installed on the local machine. 2014-05-27 12:49:44:6973 [Info] BAMTools Product with product key {63A5DC0D-1EDD-4D69-8F31-87FAEB1F7084}
is not installed. 2014-05-27 12:49:44:6983 [Info] BAMTools Product with product key {C0B81E26-F7D0-4E84-941A-21C438BC586D} is not installed. 2014-05-27 12:49:44:6983 [Info] BAMTools Product with product key {EA145881-7452-4004-80B9-971FC3D1D8D8} is not installed.
2014-05-27 12:49:44:6983 [Info] BAMTools Product with product key {63A5DC0D-1EDD-4D69-8F31-87FAEB1F7084} is not installed. 2014-05-27 12:49:44:6993 [Info] BAMTools Product with product key {C0B81E26-F7D0-4E84-941A-21C438BC586D} is not installed. 2014-05-27
12:49:44:6993 [Info] BAMTools Product with product key {EA145881-7452-4004-80B9-971FC3D1D8D8} is not installed. [2014-05-27 12:49:44:0700 Info BAMTools] Built feature XML: <Configuration><Feature Name="BAMTools" DisplayName="Business
Activity Monitoring tools" Version="1.0" Description="Tools for the creation and maintenance of the SQL Server and Analysis Server (OLAP) infrastructure for Business Activity Monitoring."><SQL ID="{E1FC3106-8DD4-4f12-9EB6-849DD8BDD605}"
DisplayName="BAM Primary Import Database" Description="SQL database used to store the events from the Business Activities and then query for the progress and data of the activity instances. This database is also used for real-time aggregations."
ReadOnly="false"><Server>ABCDEF\BIZTALKDB</Server><Database>BAMPrimaryImport</Database><WindowsSecurity Editable="no">yes</WindowsSecurity><UserName></UserName><Password></Password></SQL><SQL
ID="{1D372BCB-DF59-43b6-A4A9-87082B5727B0}" DisplayName="BAM Archive Database" Description="SQL database used for archiving the Business Activity data which is too old. It is recommended to create the BAM Archive database to minimize
the accumulation of Business Activity data in the BAM Primary Import Database." ReadOnly="false"><Server>ABCDEF\BIZTALKDB</Server><Database>BAMArchive</Database><WindowsSecurity Editable="no">yes</WindowsSecurity><UserName></UserName><Password></Password></SQL><Question
ID="{12A38787-6B24-40ab-8888-5FE8ABA87B26}" Text="Enable A&nalysis Services for BAM aggregations" Answers="Yes,No" Default="Yes" ReadOnly="false"><Answer Value="Yes" GUID="{902F7E20-D6AE-453f-9D23-935ED7AF94C3}"
Selected="Yes"><SQL ID="{16567D1E-6946-4f4e-BB3F-900DE2648328}" DisplayName="BAM Analysis Database" Description="Analysis Services database that keeps the aggregated historical data for Business Activities" ReadOnly="false"
MSOLAPServer="Yes"><Server>ABCDEF\BIZTALKDB</Server><Database>BAMAnalysis</Database><WindowsSecurity Editable="no">yes</WindowsSecurity><UserName></UserName><Password></Password></SQL><SQL
ID="{B973DB76-BA7F-4a2e-A57E-07EEF54B37A8}" DisplayName="BAM Star Schema Database" Description="SQL database used to transform the data collected from the Business Activity Monitoring for OLAP Processing. This database is required
when the BAM Analysis database is used." ReadOnly="false"><Server>ABCDEF\BIZTALKDB</Server><Database>BAMStarSchema</Database><WindowsSecurity Editable="no">yes</WindowsSecurity><UserName></UserName><Password></Password></SQL></Answer><Answer
Value="No" GUID="{FC612DFE-1273-4f57-8EE3-95216638A67B}"/></Question><Question ID="{308cc88b-9e51-4103-ae4c-73300e02a7eb}" Text="&Enable SQL Notification Services for BAM alerts" Answers="Yes,No"
Default="No" ReadOnly="true"><Answer Value="Yes" GUID="{458e1878-eae6-4e09-8e5c-ba516548ceac}"><Name ID="{8B3212A1-44EA-46bc-A06C-75E289D1F840}" DisplayName="S&QL Server for Alerts
Databases:" Description="Notification Services server for BAM Alerting." Hidden="false" ReadOnly="true"><Value></Value></Name><Name ID="{1DAFDF2D-4377-415a-B1CA-2C5B3729A244}" DisplayName="Prefix
for Alerts Database &Names:" Description="Notification Services database root name for BAM Alerting." Hidden="false" ReadOnly="true"><Value></Value></Name><NTService ID="{c116ba3f-06d0-48cf-b0a1-4b263b07250e}"
DisplayName="BAM Notification Services User" Description="Windows account that will have permissions to access the data in the BAM Notification Services databases during Business Activity searches." ReadOnly="true"><UserName></UserName><Domain></Domain><Password></Password></NTService><Name
ID="{33c8fd0a-c89d-4dd0-8b2b-2ddacc6620e6}" DisplayName="BAM Alerts &SMTP Server:" Description="SMTP server to use for sending out BAM Alerting messages." Hidden="false" ReadOnly="true"><Value></Value></Name><Name
ID="{335b35f5-ffc4-4c7e-8cfc-582ec6bab9e0}" DisplayName="BAM Alerts File &Location:" Description="File system location to use for writing out BAM Alerting messages. If you accept this default location for delivering alerts
by file, Configuration will create the file share and grant write permissions to the SQL NS service account and the current logged-on user." Hidden="false" ReadOnly="true"><Value></Value></Name></Answer><Answer
Value="No" GUID="{3d95a679-aa37-403f-bf64-194e6aa2d993}" Selected="Yes"/></Question><Question ID="{FC99D786-2D26-489b-A748-42AE4DD0F6FC}" Text="&Remove the Business Activity Monitoring tools
for this Biztalk Group" Answers="Yes,No" Default="No" ReadOnly="true"><Answer Value="Yes" GUID="{4CF85429-F0DA-4ca3-8068-D125506A3FD9}"/><Answer Value="No" GUID="{5823E008-032F-4917-9EE5-B0AB4A18325C}"
Selected="Yes"/></Question></Feature></Configuration> 2014-05-27 12:49:44:7233 [Info] BAMTools Updated server name ABCDEF\BIZTALKDB to ABCDEF\BIZTALKDB 2014-05-27 12:49:44:7233 [Info] CfgExtHelper Checking the connection to the
BizTalk Management Database: BizTalkMgmtDb on server ABCDEF\BIZTALKDB 2014-05-27 12:49:44:7273 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BizTalkMgmtDb on server ABCDEF\BIZTALKDB is not compatible. 2014-05-27
12:49:44:7313 [Info] BAMTools Found Microsoft SQL Server installed with version 10.50.1600.1. 2014-05-27 12:49:44:7313 [Info] BAMTools Microsoft SQL Server 2008 with SP1 or higher is installed on server ABCDEF\BIZTALKDB. 2014-05-27 12:49:44:7313 [Info] BAMTools
Microsoft SQL Server 2008 with SP1 or higher is installed on: ABCDEF\BIZTALKDB [2014-05-27 12:49:44:0932 Info ConfigHelper] SQL Server name is: ABCDEF [2014-05-27 12:49:44:0945 Info ConfigHelper]         Validated
SQL credentials for user: SSPI on computer: ABCDEF\BIZTALKDB 2014-05-27 12:49:44:9473 [Info] CfgExtHelper Connecting to the BAM Primary Import Table Database BAMPrimaryImport on server ABCDEF\BIZTALKDB 2014-05-27 12:49:44:9523 [Info] CfgExtHelper The BAM Primary
Import Database found from the BizTalk Management Database BAMPrimaryImport on server ABCDEF\BIZTALKDB is not compatible.        Validated SQL credentials for user: SSPI on computer: ABCDEF\BIZTALKDB 2014-05-27 12:49:44:9813
[Info] CfgExtHelper Connecting to the BAM Primary Import Table Database BAMPrimaryImport on server ABCDEF\BIZTALKDB 2014-05-27 12:49:44:9843 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BAMPrimaryImport on
server ABCDEF\BIZTALKDB is not compatible. [2014-05-27 12:49:44:0984 Info BAMConfigWizExt] Leaving function: CBAMConfigWizExt::ValidateFeature [2014-05-27 12:49:44:0987 Info Configuration Framework]BAMToolsControl InitializeControls() [2014-05-27 12:49:44:0991
Info Configuration Framework]BAMToolsControl Load() [2014-05-27 12:49:44:0996 Info Configuration Framework]BAMPortalControl InitializeControls() [2014-05-27 12:49:45:0005 Info Configuration Framework]BAMPortalControl Load() [2014-05-27 12:49:45:0008 Info EDIAS2Config]
Entering function EDIAS2Config::GetFeatureConfig [2014-05-27 12:49:45:0010 Info EDIAS2Config] Leaving function EDIAS2Config::GetFeatureConfig [2014-05-27 12:49:45:0011 Info Configuration Framework]EDIAS2Control InitializeControls [2014-05-27 12:49:45:0022
Info Configuration Framework]EDIAS2Control Load [2014-05-27 12:49:45:0024 Info BAMConfigWizExt] Entering function: CBAMConfigWizExt::GetFeatureConfig [2014-05-27 12:49:45:0026 Info BAMConfigWizExt] Building feature XML for: BAMPortal [2014-05-27
12:49:45:0028 Info ConfigHelper]         Feature: WMI is installed 2014-05-27 12:49:45:0283 [Info] BAMTools Updates server ABCDEF\BIZTALKDB. 2014-05-27 12:49:45:0283 [Info] BAMTools Splitting the server name:
ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0283 [Info] BAMTools Split the server name ABCDEF\BIZTALKDB into server ABCDEF\BIZTALKDB and port . 2014-05-27 12:49:45:0283 [Info] BAMTools Updated server name ABCDEF\BIZTALKDB to ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0283
[Info] CfgExtHelper Checking the connection to the BizTalk Management Database: BizTalkMgmtDb on server ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0333 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BizTalkMgmtDb on
server ABCDEF\BIZTALKDB is not compatible. 2014-05-27 12:49:45:0343 [Info] BAMTools Updates server ABCDEF\BIZTALKDB. 2014-05-27 12:49:45:0343 [Info] BAMTools Splitting the server name: ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0343 [Info] BAMTools Split the server
name ABCDEF\BIZTALKDB into server ABCDEF\BIZTALKDB and port . 2014-05-27 12:49:45:0343 [Info] BAMTools Updated server name ABCDEF\BIZTALKDB to ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0343 [Info] CfgExtHelper Connecting to the BAM Primary Import Table Database
BAMPrimaryImport on server ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0373 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BAMPrimaryImport on server ABCDEF\BIZTALKDB is not compatible. 2014-05-27 12:49:45:0383 [Info]
BAMPortal Determining version of IIS. 2014-05-27 12:49:45:0383 [Info] BAMPortal Opening local registry key: SOFTWARE\Microsoft\InetStp 2014-05-27 12:49:45:0383 [Info] BAMPortal Getting registry value: MajorVersion 2014-05-27 12:49:45:0383 [Info] BAMPortal
IIS version is: 7 2014-05-27 12:49:45:0393 [Info] BAMPortal Determining version of IIS. 2014-05-27 12:49:45:0393 [Info] BAMPortal Opening local registry key: SOFTWARE\Microsoft\InetStp 2014-05-27 12:49:45:0393 [Info] BAMPortal Getting registry value: MajorVersion
2014-05-27 12:49:45:0393 [Info] BAMPortal IIS version is: 7 [2014-05-27 12:49:45:0040 Info BAMPortal] Built feature XML: <Configuration><Feature Name="BAMPortal" DisplayName="BAM Portal" Version="1.0" Description="The
Business Activity Monitoring (BAM) Portal is used to query individual instance data stored in the Tracking database. Each BAM Query Web Service corresponds to one SQL database."><NTService ID="{C08C5A6C-53FB-41bd-A1CE-FD7209FD16F4}" DisplayName="BAM
Management Web Service user" Description="Windows account that will have permissions to access the data in the BAM Primary Import Database during Business Activity searches." ReadOnly="false"><UserName></UserName><Domain></Domain><Password>*Hidden*</Password></NTService><NTService
ID="{FAAB0AD8-C414-4735-91E5-3DCEC8CB96A8}" DisplayName="BAM Application Pool Account" Description="Identity of the BAM Application Pool. " ReadOnly="false"><UserName></UserName><Domain></Domain><Password>*Hidden*</Password></NTService><NTCredential
ID="{e8118b16-0585-41a4-99bb-6d8a30570fcc}" DisplayName="BAM Portal Users" Description="The user accounts under which the BAM portal services run." ReadOnly="false"><NTAccount ScopeType="103" UpLevelFlags="676"
DownLevelFlags="2147483654">Everyone</NTAccount></NTCredential><WebSite ID="{DA1ABC72-465B-4953-ADD7-98CEA6F4E503}" DisplayName="BAM Portal Web &Site:" Description="Specify the name of the web site
under which the BAM Portal virtual directory will be created." ReadOnly="false"><WebSiteName>Default Web Site</WebSiteName></WebSite></Feature></Configuration> [2014-05-27 12:49:45:0041 Info BAMConfigWizExt]
Leaving function: CBAMConfigWizExt::GetFeatureConfig [2014-05-27 12:49:45:0042 Info Configuration Framework]BAMPortalControl InitializeControls() [2014-05-27 12:49:45:0050 Info Configuration Framework]BAMPortalControl Load() [2014-05-27 12:49:45:0052 Info
RulesEngine] Entering function GetFeatureConfig [2014-05-27 12:49:45:0053 Info RulesEngine] Management database (server = 'ABCDEF\BIZTALKDB', database = 'BizTalkMgmtDb') doesn't exist [2014-05-27 12:49:45:0053 Info RulesEngine] No previously configured Rules
database discovered [2014-05-27 12:49:45:0055 Info RulesEngine] Unable to access 'RuleEngineUpdateService'. [2014-05-27 12:49:45:0056 Info RulesEngine] Leaving function GetFeatureConfig [2014-05-27 12:49:45:0057 Info Configuration Framework]RulesEngineControl
InitializeControls [2014-05-27 12:49:45:0064 Info Configuration Framework]RulesEngineControl Load [2014-05-27 12:49:45:0066 Info EDIAS2Config] Entering function EDIAS2Config::GetFeatureConfig [2014-05-27 12:49:45:0068 Info EDIAS2Config] Leaving function EDIAS2Config::GetFeatureConfig
[2014-05-27 12:49:45:0068 Info Configuration Framework]EDIAS2Control InitializeControls [2014-05-27 12:49:45:0079 Info Configuration Framework]EDIAS2Control Load [2014-05-27 12:49:46:0485 Info Configuration Framework]Entering function ValidateSQLCredentials.
[2014-05-27 12:49:46:0497 Info Configuration Framework]Leaving function ValidateSQLCredentials. [2014-05-27 12:49:46:0498 Info BtsCfg] Entering function: CBtsCfg::ValidateFeature [2014-05-27 12:49:46:0501 Info BtsCfg]       Validating
feature: WMI [2014-05-27 12:49:46:0501 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0502 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0509 Info ConfigHelper]         Feature:
Engine is installed [2014-05-27 12:49:46:0517 Info ConfigHelper] SQL Server name is: ABCDEF [2014-05-27 12:49:46:0523 Info ConfigHelper]         Validated SQL credentials for user: SSPI on computer:
ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0543 Info ConfigHelper]         Executed SQL statement on database: master on computer: ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0549 Info ConfigHelper]         Did
not find existing database: BizTalkMgmtDb on computer: ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0550 Info BtsCfg] Leaving function: CBtsCfg::ValidateFeature [2014-05-27 12:49:46:0551 Info Configuration Framework]Entering function ValidateSQLCredentials.
[2014-05-27 12:49:46:0552 Info Configuration Framework]Leaving function ValidateSQLCredentials. [2014-05-27 12:49:46:0552 Info BtsCfg] Entering function: CBtsCfg::ValidateFeature [2014-05-27 12:49:46:0554 Info BtsCfg]       Validating
feature: WMI [2014-05-27 12:49:46:0554 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0554 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0559 Info ConfigHelper]         Feature:
Engine is installed [2014-05-27 12:49:46:0565 Info ConfigHelper] SQL Server name is: ABCDEF [2014-05-27 12:49:46:0571 Info ConfigHelper]         Validated SQL credentials for user: SSPI on computer:
ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0582 Info ConfigHelper]         Executed SQL statement on database: master on computer: ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0588 Info ConfigHelper]         Did
not find existing database: BizTalkMsgBoxDb on computer: ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0589 Info BtsCfg] Leaving function: CBtsCfg::ValidateFeature [2014-05-27 12:49:46:0589 Info Configuration Framework]Entering function ValidateSQLCredentials.
[2014-05-27 12:49:46:0590 Info Configuration Framework]Leaving function ValidateSQLCredentials. [2014-05-27 12:49:46:0590 Info BtsCfg] Entering function: CBtsCfg::ValidateFeature [2014-05-27 12:49:46:0592 Info BtsCfg]       Validating
feature: WMI [2014-05-27 12:49:46:0593 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0593 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0597 Info ConfigHelper]         Feature:
Engine is installed [2014-05-27 12:49:46:0605 Info ConfigHelper] SQL Server name is: ABCDEF [2014-05-27 12:49:46:0611 Info ConfigHelper]         Validated SQL credentials for user: SSPI on computer:
ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0621 Info ConfigHelper]         Executed SQL statement on database: master on computer: ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0626 Info ConfigHelper]         Did
not find existing database: BizTalkDTADb on computer: ABCDEF\BIZTALKDB [2014-05-27 12:50:01:0427 Info ConfigHelper]         Did not find existing database: BizTalkMsgBoxDb on computer: ABCDEF\BIZTALKDB [2014-05-27
12:50:01:0428 Info BtsCfg] Leaving function: CBtsCfg::ValidateFeature [2014-05-27 12:50:01:0429 Info Configuration Framework]Entering function ValidateSQLCredentials. [2014-05-27 12:50:01:0430 Info Configuration Framework]Leaving function ValidateSQLCredentials.
[2014-05-27 12:50:01:0431 Info BtsCfg] Entering function: CBtsCfg::ValidateFeature [2014-05-27 12:50:01:0433 Info BtsCfg]       Validating feature: WMI [2014-05-27 12:50:01:0433 Info BtsCfg] Entering function:
CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:01:0433 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:01:0437 Info ConfigHelper]         Feature: Engine is installed [2014-05-27
12:50:01:0443 Info ConfigHelper] SQL Server name is: ABCDEF [2014-05-27 12:50:01:0449 Info ConfigHelper]         Validated SQL credentials for user: SSPI on computer: ABCDEF\BIZTALKDB [2014-05-27 12:50:01:0460
Info ConfigHelper]        Executed SQL statement on database: master on computer: ABCDEF\BIZTALKDB [2014-05-27 12:50:01:0465 Info ConfigHelper]         Did not
find existing database: BizTalkDTADb on computer: ABCDEF\BIZTALKDB [2014-05-27 12:50:05:0876 Info Configuration Framework [2014-05-27 12:50:05:0881 Info Configuration Framework]Configuring feature: WMI [2014-05-27 12:50:05:0887 Info BtsCfg] Entering
function: CBtsCfg::ConfigureFeature [2014-05-27 12:50:05:0889 Info BtsCfg]       Configuring feature: WMI [2014-05-27 12:50:05:0890 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:05:0890
Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:05:0891 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:05:0897 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0898 Info BtsCfg]
Leaving function: CWMI::Connect [2014-05-27 12:50:05:0898 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btscfg.cpp(1676): FAILED hr = 8004100e [2014-05-27 12:50:05:0899 Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature [2014-05-27
12:50:05:0900 Info BtsCfg]       Unconfiguring feature: WMI [2014-05-27 12:50:05:0900 Warning BtsCfg] BTS management server or DB names are not found in the registry. [2014-05-27 12:50:05:0901 Info BtsCfg]
Entering function: CWMI::StopHostInstance [2014-05-27 12:50:05:0901 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:05:0905 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0905 Info BtsCfg] Leaving function:
CWMI::Connect [2014-05-27 12:50:05:0906 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1542): FAILED hr = 8004100e [2014-05-27 12:50:05:0906 Error BtsCfg] Invalid namespace [2014-05-27 12:50:05:0907 Info BtsCfg] Entering
function: CWMI::UnMapHost [2014-05-27 12:50:05:0907 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:05:0910 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0911 Info BtsCfg] Leaving function: CWMI::Connect
[2014-05-27 12:50:05:0911 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1691): FAILED hr = 8004100e [2014-05-27 12:50:05:0912 Error BtsCfg] Invalid namespace [2014-05-27
12:50:05:0912 Info BtsCfg] Instantiating IBTSMsgBoxPerformance object [2014-05-27 12:50:06:0008 Info BtsCfg] Calling IBTSMsgBoxPerformance::UninstallArtifacts Exception
in CounterManager.UninstallArtifacts when uninstalling the perf counter instances. The exception details are:  Source of exception: System Message:
Cannot delete Performance Category because this category is not registered or is a system category. Stack trace: at System.Diagnostics.PerformanceCounterCategory.Delete(String
categoryName)   at Microsoft.BizTalk.MsgBoxPerfCounters.MgmtDbAccessEntity.UninstallInstances(Boolean regularUninstall)
at Microsoft.BizTalk.MsgBoxPerfCounters.CounterManager.UninstallArtifacts(Boolean regularUninstall, String logFileName) [2014-05-27 12:50:06:0165 Info BtsCfg] Stopping Tracing [2014-05-27 12:50:06:0165 Info BtsCfg]
Entering function: CWMI::DeleteServer [2014-05-27 12:50:06:0166 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:06:0169 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:06:0170 Info BtsCfg] Leaving function:
CWMI::Connect [2014-05-27 12:50:06:0170 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1341): FAILED hr = 8004100e [2014-05-27 12:50:06:0171 Error BtsCfg] Invalid namespace [2014-05-27 12:50:06:0171 Info BtsCfg] Entering
function: CWMI::UnConfigureGroup [2014-05-27 12:50:06:0171 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:06:0174 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:06:0175 Info BtsCfg] Leaving function: CWMI::Connect
[2014-05-27 12:50:06:0175 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1062): FAILED hr = 8004100e [2014-05-27 12:50:06:0176 Error BtsCfg] Invalid namespace [2014-05-27 12:50:06:0176 Info BtsCfg] Leaving function: CBtsCfg::UnConfigureFeature
[2014-05-27 12:50:06:0177 Info BtsCfg] Leaving function: CBtsCfg::ConfigureFeature [2014-05-27 12:50:06:0177 Warning Configuration Framework]Feature failed to configure: WMI. [2014-05-27 12:50:06:0471 Info Configuration Framework]Configuration Summaries:
[2014-05-27 12:50:06:0472 Error Configuration Framework]Feature: [Group] Failed to configure with error message [Error -2147217394 occurred configuring feature WMI] [2014-05-27 12:50:06:0472 Error Configuration Framework]Feature: [BizTalk Runtime] Failed to
configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.] [2014-05-27 12:50:06:0472 Error Configuration Framework]Feature: [BAM Tools] Failed to configure with error message [Feature is skipped due to
dependent feature (Group) failed to configure correctly.] [2014-05-27 12:50:06:0473 Error Configuration Framework]Feature: [BAM Portal] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-05-27 12:50:06:0473 Info Configuration Framework]   Feature: SSOServer,Engine      Configuration Enabled: yes            Sub UI: no       Configured:
yes [2014-05-27 12:50:06:0473 Info Configuration Framework]   Feature: SSOServer,Engine      Configuration Enabled: no            Sub UI: yes      Configured:
yes [2014-05-27 12:50:06:0474 Info Configuration Framework]   Feature: WMI   Configuration Enabled: yes      Sub UI: no            Configured:
no [2014-05-27 12:50:06:0474 Info Configuration Framework]   Feature: Engine,BTSCfg          Configuration Enabled: no            Sub
UI: no       Configured: no [2014-05-27 12:50:06:0474 Info Configuration Framework]   Feature: RulesEngine   Configuration Enabled: no        Sub UI: no  Configured:
no [2014-05-27 12:50:06:0474 Info Configuration Framework]   Feature: MOT   Configuration Enabled: yes      Sub UI: no           Configured:
no [2014-05-27 12:50:06:0475 Info Configuration Framework]   Feature: BAMTools       Configuration Enabled: no        Sub UI: no  Configured: no [2014-05-27
12:50:06:0475 Info Configuration Framework]   Feature: BAMTools       Configuration Enabled: no        Sub UI: yes Configured: no [2014-05-27 12:50:06:0475 Info
Configuration Framework]   Feature: BAMPortal       Configuration Enabled: no        Sub UI: no  Configured: no [2014-05-27 12:50:06:0476 Info Configuration
Framework]   Feature: MsEDIAS2      Configuration Enabled: no        Sub UI: no Configured: no [2014-05-27 12:50:06:0476 Info Configuration Framework]Leaving function
ConfigureFeatures(). [2014-05-27 12:50:06:0477 Info Configuration Framework]Entering function WizardStep_NextStepChanged. [2014-05-27 12:50:06:0481 Info Configuration Framework]Entering function ConfigWizardResult_Load. [2014-05-27 12:50:06:0492 Info Configuration
Framework]Leaving function ConfigWizardResult_Load. [2014-05-27 12:50:06:0510 Info Configuration Framework]Leaving function WizardStep_NextStepChanged. [2014-05-27 12:50:09:0512 Info Configuration Framework]Displaying information notification to user. Message:
<Exception Message="Error -2147217394 occurred configuring feature WMI" Source="" HelpID="" />

It is the section above the one you highlighted and I reproduce below which IMHO is the root cause
--------------from your post
Configuring feature: WMI [2014-05-27 12:50:05:0890 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:05:0890 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:05:0891 Info BtsCfg] Entering
function: CWMI::Connect [2014-05-27 12:50:05:0897 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0898 Info BtsCfg] Leaving function: CWMI::Connect [2014-05-27 12:50:05:0898 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btscfg.cpp(1676):
FAILED hr = 8004100e [2014-05-27 12:50:05:0899 Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature [2014-05-27 12:50:05:0900 Info BtsCfg]       Unconfiguring feature: WMI [2014-05-27 12:50:05:0900
Warning BtsCfg] BTS management server or DB names are not found in the registry. [2014-05-27 12:50:05:0901 Info BtsCfg] Entering function: CWMI::StopHostInstance [2014-05-27 12:50:05:0901 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27
12:50:05:0905 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0905 Info BtsCfg] Leaving function: CWMI::Connect [2014-05-27 12:50:05:0906 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1542): FAILED hr
= 8004100e [2014-05-27 12:50:05:0906 Error BtsCfg] Invalid namespace [2014-05-27 12:50:05:0907 Info BtsCfg] Entering function: CWMI::UnMapHost [2014-05-27 12:50:05:0907 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:05:0910
Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0911 Info BtsCfg] Leaving function: CWMI::Connect [2014-05-27 12:50:05:0911 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1691): FAILED hr = 8004100e [2014-05-27
12:50:05:0912 Error BtsCfg] Invalid namespace
Can you please verify if as part of server features on Windows Server 2008 R2 you have the following features installed?
SNMP Service
SNMP WMI Provider
Additionally while running the configuration you should be using an account with ELEVATED permissions who should also be a member of the Performance Counter Users local group.
Regards.

Configuring groups in LDAP

Hello experts !
I'm trying to configure group in LDAP, and add members to this group :
The group :
~~~~~~~~~
objectClass:     groupOfNames
objectClass:     top
cn:     billingdept
member:     o=ibm,c=us,uid=c0001,ou=people
member:     o=ibm,c=us,uid=c0002,ou=people
member:     o=ibm,c=us,uid=c0003,ou=people
member:     o=ibm,c=us,uid=c0004,ou=people
One of the members (C0004) :
~~~~~~~~~~~~~~~~~~~~~~~~
uid:     c0004
displayName:     David
givenName:     David
objectClass:     inetOrgPerson
objectClass:     top
objectClass:     person
objectClass:     organizationalPerson
userPassword:      [B@5c5e5c5e
ou:     Billing
cn:     Steven Moyer
sn:     Moyer
title:     Billing worker
The Problem : When i give permission in Websphere for a specific user, it's OK and the user can log in.
BUT, When I give a permission in Websphere for a group, websphere does\n't allow the group's users to log in, because Websphere doesn't recognize the user i'm tring to login with, as a user of this group.
So maybe this is not the way i should configure group.
can anyone help ?

member DN appears to be incorrect but i cant confirm unless u provide your DIT

Can't configure group policy

ZCM 11.2.3a
Windows 7
Firefox 17.0.11 ESR
Per the docs:
http://www.novell.com/documentation/...a/bau5n2g.html
I have installed the helper application. But if I click on Configure,
I get a Configure Group Policy settings dialog with Upload and Cancel
buttons and nothing else happens. Am I missing something? Why doesn't
this work?
Ken

Originally Posted by ketter
On Wed, 19 Mar 2014 20:06:21 GMT, Shaun Pond
<[email protected]> wrote:
>KeN,
>
>sure this isn't happening? http://www.novell.com/support/kb/doc.php?id=3523946
On a whim, I just tried running Firefox with "Run as Administrator".
Suddenly things start working. Might be nice if the docs mentioned
the need for that. I think I will make a comment on the doc page.
KeN
I didn't even know you could configure GPO in Firefox
Thx for reporting back the solution and if you have time then please submit a doc feedback on that page.
Thomas

IOS Configuration Profile Reference outdated

Hi,
I'm currently writing a technical draft iPhone policy for our enterprise. The iPhone configuration utility is a nice tool to create such a policy but it is not really usable for documentation of the different directives. Therefore I was looking for another documentation. The «iOS Configuration Profile Reference» seems to be a nice document, since it describes every single directive.
Unfortunately I had to find out, that there are much more parameters in the current iPhone configuration Utility 3.3 (274) then specified in the iOS Configuration Profile Reference - even it's version is dated to 2011-03-08.
Does anybody know if there is a more current Version of this document, or another paper which specifies all possible parameters?
Chris

any one can help to answer the quesiton?

CCW Configuration Group By Site capability

Hi,
Is there any plan to add support to do simple labeling and sections in order to be able to group items inside a large BoM?
ie,
I'm working on a multisite BoM configuration, and I want to be able to create sections inside the Configuration to put together all the items belonging to a site.
I'm pretty sure this was available on netformix, but would be nice to have it on CCW.
I'd like to see something like
SITE 1
     Item 1
     Item 2
     Item n
SITE 2
     Item 1
     Item 2
     Item n
SITE N
Can you share the CCW roadmap and if this feature will be available on a future release?
FBM.

Hi FBM,
Good day!
Thank you for bringing this attention to us.
Please be advised that, above feature (CCW Configuration Group by Site Capability) is not yet available in CCW. If you wish to request for this feature, please send email to [email protected]
as an enhancement issue. However, you will need to fill out a template first and then send it to that alias.
To get the template, we suggest that you create a case with us online at http://www.cisco.com/cisco/psn/web/workspace or by calling 1-800-553-6387 options 2 and 3.
If this is your first time to open a case using Customer Service Central, you will need to sign in to your My Cisco Workspace (http://www.cisco.com/cisco/psn/web/workspace)    and then add the Customer Service Central module to your Workspace to    open and manage your cases online. Help and support documentation is    available on Operations Exchange.
Thanks and Best Regards,
Jen C.
CCW Support

Copying Aironet IOS configuration

I set up one AP-1041 that runs standalone IOS. No controller. I have three more that I want to copy the setup configuration over to. I have the right document, but need someone to help tell me which commands will get my set configuration from AP one FTP'd to my computer and how to copy that configuration back to another AP of the same model. This way I will only need to tweak a couple settings on the additional AP's instead of starting from scratch.
Thanks in advance,
Kirk
What I'm referencing starts in about section 20-10
http://www.cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b.pdf

Hi Kirk,
To copy the configuration from AP to PC you could run below command. My preference would be to use tftp rather than tftp.
copy system:running-config tftp://x.x.x.x/ap.txt or copy running-config tftp://x.x.x.x/ap.txt
(where x.x.x.x is the ip address of tftp server and ap.txt is configuration file name)
Top copy from PC to AP you could use below command.
copy tftp://x.x.x.x/AP.txt startup-config (where x.x.x.x is the ip address of tftp server and ap.txt is configuration file name)
Ensure that you are able to ping the tftp ip address from the AP before trying the copy procedure.
Hope that helps.
Regards
Najaf
Please rate when applicable or helpful !!!

[solved] KDEmod-4 Taskbar configuration: "group similar tasks" and oth

Hi,
where can I configure the taskbar behaviour in KDEmod 4.2.4?
I'm particularly interested in:
1.) seing ONLY the tasks of the current desktop
2.) seing EACH task on the current desktop
In KDE 3.5 I could configure these options in kcontrol:
Desktop > Taskbar
The options were called:
1.) Show windows from all desktops (deactivated)
2.) Group similar tasks (Never)
Where can I configure this in KDEmod 4?
Last edited by cyclohexan (2009-07-30 07:53:01)

Hi cyclohexan,
here is a more detailed description:
1) Close enough windows that there is some unused space on the right side in the task bar.
2) Right click on the unused part of the task bar and you should see the following context menu:
3) Clicking on "Task Manager Settings" should then bring you to this dialog:
I guess this should also work in KDEmod.
Regards,
jamesbond007.
Last edited by jamesbond007 (2009-07-29 09:16:33)

11g: Add And Configure Group

Before OBIEEE 11g, I can create new user and configure its role in the Administration,which means different preson can see different interface or data, for example, A person can see "China" region data,but can not see "America" region data, however, B preson can see "America" region data.
But when I use OBIEE 11g, I do not know how to create and configure role. If you know the method,please help me. Thanks!

According to your link, I create new user named "A" belong to new group named "Beijing" in the BIEE console, and in the EM I also create new application role named "Beijing" that contains the "Beijing" group, then restart the server. Finally I filter the City column into "Beijing" in Administration-->Appliction roles-->"Beijing"-->Permissions-->Data filter, but when I login into the answer through A user, I see all data in the city column, do not only view "Beijing" data .
If you know the method for solving it, please help me. Thank you!

0x87D11388 when deploying iOS Configuration Profile

I am trying to deploy a Configuration Profile from the iPhone Configuration Utility, and then import it to Microsoft Intune.
In Intune, i can see it fails with the error code 0x87D11388. But I can not find anything on this.
My Configuration Profile only contains WiFi-settings:
Thanks
Mr. Thomas

Hi,
I haven't tried that actually but the error translates to:
"iOS device is currently busy" which doesn't help much either, does it work with other profiles or is it just this one?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

IOS - object-group service

Hello Guys,
my question is do below access-lists operate the same way? I am confused about source and destination ports in object-group based acl.
ip access-list extended 101
deny tcp any any eq bgp
deny tcp any eq bgp any
deny tcp any any eq ftp
deny tcp any eq ftp any
service object group services
tcp eq bgp
tcp eq ftp
ip access-list extended 101
deny object-group service any any
Following question is if the purpose is to deny any traffic where source port is bgp (e.g. deny any eq bgp any), how it can be configured using object group service.
Thanks in advance
Regards

Hi,
Have you tried configuring it like this
object-group service GATEWAY-SERVICES
service-object tcp eq 88
service-object tcp eq 135
service-object tcp eq 445
service-object tcp eq ldaps
service-object tcp eq 3268
service-object tcp eq 3269
service-object tcp eq 53
service-object udp eq 53
service-object tcp eq 389
service-object udp eq 389
service-object tcp eq 464
service-object udp eq 464
service-object tcp range 49152 65535
service-object udp eq 49152 65535
access-list dmzAccess permit object-group GATEWAY-SERVICES host 172.26.11.10 host 10.16.11.203
I am not sure if it was only after software 8.3+ that the command under the actual "object-group" was of format "service-object tcp source" / "service-object tcp destination" (or the same for UDP)
- Jouni

How to configure group policy for emet via a command line

I have been tasked with installing emet on 50 servers that I only have access to with our patching server (so I can't remote in and open the gpedit gui). I can get it to install, but now the problem that I'm facing is I need to enable 6 of the group policies
for emet. Is there a way to do this while installing it? or a way to do it after the install?

cmd line you need to deal with is in the C:\Program Files (x86)\EMET 4.1 folder
specifically emet_conf --refresh would tell the systems to pull in the settings from a GPO they have already applied.
In a non - SCCM environment I would probably recommend using group policy preferences and create a task scheduler item on your servers that runs emet_conf --import
\\fileserver\settingsfile.xml on some sort of automated basis. Then you can just configure a client like you need and run the emet_conf --export
\\fileserver\settingsfile.xml whenever you need to change a mitigation etc and the clients will pick up on the change on their next run of the task scheduler item.
In general installing on servers isn't a great idea and is not the intended use case for emet however if you are DoD/Gov then DISA has mandated it so won't argue there. There's also the people that still have Internet access from servers so then it
would make sense in that environment as well.
CSS Security Support Engineer (FCS/MBSA/WUA/Incident Response/FOPE) Check out my blog http://blogs.technet.com/kfalde or better yet check out http://technet.com/wiki and start contributing :)

Need help Configuring Group Accounts in file_grpact_fstmt.csv file.

Hi,
I'm a technical person trying to configure Financial Analytics for the first time with very little help from Finance functional person.we've Oracle R12 implemented in our organization.
I need to know about the configuration of file_grpact_fstmt.csv file.
As i can see from our Chart of accounts, all our group accounts fall under these 5 categories
Ownership/Stockholder's Equity
Assets
Expense
Revenue
Liability
so now how do i categorize these group accounts in file_grpact_fstmt.csv file under the Financial Statement Items codes like AP,AR,COGS,REVENUE,TAX,OTHERS?
Please help.
Somewhere in the forum i read that (please check the link below), liability accounts should be marked as "AP" and expense accounts will go as "OTHER" ..if thats correct then how do i mark the Equity,Assets and Revenue accounts?
AP Transaction Status POSTED/UNPOSTED
Edited by: Oradev on Feb 20, 2011 9:18 PM

Hi,
There is not a real rule-of-thumb you can use here. Without knowledge of how the chart-of-accounts is implemented or used by your company's financial team, it is near to impossible to correctly configure the group account codes. In my experience, the financial controller(s) is/are the one(s) best equiped to assist with this issue.. I would strongly advice you to include his/her/them in configuring Financial Analytics..
Good luck!
Edited by: m.siliakus on Feb 21, 2011 3:17 PM
Edited by: m.siliakus on Feb 21, 2011 3:18 PM

IOS 6 Group Contacts

When selecting "Groups" in iOS 6 Contacts all groups appear with a "checkmark" on the right side.
Clicking on an individual "Contact" the checkmark dissapears but does not open, therefore not allowing
you access to the contacts within that "Group". Anyone else experiencing this problem ?
Thank you, Chris C.

And it is so unintuitive and obscure that heaps of people have ended up here, including me, as we couldn't figure out how it is supposed to work!!!
Send you feedback to Apple and maybe we can get this changed.
http://www.apple.com/feedback/iphone.html
I'm going back to 5.1.1.
This is what I sent
"This new implementation of how to get into groups in Contacts in iOS6 is just ridiculous.
I spent ages trying to work out what was wrong, I restored the software, ended up at the Apple discussion forums and found out how it was supposed to work. Some clever person finally worked out how to work it.
This is so UNINTUITIVE and so UNLIKE any other aspect of the OS that people are flocking to the Apple discussions in droves thinking there is something wrong with Contacts because they do not realise how it is supposed to work.
If you are going to implement weird way out ways of doing things like this then you better start printing out manuals to hand out with the phones, because nobody is going to understand how to use them.
It stumped me and I was an Apple technician in a school for 15 years!!!!
Please, please change this back. You are making it so hard to use for ALL users for what gain?? So the rare individual who wants to view more that one group at once can???
If you really want to view more than one group at once you can create a new group with them all in it."

IOS Configurator Group

Similar Messages

Maybe you are looking for